2012 Chevrolet Equinox Fuel and Emissions Systems
Find Your Specific 2012 Chevrolet Equinox Fuel and Emissions Systems
Below you will find various in-demand Chevrolet Fuel and Emissions Systems, components and accessories for your 2012 Equinox. Advance Auto Parts has popular Equinox parts like Air Flow Sensors, Fuel Injectors, Gas Caps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Equinox model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2012 Chevrolet Equinox Fuel and Emissions Systems below and start saving instantly.
Popular 2012 Chevrolet Equinox Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 2012 Chevrolet Equinoxes
ACDelco – Flex Fuel Sensor (Part No.13577394)
from
$271.99
ACDelco GM Original Equipment Flex Fuel Sensors monitor the ethanol content of the fuel in your flex fuel vehicle, and are GM-recommended replacements for your vehicle’s original components. The flex fuel sensor signal is used by the engine control module to adjust the air/fuel mixture and ignition timing for efficient operation. These original equipment flex fuel sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Supplies accurate readings to the ECM to make proper adjustments for gas mixture
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
GM Genuine Parts – Fuel Tank Lock Ring (Right) (Part No.TR26)
from
$12.99
GM Genuine Parts Fuel Tank Sender Retainers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These retainers help align and secure your vehicle’s fuel tank sender. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Help align and secure fuel tank sender
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – RELAY,PARK LP (Part No.D1777C)
from
$11.49
GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps connect or disconnect power to vehicle accessories
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
INA – Fuel Pump Tappet (Part No.E3013418177INA)
from
$41.35
Fuel Pump Tappet
Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)
from
$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Motorad – Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (Part No.MGC817T)
from
$23.99
Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.
See More
ACDelco – GM Original Equipment Secondary Air Injection Check Valve (Part No.B6050430159ACD)
from
$364.60
The ACDelco GM Original Equipment Secondary Air Injection Check Valve is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest – Fuel Tank Lock Ring (Part No.579-054)
from
$15.99
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
- Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ACDelco – GM Original Equipment Secondary Air Injection Pump (Part No.B6010565000ACD)
from
$398.36
An ACDelco GM Original Equipment Secondary Air Injection Pump is an emission control component and is a GM-recommended replacement for your vehicle’s original component. The secondary air system injects air into your vehicle’s downstream exhaust system to assist in reducing emissions. This original equipment secondary air injection pump has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Installation Note: When replacing the Air Pump it is also recommended that you check and /or replace the Air Pump Relay and/or filter
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – Fuel Tank Sending Unit O-Ring (Part No.G48)
from
$16.99
GM Genuine Parts Fuel Tank Sending Unit O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These O-rings help seal out contaminants, and help protect your vehicle’s fuel tank sending unit. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Help seal out contaminants
- Help protect fuel tank sending unit
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Bosch – Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (Part No.15741)
from
$61.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
GM Genuine Parts – Secondary Air Injection Check Valve Kit with Retainers and Bolts (Part No.214-2150)
from
$281.99
GM Genuine Parts Secondary Air Injection Check Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These valves help prevent exhaust gases from flowing back through the air injection system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps prevent exhaust from entering air pump
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Secondary Air Injection Pump Hose (Part No.25817029)
from
$52.99
GM Genuine Parts Secondary Air Injection Pump Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Delphi – Fuel Tank Sending Unit (Part No.FL0372)
from
$180.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel senders are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
GM Genuine Parts – Vapor Canister (Part No.19330402)
from
$159.99
GM Genuine Parts Vapor Canisters are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These canisters capture and store evaporating fuel vapors from the fuel tank to be drawn into the intake manifold during engine operation. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps reduce harmful pollutants from entering the atmosphere
- Captures fuel vapors to be re-burned in the engine
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
ACDelco – GM Original Equipment Fuel Sender Seal (Part No.E2050295147ACD)
from
$27.57
The ACDelco GM Original Equipment Fuel Sender Seal is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – Mass Airflow Sensor Gasket (Part No.15813321)
from
$11.99
GM Genuine Parts Mass Air Flow Sensor Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Delphi – Fuel Pump Module Assembly: Without Float Arm (Part No.FG1294)
from
$522.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
ACDelco – GM Original Equipment Vapor Canister Purge Valve (Part No.B7080352028ACD)
from
$67.51
The ACDelco GM Original Equipment Vapor Canister Purge Valve is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)
from
$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
DENSO – Oxygen Sensor (Part No.C5010690346ND)
from
$75.19
Oxygen Sensor
Dorman – SPLASH SHLD COWL RET (Part No.963-230D)
from
$4.99
SPLASH SHLD COWL RET
ACDelco – Black Multi-Purpose Pigtail (Part No.PT2183)
from
$94.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)
from
$6.29
GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
ACDelco – GM Original Equipment Manifold Absolute Pressure Sensor (Part No.C7044559872ACD)
from
$62.40
The ACDelco GM Original Equipment Multi-Purpose Pressure Sensor converts mechanical force into an electrical signal, and is a GM-recommended replacement for your vehicle’s original component. It monitors the pressure of various system fluids in your vehicle. This original equipment multi-purpose pressure sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Undergo the same stringent testing process as the original part
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Oxygen Sensor Connector (Part No.PTA1687)
from
$47.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
ACDelco – 4-Way Male Gray Multi-Purpose Pigtail (Part No.PT1366)
from
$72.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Upgrade your 2012 Chevrolet Equinox with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2012 Chevrolet Equinox, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Equinox functioning at its best. At Advance Auto Parts, we offer a wide selection of 139 Fuel and Emissions Systems for the 2012 Chevrolet Equinox, designed to meet your needs without breaking the bank.
From
Air Flow Sensor
replacements to
Fuel Injectors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2012 Chevrolet Equinox at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $4.49 to $997.09, with
an average price of $121.10.
Our 139 Fuel and Emissions Systems in stock come from 15 trusted brands, so you’re sure to find the right part for your 2012 Chevrolet Equinox without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Chevrolet Equinox, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like Bosch, FELPRO, Carquest Premium, and more.
Bosch Fuel and Emissions Systems
start at just $39.99 and boast an impressive 5 stars average rating from customers.
FELPRO and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $7.49, and at an average 5 stars rating.
With 2,962 customer reviews and counting, our 2012 Chevrolet Equinox Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2012 Chevrolet Equinox is always ready to roll. We’re committed to providing you with everything you need to keep your Equinox in top shape, all in one place.
Start shopping confidently below for your 2012 Chevrolet Equinox!
Best-Selling Air Flow Sensors for 2012 Chevrolet Equinoxes
Enhance the driving experience in your Chevrolet with 12 quality Air Flow Sensor components, starting at $4.49.
NTK – Manifold Absolute Pressure Sensor (Part No.MA0205)
from
$49.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
- The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
Dorman – GM Drive Type Rivet (Part No.963-208D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1028)
from
$36.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
ACDelco – GM Original Equipment Oxygen Sensor (Part No.C5010352620ACD)
from
$88.34
The ACDelco GM Original Equipment Oxygen (O2) Sensor is a GM-recommended replacement for your vehicle’s original component. The Oxygen (O2) Sensor is a special feedback sensor on your vehicle’s exhaust system. This sensor measures the proportion of oxygen in the exhaust gases. Using this measurement, the engine management computer can adjust the air/fuel ratio near the optimum value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. This original equipment oxygen sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. When you are looking for a match to GM Original Equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done.
Product Features:
See More
Product Features:
- Detect oxygen content in the exhaust gases to optimize emissions and fuel economy
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – Ambient Air Temperature Sensor (Part No.15-51150)
from
$18.99
ACDelco GM Original Equipment Ambient Air Temperature Sensors are used with automatic climate control systems. The sensors provide the HVAC system controller with outside air temperature, allowing the controller to modify the climate-control strategy. The sensors may also provide the signal for the outside temperature in the driver information display. This original equipment ambient air temperature sensor is a GM-recommended replacement for your vehicle’s original components and has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Repairs the outside temperature display function caused by failed ambient temp sensor
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – Mass Airflow Sensor Gasket (Part No.15813321)
from
$11.99
GM Genuine Parts Mass Air Flow Sensor Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Bosch – Manifold Absolute Pressure Sensor (Part No.0261230289)
from
$39.99
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range
Product Features:
See More
Product Features:
- Bosch OE quality pressure sensors for accurate measurements
- Bosch OE quality pressure sensors for long term stability
- Bosch OE quality pressure sensors with a short response time
- Bosch OE quality pressure sensors with improved media resistance
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1069)
from
$12.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
DENSO – Oxygen Sensor (Part No.C5010690280ND)
from
$105.43
Oxygen Sensor
DENSO – Oxygen Sensor (Part No.C5010690346ND)
from
$75.19
Oxygen Sensor
Bosch – Oxygen Sensor (Part No.C5010956268BOS)
from
$66.50
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
ACDelco – GM Original Equipment Manifold Absolute Pressure Sensor (Part No.C7044559872ACD)
from
$62.40
The ACDelco GM Original Equipment Multi-Purpose Pressure Sensor converts mechanical force into an electrical signal, and is a GM-recommended replacement for your vehicle’s original component. It monitors the pressure of various system fluids in your vehicle. This original equipment multi-purpose pressure sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Undergo the same stringent testing process as the original part
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Most Popular 2012 Chevrolet Equinox Fuel Injectors
Customize your Chevrolet with 30 Fuel Injectors products
like Air Flow Meters and Mass Air,
Fuel Injector Gaskets, and
Fuel Injectors, all
priced under $288.95.
Felpro – THROTTLE BODY GASKET SET (Part No.61690)
from
$8.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Each gasket set is built to meet or exceed all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0120)
from
$75.99
Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.
Product Features:
See More
Product Features:
- Hitachi is a Tier 1 OE supplier for air flow sensors
- 100% NEW, never remanufactured
- Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
- Precision manufactured and assembled sensing elements for accurate air flow measurements
Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.MS 97241)
from
$26.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6396)
from
$89.99
CARQUEST MAF sensors are 100% new and are produced by a certified OEM supplier that designs and manufactures new mass air flow sensors
Product Features:
See More
Product Features:
- CARQUEST MAF use all new high-quality components at the highest quality standards.
- Manufactured with new and advanced technology to perform, fit and function at OE specifications.
- All new product that is tested with OEM equipment to OEM standards
- Outperforms competition when tested in extreme environmental conditions
ACDelco – Direct Fuel Injector Assembly (Part No.12634126)
from
$136.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
- Allows for a quick throttle response
- Assists in cold engine starts
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61699)
from
$9.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Each gasket set is built to meet or exceed all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)
from
$6.29
GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
ACDelco – Black Multi-Purpose Pigtail (Part No.PT2183)
from
$94.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Hitachi – Fuel Injector (Part No.C1000510111HIT)
from
$132.08
Fuel Injector
ACDelco – Direct Fuel Injector Assembly (Part No.217-3444)
from
$127.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
- Allows for a quick throttle response
- Assists in cold engine starts
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Remanufactured GDI Fuel Injector (Part No.A511-1063)
from
$85.99
CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications.
- Includes new o-rings and seals made of premium OE quality materials.
- Includes application specific technical bulletin, where applicable.
ACDelco – Direct Fuel Injector Assembly (Part No.217-3427)
from
$135.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
- Allows for a quick throttle response
- Assists in cold engine starts
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – Fuel Injector (Part No.C1000510194ACD)
from
$229.18
Fuel Injector
ACDelco – GM Original Equipment Mass Air Flow Sensor (Part No.B3130437932ACD)
from
$288.95
The ACDelco GM Original Equipment Mass Air Flow (MAF) Sensor is a key part of the engine management system, and is a GM-recommended replacement for your vehicle’s original component. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. This original equipment mass air flow sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Measure the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject
- Undergo the same stringent testing process as the original part
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – Fuel Injector (Part No.C1000510146ACD)
from
$233.43
Fuel Injector
ACDelco – Fuel Feed Pipe (Part No.12681113)
from
$201.99
ACDelco GM Original Equipment Fuel Feed Line is a GM-recommended replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This original equipment line will provide the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – GM Original Equipment Air Mass Sensor (Part No.B3150756035ACD)
from
$171.33
An ACDelco GM Original Equipment Air Mass Sensor is a key part of the engine management system, and is a GM-recommended replacement for your vehicle’s original component. The Air Mass Sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. This original equipment mass air flow sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Measure the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject
- Undergo the same stringent testing process as the original part
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – GM Original Equipment Fuel Injector O-Ring Kit (Part No.C1013431798ACD)
from
$168.18
The ACDelco GM Original Equipment Fuel Injector O-Ring Kit is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Hitachi – Fuel Injector (Part No.C1000510194HIT)
from
$136.01
Fuel Injector
GM Genuine Parts – Fuel Injector O-Ring Kit with Seals and Spacers (Part No.217-3399)
from
$125.99
GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a seal to prevent fuel leaks
- Helps seal combustion chamber from the elements
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – GDI SEAL TOOL KIT (Part No.ATK-001)
from
$119.99
GDI SEAL TOOL KIT
Dorman – FUEL FEED PIPE (Part No.904-050)
from
$93.99
This fuel injection fuel feed pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this fuel injection fuel feed pipe is designed to match the fit and function of the original pipe on specified applications.
- Restores functionality – reliable replacement for an original part that has failed due to heat or vibration
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Remanufactured GDI Fuel Injector (Part No.A511-1093)
from
$83.99
CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications.
- Includes new o-rings and seals made of premium OE quality materials.
- Includes application specific technical bulletin, where applicable.
Carquest Premium – Remanufactured Fuel Injector (Part No.A511-1033)
from
$81.99
Product Features:
See More
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Felpro – FUEL INJECTOR O-RING SET (Part No.ES 73135)
from
$30.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Fuel Injector Seal Kit (Part No.AS068)
from
$20.99
CARQUEST fuel injector seal kits include the necessary o-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials.
- Services one injector.
ACDelco – FI Throttle Body Mou (Part No.C7001534596ACD)
from
$14.33
FI Throttle Body Mou
Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)
from
$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10012-01)
from
$5.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Top Picks for 2012 Chevrolet Equinox Gas Caps
Upgrade Chevrolet Equinoxes with top-quality Gas Caps parts, including 4 OEM and aftermarket selections for your 2012 model.
Carquest Premium – Fuel Cap: 10825, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10825)
from
$14.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Cap: 10595, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10595)
from
$21.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Motorad – Tethered Fuel Cap (Part No.MGC825T)
from
$21.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Come pre-assembled for quick and easy installation.
- Several fastener options to work with any fuel cap compartment configuration
- Fits vehicles orginally equipped with tether
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17595)
from
$11.49
None
Product Features:
See More
Product Features:
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
- Independently tested for emission control
- Passes all state and federal emissions tests
- Reduces air pollution with proper sealing and venting
In-Demand Fuel Pumps for 2012 Chevrolet Equinoxes
Select from 23 premium Fuel Pumps parts for your 2012 Chevrolet Equinox, with prices ranging from $15.99 to $997.09.
GM Genuine Parts – High Pressure Fuel Pump with Seal, Retainer, Gasket, and Bolt (Part No.EP1028)
from
$411.99
GM Genuine Parts Mechanical Fuel Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These help provide a steady, reliable supply of fuel for your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a steady, reliable supply of fuel for your vehicle’s engine
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Fuel Pump (Part No.HPM1029)
from
$253.99
GM Genuine Parts Mechanical Fuel Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These help provide a steady, reliable supply of fuel for your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a steady, reliable supply of fuel for your vehicle’s engine
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
INA – Fuel Pump Tappet (Part No.E3013418177INA)
from
$41.35
Fuel Pump Tappet
Delphi – Direct Injection High Pressure Fuel Pump: With Gasket (Part No.HM10008)
from
$382.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
- Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
- Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
- Meets OE specifications
GM Genuine Parts – Fuel Pump Module Assembly without Fuel Level Sensor, with Seals (Part No.M100013)
from
$305.99
GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a reliable fuel supply to your vehicle’s engine
- Electrical connections are designed to help eliminate high resistance due to vehicle vibration
- Designed to optimize pump life and reduce fuel pump noise
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
ACDelco – Fuel Pump Control Mo (Part No.E3006582167ACD)
from
$306.76
Fuel Pump Control Mo
Delphi – Direct Injection High Pressure Fuel Pump: With Gasket (Part No.HM10007)
from
$446.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
- Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
- Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
- Meets OE specifications
ACDelco – GM Original Equipment Mechanical Fuel Pump (Part No.E3003422379ACD)
from
$539.35
An ACDelco GM Original Equipment Mechanical Fuel Pump is a GM-recommended replacement for your vehicle’s original components, and is a diaphragm positive displacement pump. A rocker arm driven off the fuel pump camshaft lobe moves the diaphragm, causing fuel to be drawn in through a one-way inlet reed valve. As the cam lobe rotates away from the rocker arm, a spring pushes the diaphragm back, pushing the fuel out through a one-way outlet reed valve to the carburetor. This original equipment fuel pump has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Able to fulfill original equipment specifications on earlier-model carbureted engines
- Meet the original model year specific requirements for both Environmental Protection Agency (EPA) and California Air Resources Board of Emissions (CARB) certifications
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Delphi – Fuel Transfer Unit (Part No.FT4043)
from
$205.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Meet or exceeds OE requirements
- Transfers fuel within the tank
- Does not include primary fuel pump
Spectra Premium – FUEL PUMP ASSEMBLY (Part No.SP6633M)
from
$997.09
CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.
Product Features:
See More
Product Features:
- Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
- Triple barb hose fitting provides superior, long-lasting seal
- Superior return porting for optimum fuel flow
- Enhanced pump to flange harness design provides worry-free electrical performance
- Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
- Gradient density, dual zone filtration designed for better contamination resistance
Delphi – Fuel Pump Module Assembly: With Float Arm, Seals (Part No.FG1910)
from
$809.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Delphi – Fuel Pump Module Assembly (Part No.FG1625)
from
$719.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M2545251)
from
$579.99
Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
GM Genuine Parts – Fuel Pump Module Assembly without Fuel Level Sensor, with Pressure Sensor, Seals (Part No.M100036)
from
$531.99
GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a reliable fuel supply to your vehicle’s engine
- Electrical connections are designed to help eliminate high resistance due to vehicle vibration
- Designed to optimize pump life and reduce fuel pump noise
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Fuel Pump Module Assembly without Fuel Level Sensor, with Pressure Sensor and Seals (Part No.M100037)
from
$501.99
GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a reliable fuel supply to your vehicle’s engine
- Electrical connections are designed to help eliminate high resistance due to vehicle vibration
- Designed to optimize pump life and reduce fuel pump noise
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Fuel Sending Unit HS1542616: Includes Sending Unit (Part No.HS1542616)
from
$481.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- All sending units are 100% performance tested
- Includes installation gaskets or seals where applicable
GM Genuine Parts – Fuel Pump Module Assembly without Fuel Level Sensor, with Pressure Sensor and Seals (Part No.M100083)
from
$456.99
GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a reliable fuel supply to your vehicle’s engine
- Electrical connections are designed to help eliminate high resistance due to vehicle vibration
- Designed to optimize pump life and reduce fuel pump noise
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Spectra Premium – High Press Fuel Pump (Part No.FI1502)
from
$378.99
High Press Fuel Pump
GM Genuine Parts – Fuel Pump Module Assembly without Fuel Level Sensor, with Seals and Cover (Part No.M100014)
from
$374.99
GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a reliable fuel supply to your vehicle’s engine
- Electrical connections are designed to help eliminate high resistance due to vehicle vibration
- Designed to optimize pump life and reduce fuel pump noise
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Fuel Pump (Part No.HPM1043)
from
$223.99
GM Genuine Parts Direct Injection High Pressure Fuel Pump are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a steady, reliable supply of fuel for your vehicle’s engine
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)
from
$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
ACDelco – Fuel Pump O-Ring (Part No.E3040421238ACD)
from
$24.06
Fuel Pump O-Ring
Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)
from
$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Most Sold 2012 Chevrolet Equinox Oxygen Sensors
Explore our best-selling Chevrolet parts for the 2012 Equinox among 19 OEM and aftermarket options starting from $34.99.
DENSO – Oxygen Sensor: Upstream, 4 Wire, 9.92" Long, Heated, Exact Fit (Part No.234-4242)
from
$69.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Walker – Walker Oxygen Sensor (Part No.C5010380306WKR)
from
$65.44
Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.
Product Features:
See More
Product Features:
- Improved Engine Response and Performance
- Lower Emissions
- Improved Fuel Economy
- Longer Sensor Life
- Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install
Bosch – Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (Part No.15733)
from
$80.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15730)
from
$77.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
Bosch – Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (Part No.15741)
from
$61.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
GM Genuine Parts – Heated Oxygen Sensor (Part No.12634061)
from
$69.99
GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Detects oxygen content in the exhaust gases to help optimize emissions
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Oxygen Sensor: 4 Wires, 256 mm Long, Heated, Exact Fit (Part No.213-4768)
from
$85.99
GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Detects oxygen content in the exhaust gases to help optimize emissions
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Bosch – Oxygen Sensor: 4 Wire, 12.2" Long, Heated, Exact Fit (Part No.16454)
from
$61.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
GM Genuine Parts – Oxygen Sensor: 4 Wires, 184.5 mm Long, Heated, Exact Fit (Part No.213-4537)
from
$69.99
GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Detects oxygen content in the exhaust gases to help optimize emissions
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
NTK – Switching Oxygen Sensor: 4 Wire, 12.25" Long, Heated, Direct Fit (Part No.21068)
from
$59.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Bosch – Oxygen Sensor: 4 Wire, 22" Long, Heated, Exact Fit (Part No.15128)
from
$56.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
NTK – Switching Oxygen Sensor: 4 Wire, 20.5" Long, Heated, Direct Fit (Part No.21556)
from
$79.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
DENSO – Oxygen Sensor: Downstream, 4 Wire, 12.40" Long, Heated, Exact Fit (Part No.234-4530)
from
$66.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
NTK – Switching Oxygen Sensor: 4 Wire, 16.5" Long, Heated, Direct Fit (Part No.21558)
from
$105.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
DENSO – Oxygen Sensor: 4 Wire, 12.24" Long, Heated, Exact Fit (Part No.234-4815)
from
$104.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
ACDelco – GM Original Equipment Oxygen Sensor (Part No.C5010426706ACD)
from
$99.22
The ACDelco GM Original Equipment Oxygen (O2) Sensor is a GM-recommended replacement for your vehicle’s original component. The Oxygen (O2) Sensor is a special feedback sensor on your vehicle’s exhaust system. This sensor measures the proportion of oxygen in the exhaust gases. Using this measurement, the engine management computer can adjust the air/fuel ratio near the optimum value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. This original equipment oxygen sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. When you are looking for a match to GM Original Equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done.
Product Features:
See More
Product Features:
- Detect oxygen content in the exhaust gases to optimize emissions and fuel economy
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – 4-Way Male Gray Multi-Purpose Pigtail (Part No.PT1366)
from
$72.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Oxygen Sensor Connector (Part No.PTA1687)
from
$47.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Oxygen Sensor Connector (Part No.PTA1685)
from
$34.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Top-Rated Fuel and Emissions Systems Brands For Your 2012 Chevrolet Equinox
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2012 Chevrolet Equinoxes. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch, FELPRO, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2012 Equinox start at just $7.49 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular Bosch 2012 Chevrolet Equinox Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2012 Chevrolet Equinox, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 2012 Chevrolet Equinox. With over 7 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $39.99, with an average price of just $63.78. Plus, with over 231 customer reviews and an average rating of 5 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular FELPRO 2012 Chevrolet Equinox Fuel and Emissions Systems
FELPRO auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2012 Chevrolet Equinox owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 2012 Equinox, Advance Auto Parts carries a full inventory of 5 FELPRO Fuel and Emissions Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these FELPRO Fuel and Emissions Systems range from $7.49 to $30.49, plus, with more than 112 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.
FAQs for 2012 Chevrolet Equinox Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 2012 Chevrolet Equinoxes?
Out of 139 Fuel and Emissions Systems that fit 2012 Chevrolet Equinoxes, the following parts are the top sellers:
- Fuel Injector O-Ring Kit (3504360) – $7.49
- Vapor Canister Purge Valve (18057381) – $59.99
- Fuel Cap: 10825, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (18481518) – $14.99
What’s the price range for 2012 Chevrolet Equinox Fuel and Emissions Systems?
Fuel and Emissions System prices for the 2012 Chevrolet Equinox start at $4.49 and go up to $997.09 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 2012 Chevrolet Equinox?
The average price for Fuel and Emissions Systems for the 2012 Chevrolet Equinox is $121.10. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet Equinox model years?
What are the cheapest Fuel and Emissions Systems for my 2012 Chevrolet Equinox?
The cheapest 2012 Chevrolet Equinox Fuel and Emissions Systems we carry in stock are:
- GM Drive Type Rivet (11910867) – $4.49
- Fuel Injector O-Ring Kit (12588115) – $5.29
- Fuel Tank Pressure Sensor Cover (12111389) – $5.79
- Secondary Air Injection Pump Check Valve Gasket (12111370) – $5.99
- Fuel Pressure Relief Valve Cap (12044334) – $6.29
What types of Fuel and Emissions Systems do you sell for my 2012 Chevrolet Equinox?
As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2012 Chevrolet Equinox:
Can I get help with 2012 Chevrolet Equinox Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.
What is your return policy for Chevrolet Equinox Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Chevrolet Equinox Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
