2012 BMW 335i Exhaust Parts
Find Your Specific 2012 BMW 335i Exhaust Parts
Below you will find various in-demand BMW Exhaust Parts, components and accessories for your 2012 335i. Advance Auto Parts has popular 335i parts like Catalytic Converters, Exhaust Gaskets, Exhaust System Kits and more. You’ll also find aftermarket and OEM Exhaust Parts for other 335i model years including
2007,
2008,
2009,
2010,
2011,
2013,
2014,
2015 and more. Select a category of 2012 BMW 335i Exhaust Parts below and start saving instantly.
Popular 2012 BMW 335i Exhaust Parts Categories
Essential Exhaust Parts for 2012 BMW 335is
MagnaFlow – OEM Grade Universal Catalytic Converter – 2.50" (Part No.51206)
from
$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.84401)
from
$364.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
MagnaFlow – CALIFORNIA (Part No.557769)
from
$1027.99
CALIFORNIA
MagnaFlow – CALIFORNIA (Part No.557768)
from
$1028.99
CALIFORNIA
MagnaFlow – Direct-Fit OEM Grade Catalytic Converter (Part No.49767)
from
$1051.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49767. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2007-2010 BMW 335i, 2007-2008 BMW 335xi, and more, this direct-fit catalytic converter also interchanges with OE part 18 30 7 553 595. The included gaskets and hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.84205)
from
$206.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
MagnaFlow – Direct-Fit OEM Grade Catalytic Converter (Part No.49768)
from
$765.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49768. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2007-2010 BMW 335i, 2007-2008 BMW 335xi, and more, this direct-fit catalytic converter also interchanges with OE parts 18 30 7 592 448 and 18 30 7 553 824. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
MagnaFlow – California Universal Catalytic Converter – 2.5" (Part No.5551206)
from
$1301.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5551206. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun” Body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun” Body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.84402)
from
$420.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10521-01)
from
$39.49
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Application specific molded rubber construction
- Engineered cross section
- Dana engineering-approved for fit, form and function
Felpro – Exhaust Manifold Gasket Set (Part No.MS 97283)
from
$41.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
aFe POWER – MACH Force-Xp Cat Back Exhaust System: Black Tip, 304 Stainless Steel, Unleashes All Available HP (Part No.49-36328-B)
from
$2789.00
The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.
Product Features:
See More
Product Features:
- 100% TIG-Welded
- Dual High Flow Mufflers
- Uses Factory Mounting Locations
- Street Legal
MagnaFlow – Sport Series Cat-Back Performance Exhaust System (Part No.16542)
from
$1697.99
The MagnaFlow Sport Series Cat-Back Performance Exhaust System 16542 enhances your 3.0L 2007-2010 BMW with an aggressive character that is sure to help you stand out from the other BMW you encounter on the street. With its 2.5in. diameter fast-flowing mandrel bent main piping that passes through 2 Straight-Through mufflers before ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this dyno-proven BMW exhaust system refuses to be ignored. As such, 16542 is tuned to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels, so please check to ensure compliance with local noise regulations. The system’s cat-back design replaces all your import’s stock exhaust components from the catalytic converter on back. Extensive 3D scanning and CNC precision robotic manufacturing techniques are used to ensure that your exhaust system fits perfectly with just a simple do-it-yourself installation process. The durable, corrosion resistant stainless steel construction of 16542 is backed by MagnaFlow’s limited lifetime warranty.
Product Features:
See More
Product Features:
- High-performance lightweight design
- Dyno-proven performance
- Racing inspired sound
aFe POWER – MACH Force-Xp Axel Back Exhaust System: Black Tip, 304 Stainless Steel, Unleashes All Available HP (Part No.49-36336-B)
from
$2376.00
Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation; This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Dual 4″ Gloss Black Tips; Finishing off this system are dual 4″ diameter, gloss black, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 3″ to 2-1/2″ mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.
Product Features:
See More
Product Features:
- 100% Hand TIG-Welded 304 Stainless Steel Tubing
- Factory Style Exhaust Valve
- Utilizes High Flow Transverse Muffler
- Dual Gloss Black 304 Stainless Steel Tips
BRExhaust – Direct-Fit Exhaust System Replacement Kit (Part No.106-0911)
from
$863.99
Direct-Fit Exhaust System Replacement Kit
aFe POWER – MACH Force-Xp Axel Back Exhaust System: Polished Tip, 304 Stainless Steel, Unleashes All Avail. HP (Part No.49-36336-P)
from
$2159.00
Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation; This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Dual 4″ Polished Tips; Finishing off this system are dual 4″ diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 3″ to 2-1/2″ mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.
Product Features:
See More
Product Features:
- 100% Hand TIG-Welded 304 Stainless Steel Tubing
- Factory Style Exhaust Valve
- Utilizes High Flow Transverse Muffler
- Dual Polished 304 Stainless Steel Tips
Upgrade your 2012 BMW 335i with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2012 BMW 335i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Exhaust Parts are key to keeping your 335i functioning at its best. At Advance Auto Parts, we offer a wide selection of 5 Exhaust Parts for the 2012 BMW 335i, designed to meet your needs without breaking the bank.
From
Catalytic Converter
replacements to
Exhaust Gaskets
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2012 BMW 335i at great prices.
Our Exhaust Parts inventory for this model
ranges from just $39.49 to $2,789.00, with
an average price of $1,512.30.
Our 5 Exhaust Parts in stock come from 3 trusted brands, so you’re sure to find the right part for your 2012 BMW 335i without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 BMW 335i, we stock popular OEM and aftermarket Exhaust Parts from top names
like Walker, and more.
Walker Exhaust Parts
start at just $197.99 and boast an impressive 4.2 stars average rating from customers.
With 13 customer reviews and counting, our 2012 BMW 335i Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2012 BMW 335i is always ready to roll. We’re committed to providing you with everything you need to keep your 335i in top shape, all in one place.
Start shopping confidently below for your 2012 BMW 335i!
Best-Selling Catalytic Converters for 2012 BMW 335is
Enhance the driving experience in your BMW with 1 quality Catalytic Converter components, starting at $197.99.
Walker – Ultra EPA Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.93252)
from
$197.99
Product Features:
See More
- EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
Most Popular 2012 BMW 335i Exhaust Gaskets
Customize your BMW with 1 Exhaust Gaskets products
like Exhaust Manifold Gaskets, all
priced under $39.49.
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10521-01)
from
$39.49
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Application specific molded rubber construction
- Engineered cross section
- Dana engineering-approved for fit, form and function
Top Picks for 2012 BMW 335i Exhaust System Kits
Upgrade BMW 335is with top-quality Exhaust System Kits parts, including 3 OEM and aftermarket selections for your 2012 model.
aFe POWER – MACH Force-Xp Cat Back Exhaust System: Black Tip, 304 Stainless Steel, Unleashes All Available HP (Part No.49-36328-B)
from
$2789.00
The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.
Product Features:
See More
Product Features:
- 100% TIG-Welded
- Dual High Flow Mufflers
- Uses Factory Mounting Locations
- Street Legal
aFe POWER – MACH Force-Xp Axel Back Exhaust System: Black Tip, 304 Stainless Steel, Unleashes All Available HP (Part No.49-36336-B)
from
$2376.00
Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation; This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Dual 4″ Gloss Black Tips; Finishing off this system are dual 4″ diameter, gloss black, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 3″ to 2-1/2″ mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.
Product Features:
See More
Product Features:
- 100% Hand TIG-Welded 304 Stainless Steel Tubing
- Factory Style Exhaust Valve
- Utilizes High Flow Transverse Muffler
- Dual Gloss Black 304 Stainless Steel Tips
aFe POWER – MACH Force-Xp Axel Back Exhaust System: Polished Tip, 304 Stainless Steel, Unleashes All Avail. HP (Part No.49-36336-P)
from
$2159.00
Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation; This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Dual 4″ Polished Tips; Finishing off this system are dual 4″ diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 3″ to 2-1/2″ mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.
Product Features:
See More
Product Features:
- 100% Hand TIG-Welded 304 Stainless Steel Tubing
- Factory Style Exhaust Valve
- Utilizes High Flow Transverse Muffler
- Dual Polished 304 Stainless Steel Tips
Top-Rated Exhaust Parts Brands For Your 2012 BMW 335i
Shop for the best-rated brands offering Exhaust Parts and other products for your 2012 BMW 335is. Below you’ll find some of our best rated Exhaust Parts from Walker, and more. Exhaust Parts from these brands that fit a 2012 335i start at just $197.99 and are rated as high as 4.2 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Walker 2012 BMW 335i Exhaust Parts
When it comes to maintaining or upgrading your 2012 BMW 335i, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Walker ticks all of those boxes. We offer a wide selection of Walker Exhaust Parts, specifically designed for the 2012 BMW 335i. With over 1 Walker brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $197.99. Plus, with over 13 customer reviews and an average rating of 4.2 stars, you can trust that our Walker Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$197.99
(13)
Ultra EPA Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID)
“My son had a bad cat converter back in July 2017. So, I purchased one from a online parts store for $189. This included the pipes. Then first of Nove”
FAQs for 2012 BMW 335i Exhaust Parts
Which Exhaust Parts are best-sellers for 2012 BMW 335is?
Out of 5 Exhaust Parts that fit 2012 BMW 335is, the following parts are the top sellers:
- MACH Force-Xp Axel Back Exhaust System: Black Tip, 304 Stainless Steel, Unleashes All Available HP (12265725) – $2,376.00
- MACH Force-Xp Axel Back Exhaust System: Polished Tip, 304 Stainless Steel, Unleashes All Avail. HP (12265613) – $2,159.00
- MACH Force-Xp Cat Back Exhaust System: Black Tip, 304 Stainless Steel, Unleashes All Available HP (12266140) – $2,789.00
What’s the price range for 2012 BMW 335i Exhaust Parts?
Exhaust Part prices for the 2012 BMW 335i start at $39.49 and go up to $2,789.00 for the most premium parts.
What’s the average price of a Exhaust Part for a 2012 BMW 335i?
The average price for Exhaust Parts for the 2012 BMW 335i is $1,512.30. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other BMW 335i model years?
What are the cheapest Exhaust Parts for my 2012 BMW 335i?
The cheapest 2012 BMW 335i Exhaust Parts we carry in stock are:
- Exhaust Manifold Gasket Set (12547729) – $39.49
- Ultra EPA Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID) (20200241) – $197.99
- MACH Force-Xp Axel Back Exhaust System: Polished Tip, 304 Stainless Steel, Unleashes All Avail. HP (12265613) – $2,159.00
- MACH Force-Xp Axel Back Exhaust System: Black Tip, 304 Stainless Steel, Unleashes All Available HP (12265725) – $2,376.00
- MACH Force-Xp Cat Back Exhaust System: Black Tip, 304 Stainless Steel, Unleashes All Available HP (12266140) – $2,789.00
What are the top-rated Exhaust Parts that fit the 2012 BMW 335i?
Out of 13 reviews by customers, our 2012 BMW 335i Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2012 BMW 335i and their top-rated products:
- Catalytic Converters
- Ultra EPA Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID) (20200241) – $197.99
What types of Exhaust Parts do you sell for my 2012 BMW 335i?
As of 11/2/25, these are some of the most in-demand types of Exhaust Parts for a 2012 BMW 335i:
Can I get help with 2012 BMW 335i Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Exhaust Parts and more.
What is your return policy for BMW 335i Exhaust Parts?
Advance Auto Parts keeps returns simple. For new BMW 335i Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
