2012 Hyundai Elantra Ignition and Tune-Up Products

Below you will find various in-demand Hyundai Ignition and Tune-Up Products, components and accessories for your 2012 Elantra. Advance Auto Parts has popular Elantra parts like Ignition Sensors, Ignition Boots, Spark Plugs and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Elantra model years including 2011, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 and more. Select a category of 2012 Hyundai Elantra Ignition and Tune-Up Products below and start saving instantly.

Popular 2012 Hyundai Elantra Ignition and Tune-Up Products Categories

Ignition Starter Switches

Spark Plug Tube Seals

Essential Ignition and Tune-Up Products for 2012 Hyundai Elantras

from

$55.99

NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$58.99

Pc Wire Set 96-11 Hkia 4-Cyl

from

$91.08

NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Product Features:

OE-Equivalent.
OEM style connectors for easy Installation.
Superior Firing and Fuel Savings
Outstanding Durability and Performance
Excellent Noise Suppression
Numbered for easy cylinder identification.
High quality EPDM and Silicone coverings.

from

$87.99

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$62.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$73.86

OE-Equivalent.
OEM style connectors for easy Installation.
Superior Firing and Fuel Savings
Outstanding Durability and Performance
Excellent Noise Suppression
Numbered for easy cylinder identification.
High quality EPDM and Silicone coverings.

from

$73.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$46.99

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$68.72

The VEMO OE quality knock sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as first equipment.

Product Features:

OEM quality direct fit application
Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
Mounting hole is the same size as OE
Maintains OE specifications for frequency response

from

$30.99

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$124.10

The Forecast OE quality knock sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as first equipment.

Product Features:

OEM quality direct fit application
Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
Mounting hole is the same size as OE
Maintains OE specifications for frequency response

from

$43.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$53.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$8.43

ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers.

Product Features:

Superb quality and precision manufacturing process to ensure overall sealing dependability
Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
Manufactured to exact OEM specifications

from

$41.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$121.99

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$141.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$35.99

from

$41.07

Ignition Switch

from

$45.99

HL Mando is the leading original equipment manufacturer utilizing its state-of-art technology and various quality tests to offer customers great satisfaction and safety. HL Mando is producing a variety of Direct Ignition Coils with the latest equipment that boasts highest quality from passenger vehicles to commercial vehicles. With the state-of-the-art electronic control technology that maximizes the safety and convenience of the driver and passenger, HL Mando is being recognized for its high quality and supply system by world’s best automakers. In addition, obtaining ISO/TS 16949 certification proves excellent quality and reliability of suspension parts. – We Are OE!

Product Features:

Direct Original Equipment Replacement
Tested for Quality, Durability, and Reliability
Manufactured in Korea

from

$95.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$146.83

Ignition Coil

from

$124.99

As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

First Time Fit
Built to DENSO Original Equipment Standards

from

$4.79

NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

from

$4.29

Manufactured to OEM quality standards.

Product Features:

OEM specified special ground electrode configuration
Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
Wide range of part numbers for thousands of applications, including classic and collector cars
Lasts twice as long as most conventional plugs
100% pre-fired to assure reliable operation
U-Groove Conventional

from

$4.99

Manufactured to OEM quality standards.

Product Features:

OEM specified special ground electrode configuration
Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
Wide range of part numbers for thousands of applications, including classic and collector cars
Lasts twice as long as most conventional plugs
100% pre-fired to assure reliable operation
U-Groove Conventional

from

$14.11

4X longer service life compared to standard copper plugs Bosch OE Finewire Iridium is engineered to deliver both High performance and long life. The Bosch Iridium Plug provides original equipment design, materials and processes represent the best of OE technology. The ultra fine wire design and laser welded tapered ground electrode deliver optimum performance, while the iridium center electrode and platinum ground electrode help it to go the distance. Center Electrode Core Material: Nickel-Yttrium and Copper and Iridium – Center Electrode Tip Material: Iridium – Ground Electrode Tip Material: Nickel-Yttrium and Iridium

Product Features:

OE design for optimum fit and function
Center electrode is an ultra fine wire design.
Provides broader heat range to resist pre-ignition and fouling
Delivers exceptional ignitability and performance
Tapered shape ground electrode
Laser welded iridium-platinum alloy inlay
Nickel-plated shell with rolled threads
Anti-seize and corrosion protection

from

$17.49

NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
Enhanced Fuel Efficiency and Lower Emissions: These spark plugs contribute to improved fuel efficiency and reduced emissions, making them an eco-friendly choice.
Superior Anti-Fouling and Stable Idling: The advanced design provides stable idling and superior resistance to fouling, ensuring consistent engine performance.

Upgrade your 2012 Hyundai Elantra with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2012 Hyundai Elantra, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Hyundai or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Elantra functioning at its best. At Advance Auto Parts, we offer a wide selection of 63 Ignition and Tune-Up Products for the 2012 Hyundai Elantra, designed to meet your needs without breaking the bank. From Ignition Sensor replacements to Ignition Boots upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 2012 Hyundai Elantra at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $3.49 to $279.99, with an average price of $37.16. Our 63 Ignition and Tune-Up Products in stock come from 17 trusted brands, so you’re sure to find the right part for your 2012 Hyundai Elantra without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Hyundai Elantra, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like Autolite, NGK, DENSO, and more. Autolite Ignition and Tune-Up Products start at just $3.49 and boast an impressive 5 stars average rating from customers. NGK and DENSO also bring quality to the table, with Ignition and Tune-Up Products available starting at $3.99, and at an average 5 stars rating. With 2,590 customer reviews and counting, our 2012 Hyundai Elantra Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Hyundai Elantra is always ready to roll. We’re committed to providing you with everything you need to keep your Elantra in top shape, all in one place. Start shopping confidently below for your 2012 Hyundai Elantra!

Best-Selling Ignition Sensors for 2012 Hyundai Elantras

Enhance the driving experience in your Hyundai with 1 quality Ignition Sensor components, starting at $52.99.

show more show less

from

$52.99

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

Most Popular 2012 Hyundai Elantra Ignition Boots

Customize your Hyundai with 1 Ignition Boots products like Spark Plug Boots, all priced under $58.99.

show more show less

from

$58.99

Pc Wire Set 96-11 Hkia 4-Cyl

Top Picks for 2012 Hyundai Elantra Spark Plugs

Upgrade Hyundai Elantras with top-quality Spark Plugs parts, including 45 OEM and aftermarket selections for your 2012 model.

show more show less

from

$17.49

Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:

Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
Platinum ground electrode for extended life
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Sustained spark performance over 100,000 miles
Lasts up to three times as long as conventional plugs
Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
Iridium Long Life

from

$11.99

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhance fuel efficiency, making them ideal for performance enthusiasts.
Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.
Gasket Seat Type for Secure Fit: The NGK Iridium IX spark plugs feature a gasket seat type, ensuring a secure and reliable fit in your engine.

from

$10.99

Durability of an OE style plug combined with Power & Torque of high performance.

Product Features:

0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Durability of an OE style plug combined with Power & Torque of high performance.
Withstands temperatures greater than 4000░ Fahrenheit
Iridium TT
Ultimate Endurance and Power: The DENSO Iridium TT Spark Plug features a 0.7mm Iridium Tip, ensuring over 100,000 miles of uncompromised performance.
Advanced Twin-Tip Technology: Developed from Original Equipment Specification Super Ignition Plug (SIP) design, combining a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode.
Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
Premium Materials: Features an Iridium Center Electrode Tip and a Flat Seat Type for optimal performance and durability.

from

$19.99

NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and dur

Product Features:

ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: SPE tip & iridium alloy center electrode produce the most advanced OE spark plug technology
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
SPE DESIGN: Square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE SPE iridium alloy plugs

from

$11.99

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs

from

$5.79

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:

SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs

from

$17.49

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
Enhanced Fuel Efficiency and Lower Emissions: These spark plugs contribute to improved fuel efficiency and reduced emissions, making them an eco-friendly choice.
Superior Anti-Fouling and Stable Idling: The advanced design provides stable idling and superior resistance to fouling, ensuring consistent engine performance.

from

$4.99

Manufactured to OEM quality standards.

Product Features:

OEM specified special ground electrode configuration
Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
Wide range of part numbers for thousands of applications, including classic and collector cars
Lasts twice as long as most conventional plugs
100% pre-fired to assure reliable operation
U-Groove Conventional

from

$4.99

The ground electrode is cut-back from the center electrode to provide a gap. The face of the ground electrode is concave to provide a constant gap to the center electrode. This plug is designed use in all aftermarket cylinder heads used in different types of racing venues including oval and road racing.

Product Features:

Opens spark face for better ignitability of flame kernel
Retains less heat, transfers heat to shell faster – reduces risk of pre-ignition
Dyno testing has shown proven power gains
Cut-back ground electrode evolved from practice of grinding back the side electrode

from

$14.99

NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug; Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.

Product Features:

HIGH IGNITABILITY PROJECTED SQUARE PLATINUM ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with a unique cut-back PSPE ground electrode
RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
PSPE DESIGN: Projected square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modern vehicles using OE PSPE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
Enhanced Fuel Burn: Provides a more complete fuel burn, resulting in quicker throttle response, smoother idle, and better cold starts.
Industry-Leading Durability: Ruthenium center electrode ensures exceptional durability and longevity.

from

$15.79

Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:

Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
Platinum ground electrode for extended life
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Sustained spark performance over 100,000 miles
Lasts up to three times as long as conventional plugs
Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
Iridium Long Life
Enhanced Engine Performance: Enjoy more horsepower, faster and easier starts, and fewer misfires under heavy loads, thanks to the advanced properties of DENSO’s Iridium alloy.
Fuel Efficiency: The DENSO Iridium Long Life plug helps in better conservation of fuel, making it an eco-friendly choice for your vehicle.

from

$18.99

NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center elect

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs

from

$11.49

Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).

Product Features:

World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
Patented 360-degree laser welding assembly process
U-groove and taper cut ground electrode to maximize flame propagation.
Withstands temperatures greater than 4000░ Fahrenheit
Burnished nickel plating for high temperature endurance and superior corrosion resistance
Wide range of part numbers for thousands of applications, including classic and collector cars
Iridium Power
Superior Performance: This spark plug requires 5,000 volts less to fire compared to conventional spark plugs, providing maximum performance even under extreme conditions.
Enhanced Horsepower and Efficiency: Experience more horsepower, faster and easier starts, fewer misfires under heavy loads, and improved fuel efficiency with the DENSO Iridium Power spark plug.
Durable Iridium Material: Constructed with a durable iridium center electrode tip and a flat seat type, this spark plug ensures long-lasting performance and reliability.

from

$20.00

NGK’s Laser Iridium Spark Plugs Provide Superior Ignitability and Long Service Life. Fine Wire Iridium Tipped Center Electrode and Fine Wire Platinum Tipped Ground Electrode Ensures Slow Wear Rate Providing Stable Idle, Superior Anti Fouling, Improved Fuel Efficiency and Lower Emissions.

Product Features:

Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
Corrugated Ribs Prevent Flashover
Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
Copper Core Aids in Heat Removal
Triple Seals Prevent Leakage

from

$9.99

Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion
Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance for a longer-lasting spark plug.
Engineered in the USA: Designed with over 100 years of Autolite engineering experience for superior quality and performance.
Proven Track Record: Part of a legacy with over 11 billion spark plugs sold, showcasing trusted performance and reliability.

from

$9.99

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion
Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance for a longer-lasting spark plug.
Designed and Engineered in the USA: Reflects over 100 years of Autolite’s engineering experience and expertise.
Gasket Seat Type: Ensures a secure and proper fit for optimal performance.

from

$4.79

With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite Platinum spark plugs are designed and engineered in the USA to deliver exceptional performance. Featuring a high nickel alloy side electrode that maintains a precise gap and a full platinum tip that ensures virtually no gap erosion, these spark plugs offer long-lasting durability. The necked-down center electrode fires quicker and cleaner with less voltage, resulting in easier starts, quicker acceleration, and improved fuel economy compared to standard plugs.

Product Features:

High nickel alloy side electrode maintains precise gap
Full platinum tip assures virtually no gap erosion for long life
Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
Exceptional Performance: Designed and engineered in the USA, Autolite Platinum Spark Plugs deliver superior performance with over 100 years of engineering expertise and more than 11 billion plugs sold.
Gasket Seat Type: Equipped with a gasket seat type, these spark plugs provide a secure and effective seal for optimal engine performance.

from

$3.49

Autolite® Copper spark plugs deliver quick starts, good fuel economy and smooth acceleration.

Product Features:

One-Piece terminal stud provides a reliable high voltage electrical connection
High alumina multi-rib insulator helps prevent flash-over which can lead to misfires
Heat-fused glass composite resistor center seal provides high performance EMI noise suppression and a 100 percent leak-proof seal
Solid copper core center electrode provides optimal thermal and electrical conductivity for better performance in all driving conditions
High nickel alloy side electrode resists electrical and chemical wear providing excellent durability
2 year limited warranty

from

$6.79

With over 100 years of engineering expertise and over 11 billion plugs sold, Autolite delivers exceptional quality. Designed and engineered in the USA, these spark plugs feature platinum-to-platinum firing, virtually eliminating gap erosion and reducing misfires. The OE design and full-platinum tips on both the center and side electrodes ensure reduced gap wear, while the platinum ball welding process provides a consistent point of contact for enhanced adhesion. This results in optimized engine performance, longer life, and improved fuel economy. The gasket seat type further enhances the plug’s reliability and durability.

Product Features:

Works to optimize engine performance for a longer life and improved fuel economy
OE design
Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
Platinum ball welding process provides a consistent point of contact for enhanced adhesion
Gasket Seat Type: Equipped with a gasket seat type that enhances the spark plug’s reliability and durability.
Proven Quality: Backed by over 100 years of engineering expertise and over 11 billion plugs sold, Autolite delivers exceptional quality and performance.

from

$6.99

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.56 is a 14mm, 0.750 reach plug with a gasket seat. It fits a wide variety of late model applications, especially import. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.

from

$10.49

Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:

OE grade platinum on both center and ground electrodes
Premium shell construction with machine-rolled threads
Superior thermal conductivity
Sustained spark performance over 60,000 miles
Reduced secondary required voltage, increased ignition efficiency
Satisfied customers, reduced shop comebacks
Double Platinum

from

$13.29

Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).

Product Features:

World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
Patented 360-degree laser welding assembly process
U-groove and taper cut ground electrode to maximize flame propagation.
Withstands temperatures greater than 4000° Fahrenheit
Burnished nickel plating for high temperature endurance and superior corrosion resistance
Wide range of part numbers for thousands of applications, including classic and collector cars
Iridium Power

from

$6.79

ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
Pure copper core provides great heat transfer and helps maximize plug durability
Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
Ribless insulator helps optimize plug to boot seal
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$9.79

ACDelco Professional Double Platinum Spark Plugs are premium aftermarket plugs, and are a high quality replacement for many vehicles on the road today. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:

One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$3.99

This spark plug features a platinum twin-tip design and a titanium-enhanced ground strap, ensuring superior performance and longevity. The center electrode tip material is made of platinum, providing excellent durability and consistent spark. Additionally, the flat seat type ensures a secure fit, making it an ideal choice for reliable and efficient ignition in your vehicle.

Product Features:

Platinum Twin-Tip Design: The Denso Platinum TT Spark Plug features a unique twin-tip design, enhancing ignition efficiency and performance.
Titanium-Enhanced Ground Strap: Equipped with a titanium-enhanced ground strap, this spark plug ensures superior durability and longevity.
Platinum Center Electrode Tip: The center electrode tip is made of platinum, providing excellent durability and a consistent spark for reliable ignition.
Superior Performance: Designed for enhanced ignition, this spark plug offers reliable and efficient performance, making it a top choice for vehicle maintenance.

from

$4.49

Dependable Performance, OE Replacement, RC10YC4. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. The Copper Plus design ensures dependable performance and durability, while the copper core center electrode allows for accurate control of heat range, extending the spark plug’s life. Built to ISO and SAE standards, it offers superior corrosion resistance and proven performance. The nickel copper alloy center electrode tip and flat seat type further enhance its reliability, making it an excellent choice for maintaining your engine’s efficiency.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance
Enhanced Conductivity and Heat Control: The Champion Copper Plus Spark Plug features a copper core electrode that provides increased conductivity and heat control, ensuring good overall wear and extending the spark plug’s life.
Reliable Nickel Copper Alloy Tip: Featuring a nickel copper alloy center electrode tip and a flat seat type, this spark plug ensures enhanced reliability and optimal performance for your engine.

from

$4.49

Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance

from

$6.49

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:

Works to optimize engine performance for a longer life and improved fuel economy
OE design
Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
Platinum ball welding process provides a consistent point of contact for enhanced adhesion

from

$10.99

Autolite Iridium Ultra Laser Finewire Spark Plugs are one of our brand’s most technologically advanced products. These spark plugs provide superior durability, more focused ignition with better overall ignitability for optimum performance. Autolite Spark Plugs are the best alternative to OE spark plugs, offering OE fit form and function supporting all foreign and domestic makes and models at a value price. Autolite provides the automotive aftermarket and original equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs in the world.

Product Features:

Autolite Iridium Ultra is an engineered OE replacement iridium spark plug.
A laser-welded 0.5mm pure iridium finewire center electrode provides optimal fuel efficiency, acceleration and focused ignitability.
Nickel-plated shell to resist corrosion.
High-alumina ceramic insulator for increased strength.
Laser welded 0.5mm Iridium finewire center electrode.
Proprietary platinum sidewire technology.

from

$10.99

Optimal Performance, Durability, Ignitability. The Autolite Iridium Ultra is an engineered OE replacement iridium spark plug featuring a laser-welded 0.5mm proprietary iridium alloy finewire center electrode that ensures optimal fuel efficiency, acceleration, and focused ignitability. Its nickel-plated shell resists corrosion, while the high-alumina ceramic insulator provides increased strength. Additionally, the proprietary platinum sidewire technology enhances durability and performance, making it a top choice for reliable ignition. It also features a resistor type and a flat seat type for added compatibility and performance.

Product Features:

Autolite Iridium Ultra is an engineered OE replacement iridium spark plug.
A laser-welded 0.5mm proprietary iridium alloy finewire center electrode provides optimal fuel efficiency, acceleration and focused ignitability.
Nickel-plated shell to resist corrosion.
High-alumina ceramic insulator for increased strength.
Laser welded 0.5mm Iridium finewire center electrode.
Proprietary platinum sidewire technology.

from

$7.79

SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
Economical Upgrade: Ideal for vehicles originally equipped with nickel alloy spark plugs, offering a cost-effective performance boost.
NGK Quality: Trusted brand known for high-quality spark plugs, ensuring long-lasting and dependable performance.

from

$5.79

Champion® Double Platinum Power spark plugs deliver more powerful performance with their premium design. Featuring a platinum center and ground electrode, these spark plugs offer greater wear resistance and maintain a stable operating temperature under all engine loads. The fine-wire center electrode ensures greater ignitability, while the V-trimmed ground electrode promotes sharper spark focus. The exclusive Heat-Active alloy allows the electrodes to reach optimal temperature, ensuring maximum life and performance.

Product Features:

Double Platinum Power – Premium Spark Plug. More Powerful Performance.
Platinum center and ground electrode for greater wear resistance
Maintains stable operating temperature under all engine loads
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature
OE Replacement: Designed as an OE replacement, ensuring compatibility and reliable performance for your vehicle.

from

$13.99

HIGH IGNITABILITY PROJECTED SQUARE PLATINUM ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with a unique cut-back PSPE ground electrode
RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
PSPE DESIGN: Projected square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modern vehicles using OE PSPE type spark plugs or for those seeking an aftermarket plug with the latest OE technology

from

$4.79

Champion® Platinum Power¿ spark plugs deliver powerful performance. Made from exclusive Heat-Active¿ alloy, a fine-wire center electrode and V-trimmed ground electrode provides sharp spark focus.

Product Features:

Platinum Power- Premium Spark Plug. Powerful Performance.
Platinum center electrode for long life
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active┐ alloy allows electrodes to reach optimal temperature
Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug

from

$41.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$53.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$43.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$20.82

Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
Corrugated Ribs Prevent Flashover
Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
Copper Core Aids in Heat Removal
Triple Seals Prevent Leakage

from

$19.17

The DENSO Iridium Long Life spark plug was specifically designed for long service life and consistent performance in the latest, most advanced production cars DENSO’s patented iridium alloy is more durable than even platinum, allowing the center electrode to be shrunk to only 0.7mm in diameter. This produces a dramatic improvement in ignitability and spark plug life. Closely related to platinum and exhibiting even tougher qualities, the rare metal iridium is an ideal material for spark plugs. A fine-wire, 0.7mm iridium center electrode is 360-degree laser welded in place using an exclusive DENSO process, and then matched to a platinum ground electrode. This pair of precision-formed, premium-metal electrodes dramatically extends the plug’s useful life.

Product Features:

Fine-wire iridium center electrode
Platinum ground electrode
360 degree laser-welded spark tip
Sustained spark performance over 100,000 miles
Withstands higher pressures and temperatures

from

$16.53

Fine-wire iridium center electrode
Platinum ground electrode
360 degree laser-welded spark tip
Sustained spark performance over 100,000 miles
Withstands higher pressures and temperatures

from

$14.11

OE design for optimum fit and function
Center electrode is an ultra fine wire design.
Provides broader heat range to resist pre-ignition and fouling
Delivers exceptional ignitability and performance
Tapered shape ground electrode
Laser welded iridium-platinum alloy inlay
Nickel-plated shell with rolled threads
Anti-seize and corrosion protection

from

$12.13

The NGK Iridium IX offers extreme ignitability, improved throttle response and superior anti fouling properties. The Iridium alloy has extremely high melting point, ensuring high durability and a consistently stable spark that is perfect for today’s high-tech, high-performance engines. NGK’s IX Iridium Series Plugs were Designed Specifically for the Performance Enthusiast Designed specifically for the performance enthusiast.

Product Features:

Fine Wire Center Electrode Ensures High Durability and a Consistently Stable Spark
Iridium Alloy has an Extremely High Melting Point, Perfect for Today’s High-Tech, High Performance Engines
Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
Corrugated Ribs Prevent Flashover
Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
Copper Core Aids in Heat Removal
Triple Seals Prevent Leakage

from

$8.49

Champion® Iridium – the ultimate element. This spark plug’s fine-wire iridium center and platinum ground electrodes provide the sharpest spark focus for maximum performance.

Product Features:

Champion Iridium – Maximum Performance. Premium Spark Plug
Iridium center electrode delivers maximum life
Fine-wire center electrode and V-trimmed for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Maintains stable operating temperature under all engine loads
Heat-Active┐ alloy allows electrodes to reach optimal temperature quickly

from

$8.43

Superb quality and precision manufacturing process to ensure overall sealing dependability
Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
Manufactured to exact OEM specifications

from

$6.99

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.80 is a 12mm, 1.000 reach plug with a gasket seat. It fits a wide variety of late model applications, especially import. E3.80 has two legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.

In-Demand Ignition Coils and Boots for 2012 Hyundai Elantras

Select from 15 premium Ignition Coils and Boots parts for your 2012 Hyundai Elantra, with prices ranging from $45.99 to $279.99.

show more show less

from

$124.99

Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$124.99

First Time Fit
Built to DENSO Original Equipment Standards

from

$73.99

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$62.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$87.99

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$95.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$124.99

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$54.99

Encore Automotive Genuine OE Ignition Coil converts a 12-volt current to the high voltage energy needed to create an electric spark required to ignite the air-fuel mixture. Encore Automotive is dedicated to bringing the latest original equipment technologies to the Aftermarket to provide the highest overall value.

Product Features:

Genuine OE Part
Direct fit and OE performance to ensure reliable voltage at all speeds
High quality materials provide durability and protection against corrosion
Consistent and effective combustion

from

$121.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$45.99

Direct Original Equipment Replacement
Tested for Quality, Durability, and Reliability
Manufactured in Korea

from

$64.58

The Mando Automotive Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
Meets or exceeds the OE specifications for durability and performance
High profile insulation to prevent arching.
Radio-Frequency Interference (RFI) Suppression
Engineered to withstand extremes in temperatures

from

$279.99

Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$158.99

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$95.66

Prenco precision tailored coils are manufactured to OEM specifications with premium components to provide maximum voltage on demand while meeting/exceeding all RFI suppression requirements.

Product Features:

Multi-component 100% testing to guarantee OE fit and function.
OE Quality and direct fit application
Meets or exceeds the OE specifications for durability and performance
High profile insulation to prevent arching.
Radio-Frequency Interference (RFI) Suppression
Engineered to withstand extremes in temperatures

from

$88.99

Genuine OE Part
Direct fit and OE performance to ensure reliable voltage at all speeds
High quality materials provide durability and protection against corrosion
Consistent and effective combustion

Most Sold 2012 Hyundai Elantra Ignition Switches

Explore our best-selling Hyundai parts for the 2012 Elantra among 1 OEM and aftermarket options starting from $20.49.

show more show less

from

$20.49

Top-Rated Ignition and Tune-Up Products Brands For Your 2012 Hyundai Elantra

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 2012 Hyundai Elantras. Below you’ll find some of our best rated Ignition and Tune-Up Products from Autolite, NGK, and DENSO, and more. Ignition and Tune-Up Products from these brands that fit a 2012 Elantra start at just $3.49 and are rated as high as 5 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Autolite 2012 Hyundai Elantra Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2012 Hyundai Elantra, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. Autolite ticks all of those boxes. We offer a wide selection of Autolite Ignition and Tune-Up Products, specifically designed for the 2012 Hyundai Elantra. With over 9 Autolite brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.49, with an average price of just $7.61. Plus, with over 538 customer reviews and an average rating of 5 stars, you can trust that our Autolite Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$10.99

This product is not rated

Iridium Ultra Finewire Spark Plug: Optimal Performance, Durability, Ignitability

“”

from
$6.49

This product is not rated

Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life

“”

from
$10.99

This product is not rated

Iridium Ultra Finewire Spark Plug: Optimal Performance, Durability, Ignitability

“”

Popular NGK 2012 Hyundai Elantra Ignition and Tune-Up Products

NGK auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 2012 Hyundai Elantra owner should feel confident when installing genuine NGK parts in their vehicle. To ensure the best fit and performance for your 2012 Elantra, Advance Auto Parts carries a full inventory of 14 NGK Ignition and Tune-Up Products. Plus you will be keeping your Hyundai in peak condition while saving money because prices on these NGK Ignition and Tune-Up Products range from $5.79 to $124.99, plus, with more than 272 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from
$124.99

This product is not rated

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

“”

from
$13.99

This product is not rated

Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, FR5BHX

“”

from
$7.79

This product is not rated

G-Power Spark Plug: Single Platinum Tip Design, LKR7BGP-S

“”

FAQs for 2012 Hyundai Elantra Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 2012 Hyundai Elantras?

Out of 63 Ignition and Tune-Up Products that fit 2012 Hyundai Elantras, the following parts are the top sellers:

Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SXU22HCR11S (10477947) – $17.49
Iridium IX Spark Plug: Single Iridium Fine Wire, ZFR5FIX-11 (15650045) – $11.99
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (5394163) – $3.49

What’s the price range for 2012 Hyundai Elantra Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 2012 Hyundai Elantra start at $3.49 and go up to $279.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 2012 Hyundai Elantra?

The average price for Ignition and Tune-Up Products for the 2012 Hyundai Elantra is $37.16. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Hyundai Elantra model years?

Yes, we currently carry Ignition and Tune-Up Products for 32 model years of Hyundai Elantras between 1992 and 2024. Ignition and Tune-Up Products are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, and 2011.

What are the cheapest Ignition and Tune-Up Products for my 2012 Hyundai Elantra?

The cheapest 2012 Hyundai Elantra Ignition and Tune-Up Products we carry in stock are:

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (5394163) – $3.49
Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition (11010037) – $3.99
Copper Plus Spark Plug: Dependable Performance, OE Replacement, RC10YC4 (11390004) – $4.49
Champion Copper Plus- Boxed – RER8MC (10095338) – $4.49
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (12013889) – $4.79

What are the top-rated Ignition and Tune-Up Products that fit the 2012 Hyundai Elantra?

Out of 2,590 reviews by customers, our 2012 Hyundai Elantra Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 2012 Hyundai Elantra and their top-rated products:

Ignition Coils and Boots
- Ignition Coil (11451830) – $124.99
- Original Equipment Quality Direct Ignition Coil (11638163) – $124.99
- Spark Plug Wire Set: Carbon Core, 4 Wire Set (20500107) – $73.99
Spark Plugs
- Ignition Coil (11451830) – $124.99
- Original Equipment Quality Direct Ignition Coil (11638163) – $124.99
- Spark Plug Wire Set: Carbon Core, 4 Wire Set (20500107) – $73.99

What types of Ignition and Tune-Up Products do you sell for my 2012 Hyundai Elantra?

As of 2/5/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 2012 Hyundai Elantra:

Can I get help with 2012 Hyundai Elantra Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Hyundai Ignition and Tune-Up Products and more.

What is your return policy for Hyundai Elantra Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Hyundai Elantra Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Hyundai Elantra Ignition and Tune-Up Products

NGK – Spark Plug Wire Set (Part No.9634)

Accel – Pc Wire Set 96-11 Hkia 4-Cyl (Part No.184035)

NGK – Ignition Wire Set (Part No.F1020115848NGK)

NGK – Spark Plug Wire Set (Part No.7962)

Carquest Premium – Spark Plug Wire Set: 4 Wires, Increased performance, Designed for direct fit (Part No.35-4272)

NGK – Ignition Wire Set (Part No.F1020115946NGK)

DENSO – Spark Plug Wire Set: Carbon Core, 4 Wire Set (Part No.671-4239)

Carquest Premium – Knock Sensor (Part No.SBC3845)

Vemo – Knock Sensor (Part No.F6020256257VMO)

Carquest Premium – Knock Sensor (Part No.SBC3962)

Forecast – Forecast Knock Sensor (Part No.F6020256257FOR)

Victor Reinz – Spark Plug Tube Seal Set (Part No.18-10155-01)

Felpro – SPARK PLUG TUBE SEAL SET (Part No.ES 72974)

Ishino Stone – Spark Plug Tube Seal (Part No.A8027521376ISH)

MAHLE Original – Spark Plug Tube Seal Set (Part No.B31733)

Carquest Premium – Ignition Switch (Part No.CSC4193)

Carquest Premium – Ignition Switch (Part No.CSC2363)

Carquest Premium – Ignition Switch (Part No.CSA2114)

Original Equipment – Ignition Switch (Part No.M5050170064OEA)

MANDO – OE Direct Ignition Coil (Part No.21A0112)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1069)

Original Equipment – Ignition Coil (Part No.F3000122726OEA)

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-8305)

NGK – OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, BPR6EY-11 (Part No.6261)

DENSO – U-Groove Spark Plug: OE Performance, lasts 30K+ Miles, K16PR-L11 (Part No.3143)

DENSO – U-Groove Spark Plug: OE Performance, lasts 30K+ Miles, KJ16CR-L11 (Part No.3132)

Bosch – OE Finewire Double Iridium Spark Plug (Part No.F1000130909BOS)

NGK – OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PZFR5F-11 (Part No.4363)

Carquest Premium – Knock Sensor (Part No.SBC4312)

Accel – Pc Wire Set 96-11 Hkia 4-Cyl (Part No.184035)

DENSO – Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SXU22HCR11S (Part No.3461)

NGK – Iridium IX Spark Plug: Single Iridium Fine Wire, ZFR5FIX-11 (Part No.2477)

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IK16TT (Part No.4701)

NGK – OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SILZKR7B11 (Part No.9723)

NGK – Iridium IX Spark Plug: Single Iridium Fine Wire, LKR7DIX-11S (Part No.93175)

NGK – G-Power Spark Plug: Single Platinum Tip Design, ZFR5FGP (Part No.7098)

NGK – OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PZFR5F-11 (Part No.4363)

DENSO – U-Groove Spark Plug: OE Performance, lasts 30K+ Miles, KJ16CR-L11 (Part No.3132)

Autolite – Racing Resistor Spark Plug: Enables Performance, Handles Intense Conditions (Part No.AR3923)

NGK – Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, LKR7BHX (Part No.94705)

DENSO – Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SKJ16CR-L11 (Part No.3396)

NGK – OE Series Laser Iridium Spark Plug: Fine Wire Tip Design, IZFR5L11 (Part No.97932)

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IK16L (Part No.5357)

NGK – Laser Iridium Spark Plug (Part No.F100066430NGK)

Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP5702)

Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP3923)

Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP3923)

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.3923)

Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP3923)

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.56)

DENSO – Double Platinum Spark Plug: OE Performance, lasts 60K+ Miles, PKJ16CR-L11 (Part No.3246)

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IXUH22I (Part No.5356)

ACDelco – RAPIDFIRE Spark Plug (Part No.5)

ACDelco – Double Platinum Spark Plug (Part No.41-800)

DENSO – Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition (Part No.4503)

Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, RC10YC4 (Part No.346)

Champion – Champion Copper Plus- Boxed – RER8MC (Part No.445)

Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP5702)

Autolite Iridium – Iridium Ultra Finewire Spark Plug: Optimal Performance, Durability, Ignitability (Part No.AI5702)

Autolite Iridium – Iridium Ultra Finewire Spark Plug: Optimal Performance, Durability, Ignitability (Part No.AI3923)

NGK – G-Power Spark Plug: Single Platinum Tip Design, LKR7BGP-S (Part No.97390)

Champion – Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RC11PYPB4 (Part No.7070)

NGK – Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, FR5BHX (Part No.96457)

Champion – Platinum Power – Boxed – RC10PYC (Part No.3346)

MAHLE Original – Spark Plug Tube Seal Set (Part No.B31733)

Felpro – SPARK PLUG TUBE SEAL SET (Part No.ES 72974)

Victor Reinz – Spark Plug Tube Seal Set (Part No.18-10155-01)

NGK – Laser Iridium Spark Plug (Part No.F10001164602NGK)

DENSO – Iridium Long Life Spark Plug (Part No.F1000398006ND)

DENSO – Iridium Long Life Spark Plug (Part No.F1000336978ND)

Bosch – OE Finewire Double Iridium Spark Plug (Part No.F1000130909BOS)

NGK – Iridium IX Spark Plug (Part No.F1000115086NGK)

Champion – Iridium Spark Plug: Maximum Performance, OE Replacement, RC10WYPB4 (Part No.9001)

Ishino Stone – Spark Plug Tube Seal (Part No.A8027521376ISH)

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.80)

Delphi – Ignition Coil (Part No.GN10633)

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-8305)

DENSO – Spark Plug Wire Set: Carbon Core, 4 Wire Set (Part No.671-4239)

Carquest Premium – Spark Plug Wire Set: 4 Wires, Increased performance, Designed for direct fit (Part No.35-4272)