2011 Volkswagen Jetta Brake Boosters
More 2011 Volkswagen Jetta Brake Boosters
Find your specific 2011 Volkswagen Jetta original or aftermarket Brake Boosters below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2011 Volkswagen Jetta Brake Boosters
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5778)
from
$120.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
ATE – Pneumatic Brake Booster (Part No.N4000152612ATE)
from
$310.86
ATE supplies brake boosters in single or tandem versions and in all desired sizes and is one of the world’s leading OE suppliers of brake control and brake assist systems. The tie rod version, which is available for all designs, provides further weight reduction and additional optimized elongation characteristics. Front-bolt concepts on a tie-rod basis facilitate installation. Electric and mechanical brake assist systems, sensors for OHB, ACC, ESC, etc., as well as measures designed to optimize crash behavior complete the product portfolio. Brake assist systems are an important aid in emergency braking situations in which a driver needs to respond to an emergency situation, but does not apply the brakes with sufficient pressure. The brake assist recognizes the brake application speed to detect this type of panic situation, and activates the brake booster or the EBS hydraulic unit. Maximum braking is thus achieved although the force on the brake pedal is low – the shorter braking distance can even be life-saving.
Product Features:
See More
Product Features:
- Original equipment (OE) quality
- Wide range of single and tandem Brake Boosters
- Unique tie-rod design meaning lighter and thinner parts for more efficient performance
- Most units are made of steel, but lightweight aluminium versions are also available.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2651)
from
$187.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
ATE – Pneumatic Brake Booster (Part No.N4000462836ATE)
from
$381.69
ATE supplies brake boosters in single or tandem versions and in all desired sizes and is one of the world’s leading OE suppliers of brake control and brake assist systems. The tie rod version, which is available for all designs, provides further weight reduction and additional optimized elongation characteristics. Front-bolt concepts on a tie-rod basis facilitate installation. Electric and mechanical brake assist systems, sensors for OHB, ACC, ESC, etc., as well as measures designed to optimize crash behavior complete the product portfolio. Brake assist systems are an important aid in emergency braking situations in which a driver needs to respond to an emergency situation, but does not apply the brakes with sufficient pressure. The brake assist recognizes the brake application speed to detect this type of panic situation, and activates the brake booster or the EBS hydraulic unit. Maximum braking is thus achieved although the force on the brake pedal is low – the shorter braking distance can even be life-saving.
Product Features:
See More
Product Features:
- Original equipment (OE) quality
- Wide range of single and tandem Brake Boosters
- Unique tie-rod design meaning lighter and thinner parts for more efficient performance
- Most units are made of steel, but lightweight aluminium versions are also available.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2683)
from
$122.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2653)
from
$189.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
ATE – Pneumatic Brake Booster (Part No.N4000152326ATE)
from
$333.39
ATE supplies brake boosters in single or tandem versions and in all desired sizes and is one of the world’s leading OE suppliers of brake control and brake assist systems. The tie rod version, which is available for all designs, provides further weight reduction and additional optimized elongation characteristics. Front-bolt concepts on a tie-rod basis facilitate installation. Electric and mechanical brake assist systems, sensors for OHB, ACC, ESC, etc., as well as measures designed to optimize crash behavior complete the product portfolio. Brake assist systems are an important aid in emergency braking situations in which a driver needs to respond to an emergency situation, but does not apply the brakes with sufficient pressure. The brake assist recognizes the brake application speed to detect this type of panic situation, and activates the brake booster or the EBS hydraulic unit. Maximum braking is thus achieved although the force on the brake pedal is low – the shorter braking distance can even be life-saving.
Product Features:
See More
Product Features:
- Original equipment (OE) quality
- Wide range of single and tandem Brake Boosters
- Unique tie-rod design meaning lighter and thinner parts for more efficient performance
- Most units are made of steel, but lightweight aluminium versions are also available.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5717)
from
$125.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2681)
from
$118.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Cardone New – Vacuum Brake Booster: Without Master Cylinder (Part No.5C-32651)
from
$286.99
CARDONE New Vacuum Brake Boosters, Hydro-Vac Boosters, and Hydraulic Boosters are back by CARDONE New Engineering. CARDONE New Engineering is based off 40 years of CARDONE engineering expertise, where original design weaknesses are identified, corrected and where applicable upgraded to provide a more durable part then the original unit. Every unit is 100% new and manufactured to meet or exceed OEM performance, providing a quality product both you and your vehicle rely on.
Product Features:
See More
Product Features:
- A premium finish is applied on every unit for superior corrosion protection.
- Each unit is 100% vacuum and pressure tested to ensure reliable performance.
- Pedal rods are 100% functionally tested to ensure proper operation.
- Guaranteed fit and function.
- Guaranteed fit and function.
- Meets or exceeds O.E.M. performance.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5700)
from
$127.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
ATE – Pneumatic Brake Booster (Part No.N4000152611ATE)
from
$357.95
ATE supplies brake boosters in single or tandem versions and in all desired sizes and is one of the world’s leading OE suppliers of brake control and brake assist systems. The tie rod version, which is available for all designs, provides further weight reduction and additional optimized elongation characteristics. Front-bolt concepts on a tie-rod basis facilitate installation. Electric and mechanical brake assist systems, sensors for OHB, ACC, ESC, etc., as well as measures designed to optimize crash behavior complete the product portfolio. Brake assist systems are an important aid in emergency braking situations in which a driver needs to respond to an emergency situation, but does not apply the brakes with sufficient pressure. The brake assist recognizes the brake application speed to detect this type of panic situation, and activates the brake booster or the EBS hydraulic unit. Maximum braking is thus achieved although the force on the brake pedal is low – the shorter braking distance can even be life-saving.
Product Features:
See More
Product Features:
- Original equipment (OE) quality
- Wide range of single and tandem Brake Boosters
- Unique tie-rod design meaning lighter and thinner parts for more efficient performance
- Most units are made of steel, but lightweight aluminium versions are also available.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5730)
from
$83.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Pierburg – Brake Vacuum Pump (Part No.N4050247222APG)
from
$253.03
Brake Vacuum Pump
Rein – Brake Vacuum Pump with Gasket (Part No.BVP0061)
from
$294.99
Rein OE Manufactured Brake Vacuum Pumps are produced in an OE factory to the specifications of the auto maker’s engineers! These brake vacuum pumps come complete with a mounting gasket or seal, depending on the application. Vacuum pumps are used in vehicles with engines that do not produce sufficient vacuum to provide power to the braking system, EGR valves, intake manifold switches, as well as turbocharger actuators and others. A failed or improperly working brake vacuum pump can lead to a reduction in braking power, a reduction in part and/or full load performance, a triggering of check engine light or limp mode, or engine misfires. All Rein brake vacuum pumps are manufactured by an OE manufacturer and are the exact same units that originally came on the vehicle!
Product Features:
See More
Product Features:
- Ensures the proper operation of vehicle’s braking as well as all other vacuum dependent systems
- Engineered and manufactured by an OE manufacturer
- Plug and play replacement for original vacuum pump
- Applicable gasket included
Rein – Brake Vacuum Pump with Seal (Part No.BVP0066)
from
$279.99
Rein OE Manufactured Brake Vacuum Pumps are produced in an OE factory to the specifications of the auto maker’s engineers! These brake vacuum pumps come complete with a mounting gasket or seal, depending on the application. Vacuum pumps are used in vehicles with engines that do not produce sufficient vacuum to provide power to the braking system, EGR valves, intake manifold switches, as well as turbocharger actuators and others. A failed or improperly working brake vacuum pump can lead to a reduction in braking power, a reduction in part and/or full load performance, a triggering of check engine light or limp mode, or engine misfires. All Rein brake vacuum pumps are manufactured by an OE manufacturer and are the exact same units that originally came on the vehicle!
Product Features:
See More
Product Features:
- Ensures the proper operation of vehicle’s braking as well as all other vacuum dependent systems
- Engineered and manufactured by an OE manufacturer
- Plug and play replacement for original vacuum pump
- Applicable seal included
Pierburg – Vacuum Pump (Part No.B7250446855APG)
from
$317.95
Vacuum Pump
Popular 2011 Volkswagen Jetta Brake Boosters Categories
2011 Volkswagen Jetta Brake Boosters
Maybe you’re in the middle of a full rebuild of that 2011 Volkswagen Jetta. Maybe you just need a couple of Brake Boosters. Either way, Advance Auto Parts has 3 different Brake Boosters in our inventory ranging from $189.99 to $381.69. That means you can find the exact parts or products you need to keep that 2011 Volkswagen Jetta running smoothly.
Brake Boosters are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Volkswagen Jetta. Wearever, Rein, and ATE are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Brake Boosters for your 2011 Volkswagen Jetta, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Brake Boosters to keep your 2011 Volkswagen Jetta rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Brake Boosters Brands To Make Your 2011 Volkswagen Jetta Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Volkswagen Jetta demands trusted brand parts and products to keep it running. Many trusted brands of Brake Boosters make up Advance Auto Parts’ inventory, and all are ready to help make your Jetta the best it can be. Be sure to browse some of our top Brake Boosters brands and parts.
FAQs for 2011 Volkswagen Jetta Brake Boosters
What are the most purchased Brake Boosters for the 2011 Volkswagen Jetta?
Out of 3 Brake Boosters for the 2011 Volkswagen Jetta, the most popular in our inventory are:
from
$189.99
This product is not rated
Vacuum Brake Booster: Without Master Cylinder
Power Brake Boosters
from
$294.99
This product is not rated
Brake Vacuum Pump with Gasket
Power Brake Booster Vacuum Pumps
