2012 Audi S5 Fuel and Emissions Systems
More 2012 Audi S5 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2012 Audi S5, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2012 Audi S5 Fuel and Emissions Systems
Carquest Premium – Injector Seal Kit (Part No.AS060)
from
$21.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
Original Equipment – Original Equipment Fuel Pressure Sensor (Part No.C3001402075OEA)
from
$68.08
The Original Equipment Fuel Pressure Sensor is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- Built-in circuit protection to ensure your electronics and computer systems stay unharmed
- High reliability of pressure sensing proved in gasoline and diesel direct injection systems
- Sturdy design, vibration resistant and thermal stability
Bosch – Boost Pressure Sensor (Part No.C7044397109BOS)
from
$59.41
All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.
Product Features:
See More
Product Features:
- Built-in circuit protection to ensure your electronics and computer systems stay unharmed
- High reliability of pressure sensing proved in gasoline and diesel direct injection systems
- Sturdy design, vibration resistant and thermal stability
Elring – Fuel Injector O-Ring (Part No.C101262400ELR)
from
$1.07
Fuel Injector O-Ring
Spectra Premium – Fuel Tank Strap (Part No.ST404)
from
$179.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
- Direct fit ensures safe, secure fuel tank installation
- Product individually packaged and labeled to help reduce product damage prior to installation
- Industry leading coverage on straps for plastic tanks
- Manufactured with double-layered steel on the mounting brackets for a more robust solution
Carquest Premium – Vapor Canister (Part No.CPN2329)
from
$384.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Mechanical Vacuum Pump (Part No.904-829)
from
$374.99
This vacuum pump matches the fit and function of the original equipment pump. Made of durable materials for reliable service, this replacement pump is built to ensure reliable operation of vacuum-operated vehicle functions.
Product Features:
See More
Product Features:
- Ideal replacement – this vacuum pump matches the fit and function of the original equipment pump to restore operation of vacuum-operated functions
- Durable construction – this vacuum pump is made of quality materials to ensure reliable performance and a long service life
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on testing to ensure a quality fit
Delphi – Direct Injection High Pressure Fuel Pump: Without Gasket/Seal or Wiring Harness (Part No.HM10050)
from
$462.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
- Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
- Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
- Meets OE specifications
Bosch – Boost Pressure Sensor (Part No.C7044419095BOS)
from
$52.73
All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.
Product Features:
See More
Product Features:
- Built-in circuit protection to ensure your electronics and computer systems stay unharmed
- High reliability of pressure sensing proved in gasoline and diesel direct injection systems
- Sturdy design, vibration resistant and thermal stability
Bosch – Wideband Oxygen Sensor: 5 Wire, 257.87" Long, Heated, Exact Fit (Part No.18132)
from
$180.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Advanced Wideband sensing element for exact air/fuel measurement
- Robust sensor design increases sensor longevity
- Seared protection tube due to 100% functional quality test
- ‘True Direct-fit’ OE connectors and harness
- Pre-coated threads with anti-seize compound right out of the box
Delphi – Fuel Pump Module Assembly: With Float Arm (Part No.FG1194)
from
$500.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Vaico – Vaico Breather Hose (Part No.B2010265917VCO)
from
$139.02
The Vaico Breather Hose is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Pierburg – Secondary Air Pump (Part No.B60102515448APG)
from
$707.43
Pierburg a global supplier to European automakers manufactures an OE-equivalent direct fit Air Pump that maintains the quality and performance of the Original Equipment it replaces. Pierburg designed a modular system of brackets, and vibration absorbing elements to ensure that the secondary air pump does not interact with its mounting location.
Product Features:
See More
Product Features:
- OE design
- Low noise
- Long working life
- High thermal and mechanical resistance
- Sealed bearing design
- Housing sealed to protect against contamination
- High output DC motor
- Exact OE Body and engine mounting
Bosch – Fuel Tank Sending Unit (Part No.E2030848445BOS)
from
$75.99
The Bosch Fuel Tank Sending Unit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications for fit, form, and function
Dorman – Secondary Air Injection Check Valve (Part No.911-989)
from
$272.99
This secondary air injection check valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this secondary air injection check valve is designed to match the fit and function of the original valve on specified vehicles
- Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.EGA1181)
from
$49.99
The Secondary Air Injection system is an emission control device designed to pump fresh air into the engine exhaust system to reduce harmful emissions and convert the emission into harmless water vapor via a chemical reaction. These systems were used heavily in the pre-catalytic converter emission control period but found some application in vehicles with catalytic converter systems.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
INA – Fuel Pump Tappet (Part No.E3013418177INA)
from
$36.95
Fuel Pump Tappet
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1081)
from
$48.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 15.8" Long, Heated, Direct Fit (Part No.24327)
from
$146.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 11.46" Long, Heated, Exact Fit (Part No.234-5110)
from
$172.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Dorman – Evaporative Emissions Purge Solenoid Valve (Part No.911-800)
from
$52.99
Engineered for a perfect fit and plug-and-play installation, this vapor canister purge valve is a direct replacement for the original equipment purge valve. It is critical to the evaporative emissions system and fulfills government requirements.
Product Features:
See More
Product Features:
- Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment quality at a lower price
- Quality tested – has undergone testing to ensure proper fit and performance
Carquest Premium – Fuel Cap Tester Adapter (Part No.12426)
from
$43.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Popular 2012 Audi S5 Fuel and Emissions Systems Categories
2012 Audi S5 Fuel and Emissions Systems
You count on your 2012 Audi S5 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 67 Fuel and Emissions Systems ranging in price from $1.07 to $707.43, you’re sure to find everything you need for your 2012 Audi S5.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 18 different brands like Felpro, Bosch, and Carquest Premium. 2012 Audi S5 Fuel and Emissions Systems start as low as $1.07!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 373 extensive product reviews on 2012 Audi S5 Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2012 Audi S5 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 2012 Audi S5
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2012 Audi S5 running right for years to come. In our inventory you’ll find brands like Felpro, Bosch, Carquest Premium, and even more.
Popular Dorman Fuel and Emissions Systems
You’ll find popular Dorman brand products across Vapor Canister Purge Valves. All are waiting to get your 2012 Audi S5 back on the road. Some of the top-rated Dorman products in these categories are:
Top-Rated Bosch Fuel and Emissions Systems
If Bosch are what you’re looking for, our inventory holds plenty. We stock Bosch brand Fuel and Emissions Systems for your 2012 Audi S5, and some of our most reviewed Bosch parts include:
FAQs for 2012 Audi S5 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2012 Audi S5?
Out of 67 Fuel and Emissions Systems for the 2012 Audi S5, the most popular in our inventory are:
