2012 Dodge Avenger Body Parts

Essential 2012 Dodge Avenger Body Parts

StrongArm – Trunk Lift Support: 14.2" Ext Length, 4.1" Travel, 76 Lbs of Force, 1 Pk (Part No.E6224)

Trunk Lift Support: 14.2" Ext Length, 4.1" Travel, 76 Lbs of Force, 1 Pk

from

$27.49
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
  • Non-Stick Back-Up Ring
  • Hardened Nitride Plated Steel Shaft
  • Engineered In USA To OE Quality Standards For Performance And Durability
  • IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
  • Easy To Install In Just Minutes. No Special Tools Required.
  • Exact Fit Original Equipment Design Guarantees Correct Fit And Function
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

Dorman – Window Regulator: Power, 1 Pack (Part No.752-313)

Window Regulator: Power, 1 Pack

from

$63.99
The original equipment window regulator binds from stress caused by a lack of sheathing and a poor cable reel housing design. This Dorman OE FIX replacement features sheathing and a redesigned cable reel housing to prevent cable binding.

Product Features:
  • Improved replacement – this window regulator features enhancements over the factory part for greater reliability
  • Failure-resistant design – features a redesigned cable reel housing to resist cable reel binding from medium-term elongation
  • Enhanced components – also includes cable sheathing to eliminate high tension and reduce cable stress
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

KAI – Hood Panel (Part No.CH1230260V)

Hood Panel

from

$699.99
New Economy Replacement Hood Panel, Made Of Aluminum

Product Features:
  • Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rear Bumper Valance, With Single Exhaust, Without Dual Tips (Part No.CH1195106C)

Rear Bumper Valance, With Single Exhaust, Without Dual Tips

from

$83.99
New CAPA Certified Standard Replacement Rear Bumper Valance, With Single Exhaust [Without Dual Tips]

Product Features:
  • With Single Exhaust [Without Dual Tips], Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Front Bumper Cover Reinforcement Bar, Made Of High Strength Steel (Part No.CH1006211C)

Front Bumper Cover Reinforcement Bar, Made Of High Strength Steel

from

$259.99
New NSF Certified Premium Replacement Front Bumper Cover Reinforcement Bar

Product Features:
  • Made Of High Strength Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Covercraft – Custom Hood Protector (Part No.45186-01)

Custom Hood Protector

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:
  • Protects vehicle’s hood from bugs or rock chips
  • Low profile, aerodynamic design
  • Installs in less than 5 minutes, no tools required
  • Custom fit exactly to your vehicle
  • Leather grain vinyl
See More

Dorman – Hood Latch Assembly (Part No.820-303)

Hood Latch Assembly

from

$109.99
Hood no longer opening or closing properly? This replacement hood latch assembly matches the fit and function of the original equipment hood latch and is made of corrosion-resistant materials for reliable service.

Product Features:
  • Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch
  • Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration
  • Easy installation – requires no special tools to replace
  • Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service
See More

Dorman – Help – Exterior Door Handle Rear Left (Part No.81371)

Exterior Door Handle Rear Left

from

$56.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Integrated Door Lock Actuator (Part No.931-072)

Integrated Door Lock Actuator

from

$101.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

KAI – Fender Liner (Part No.CH1248159C)

Fender Liner

from

$49.99
New CAPA Certified Standard Replacement Driver Side Fender Liner, This Is A 2 Piece Liner That Is Connected By Plastic Rivets

Product Features:
  • This Is A 2 Piece Liner That Is Connected By Plastic Rivets, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bumper Impact Absorber (Part No.CH1170136C)

Bumper Impact Absorber

from

$152.99
New CAPA Certified Premium Replacement Rear Bumper Impact Absorber

Product Features:
  • Made Of Expanded Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – New Standard Replacement Front Bumper Cover Grille, Models Without Fog Lights (Part No.CH1036111)

New Standard Replacement Front Bumper Cover Grille, Models Without Fog Lights

from

$26.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Front Bumper Cover Grille, Without Fog Lights Front Bumper Cover Grille, Without Fog Lights. It is Designed to Replace Your Existing Bumper Cover Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Without Fog Lights Front Bumper Cover Grille, Without Fog Lights, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Burco – Side View Replacement Mirror (Part No.5259)

Side View Replacement Mirror

from

$29.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Carquest Premium – Oil Pressure Switch Connector (Part No.PTA1243)

Oil Pressure Switch Connector

from

$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

KAI – Hood Panel (Part No.CH1230260PP)

Hood Panel

from

$744.99
New CAPA Certified Premium Replacement Hood Panel, Made Of Aluminum

Product Features:
  • Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Door Window Switch (Part No.WSC1006)

Door Window Switch

from

$107.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Mirror Assembly: Passenger Side, Power Adjustment, Heated, 1 Pk (Part No.CH1321268)

Mirror Assembly: Passenger Side, Power Adjustment, Heated, 1 Pk

from

$59.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Premium Replacement Passenger Side Power Door Mirror, With Heated Glass, Non Foldaway Style, Textured. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Non-Folding, With Heated Glass, Textured, Convex Glass
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Daytime Running Light Module Connector (Part No.PTA3103)

Daytime Running Light Module Connector

from

$71.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

COAST TO COAST – Chrome Plated, Abs Plastic, Levers Only, With Covers For 4 Doors (Part No.CCIDH68513S)

Chrome Plated, Abs Plastic, Levers Only, With Covers For 4 Doors

from

$69.99
Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
  • Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
  • Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
  • UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
  • COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
  • EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
See More

Dorman – GM Molding Retainer (Part No.963-034D)

GM Molding Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

KAI – New CAPA Certified Standard Replacement Upper Grille, Matte-Dark Gray With Black Molding (Part No.CH1200349C)

New CAPA Certified Standard Replacement Upper Grille, Matte-Dark Gray With Black Molding

from

$324.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Upper Grille, Matte-Dark Gray With Black Molding. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Matte-Dark Gray With Black Molding, Made Of ABS Thermoplastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Chrysler Bumper Retainer (Part No.963-229D)

Chrysler Bumper Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

COAST TO COAST – Direct Fit, Chrome Plated, 4 Piece (Part No.CCISM601)

Direct Fit, Chrome Plated, 4 Piece

from

$159.99
Coat to Coast International body side molding is a stylish accessory that compliments any vehicle. Durable ABS plastic is chrome plated for lasting shine. Side moldings install effortlessly with automotive grade 3M tape. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • Constructed From High-Quality, Durable, Automotive Grade ABS
  • Two Layers Of Clear Coat Enhance And UV Protect The Finish
  • Quickly And Affordably Upgrades The Trim Level Appearance Of A Vehicle
  • Installs In Minutes Without Tools Using Pre-Applied Automotive Grade 3M Tape
  • Easy Installation
  • Mount with 3M Tape
See More

AutoCraft – Door Handle, Interior (Part No.83700)

Door Handle, Interior

from

$25.99
Needa Parts, a division of the Hillman Group, offers more than 3,000 door handles with coverage from vintage to late model cars, trucks, and vans. Our handles are manufactured to ensure a proper fit and replacement, as well as durability to ensure extended use.

Product Features:
  • All parts are a direct OE cross and meet or exceed OEM standards
  • Includes spring and clips (where applicable)
  • All handles are individually packaged
See More

Dorman – Integrated Door Lock Actuator – Trunk/Decklid (Part No.931-270)

Integrated Door Lock Actuator - Trunk/Decklid

from

$78.99
This trunk lock actuator motor matches fit and function of the original equipment actuator motor to restore proper trunk latch functions. Designed as a direct replacement, this part plugs into the factory wiring..

Product Features:
  • Ideal replacement – this trunk lock actuator motor matches the fit and function of the original actuator motor to restore trunk latch functions.
  • Simple installation – this actuator motor features factory-style connectors and plugs into the original wiring harness
  • Cost-effective solution – offers original equipment function at a competitive price
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
See More

Dorman – Power Window Switch – Front Right W/Auto (Part No.901-491)

Power Window Switch - Front Right W/Auto

from

$26.99
This door window switch is designed to match the fit, function and performance of the factory switch on specified vehicles. It is engineered to help restore window switch functionality to original equipment standards when the factory part is missing, broken, or has failed from internal electrical or mechanical component damage.

Product Features:
  • Direct replacement – this door window switch is designed to match the fit, function and performance of the factory switch on specified vehicles
  • Ideal solution – engineered to help restore window switch functionality to original equipment standards when the factory part is missing, broken, or has failed from internal component damage
  • Restores appearance – manufactured to precise specifications for a seamless installation and fit that complements the vehicle interior
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Door Mirror Switch (Part No.RMC1008)

Door Mirror Switch

from

$43.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Door Mirror Switch (Part No.RMC1162)

Door Mirror Switch

from

$33.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

2012 Dodge Avenger Body Parts

You count on your 2012 Dodge Avenger to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 77 Body Parts ranging in price from $2.46 to $744.99, you’re sure to find everything you need for your 2012 Dodge Avenger.

Brands matter. If you want to shop a specific Body Parts brand, we stock 11 different brands like Dorman, Carquest, and KAI. 2012 Dodge Avenger Body Parts start as low as $2.46!

One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 120 extensive product reviews on 2012 Dodge Avenger Body Parts.

Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 2012 Dodge Avenger below to get started!

Top-Rated Body Parts Brands For Your 2012 Dodge Avenger

Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2012 Dodge Avenger running right for years to come. In our inventory you’ll find brands like Dorman, Carquest, KAI, and even more.

Popular Dorman Body Parts

You’ll find popular Dorman brand products across Power Window Parts. All are waiting to get your 2012 Dodge Avenger back on the road. Some of the top-rated Dorman products in these categories are:
Power Window Switch - Master Left Side
from $105.99
(8)
Power Window Switch – Master Left Side
Power Window Switches
Power Window Switch - Front Left
from $99.99
(7)
Power Window Switch – Front Left
Power Window Switches

FAQs for 2012 Dodge Avenger Body Parts

What are the most purchased Body Parts for the 2012 Dodge Avenger?

Out of 77 Body Parts for the 2012 Dodge Avenger, the most popular in our inventory are:
Chrysler Bumper Retainer
from $4.49
This product is not rated
Chrysler Bumper Retainer
Rocker Panel Molding Retainers
GM 1/4" Screw Rivets
from $4.49
This product is not rated
GM 1/4" Screw Rivets
Rocker Panel Molding Retainers
Door Window Switch
from $67.99
This product is not rated
Door Window Switch
Power Window Switches