2012 Cadillac SRX Fuel and Emissions Systems

Name: Oxygen Sensor: Downstream, 4 Wire, 31.50" Long, Heated, Exact Fit
Brand: DENSO
SKU: 234-4338
Price: 128.99 USD

Below you will find various in-demand Cadillac Fuel and Emissions Systems, components and accessories for your 2012 SRX. Advance Auto Parts has popular SRX parts like Fuel Injectors, Oxygen Sensors, Air Flow Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other SRX model years including 2007, 2008, 2009, 2010, 2011, 2013, 2014, 2015, 2016 and more. Select a category of 2012 Cadillac SRX Fuel and Emissions Systems below and start saving instantly.

Popular 2012 Cadillac SRX Fuel and Emissions Systems Categories

Fuel Tank Cleaning Kits

Fuel Pressure Sensors

Air Flow Meters and Mass Air

Gas Caps

Fuel Pumps

Oxygen Sensors

Vapor Canister Purge Valves

Vapor Canister Vent Solenoids

Fuel Injection Pressure Sensors

MAP-Barometric Pressures

Vapor Canister Vent Valves

Manifold Air Pressure Sensors

Canister Purge Solenoids

Direct Injection High Pressure Fuel Pumps

Fuel Injection Fuel Rail Pressure Sensors

Fuel Injectors

Fuel Tank Sender Retainers

Vapor Canisters

Fuel Injection Fuel Feed Pipes

Fuel Tank Pressure Sensors

Fuel Pressure Relief Valve Caps

Flex Fuel Sensors

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Fuel Injector Seal Kits

Fuel Injector Gaskets

Fuel Tank Lock Rings

Secondary Air Injection Relays

Fuel Level Sensors

Fuel Tank Sending Units

Fuel Pump Tank Seals

Oxygen Sensor Connectors

Fuel Feed Lines

Diesel Particulate Filter (DPF) Relays

Fuel Pump Mounting Gasket Set

Fuel Rail Pressure Relief Valves

Fuel Tank Sending Unit O-Rings

Fuel Pressure Sensor Covers

Fuel Cap Tester Adapters

Diverter Valve Connectors

Fuel Heater Relays

Fuel Injector Seal Tool Set

Essential Fuel and Emissions Systems for 2012 Cadillac SRXes

from

$128.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$38.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$99.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$24.99

CARQUEST fuel injector seal kits include the necessary o-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials.
Services one injector.

from

$67.99

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$14.99

GM Genuine Parts Fuel Tank Sender Retainers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These retainers help align and secure your vehicle’s fuel tank sender. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Help align and secure fuel tank sender
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$268.99

GM Genuine Parts Vapor Canisters are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These canisters capture and store evaporating fuel vapors from the fuel tank to be drawn into the intake manifold during engine operation. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps reduce harmful pollutants from entering the atmosphere
Captures fuel vapors to be re-burned in the engine
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$10.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$134.99

ACDelco GM Original Equipment Fuel Level Sensors are GM-recommended replacements for your vehicle’s original components. These sensors measure fuel level changes in your vehicle’s fuel tank, which are displayed on the vehicle’s fuel gauge. These original equipment sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Measures fuel level changes displayed on fuel gauge
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$21.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$77.99

CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:

Each unit is 100% tested to OE specifications.
Includes new o-rings and seals made of premium OE quality materials.
Includes application specific technical bulletin, where applicable.

from

$58.99

GM Genuine Parts Vapor Canister Vent Solenoids are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These solenoids communicate with the valve to open and close, allowing air to pass in and out of the vapor canister vent. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Controls fresh air flow to the canister
Sends fuel vapors to the engine for re-burn
Helps control fuel tank pressure
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$93.99

This fuel injection fuel feed pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel injection fuel feed pipe is designed to match the fit and function of the original pipe on specified applications
Restores functionality – reliable replacement for an original part that has failed due to heat or vibration
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$19.49

A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part
Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience

from

$180.99

ACDelco GM Original Equipment Flex Fuel Sensors monitor the ethanol content of the fuel in your flex fuel vehicle, and are GM-recommended replacements for your vehicle’s original components. The flex fuel sensor signal is used by the engine control module to adjust the air/fuel mixture and ignition timing for efficient operation. These original equipment flex fuel sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Supplies accurate readings to the ECM to make proper adjustments for gas mixture
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$53.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$18.99

GM Genuine Parts Fuel Tank Sending Unit O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These O-rings help seal out contaminants, and help protect your vehicle’s fuel tank sending unit. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Help seal out contaminants
Help protect fuel tank sending unit
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$89.99

ACDelco GM Original Equipment Manifold Absolute Pressure (MAP) Sensors measure intake manifold pressure, and are GM-recommended replacements for your vehicle’s original components. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. These original equipment manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Sends signals to the engine controls for optimal engine performance
Designed to adjust engine performance to various altitudes
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$15.79

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$343.99

Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$27.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$9.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$70.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$118.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$4.99

GM Genuine Parts Fuel Pressure Sensor Covers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$512.99

ACDelco GM Original Equipment Fuel Tank Sending Units are GM-recommended replacements for your vehicle’s original components. These components measure fuel level changes in your vehicle’s fuel tank, which are displayed on the vehicle’s fuel gauge. These original equipment sending units have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Measures fuel level changes displayed on fuel gauge
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$56.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Upgrade your 2012 Cadillac SRX with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2012 Cadillac SRX, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your SRX functioning at its best. At Advance Auto Parts, we offer a wide selection of 81 Fuel and Emissions Systems for the 2012 Cadillac SRX, designed to meet your needs without breaking the bank. From Fuel Injector replacements to Oxygen Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2012 Cadillac SRX at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $4.79 to $567.99, with an average price of $80.01. Our 81 Fuel and Emissions Systems in stock come from 10 trusted brands, so you’re sure to find the right part for your 2012 Cadillac SRX without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Cadillac SRX, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Hitachi Carquest Premium, and more. Hitachi Fuel and Emissions Systems start at just $77.99 and boast an impressive 4.5 stars average rating from customers. With 2,232 customer reviews and counting, our 2012 Cadillac SRX Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Cadillac SRX is always ready to roll. We’re committed to providing you with everything you need to keep your SRX in top shape, all in one place. Start shopping confidently below for your 2012 Cadillac SRX!

Best-Selling Fuel Injectors for 2012 Cadillac SRXes

Enhance the driving experience in your Cadillac with 14 quality Fuel Injector components, starting at $6.29.

show more show less

from

$77.99

Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.

Product Features:

Hitachi is a Tier 1 OE supplier for air flow sensors
100% NEW, never remanufactured
Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
Precision manufactured and assembled sensing elements for accurate air flow measurements

from

$27.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$89.99

CARQUEST MAF sensors are 100% new and are produced by a certified OEM supplier that designs and manufactures new mass air flow sensors

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$136.99

ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$6.29

GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$11.99

GM Genuine Parts Fuel Injection Throttle Body Mounting Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help provide an air-tight seal between the throttle body and the intake manifold, and are GM-recommended replacements for your vehicle’s original components. Replace this gasket whenever you service the throttle body, as leaks can negatively affect the air/fuel ratio and compromise performance. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps prevent excess air form entering the intake
Helps seal the intake and throttle from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$35.99

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$150.46

Mass Air Flow Sensor

from

$129.99

This premium tool kit is designed to ensure the correct installation of the combustion seal on Gasoline Direct Injectors (GDI), which require replacement any time the injector is reinstalled. This special tool allows for the expansion of the combustion seal to allow installation onto the injector’s tip and resizing tools to provide precise dimensioning to ensure proper combustion sealing. Constructed of high-quality stainless steel the tool will provide years of trouble-free service and can be used on over 100 unique styles of GDI injectors.

Product Features:

Includes two expansion cones
Includes two resizing tools
Includes one seal installation collet
Includes hard case
Includes instruction manual

from

$125.99

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$95.99

Product Features:

Each unit is 100% tested to OE specifications
Includes new o-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$93.99

Direct replacement – this fuel injection fuel feed pipe is designed to match the fit and function of the original pipe on specified applications
Restores functionality – reliable replacement for an original part that has failed due to heat or vibration
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$33.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$24.99

Premium OE quality materials.
Services one injector.

Most Popular 2012 Cadillac SRX Oxygen Sensors

Customize your Cadillac with 6 Oxygen Sensors products like Oxygen Sensors and Oxygen Sensor Connectors, all priced under $107.99.

show more show less

from

$92.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$76.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$63.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$83.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$107.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$34.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Top Picks for 2012 Cadillac SRX Air Flow Sensors

Upgrade Cadillac SRXes with top-quality Air Flow Sensors parts, including 5 OEM and aftermarket selections for your 2012 model.

show more show less

from

$38.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$14.49

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

The Ambient Air Temperature Sensor measures outside air temperature and is used by the heating and cooling control system, along with other vehicle cabin sensors, to control temperature and blower speed.
NTK’s Ambient Air Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper reading of outside air temperature.

from

$13.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$63.99

The Premium CarQuest Vehicle Solutions line is designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Relief Valve is used in the automotive air conditioning system to prevent unusual over-pressure that may cause damage to critical components within the system or to the system as a whole. By opening it’s valve when the system pressure exceeds the preset pressure levels and closing when the internal pressure decreases to the preset pressure levels, proper factory designated system pressures are maintained.

Product Features:

Made to OE spec to ensure a proper fit, form and function.
Sensors are engineered for precision performance, durability and a long service life.
All units are tested using advanced end-of-line testing equipment that pressurizes the A/C Pressure Relief Valve and checks functionality to ensure each A/C Pressure Relief Valve meets manufacturing specifications before packaging.

from

$43.99

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:

Bosch OE quality pressure sensors for accurate measurements
Bosch OE quality pressure sensors for long term stability
Bosch OE quality pressure sensors with a short response time
Bosch OE quality pressure sensors with improved media resistance

In-Demand Gas Caps for 2012 Cadillac SRXes

Select from 17 premium Gas Caps parts for your 2012 Cadillac SRX, with prices ranging from $7.99 to $24.99.

show more show less

from

$11.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$22.99

Product Features:

Independently tested for emission control
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.49

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$7.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$17.49

Product Features:

Passes all state and federal emissions tests
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$24.29

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$10.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$11.79

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$18.79

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$10.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Most Sold 2012 Cadillac SRX Fuel Pumps

Explore our best-selling Cadillac parts for the 2012 SRX among 7 OEM and aftermarket options starting from $15.99.

show more show less

from

$254.99

GM Genuine Parts Mechanical Fuel Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These help provide a steady, reliable supply of fuel for your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a steady, reliable supply of fuel for your vehicle’s engine
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$384.99

Demand for Gasoline Direct injection (GDi) technology globally is expected to grow in excess of 10 percent annually through 2026. Delphi uses the latest generation of OE technology for our GDi, and our GDi service program includes the OE parts, tools and know-how to service this fast-growing, high-performance technology. Delphi is a leading Tier 1 supplier of GDi systems to global OEMs. We offer multiple GDi specific training classes, a technician support hotline staffed by ASE certified technicians, and a full line of GDi high-pressure fuel pumps. Learn more about our training programs and tech hotline at 1-877-463-3574.

Product Features:

Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
Meets OE specifications

from

$15.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$567.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$545.99

Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$17.79

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Top-Rated Fuel and Emissions Systems Brands For Your 2012 Cadillac SRX

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2012 Cadillac SRXes. Below you’ll find some of our best rated Fuel and Emissions Systems from Hitachi and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2012 SRX start at just $11.99 and are rated as high as 4.5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Hitachi 2012 Cadillac SRX Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2012 Cadillac SRX, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Hitachi ticks all of those boxes. We offer a wide selection of Hitachi Fuel and Emissions Systems, specifically designed for the 2012 Cadillac SRX. With over 1 Hitachi brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $77.99. Plus, with over 2 customer reviews and an average rating of 4.5 stars, you can trust that our Hitachi Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $77.99

(2)

Air Flow Sensor – New Actual OE Part

“Perfect product. Great customer service”

Popular Carquest Premium 2012 Cadillac SRX Fuel and Emissions Systems

Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2012 Cadillac SRX owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2012 SRX, Advance Auto Parts carries a full inventory of 3 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $11.99 to $22.99, plus, with more than 11 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $22.99

(3)

Locking Flex Fuel Tank Cap

“After spending more money on a locking gas cap that did not work on mt Tundra, I got on line and found a cap from Advance, ordered on line, product wa”

from $16.99

(5)

Fuel Tank Lock Ring LO1582926

“Seems like a nice quality part, installed nice, no complaints.”

from $11.99

(3)

Keyed Alike Locking Fuel Cap

“Worked fine”

FAQs for 2012 Cadillac SRX Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2012 Cadillac SRXes?

Out of 81 Fuel and Emissions Systems that fit 2012 Cadillac SRXes, the following parts are the top sellers:

Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (18730541) – $92.99
Non-Locking Tethered Fuel Tank Cap (12102600) – $24.29

What’s the price range for 2012 Cadillac SRX Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2012 Cadillac SRX start at $4.79 and go up to $567.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2012 Cadillac SRX?

The average price for Fuel and Emissions Systems for the 2012 Cadillac SRX is $80.01. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Cadillac SRX model years?

Yes, we currently carry Fuel and Emissions Systems for 11 model years of Cadillac SRXes between 2004 and 2016. Fuel and Emissions Systems are bought most frequently for the following model years: 2016, 2015, 2014, 2013, 2011, 2010, 2009, 2008, and 2007.

What are the cheapest Fuel and Emissions Systems for my 2012 Cadillac SRX?

The cheapest 2012 Cadillac SRX Fuel and Emissions Systems we carry in stock are:

Fuel Injection Fuel Pressure Relief Valve (12047688) – $4.79
Fuel Tank Pressure Sensor Cover (12111389) – $4.99
Fuel Pressure Relief Valve Cap (12044334) – $6.29
Keyed Alike Locking Fuel Cap (10069213) – $7.99
Non-Locking Flex Fuel Tank Cap (10006751) – $10.49

What types of Fuel and Emissions Systems do you sell for my 2012 Cadillac SRX?

As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2012 Cadillac SRX:

Can I get help with 2012 Cadillac SRX Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Fuel and Emissions Systems and more.

What is your return policy for Cadillac SRX Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Cadillac SRX Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Cadillac SRX Fuel and Emissions Systems

DENSO – Oxygen Sensor: Downstream, 4 Wire, 31.50" Long, Heated, Exact Fit (Part No.234-4338)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1028)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6293)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS068)

Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECA1048)

GM Genuine Parts – Fuel Tank Lock Ring (Right) (Part No.TR26)

GM Genuine Parts – Vapor Canister without Vent Valve Solenoid (Part No.215-709)

Carquest Premium – Non-Locking Flex Fuel Tank Cap (Part No.10834Y)

GM Genuine Parts – Fuel Level Sensor Kit with Seals (Part No.SK1396)

Carquest Premium – Multi-Use Connector (Part No.PTA1268)

Carquest Premium – Remanufactured GDI Fuel Injector (Part No.A511-1083)

GM Genuine Parts – Vapor Canister Vent Solenoid (Part No.214-2312)

Dorman – High Pressure Fuel Line – Feed (Part No.904-050)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Dorman – Fuel Pump Lock Ring (Part No.579-102)

GM Genuine Parts – Flex Fuel Sensor (Part No.13577379)

Carquest Premium – Multi-Use Connector (Part No.PTA1517)

GM Genuine Parts – Fuel Tank Sending Unit O-Ring (Part No.G48)

ACDelco – Manifold Absolute Pressure (MAP) Sensor (Part No.213-796)

Driveworks – Electrical Relay (Part No.83267)

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M2496175)

Felpro – Fuel Injection Plenum Gasket Set (Part No.MS 97241)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)

Carquest Premium – Fuel Pressure Sensor (Part No.FPA1032)

Carquest Premium – Fuel Pressure Sensor (Part No.FPA1022)

GM Genuine Parts – Fuel Tank Pressure Sensor Cover (Part No.20893611)

GM Genuine Parts – Fuel Tank Sending Unit Kit with Seal (Part No.MU1579)

Carquest Premium – Multi-Purpose Relay (Part No.RAA2655)

Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0120)

Felpro – Fuel Injection Plenum Gasket Set (Part No.MS 97241)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6396)

GM Genuine Parts – Direct Fuel Injector Assembly (Part No.12634126)

GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)

GM Genuine Parts – Fuel Injection Throttle Body Mounting Gasket (Part No.12634371)

GM Genuine Parts – Fuel Injector O-Ring Kit with 12 Seals (Part No.12644827)

Delphi – Mass Air Flow Sensor (Part No.AF10682)

Carquest Premium – Premium GDI Seal Tool Kit (Part No.ATK-001)

GM Genuine Parts – Fuel Injector O-Ring Kit with Seals and Spacers (Part No.217-3399)

Carquest Premium – Remanufactured Fuel Injector (Part No.A511-1033)

Dorman – High Pressure Fuel Line – Feed (Part No.904-050)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 73135)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS068)

Bosch – Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (Part No.15733)

GM Genuine Parts – Heated Oxygen Sensor (Part No.12634061)

Bosch – Oxygen Sensor: 4 Wire, 12.2" Long, Heated, Exact Fit (Part No.16454)

NTK – Switching Oxygen Sensor: 4 Wire, 20.5" Long, Heated, Direct Fit (Part No.21556)

DENSO – Oxygen Sensor: 4 Wire, 12.24" Long, Heated, Exact Fit (Part No.234-4815)

Carquest Premium – Multi-Use Connector (Part No.PTA1685)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1028)

NTK – Ambient Air Temperature Sensor (Part No.AN0115)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1034)

Carquest Premium – New MAP SENSOR (Part No.ECE1033)

Bosch – Manifold Absolute Pressure Sensor (Part No.0261230289)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Locking Flex Fuel Tank Cap (Part No.10504Y)

Carquest Premium – Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Tank Cap (Part No.10501)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10819)

Carquest Premium – Locking Fuel Tank Cap (Part No.10591)

Carquest Premium – Locking Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Carquest Premium – Locking Fuel Tank Cap (Part No.10507)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Carquest Premium – Locking Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.17504Y)

Motorad – Non-Locking Tethered Fuel Tank Cap (Part No.MGC817T)

Carquest Premium – Non-Locking Flex Fuel Tank Cap (Part No.10834Y)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Motorad – Non-Locking Tethered Flex Fuel Tank Cap (Part No.MGC617T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17505)

GM Genuine Parts – Fuel Pump (Part No.HPM1029)

Delphi – Direct Injection High Pressure Fuel Pump: With Gasket (Part No.HM10007)

Felpro – Fuel Pump Mounting Gasket Set (Part No.ES 73194)

Delphi – Fuel Pump Module Assembly (Part No.FG1667)

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M2542417)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12427)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12410)