2012 Cadillac SRX Suspension Parts

Name: Steering Angle Sensor
Brand: Carquest Premium
SKU: SBA3862
Price: 94.99 USD

Below you will find various in-demand Cadillac Suspension Parts, components and accessories for your 2012 SRX. Advance Auto Parts has popular SRX parts like Coil and Leaf Springs, Air Suspension and Kits, Shocks and Struts and more. You’ll also find aftermarket and OEM Suspension Parts for other SRX model years including 2007, 2008, 2009, 2010, 2011, 2013, 2014, 2015, 2016 and more. Select a category of 2012 Cadillac SRX Suspension Parts below and start saving instantly.

Popular 2012 Cadillac SRX Suspension Parts Categories

Suspension Self-Leveling Unit Fluids

Suspension Strut and Coil Spring Assemblies

Rear Shock and Struts

Front Shock and Struts

Coil Spring Sets

Active Suspension Relays

Lower Control Arms

Lower Control Arm Bushings

Strut Bellows

Strut Mounts

Lateral Arms

Stability Control Steering Angle Sensors

Air Suspension Compressor Bolt

Essential Suspension Parts for 2012 Cadillac SRXes

from

$94.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$389.99

ShkAbsrbr

from

$181.08

SACHS Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance and quality standards. SACHS products have the best dampening characteristics with an application-tuned valve pairing longevity with superior comfort and control for vehicles in any road condition.

Product Features:

TwinTube Design
DURABILITY – Micro-Polished Chrome Piston Rods: SACHS micro-polished chromed piston rods have been hardened for maximum strength to provide the longest service life. Our chrome finish helps fight rust while the low-friction surface effectively prevents seal leakage.
COMFORT and PERFORMANCE – Banded Piston: Our engineered polymer piston band immediately responds to suspension movements even at slow speeds. The piston band effectively seals the working cylinder allowing the valves to operate at 100% efficiency. Valves with a banded piston can be finely tuned for specific vehicles to consistently provide the intended comfort and performance.
OEM TECHNOLOGY – Low Friction Seal: SACHS advanced seal technology uses a special NBR rubber which is highly wear resistant and can withstand temperatures to 260 degrees F, keeping oil in , and contaminants out. Engineered with low friction movement in mind, out design helps maintain tuning characteristics.
PRECISE TUNING – Sintered Metal Valves: Our high quality valve design enables precise oil flow by using sintered metal valves. Tight tolerances and strength from sintered metal allow for precise tuning of compression and rebound rates that restore the original handling dynamics.
Endurance – Polished Working Cylinder: SACHS working cylinders are drawn to precise dimensions and polished ultra-smooth to prevent piston band wear. Our technology permits close tuning tolerances while reducing friction and heat for the utmost endurance.

from

$28.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$17.29

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$150.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$34.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$24.49

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$240.13

Control Arm Bushing

from

$3.79

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards.
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$97.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$133.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$207.02

Strut Mount

from

$79.99

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$151.39

Control Arm

from

$187.00

Control Arm

from

$150.71

Control Arm

from

$74.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils

from

$140.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
1-3/8 inch (34.9 mm) bore (On most applications)
5/8-inch (15.9 mm) diameter piston rod (On most applications)
Premium – Limited Lifetime Warranty
For Commercial Usage Refer to Product Warranty

from

$115.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

KYB Recommended Orem Replacement Shock For Subs And Crossovers
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Cadillac Six
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Made In Use
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
Protect Your New Struts From Dirt, Debris And Salt With A KYB Strut Boot, Part Number: Sb101

from

$6.29

Max Performance Synthetic Power Steering Fluid

from

$14.99

Modern transmissions are better than ever, with more gears to help improve fuel efficiency and acceleration. Greater performance calls for greater protection. Valvoline Extended Protection Full Synthetic ATF features our exclusive Dual Defense Additive Technology for two layers of protection against metal-on-metal contact and thermal breakdown, all while minimizing wear on clutch components. In fact, Valvoline Extended Protection Full Synthetic ATF is 45% stronger against breakdown compared to major brand DEX/MERC oxidative PDSC performance. Proven to maximize transmission life, our patented formula is suitable for use in 92% of vehicles in light duty automatic transmissions 2010 and newer. Keep your modern vehicle shifting smoothly, mile after mile, with the ultimate protection you can only expect from Valvoline, the #1 ATF brand.

Product Features:

The ultimate protection for your automatic transmission
45% stronger against breakdown
Dual Defense Additive Technology combines friction modifiers and anti-wear additives for two layers of protection
Suitable for use in over 92% of vehicles in light duty automatic transmissions 2010 and newer

from

$36.49

Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

Upgrade your 2012 Cadillac SRX with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2012 Cadillac SRX, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Suspension Parts are key to keeping your SRX functioning at its best. At Advance Auto Parts, we offer a wide selection of 27 Suspension Parts for the 2012 Cadillac SRX, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Air Suspension and Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2012 Cadillac SRX at great prices. Our Suspension Parts inventory for this model ranges from just $3.79 to $261.99, with an average price of $100.88. Our 27 Suspension Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 2012 Cadillac SRX without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Cadillac SRX, we stock popular OEM and aftermarket Suspension Parts from top names like Valvoline Moog, and more. Valvoline Suspension Parts start at just $14.99 and boast an impressive 5 stars average rating from customers. With 2,052 customer reviews and counting, our 2012 Cadillac SRX Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Cadillac SRX is always ready to roll. We’re committed to providing you with everything you need to keep your SRX in top shape, all in one place. Start shopping confidently below for your 2012 Cadillac SRX!

Best-Selling Coil and Leaf Springs for 2012 Cadillac SRXes

Enhance the driving experience in your Cadillac with 3 quality Coil and Leaf Spring components, starting at $129.99.

show more show less

from

$150.99

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$133.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$129.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

Top Picks for 2012 Cadillac SRX Shocks and Struts

Upgrade Cadillac SRXes with top-quality Shocks and Struts parts, including 10 OEM and aftermarket selections for your 2012 model.

show more show less

from

$13.99

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$13.29

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$18.99

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$34.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$129.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
Premium – Limited Lifetime Warranty
For Commercial Usage Refer to Product Warranty

from

$140.99

EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
1-3/8 inch (34.9 mm) bore (On most applications)
5/8-inch (15.9 mm) diameter piston rod (On most applications)
Premium – Limited Lifetime Warranty
For Commercial Usage Refer to Product Warranty

from

$115.99

KYB Recommended Orem Replacement Shock For Subs And Crossovers
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Cadillac Six
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Made In Use
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
Protect Your New Struts From Dirt, Debris And Salt With A KYB Strut Boot, Part Number: Sb101

from

$261.99

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

from

$207.02

Strut Mount

from

$79.99

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

In-Demand Stability Controls for 2012 Cadillac SRXes

Select from 1 premium Stability Controls parts for your 2012 Cadillac SRX.

show more show less

from

$94.99

Most Sold 2012 Cadillac SRX Control Arms

Explore our best-selling Cadillac parts for the 2012 SRX among 7 OEM and aftermarket options starting from $74.99.

show more show less

from

$240.13

Control Arm Bushing

from

$97.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$151.39

Control Arm

from

$150.71

Control Arm

from

$187.00

Control Arm

from

$187.00

Control Arm

from

$74.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils

Top-Rated Suspension Parts Brands For Your 2012 Cadillac SRX

Shop for the best-rated brands offering Suspension Parts and other products for your 2012 Cadillac SRXes. Below you’ll find some of our best rated Suspension Parts from Valvoline and Moog, and more. Suspension Parts from these brands that fit a 2012 SRX start at just $14.99 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2012 Cadillac SRX Suspension Parts

When it comes to maintaining or upgrading your 2012 Cadillac SRX, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 2012 Cadillac SRX. With over 2 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $25.74. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$14.99

This product is not rated

Extended Protection Automatic Transmission Fluid, 1 Quart

“”

from
$36.49

(446)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

“Good product”

Popular Moog 2012 Cadillac SRX Suspension Parts

Moog auto parts is one of the highest quality Suspension Part brands in the market. Any 2012 Cadillac SRX owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2012 SRX, Advance Auto Parts carries a full inventory of 3 Moog Suspension Parts. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Moog Suspension Parts range from $34.99 to $150.99, plus, with more than 12 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from
$74.99

This product is not rated

Control Arm

“”

from
$150.99

This product is not rated

Coil Spring Set

“”

from
$34.99

(12)

Strut Bellows

“Worked as designed”

FAQs for 2012 Cadillac SRX Suspension Parts

Which Suspension Parts are best-sellers for 2012 Cadillac SRXes?

Out of 27 Suspension Parts that fit 2012 Cadillac SRXes, the following parts are the top sellers:

Strut Bellows (20518181) – $34.99
Multi Purpose Relay (12460010) – $28.49
Multi Purpose Relay (12453392) – $17.29

What’s the price range for 2012 Cadillac SRX Suspension Parts?

Suspension Part prices for the 2012 Cadillac SRX start at $3.79 and go up to $261.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2012 Cadillac SRX?

The average price for Suspension Parts for the 2012 Cadillac SRX is $100.88. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Cadillac SRX model years?

Yes, we currently carry Suspension Parts for 12 model years of Cadillac SRXes between 2004 and 2016. Suspension Parts are bought most frequently for the following model years: 2016, 2015, 2014, 2013, 2011, 2010, 2009, 2008, and 2007.

What are the cheapest Suspension Parts for my 2012 Cadillac SRX?

The cheapest 2012 Cadillac SRX Suspension Parts we carry in stock are:

Body Bolt M6-1.0 x 25mm (10658534) – $3.79
Max Performance Synthetic Power Steering Fluid (11150908) – $6.29
Shock-Mate Shock Absorber Boot Kit (5100009) – $13.29
Shock-Mate Shock Absorber Boot Kit (15740047) – $13.99
Extended Protection Automatic Transmission Fluid, 1 Quart (50012424) – $14.99

What are the top-rated Suspension Parts that fit the 2012 Cadillac SRX?

Out of 2,052 reviews by customers, our 2012 Cadillac SRX Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2012 Cadillac SRX and their top-rated products:

Shocks and Struts
- Shock-Mate Shock Absorber Boot Kit (5100009) – $13.29
- Shock-Mate Shock Absorber Boot Kit (15740047) – $13.99
- Jounce Bumper and Bellows (19170663) – $18.99

What types of Suspension Parts do you sell for my 2012 Cadillac SRX?

As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 2012 Cadillac SRX:

Can I get help with 2012 Cadillac SRX Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Suspension Parts and more.

What is your return policy for Cadillac SRX Suspension Parts?

Advance Auto Parts keeps returns simple. For new Cadillac SRX Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Cadillac SRX Suspension Parts

Carquest Premium – Steering Angle Sensor (Part No.SBA3862)

Suncore – ShkAbsrbr (Part No.155G-11-F)

Sachs – Suspension Strut Assembly, TwinTube Design (Part No.L3000849011SAC)

Carquest Premium – Multi Purpose Relay (Part No.RAA1236)

Carquest – Multi Purpose Relay (Part No.83A1008)

MOOG – Coil Spring Set (Part No.81731)

MOOG – Strut Bellows (Part No.K90460)

KYB – Jounce Bumper and Bellows (Part No.SB132)

ACDelco – Control Arm Bushing (Part No.L2030661809ACD)

Dorman – Body Bolt M6-1.0 x 25mm (Part No.963-232)

Dorman – Suspension Lateral Link (Part No.523-276)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-920058)

ACDelco – Strut Mount (Part No.L3030530434ACD)

Monroe – Strut-Mate Suspension Strut Mount (Part No.902051)

ACDelco – Control Arm (Part No.L2000686288ACD)

Autopart International Inc – Control Arm (Part No.L20001925739API)

ACDelco – Control Arm (Part No.L2000686290ACD)

MOOG – Control Arm (Part No.RK643552)

Monroe – OESpectrum Light Truck Shock Absorber (Part No.37350)

KYB – Gas Shock (Part No.344659)

Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)

Valvoline – Extended Protection Automatic Transmission Fluid, 1 Quart (Part No.899179)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

MOOG – Coil Spring Set (Part No.81731)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-920058)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920058)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Dorman – Body Bolt M6-1.0 x 25mm (Part No.963-232)

Carquest Premium – Multi Purpose Relay (Part No.RAA1236)

Carquest – Multi Purpose Relay (Part No.83A1008)

Valvoline – Extended Protection Automatic Transmission Fluid, 1 Quart (Part No.899179)

Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

KYB – Jounce Bumper and Bellows (Part No.SB101)

MOOG – Strut Bellows (Part No.K90460)

Monroe – OESpectrum Strut (Part No.72909)

Monroe – OESpectrum Light Truck Shock Absorber (Part No.37350)

KYB – Gas Shock (Part No.344659)

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172909)

ACDelco – Strut Mount (Part No.L3030530434ACD)

Monroe – Strut-Mate Suspension Strut Mount (Part No.902051)

Carquest Premium – Steering Angle Sensor (Part No.SBA3862)

ACDelco – Control Arm Bushing (Part No.L2030661809ACD)

Dorman – Suspension Lateral Link (Part No.523-276)

ACDelco – Control Arm (Part No.L2000686288ACD)

ACDelco – Control Arm (Part No.L2000686290ACD)

Autopart International Inc – Control Arm (Part No.L20001957240API)

Autopart International Inc – Control Arm (Part No.L20001925739API)

MOOG – Control Arm (Part No.RK643552)