2012 GMC Yukon Exhaust System Kits

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

When an exhaust manifold fastener breaks on certain GMC, Chevrolet, or Hummer vehicles, repairing it conventionally usually requires significant labor, up to and including removing the cylinder head. This Dorman OE FIX repair clamp saves time by creating a seal without needing to extract the broken stud.

When an exhaust manifold fastener breaks on certain General Motors and Isuzu vehicles, repairing it conventionally usually requires significant labor, up to and including removing the cylinder head. This Dorman OE FIX repair clamp saves time by creating a seal without needing to extract the broken stud.

When an exhaust manifold fastener breaks on certain General Motors and Isuzu vehicles, repairing it conventionally usually requires significant labor, up to and including removing the cylinder head. This Dorman OE FIX repair clamp saves time by creating a seal without needing to extract the broken stud.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

This components in this exhaust manifold gasket and hardware kit are designed to match the fit and function of the original components to restore a secure connection between the cylinder head and the exhaust manifold on specified vehicles.

This is the Force II cat-back exhaust system for 2009-2014 Chevrolet Tahoe/GMC Yukon with the 5.3L engine. This exhaust system is perfect for the person looking for a moderate sound level outside the vehicle, with a mild sound increase inside the cab area. Features include all stainless steel construction, a Super 50 Series muffler, and dual 2.50-inch stainless steel mandrel-bent tailpipes. The system is configured to exit out the sides behind the rear tires, which is ideal for towing. It is then finished off with a pair of 3.00-inch polished 304 stainless steel tips and is covered by our Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for an easy installation you can do at home. Note: Fits both 2 & 4 Wheel Drive models.

For the person who is looking for an aluminized steel cat-back exhaust system with an aggressive exterior tone and moderate interior tone. The American Thunder system is heavy 16-gauge mandrel-bent aluminized steel tubing for durability and maximum performance. Includes a Super 50 Series performance muffler for that perfect blend of a deep aggressive exterior sound, with a moderate interior tone that won’t drive you out of the cab when having a conversation. The dual 2.50-inch tailpipes clear the factory spare tire and give you two choices of exit locations. Straight out the back for that true dual look, or exiting out each side behind the rear wheels, which is ideal for towing. The system is finished off with a pair of highly polished 304 stainless steel tips embossed with the Flowmaster name. Designed for an easy fit, these systems include all necessary parts, hardware and instructions for an easy installation you can do at home.

ARMOR PRO Series exhaust systems are crafted out of T304 Stainless Steel – the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. it is the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine cylinders, allowing it to produce more power and improve vehicle performance and longevity.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15734 brings out the personality of your SUV with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this SUV exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other SUV’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15734 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15734 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0779 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0779’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0779 includes (3) 3in. U-Bolt Clamps, (1) 3in. U-Bolt Clamp Hanger, (1) 2.75in. Ball Flare Clamp and interchanges with OE parts 20757680, 23219680, 23226906, 23310252, 23377840, 23385911, 84053741, 84327962, 84665238. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0779 features durable Aluminized Steel construction and is covered by a 2 year warranty.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15355 brings out the personality of your SUV with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this SUV exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other SUV’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15355 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15355 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that does not see much precipitation, or if you are looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine cylinders, allowing it to produce more power and improve vehicle performance and longevity.

BORLA(R) Cat-Back(TM) And Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere.

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0011 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0011’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0011 includes (4) 2.5in. U-Bolt Clamps, (1) 2.5in. U-Bolt Clamp Hanger, (2) Nuts, (2) Bolts and interchanges with OE parts 15066813, 15101422, 15101424, 15101425, 15101426, 15113052, 15113053, 15113054, 15113055, 15130192, 15130193, 15130194, 15130195, 15232527, 15232528, 15232529, 15232530, 15762251, 15762252, 15762255, 15772910. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0011 features durable Aluminized Steel construction and is covered by a 2 year warranty.