2012 GMC Sierra 2500 HD Remote Tire Pressure Sensors

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

Product Features:

• 315 MHz TPMS Universal with rubber valve
• Programmable – Only take 3 seconds to configure to specific application
• Always up-to-date with the new programming function via the TPMS diagnostic tool
• Covers multiple applications with one OE equivalent sensor
• Reprogrammable and Copy Clone Capable
• Have WAL technology for locating tire positon
• Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

GM Genuine Parts Tire Pressure Monitoring Sensors (TPMS) are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss). The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Battery is made to last up to 10 years of normal use
• Designed to communicate perfectly with your GM vehicle’s TPMS Module
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.

Product Features:

• Rubber clamp-in stem.
• Works with most major TPMS Scan tools
• Reduces SKUs
• OE Designed and Validated
• Advance anodization of valve stems and hex nuts
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.

Product Features:

• Metal clamp-in stem.
• Works with most major TPMS Scan tools
• Reduces SKUs
• OE Designed and Validated
• Advance anodization of valve stems and hex nuts
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Professional installation is strongly suggested

Product Features:

• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors