2012 Chevrolet Camaro Exhaust Parts

Below you will find various in-demand Chevrolet Exhaust Parts, components and accessories for your 2012 Camaro. Advance Auto Parts has popular Camaro parts like Exhaust Manifold and Headers, Exhaust Mufflers, Catalytic Converters and more. You’ll also find aftermarket and OEM Exhaust Parts for other Camaro model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2012 Chevrolet Camaro Exhaust Parts below and start saving instantly.

Popular 2012 Chevrolet Camaro Exhaust Parts Categories

Exhaust Manifold Hardware Kits

Exhaust Manifold and Headers

Mufflers

Catalytic Converters

Exhaust Manifold and Header Hardware

Exhaust System Kits

Exhaust Pipes

Exhaust Extension Pipes

Exhaust Manifold Gaskets

Exhaust Pipe and Flange Gaskets

Exhaust X Pipes

Essential Exhaust Parts for 2012 Chevrolet Camaros

from

$24.99

ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.

Product Features:

Material Is Not Affected By Corrosion Or Extreme Heat
The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
Substantially Stronger Than Grade 8 Hardware
Nominally Rated At 170,000 Psi Tensile Strength
Set of 12
0.75″ Overall Length

from

$56.99

Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.

Product Features:

16 per Package
Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
410 stainless steel
Minimum 180,000 PSI tensile strength
24 equally spaced clockwise teeth

from

$51.99

Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from stainless steel for durability and long life
BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$103.99

Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from stainless steel for durability and long life
BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$247.99

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler

Product Features:

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$78.99

Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:

RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life

from

$57.99

Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$215.99

Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.

from

$1077.00

Headers

from

$385.99

Product Features:

Innovative New Design
Increase Horsepower/Torque
Formed From Stainless Steel
Premium High Temp Gray Finish
Large 3in. Secondary Collector
Increase Scavenging
Smooth Exhaust Pulses

from

$396.98

CATALYTIC CONVERTER

from

$100.99

MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 91006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:

Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
Compact, lightweight construction enables installation in confined areas, welding is required.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$794.99

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:

CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$6.29

Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT — Designed to resist heat for long-lasting performance
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$16.79

AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT — Designed to resist heat for long-lasting performance
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$212.99

Give your vintage vehicle’s exhaust system an upgrade with a DynoMax? dual header kit. Designed to attach to OE headers, it features a special reducer that allows for a variety of mounting options.

Product Features:

COMPATIBILITY — Designed for 1982-89 Chevrolet Camaro and Pontiac Firebird, 305 Chevrolet small block V8 engine
BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with this kit that attaches to OE headers
FLEXIBLE MOUNTING — Special reducer design allows for a variety of mounting options
IMPROVED FLOW CAPACITY — Smooth bends improve flow capacity over traditional bends
SPECS — Extra-long tailpipes with side exits with a full 2.25-in. diameter; tail pipes exit on driver’s side at bumper; dual kit runs down right-hand side between frame and driveshaft
COMPLETE SOLUTION — Includes all the necessary clamps, hangers, gaskets, mounting hardware, intermediate, extension and tail pipes
PREMIUM MATERIALS — Made from quality aluminized steel for durability and long life
PREMIUM MATERIALSÿ–ÿMade from quality aluminized steel for durability and long life
BETTER TOGETHER — Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
WARNING — Not legal for use on pollution-controlled motor vehicles; headers are for racing use only and not intended or applicable for highway use

from

$2061.99

The MagnaFlow 2016-2024 Chevrolet Camaro Competition Series Axle-Back Performance Exhaust System 19336 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 6.2L 2016-2024 Chevrolet Camaro with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s axle-back layout replaces your ride’s exhaust system from near the rear axle on back. Exhaust system 19336 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19336’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:

Crafted from 409 stainless steel with all mandrel-bent tubing
Increased horsepower and torque
Aggressive exterior sound

from

$1403.99

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
Each system is built from premium, high-quality austenitic T-304 stainless steel
Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

from

$17.99

GM Genuine Parts Exhaust Manifold Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They help form a gas-tight connection between the exhaust manifold and cylinder heads. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps prevent exhaust leaks
Helps provide a tight seal where the exhaust manifold mounts to the engine block
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$32.99

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-temperature steel core/graphite faced exhaust material
Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
Conforms to and seals minor surface irregularities
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Anti-Stick Properties
Easy Removal For Disassembly

from

$26.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold

from

$47.99

This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud.
Location-specific – engineered to fit the exhaust manifold on the front left or rear right on specified GM and Isuzu vehicles.
Complete kit – includes clamp and fasteners for a thorough, secure repair
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$27.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Designed and manufactured to meet the needs of the exhaust system repair environment.
Verified, tested and certified proprietary Organic coating resists corrosion.
Tightly controlled coefficient of friction ensures reliable installation.
Application specific kit contents
Self-locking nuts (where applicable).

from

$15.99

Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.

Product Features:

Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$255.99

Made from quality materials for durability, DynoMax® direct fit X-pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from stainless steel for durability and long life
BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with DynoMax® pipe
BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

Upgrade your 2012 Chevrolet Camaro with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 2012 Chevrolet Camaro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Exhaust Parts are key to keeping your Camaro functioning at its best. At Advance Auto Parts, we offer a wide selection of 66 Exhaust Parts for the 2012 Chevrolet Camaro, designed to meet your needs without breaking the bank. From Exhaust Manifold and Header replacements to Exhaust Mufflers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2012 Chevrolet Camaro at great prices. Our Exhaust Parts inventory for this model ranges from just $11.49 to $2,518.99, with an average price of $488.91. Our 66 Exhaust Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 2012 Chevrolet Camaro without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Chevrolet Camaro, we stock popular OEM and aftermarket Exhaust Parts from top names like FELPRO, Dorman, Mahle, and more. FELPRO Exhaust Parts start at just $11.49 and boast an impressive 5 stars average rating from customers. Dorman and Mahle also bring quality to the table, with Exhaust Parts available starting at $15.99, and at an average 4 stars rating. With 408 customer reviews and counting, our 2012 Chevrolet Camaro Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Chevrolet Camaro is always ready to roll. We’re committed to providing you with everything you need to keep your Camaro in top shape, all in one place. Start shopping confidently below for your 2012 Chevrolet Camaro!

Best-Selling Exhaust Manifold and Headers for 2012 Chevrolet Camaros

Enhance the driving experience in your Chevrolet with 10 quality Exhaust Manifold and Header components, starting at $12.79.

show more show less

from

$17.99

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.79

Black oxide finished carbon steel header bolts have a compact hex head and the flange is ideal for use where space is minimal – your typical header flange. Includes twelve (12) M8 – 1.25 x 25mm header bolts.

Product Features:

12 per Package
Fits GM LS Series Engines
Black Oxide Finish Resists Corrosion

from

$40.99

Material Is Not Affected By Corrosion Or Extreme Heat
The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
Substantially Stronger Than Grade 8 Hardware
Nominally Rated At 170,000 PSI Tensile Strength
Set of 12
3/8” Wide Header Flange
1.181? Underhead Length

from

$958.99

JBA long tube headers are the number one choice for maximum performance gains and high RPMefficiency. These long tube designs are dyno and race proven to deliver the greatest possible increase inhorsepower and torque throughout the RPM range. All JBA lo

Product Features:

JBA Performance Exhaust 6813SJT 1 7/8″ Header Long Tube Stainless Steel 2010-14 Camaro SS Titanium Ceramic
3/8″ thick CNC laser-cut flanges

from

$942.99

JBA Performance Exhaust 6813SJS 1 7/8″ Header Long Tube Stainless Steel 2010-14 Camaro SS Silver Ceramic
3/8″ thick CNC laser-cut flanges

from

$919.99

Flowmaster’s Scavenger Series Elite shorty headers are designed to replace the restrictive factory manifolds. These high quality headers are manufactured from stainless steel and are ceramic coated for maximum durability. They feature 1-3/4 in. primary tubes, 3/8 in. thick laser cut flanges and factory collector connections, ensuring a direct-fit, leak free installation. Like all Flowmaster products, the benefits include improved throttle response, power and engine efficiency. Designed for an easy fit, these headers include gaskets and necessary hardware for easy installation. Note: this product has been granted a California Air Resources Board (CARB) exemption, an E.O. number, or is a direct or consolidated replacement part. It is 50-state legal, per the application guide.

Product Features:

Stainless steel construction
50 state emissions certified
Dyno tuned for maximum performance
High temperature ceramic coated
0.375 thick laser cut flanges

from

$810.99

JBA Performance Exhaust 6813S 1 7/8″ Header Long Tube Stainless Steel 2010-14 Camaro SS
3/8″ thick CNC laser-cut flanges

from

$436.99

LS Cast Iron Exhaust Manifold

from

$28.99

Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance.
Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$22.49

Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Popular 2012 Chevrolet Camaro Exhaust Mufflers

Customize your Chevrolet with 8 Exhaust Mufflers products like Mufflers, all priced under $247.99.

show more show less

from

$126.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$113.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$123.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$126.99

from

$154.99

This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$247.99

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$246.99

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$133.99

This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

Top Picks for 2012 Chevrolet Camaro Catalytic Converters

Upgrade Chevrolet Camaros with top-quality Catalytic Converters parts, including 9 OEM and aftermarket selections for your 2012 model.

show more show less

from

$194.99

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
Compact, lightweight construction enables installation in confined areas, welding is required.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$1481.99

Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn¿t require specialized fabrication and/or welding
DIRECT-FIT DESIGNá–áDirect-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installationáthatádoesn┐t require specialized fabricationáand/or welding
KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
KEEPS CHECK ENGINE LIGHT OFFáFOR EMISSIONS CODESá–áOE-style high-technologyáwashcoatáand optimaláprecious metal load delivers required reduction in tailpipe emissionsáto match vehicle application
STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
STRONGáANDáDURABLEá–áFeatures thick OE-style flanges, hangersáandábrackets for strength andádurability
OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
OE-STYLE DESIGNá–áFeatures aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter

from

$1139.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49939. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2015 Chevrolet Camaro. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$1129.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49938. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2015 Chevrolet Camaro. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$945.99

Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker« Ultra« Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
DIRECT-FIT DESIGNá–áDirect-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installationáthatádoesn┐t require specialized fabricationáand/or welding
KEEPS CHECK ENGINE LIGHT OFFáFOR EMISSIONS CODESá–áOE-style high-technologyáwashcoatáand optimaláprecious metal load delivers required reduction in tailpipe emissionsáto match vehicle application
STRONGáANDáDURABLEá–áFeatures thick OE-style flanges, hangersáandábrackets for strength andádurability
OE-STYLE DESIGNá–áFeatures aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter

from

$724.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51683. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2012-2015 Chevrolet Camaro. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$718.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51682. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2012-2015 Chevrolet Camaro. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$265.99

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation

from

$178.99

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51176 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
Compact, lightweight construction enables installation in confined areas, welding is required.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

In-Demand Exhaust Pipes for 2012 Chevrolet Camaros

Select from 10 premium Exhaust Pipes parts for your 2012 Chevrolet Camaro, with prices ranging from $14.99 to $785.99.

show more show less

from

$14.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$15.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$248.99

JBA 409 series stainless steel mid-pipes are the perfect compliment to your JBA Headers or JBA Exhaust system. These systems open up the flow on exhaust systems for a dramatic increase in performance and improved sound.

Product Features:

JBA Performance Exhaust 6813SD 3″ Stainless Steel Mid-Pipe 2010-14 Camaro without Cats 409SS
O2 sensor provisions where required

from

$785.99

Along with the distinctive Borla Sound of Power recognized by motoring enthusiasts everywhere, upgrading your ride with a Borla exhaust gives you a boost in power and torque, improved fuel economy, longer engine life and refined motorsport styling. But most of all, Borla gives you the intoxicating rush that comes with every squeeze of the throttle, the thrill of raging power with every shift, and a heart-pounding soundtrack to match. More than anything else, we understand that we build far more than exhaust systems. We build excitement. Borla is proud to offer a true Made in the USA product sold around the world. Borla products are constructed using T-304 stainless steel for long life and sharp appearance and feature all welded construction for maximum durability. Everything weve learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities. Everywhere you look, Borlas spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems. For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar. Unlike any other exhaust brand, Borlas systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.

Product Features:

Built to provide long-lasting service
Made of austenitic stainless steel for long life
Adds horsepower and torque throughout the rev range

from

$255.99

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from stainless steel for durability and long life
BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with DynoMax® pipe
BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$113.99

Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from stainless steel for durability and long life
BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$103.99

Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from stainless steel for durability and long life
BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$51.99

Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from stainless steel for durability and long life
BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$43.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$43.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

Most Sold 2012 Chevrolet Camaro Exhaust Gaskets

Explore our best-selling Chevrolet parts for the 2012 Camaro among 9 OEM and aftermarket options starting from $11.49.

show more show less

from

$31.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold
Contains all gaskets and seals to remove and replace exhaust manifold

from

$35.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$11.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold
Contains all gaskets and seals to remove and replace exhaust manifold

from

$17.99

Helps prevent exhaust leaks
Helps provide a tight seal where the exhaust manifold mounts to the engine block
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$49.49

Multi-Layered Steel (MLS) exhaust and header collector gaskets are designed for extreme cylinder pressures produced by high horsepower high compression turbo-charged, supercharged and nitrous oxide injected engines. Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal extreme exhaust pressures. Total gasket thickness .075 inch. Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.

Product Features:

Multi Layer Stainless Steel 3-Layers
Round Port 1.75″ Diameter
Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.
Thickness .072″
Fits GM LS Series Engines 1997-’15

from

$38.49

Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:

Reusable header or exhaust manifold gasket set
Conforms to and seals surface irregularities (warp
Will not shrink deteriorate or blow out
Compresses to .060 creates tight leak proof seal

from

$37.92

Exhaust Manifold Gas

from

$32.22

Exhaust Manifold Gas

from

$27.49

As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Top-Rated Exhaust Parts Brands For Your 2012 Chevrolet Camaro

Shop for the best-rated brands offering Exhaust Parts and other products for your 2012 Chevrolet Camaros. Below you’ll find some of our best rated Exhaust Parts from FELPRO, Dorman, and Mahle, and more. Exhaust Parts from these brands that fit a 2012 Camaro start at just $11.49 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2012 Chevrolet Camaro Exhaust Parts

When it comes to maintaining or upgrading your 2012 Chevrolet Camaro, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 2012 Chevrolet Camaro. With over 4 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $18.44. Plus, with over 38 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$31.99

(37)

Exhaust Manifold Gasket Set

“Perfect fit”

from
$14.99

This product is not rated

Exhaust Pipe Flange Gasket

“”

from
$15.29

This product is not rated

Exhaust Pipe Flange Gasket

“”

Popular Dorman 2012 Chevrolet Camaro Exhaust Parts

Dorman auto parts is one of the highest quality Exhaust Part brands in the market. Any 2012 Chevrolet Camaro owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2012 Camaro, Advance Auto Parts carries a full inventory of 6 Dorman Exhaust Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Dorman Exhaust Parts range from $15.99 to $51.99, plus, with more than 50 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.

from
$22.49

This product is not rated

Exhaust Manifold Hardware Kit

“”

from
$51.99

(10)

Exhaust Manifold Clamp Repair

“4.8l vortec exhaust manifold gasket leak repair”

from
$28.99

This product is not rated

Exhaust Manifold Hardware Kit – M8-1.25 Stainless Steel

“”

FAQs for 2012 Chevrolet Camaro Exhaust Parts

Which Exhaust Parts are best-sellers for 2012 Chevrolet Camaros?

Out of 66 Exhaust Parts that fit 2012 Chevrolet Camaros, the following parts are the top sellers:

Exhaust Manifold Gasket Set (11464852) – $35.99
Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (20291377) – $113.99
Black Oxide Header Bolts for Tight Spaces (10540565) – $12.79

What’s the price range for 2012 Chevrolet Camaro Exhaust Parts?

Exhaust Part prices for the 2012 Chevrolet Camaro start at $11.49 and go up to $2,518.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 2012 Chevrolet Camaro?

The average price for Exhaust Parts for the 2012 Chevrolet Camaro is $488.91. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Chevrolet Camaro model years?

Yes, we currently carry Exhaust Parts for 50 model years of Chevrolet Camaros between 1967 and 2024. Exhaust Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Exhaust Parts for my 2012 Chevrolet Camaro?

The cheapest 2012 Chevrolet Camaro Exhaust Parts we carry in stock are:

Exhaust Manifold Gasket Set (11401898) – $11.49
Black Oxide Header Bolts for Tight Spaces (10540565) – $12.79
Exhaust Pipe Flange Gasket (15780090) – $14.99
Exhaust Pipe Flange Gasket (12081603) – $15.29
Exhaust Manifold Hardware Kit (10840978) – $15.99

What are the top-rated Exhaust Parts that fit the 2012 Chevrolet Camaro?

Out of 408 reviews by customers, our 2012 Chevrolet Camaro Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2012 Chevrolet Camaro and their top-rated products:

Exhaust Gaskets
- Exhaust Manifold Gasket Set (11401898) – $11.49
- Exhaust Manifold Gasket Set (11464852) – $35.99
- Exhaust Manifold Gasket Set (15780316) – $31.99
Exhaust System Kits
- Exhaust Manifold Gasket Set (11401898) – $11.49
- Exhaust Manifold Gasket Set (11464852) – $35.99
- Exhaust Manifold Gasket Set (15780316) – $31.99
Exhaust Mufflers
- Exhaust Manifold Gasket Set (11401898) – $11.49
- Exhaust Manifold Gasket Set (11464852) – $35.99
- Exhaust Manifold Gasket Set (15780316) – $31.99

What types of Exhaust Parts do you sell for my 2012 Chevrolet Camaro?

As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 2012 Chevrolet Camaro:

Can I get help with 2012 Chevrolet Camaro Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Exhaust Parts and more.

What is your return policy for Chevrolet Camaro Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Camaro Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Chevrolet Camaro Exhaust Parts

ARP Auto Racing – 0.750" L, Hex Style Head Type, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1101)

Mr. Gasket – Exhsthdrbolt (Part No.2231G)

Dynomax – 51068 Exhaust Intermediate Pipe (Part No.51068)

Dynomax – 54710 Exhaust Intermediate Pipe (Part No.54710)

Dynomax – Ultra Flo Muffler: Direct Fit, Stainless Steel, 11" L, 2.5" In, 2.5" Out, Oval (Part No.53875)

Walker – SoundFX Muffler, Universal/ Fabrication Needed (Part No.18119)

Walker – Exhaust Tail Pipe 2.25" Inlet (OD) 2.5" Outlet (OD) (Part No.43771)

Flowmaster Inc. – Prebent Tailpipes – 3.00 in. Dump Exit – Pair (Part No.15822)

Hooker Headers – Headers (Part No.2106-1HKR)

Flowtech – Afterburner; Headers (Part No.49100FLT)

Walker – CATALYTIC CONVERTER (Part No.81328)

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.91006)

Walker – CalCat Catalytic Converter- CARB Certified, Direct Replacement, No Fabrication Needed (Part No.81174)

Felpro – Exhaust Pipe Flange Gasket (Part No.61077)

Walker – Exhaust Pipe Flange Gasket (Part No.31624)

Walker – Exhaust Pipe Flange Gasket (Part No.31550)

Dynomax – Dual Header Exhaust Kit for 82-89 Camaro/Firebird 305 V8 (Part No.89009)

MagnaFlow – Competition Series Axle-Back Performance Exhaust System (Part No.19336)

Borla Performance Exhaust – Axle-Back Exhaust System – S-Type (Part No.11922CFBA)

GM Genuine Parts – Exhaust Manifold Gasket (Part No.12617944)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5900)

Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 95585)

Dorman – Exhaust Manifold Clamp Repair (Part No.917-142)

Felpro – Exhaust Flange (Part No.ES 75111)

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413)

Dynomax – 54714 Exhaust Pipe (Part No.54714)

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413B)

Mr. Gasket – Black Oxide Header Bolts for Tight Spaces (Part No.918G)

ARP Auto Racing – For Use With Chevy Ls V8 Engine, M8 Thread Size, Hex Head, Black Oxide, Set Of 12 (Part No.134-1102)

JBA Performance – 6813SJT 1 7/8" Header Long Tube Stainless Steel 2010-14 Camaro SS Titanium Ceramic (Part No.6813SJT)

JBA Performance – 6813SJS 1 7/8" Header Long Tube Stainless Steel 2010-14 Camaro SS Silver Ceramic (Part No.6813SJS)

Flowmaster Inc. – Header 409S – Block Hugger – 3.00 in. Stock Flange Outlet – Pair (Part No.814121)

JBA Performance – 6813S 1 7/8" Header Long Tube Stainless Steel 2010-14 Camaro SS (Part No.6813S)

Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501HKR)

Dorman – Help – Exhaust Manifold Hardware Kit – M8-1.25 Stainless Steel (Part No.03413HP)

Dorman – Exhaust Manifold Hardware Kit (Part No.675-226)

Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)

Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942548)

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8042443)

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842448)

Flowmaster Inc. – Delta 40 Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842543)

Dynomax – Ultra Flo Muffler: Direct Fit, Stainless Steel, 11" L, 2.5" In, 2.5" Out, Oval (Part No.53875)

Dynomax – Ultra Flo Muffler: Direct Fit, Stainless Steel, 14" L, 2.5" In, 4" Out, Oval (Part No.17580)

Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942543)

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51206)

Walker – Ultra EPA Direct Fit Catalytic Converter (Part No.74004)

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.49939)

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.49938)

Walker – Ultra EPA Direct Fit Catalytic Converter (Part No.74005)

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.51683)

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.51682)

Walker – CalCat CARB Universal Catalytic Converter 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.84206)

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51176)

Felpro – Exhaust Pipe Flange Gasket (Part No.61012)

Felpro – Exhaust Pipe Flange Gasket (Part No.61652)

JBA Performance – 6813SD 3" Stainless Steel Mid-Pipe 2010-14 Camaro without Cats 409SS (Part No.6813SD)

Borla Performance Exhaust – 1015 Camaro SS 6.2L V8 AT/MT RWD 2Dr XPipe 2.5in (Part No.60512)

Dynomax – 54714 Exhaust Pipe (Part No.54714)

Dynomax – 54711 Exhaust Intermediate Pipe (Part No.54711)

Dynomax – 54710 Exhaust Intermediate Pipe (Part No.54710)

Dynomax – 51068 Exhaust Intermediate Pipe (Part No.51068)

Dynomax – Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.51070)

Dynomax – Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.51071)

Felpro – Exhaust Manifold Gasket Set (Part No.MS 92467)

MAHLE Original – Exhaust Manifold Gasket Set (Part No.MS16124)

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97344)

GM Genuine Parts – Exhaust Manifold Gasket (Part No.12617944)

Mr. Gasket – Mls Exhaust Gasket (Part No.4805G)

Mr. Gasket – Exhsthdrgskt (Part No.7406G)

ACDelco – Exhaust Manifold Gas (Part No.A8111430337ACD)

Elring – Exhaust Manifold Gas (Part No.A8111353782ELR)

Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10604-01)