Essential Drivetrains for 2012 BMW M3s

from

$21.75

Input Shaft Seal

from

$16.95

Input Shaft Seal

from

$19.33

Input Shaft Seal

from

$15.49

BEARING

from

$13.99

Drive Shaft-Ctr Support Bearng

from

$78.99

This drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles.
Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.99

SHAFT SEAL

from

$12.58

Pinion Seal

from

$17.86

Pinion Seal

from

$7.00

DIFFERENTIAL DRAIN P

from

$265.85

FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle. The FAG wheel hub assembly is a highly integrated unit with flanges for the brake disc, wheel and knuckle, which allow the highest possible running accuracy. Integrated speed encoders generate the signals required for steering the vehicle (ABS/ESP). The bearing clamping force is applied and controlled by FAG via an orbital formed shoulder.

Product Features:

Original Equipment Quality
Maintenance free
Premium modified bearing steel
Lubricated with specially developed greases
Optimized sealing systems

from

$14.99

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
Formulated to help prevent gear wear and protect against rust and corrosion
Formulated to deliver enhanced protection against deposits
Helps provide better protection during extreme operating conditions

from

$14.49

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$32.99

Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:

HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions

from

$25.99

Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:

Maximizes horsepower
Extends gear and bearing life
Reduces operating temperature
Lower coefficient of friction
Superior corrosion protection
Separates rapidly from water
For use with open, limited-slip and locking differential
Contains limited-slip friction modifier
Made in USA

from

$12.49

HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions

from

$8.28

The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$13.27

The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$13.23

The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$27.27

The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$160.05

The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.

Product Features:

OE quality, fit and performance
High quality rubber
Reinforced with advanced materials
Excellent vibration control

from

$196.99

This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles.
Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$199.99

This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles.
Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$92.53

Restore a smooth ride and easy acceleration with Dorman’s Driveshaft Coupler. Engineered from high-quality rubber for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission or transfer case. Plus, depending on the application, all installation hardware is included for a complete repair.

Product Features:

Direct replacement and direct fit Drive Shaft Couplers available (where applicable) for ease of replacement
Comes with bolts and washers (where applicable)
Easy to install
Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

FAQs for 2012 BMW M3 Drivetrains

Which Drivetrains are best-sellers for 2012 BMW M3s?

Out of 8 Drivetrains that fit 2012 BMW M3s, the following parts are the top sellers:

Center Support Bearing Motor Mount: Center, 1 Piece (11931992) – $83.99
DIFFERENTIAL DRAIN P (11260967) – $7.00
FLEXIBLE COUPLING (50211710) – $196.99

What’s the price range for 2012 BMW M3 Drivetrains?

Drivetrain prices for the 2012 BMW M3 start at $7.00 and go up to $265.85 for the most premium parts.

What’s the average price of a Drivetrain for a 2012 BMW M3?

The average price for Drivetrains for the 2012 BMW M3 is $80.03. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other BMW M3 model years?

Yes, we currently carry Drivetrains for 28 model years of BMW M3s between 1988 and 2024. Drivetrains are bought most frequently for the following model years: 2023, 2022, 2021, 2018, 2017, 2016, 2015, 2013, and 2011.

What are the cheapest Drivetrains for my 2012 BMW M3?

The cheapest 2012 BMW M3 Drivetrains we carry in stock are:

DIFFERENTIAL DRAIN P (11260967) – $7.00
Axle Shaft Nut (10751586) – $13.23
Pinion Seal (12074712) – $17.86
Input Shaft Seal (10787601) – $19.33
DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99

What are the top-rated Drivetrains that fit the 2012 BMW M3?

Out of 17 reviews by customers, our 2012 BMW M3 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2012 BMW M3 and their top-rated products:

Differentials
- DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99

What types of Drivetrains do you sell for my 2012 BMW M3?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 2012 BMW M3:

Can I get help with 2012 BMW M3 Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Drivetrains and more.

What is your return policy for BMW M3 Drivetrains?

Advance Auto Parts keeps returns simple. For new BMW M3 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 BMW M3 Drivetrains

SKF – Input Shaft Seal (Part No.J1156198776SKF)

Timken – Input Shaft Seal (Part No.J1156280261TIM)

Corteco – Input Shaft Seal (Part No.J1156287578CFW)

FAG US – BEARING (Part No.6006-2RSR)

Rein – Drive Shaft-Ctr Support Bearng (Part No.BEM0039P)

Dorman – Driveshaft Center Support Bearing (Part No.934-025)

FAG US – SHAFT SEAL (Part No.SS2835)

Corteco – Pinion Seal (Part No.J7010481273CFW)

SKF – Pinion Seal (Part No.J7010121010SKF)

Original Equipment – DIFFERENTIAL DRAIN P (Part No.J7065433208OEA)

FAG – Wheel Hub Assembly (Part No.K7001265981FAG)

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon (Part No.773732)

Royal Purple – MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (Part No.01301)

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart (Part No.VV820)

Febi – Axle Shaft Nut (Part No.K403026384FEB)

Febi – Axle Shaft Nut (Part No.K4030118037FEB)

Febi – Axle Shaft Nut (Part No.K4030133883FEB)

Febi – Axle Shaft Nut (Part No.K403024787FEB)

Febi – Drive Shaft Flex Joint (Guibo) (Part No.K102077504FEB)

Dorman – FLEXIBLE COUPLING (Part No.935-119)

Dorman – Driveshaft Flex Coupler (Part No.935-182)

Dorman – OE Solutions Driveshaft Flex Joint Coupler (Part No.K1006720047DOR)

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

SKF – Pinion Seal (Part No.J7010121010SKF)

Original Equipment – DIFFERENTIAL DRAIN P (Part No.J7065433208OEA)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6133)

Dorman – FLEXIBLE COUPLING (Part No.935-119)

Febi – Axle Shaft Nut (Part No.K4030133883FEB)

Corteco – Input Shaft Seal (Part No.J1156287578CFW)

FAG – Wheel Hub Assembly (Part No.K7001265981FAG)