2012 Chevrolet Silverado 2500 HD Differentials

Essential 2012 Chevrolet Silverado 2500 HD Differentials

Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)

Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5"

from

$304.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.

Product Features:
  • Clutch kit
  • Fits GM 10.5″ 14 bolt truck with Eaton positraction
  • Carbon fiber clutches
See More

USA Standard Gear – Standard Spider Gear Set For 33 Spline GM 9.5" And Pre ’06 GM 9.25IFS (Part No.39029)

Standard Spider Gear Set For 33 Spline GM 9.5" And Pre '06 GM 9.25IFS

from

$214.99
Product Features:
  • Spider gear kit
  • Fits GM 9.5″ open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Dorman – Rear Differential Cover (Part No.697-703)

Rear Differential Cover

from

$36.99
This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:
  • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
  • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
  • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)

Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60

from

$232.99
Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
See More

Dorman – 4WD Locking Hub Actuator (Part No.K7027699827DOR)

4WD Locking Hub Actuator

from

$231.58
More like a complete kit than a single part, Dorman’s Four-Wheel Drive (4WD) Actuator comes with all the parts needed to complete the repair. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

Product Features:
  • Includes all necessary gaskets and seals (where applicable)
  • Sealed for leak resistance
  • Engineered for durability against harsh road and weather conditions, including water intrusion
  • Quality tested to ensure trouble free installation and performance
See More

USA Standard Gear – Bearing Kit For ’10 & Down GM 9.25" IFS Front (Part No.58023)

Bearing Kit For '10 & Down GM 9.25" IFS Front

from

$319.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits 2010 and down GM 9.25″ IFS
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Yukon Gear – GM 9.25" IFS Side Adjuster, ’11 & Up (Part No.33358)

GM 9.25" IFS Side Adjuster, '11 & Up

from

$115.99
9.25IFS GM 11 & up side bearing adjuster.

Product Features:
  • Side adjuster
  • Fits 2011 and up GM 9.25″ IFS
See More

Yukon Gear – Standard Open Carrier Case, GM 10.5" 14 Bolt Truck, 4.10 & Down (Part No.20100)

Standard Open Carrier Case, GM 10.5" 14 Bolt Truck, 4.10 & Down

from

$729.99
Product Features:
  • Standard open carrier case
  • Fits GM 10.5″ 14 bolt truck
  • 4.10 and down ratio only
  • Does not include spider gears
See More

Yukon Gear – Pinion Install Kit For GM 9.25" Differential (Part No.13074)

Pinion Install Kit For GM 9.25" Differential

from

$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 9.25″ IFS
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

National – Shaft Repair Sleeve (Part No.99193)

Shaft Repair Sleeve

from

$43.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

USA Standard Gear – Master Overhaul Kit for the ’10 & Down GM 9.25" IFS Front Differential (Part No.37061)

Master Overhaul Kit for the '10 & Down GM 9.25" IFS Front Differential

from

$594.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 2010 and down GM 9.25″ IFS
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
See More

Yukon Gear – Standard Open And Gov-Loc Cross Pin For 9.5" GM (Part No.33402)

Standard Open And Gov-Loc Cross Pin For 9.5" GM

from

$32.99
Standard open and Gov-Loc cross pin for 9.5″ GM.

Product Features:
  • Cross pin shaft
  • Fits GM 9.5″
See More

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Left Hand Adjuster Lock Nut For 9.25" GM (Part No.33354)

Left Hand Adjuster Lock Nut For 9.25" GM

from

$26.99
Left hand adjuster lock nut for 9.25″ GM.

Product Features:
  • Side adjuster lock nut
  • Fits GM 9.25″
See More

Yukon Gear – 11.5" Chrysler & GM Helical Gear Type Positraction (Part No.32244)

11.5" Chrysler & GM Helical Gear Type Positraction

from

$1806.99
11.5″ Chrysler Helical gear Type positraction.

Product Features:
  • Fits GM and Chrysler 11.5″
  • 30 spline
See More

SKF – Wheel Bearing (Part No.K8000205983SKF)

Wheel Bearing

from

$60.23
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:
  • Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
  • 100% tested to the actual OE specifications per part number for fit, form and function
  • High quality steel and surface finishes
  • Proper implementation of heat treatment
See More

Yukon Gear – DiffrlPinSupportBolt (Part No.33582)

DiffrlPinSupportBolt

from

$5.99
DiffrlPinSupportBolt

Motive Gear – Differential Ring and Pinion (Part No.GM11.5-488)

Differential Ring and Pinion

from

$386.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Motive Gear – Differential Gear Install Kit (Part No.GM9.5IKL)

Differential Gear Install Kit

from

$79.99


Product Features:
  • MINI INSTALL KIT-GM9.5/CHRY9.25 FRT
See More

Motive Gear – Ring Gear Bolt (Part No.331421)

Ring Gear Bolt

from

$9.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application.
See More

Yukon Gear – Yoke For GM 10.5" 14 Bolt Truck, 1410, Strap Style (Part No.41180)

Yoke For GM 10.5" 14 Bolt Truck, 1410, Strap Style

from

$299.99
Yukon yoke for GM 10.5″ 14 bolt truck, 1410, strap style. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • 30 spline
  • 1410 u-joint size
  • 4.188″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Felpro – Differential Cover G (Part No.J7018977707FEL)

Differential Cover G

from

$9.86
Differential Cover G

Pro-King – Differential Pinion Seal (Part No.743B070A)

Differential Pinion Seal

from

$23.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1102)

Differential Pinion Shim Kit

from

$9.49


Product Features:
  • KIT SHIM PINION
See More

Yukon Gear – GM Side Gear Spacer Sleeve For GM 9.25" IFS (Part No.33533)

GM Side Gear Spacer Sleeve For GM 9.25" IFS

from

$40.99
Product Features:
  • Side gear spacer sleeve
  • Fits GM 9.25″ IFS
See More

Motive Gear – Differential Crush Sleeve (Part No.14012691)

Differential Crush Sleeve

from

$2.99


Product Features:
  • CRUSH SLEEVE 9.5 GM 14BLT MIN ORDER 1000
See More

Yukon Gear – Dura Grip For GM & Chrysler 11.5", 30 Spline (Part No.26033)

Dura Grip For GM & Chrysler 11.5", 30 Spline

from

$1485.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM and Chrysler 11.5″ with 30 spline axles
  • Clutch style positraction
  • Smooth design
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Steel Spool For GM 14 Bolt Truck With 30 Spline Axles, 4.10 & Down (Part No.32048)

Steel Spool For GM 14 Bolt Truck With 30 Spline Axles, 4.10 & Down

from

$539.99
Yukon Performance steel spool for GM 14T with 30 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck with 30 spline axles
  • 4.10 and down ratio only or 4.56 and up thick gears
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

2012 Chevrolet Silverado 2500 HD Differentials

Maybe you’re in the middle of a full rebuild of that 2012 Chevrolet Silverado 2500 HD. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 199 different Differentials in our inventory ranging from $2.99 to $3,169.99. That means you can find the exact parts or products you need to keep that 2012 Chevrolet Silverado 2500 HD running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 2012 Chevrolet Silverado 2500 HD. Valvoline, Royal Purple, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2012 Chevrolet Silverado 2500 HD, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 4,104 reviews in this category, some of the top rated parts include Multi Purpose Seal with 4.5 stars and Bearings with 3.9 stars.

So if you’re in the market for aftermarket Differentials to keep your 2012 Chevrolet Silverado 2500 HD rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2012 Chevrolet Silverado 2500 HD Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2012 Chevrolet Silverado 2500 HD demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Silverado 2500 HD the best it can be. Be sure to browse some of our top Differentials brands and parts.

Top 2012 Chevrolet Silverado 2500 HD Differentials from Dorman

Dorman products are another trusted brand when it comes to Differentials for your 2012 Chevrolet Silverado 2500 HD. Popular Dorman parts include:
Ring and Pinion Bearing Installation Kit
from $282.99
(255)
Ring and Pinion Bearing Installation Kit
Differential Bearing Kits

FAQs for 2012 Chevrolet Silverado 2500 HD Differentials

What are the most purchased Differentials for the 2012 Chevrolet Silverado 2500 HD?

Out of 199 Differentials for the 2012 Chevrolet Silverado 2500 HD, the most popular in our inventory are:
Differential Cover Gasket
from $6.79
(13)
Differential Cover Gasket
Rear Differential Cover Gaskets
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil

What are the top-rated 2012 Chevrolet Silverado 2500 HD Differentials?

Top-rated Differentials for your 2012 Chevrolet Silverado 2500 HD based on customer reviews/ratings are:
Multi Purpose Seal
from $34.99
(8)
Multi Purpose Seal
“Nicely made. Heavy duty-just like factory parts.”
Bearings
from $23.99
(7)
Bearings
“Good price”
Multi Purpose Seal
from $44.99
(5)
Multi Purpose Seal
“How do you fix a leaking rear end? You seal it. That’s why I bought this seal.”