2011 Toyota Venza Body Parts

Below you will find various in-demand Toyota Body Parts, components and accessories for your 2011 Venza. Advance Auto Parts has popular Venza parts like Vehicle Hoods, Bodies and Fender Parts, Vehicle Windows and more. You’ll also find aftermarket and OEM Body Parts for other Venza model years including 2009, 2010, 2012, 2013, 2014, 2015, 2021, 2022, 2023 and more. Select a category of 2011 Toyota Venza Body Parts below and start saving instantly.

Popular 2011 Toyota Venza Body Parts Categories

Door Hinge Pin Kits

Window Regulators

Tailgate Lock Actuators

Power Window Switches

Exterior Door Handles

Interior Door Handles

Door Hinges

Bumper Cover Reinforcements

Bumper Pad Retainer Strips

Bumper Impact Absorbers

Mirror Replacement Glass

Door Jamb Switches

Bumper Cover Reflectors

Bumper Cover Trim Panel Retainers

Body Side Molding Clips

Essential Body Parts for 2011 Toyota Venzas

from

$45.99

New CAPA Certified NSF Certified Premium Replacement Front Bumper Impact Absorber

Product Features:

Made Of Expanded Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$461.99

This door window switch is designed to match the fit, function and performance of the factory switch on specified vehicles. It is engineered to help restore window switch functionality to original equipment standards when the factory part is missing, broken, or has failed from internal electrical or mechanical component damage.

Product Features:

Direct replacement – this door window switch is designed to match the fit, function and performance of the factory switch on specified vehicles
Ideal solution – engineered to help restore window switch functionality to original equipment standards when the factory part is missing, broken, or has failed from internal component damage
Restores appearance – manufactured to precise specifications for a seamless installation and fit that complements the vehicle interior
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$403.99

The rear liftgate found on many vehicles typically has control features that allow the vehicle operator to control those features from the front passenger compartment. Liftgate and window actuators are controlled by release switches for operator convenience.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$233.99

New CAPA Certified Premium Replacement Front Bumper Cover Reinforcement Bar, For USA Built Models

Product Features:

For USA Built Models, Made Of Ultra-High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$0.69

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$119.99

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new CAPA certified standard replacement front lower grille, for use without camera, with park assist sensor holes, with tow hook holes, black, for limited and xle models. It is designed to replace your existing grille. Check to be sure it fits your vehicle.

Product Features:

For Use Without Camera, With Park Assist Sensor Holes And Tow Hook Holes, Black, For Limited And XLE Models, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: Limited
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$57.99

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$99.99

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
Mirror glass is power adjustable
OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
Manual folding for additional clearance
Textured Black with Paintable to match cover

from

$43.49

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$26.99

This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$17.79

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. Vehicle switches provide versatile control for various electrical functions within the vehicle, enhancing convenience and safety by allowing drivers to easily operate features such as lights, wipers, and accessories with a simple flick or press. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$80.99

New CAPA Certified Standard Replacement Driver Side Fender Liner, Up To Production Date 01/2012

Product Features:

Up To Production Date 01/2012, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$312.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$18.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Front Bumper Grille, Matte-Black. It is Designed to Replace Your Existing Bumper Cover Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Matte-Black, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$70.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$59.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$636.99

New CAPA Certified Premium Replacement Hood Panel, Made Of High Strength Steel

Product Features:

Made Of High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$161.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$253.99

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new standard replacement passenger side power door mirror, without camera, paint to match, for le and xle models. It is designed to replace your existing passenger side door mirror. Check to be sure it fits your vehicle.

Product Features:

Without Camera, For LE And XLE Models, Paint To Match, Madee Of ABS Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: Limited
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$39.99

This door hinge is designed to match the function of an original equipment hinge on specified vehicles. It is engineered to securely connect a door and door frame to help restore proper door operation and replace a rusted, failed, or damaged hinge.

Product Features:

Direct replacement – this door hinge is designed to match the fit, function and performance of an original equipment hinge on specified vehicles
Ideal solution – engineered to securely connect a door and door frame to help restore proper door operation, and seamlessly replace a rusted, failed, or damaged hinge
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$31.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Passenger Side Rear Bumper Cover Reflector, Sienna Except SE Model. It is Designed to Replace Your Existing Bmp Cover Reflector. Check To Be Sure it Fits Your Vehicle.

Product Features:

Excludes Sienna SE Model
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$30.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Driver Side Rear Bumper Cover Reflector, Sienna Except SE Model. It is Designed to Replace Your Existing Bmp Cover Reflector. Check To Be Sure it Fits Your Vehicle.

Product Features:

Excludes Sienna SE Model
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Upgrade your 2011 Toyota Venza with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2011 Toyota Venza, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Body Parts are key to keeping your Venza functioning at its best. At Advance Auto Parts, we offer a wide selection of 56 Body Parts for the 2011 Toyota Venza, designed to meet your needs without breaking the bank. From Vehicle Hood replacements to Bodies and Fender Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2011 Toyota Venza at great prices. Our Body Parts inventory for this model ranges from just $0.69 to $636.99, with an average price of $109.93. Our 56 Body Parts in stock come from 7 trusted brands, so you’re sure to find the right part for your 2011 Toyota Venza without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Toyota Venza, we stock popular OEM and aftermarket Body Parts from top names like Dorman, and more. Dorman Body Parts start at just $4.99 and boast an impressive 4.2 stars average rating from customers. With 4 customer reviews and counting, our 2011 Toyota Venza Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Toyota Venza is always ready to roll. We’re committed to providing you with everything you need to keep your Venza in top shape, all in one place. Start shopping confidently below for your 2011 Toyota Venza!

Best-Selling Vehicle Hoods for 2011 Toyota Venzas

Enhance the driving experience in your Toyota with 6 quality Vehicle Hood components, starting at $0.69.

show more show less

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$38.99

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

Engineered to meet or exceed OE specifications. Always replace in Pairs, where applicable.
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance.
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function.
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable.
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal.
Trilingual Install Instructions provided inside each package

from

$636.99

New CAPA Certified Premium Replacement Hood Panel, Made Of High Strength Steel

Product Features:

Made Of High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$57.99

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$0.69

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

Top Picks for 2011 Toyota Venza Vehicle Windows

Upgrade Toyota Venzas with top-quality Vehicle Windows parts, including 2 OEM and aftermarket selections for your 2011 model.

show more show less

from

$70.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$69.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

In-Demand Vehicle Latches and Handles for 2011 Toyota Venzas

Select from 10 premium Vehicle Latches and Handles parts for your 2011 Toyota Venza, with prices ranging from $42.99 to $164.99.

show more show less

from

$81.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$164.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$84.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$85.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$82.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$161.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$161.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$49.99

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$43.49

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$42.99

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Most Sold 2011 Toyota Venza Vehicle Doors

Explore our best-selling Toyota parts for the 2011 Venza among 9 OEM and aftermarket options starting from $16.49.

show more show less

from

$16.49

Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$312.99

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$278.99

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$232.99

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$39.99

Direct replacement – this door hinge is designed to match the fit, function and performance of an original equipment hinge on specified vehicles
Ideal solution – engineered to securely connect a door and door frame to help restore proper door operation, and seamlessly replace a rusted, failed, or damaged hinge
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$299.99

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$26.99

Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$161.99

The Door Lock Actuator is typically an electrical driven device that will remotely operate the vehicles door locks. The actuator may be controlled by a switch inside the vehicle but may also be operated by a controller allowing the vehicle operator to unlock the doors without touching the vehicle using a key fob device.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$17.79

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Top-Rated Body Parts Brands For Your 2011 Toyota Venza

Shop for the best-rated brands offering Body Parts and other products for your 2011 Toyota Venzas. Below you’ll find some of our best rated Body Parts from Dorman, and more. Body Parts from these brands that fit a 2011 Venza start at just $4.99 and are rated as high as 4.2 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 2011 Toyota Venza Body Parts

When it comes to maintaining or upgrading your 2011 Toyota Venza, using quality Body Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Body Parts, specifically designed for the 2011 Toyota Venza. With over 2 Dorman brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.99, with an average price of just $10.74. Plus, with over 2 customer reviews and an average rating of 4.2 stars, you can trust that our Dorman Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $16.49

(1)

Door Hinge Pin and Bushing Kit

“Works great, door shuts like it was intended to again”

from $4.99

(1)

Toyota Bumper Retainer

“I needed 3 retainers for a molding in the engine compartment, correct size, works great.”

FAQs for 2011 Toyota Venza Body Parts

Which Body Parts are best-sellers for 2011 Toyota Venzas?

Out of 56 Body Parts that fit 2011 Toyota Venzas, the following parts are the top sellers:

Toyota Hood Insulation Retainer (11910659) – $4.99
Toyota Molding Retainer (11910687) – $4.99
Integrated Latch Actuator (10098746) – $312.99

What’s the price range for 2011 Toyota Venza Body Parts?

Body Part prices for the 2011 Toyota Venza start at $0.69 and go up to $636.99 for the most premium parts.

What’s the average price of a Body Part for a 2011 Toyota Venza?

The average price for Body Parts for the 2011 Toyota Venza is $109.93. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Toyota Venza model years?

Yes, we currently carry Body Parts for 9 model years of Toyota Venzas between 2009 and 2024. Body Parts are bought most frequently for the following model years: 2022, 2021, 2015, 2014, 2013, 2012, 2010, 2009, and 2023.

What are the cheapest Body Parts for my 2011 Toyota Venza?

The cheapest 2011 Toyota Venza Body Parts we carry in stock are:

Hood Insulator Clip – Toyota (sold by each) (11224226) – $0.69
Moulding Retainer Head Dia 1.01 X 0.51 In Shank Lng 0.92 In Hole Dia 0.39 In (11077107) – $4.29
Toyota Hood Insulation Retainer (11910659) – $4.99
Toyota Molding Retainer (11910687) – $4.99
Toyota Bumper Retainer (11910645) – $4.99

What types of Body Parts do you sell for my 2011 Toyota Venza?

As of 11/2/25, these are some of the most in-demand types of Body Parts for a 2011 Toyota Venza:

Can I get help with 2011 Toyota Venza Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Body Parts and more.

What is your return policy for Toyota Venza Body Parts?

Advance Auto Parts keeps returns simple. For new Toyota Venza Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2011 Toyota Venza Body Parts

KAI – Bumper Impact Absorber (Part No.TO1070161C)

Dorman – Master Window Switch (Part No.901-745)

Carquest Premium – Liftgate Actuator (Part No.YBN1003)

Dorman – Fender Retainer-Interior-Toyota (Part No.963-509)

KAI – Bumper Cover Reinforcement (Part No.TO1006207DSC)

Dorman – Hood Insulator Clip – Toyota (sold by each) (Part No.700-669)

KAI – New CAPA Certified Standard Replacement Lower Grille (Part No.TO1036244C)

StrongArm – Liftgate Lift Support: 19.78" Ext Length, 7.25" Travel, 137 Lbs of Force, 1 Pk (Part No.D6680)

Dorman – Toyota Molding Retainer (Part No.963-533D)

K-Source – Mirror Assembly: Driver Side, Power Adjustment, Foldable, 1 Pk (Part No.70640T)

Dorman – Help – Interior Door Handle or Chrome Lever Brown Knob (Part No.91371)

Dorman – Help – Door Hinge Pin and Bushing Kit (Part No.38471)

Carquest Premium – Door Jamb Switch (Part No.DJA1004)

KAI – Fender Liner (Part No.TO1248157C)

Dorman – Toyota Bumper Retainer (Part No.963-631D)

Dorman – Integrated Latch Actuator (Part No.931-401)

Dorman – Toyota Hood Insulation Retainer (Part No.963-088D)

KAI – New Standard Replacement Front Bumper Grille, Matte-Black (Part No.TO1036116)

Dorman – Window Regulator: Power, 1 Pack (Part No.752-734)

Burco – Heated Side View Mirror Replacement (Part No.5363H)

KAI – Hood Panel (Part No.TO1230214PP)

Dorman – Help – Exterior Door Handle (Part No.81170)

KAI – New Standard Replacement Door Mirror (Part No.TO1321439)

Dorman – Moulding Retainer Head Dia 1.01 X 0.51 In Shank Lng 0.92 In Hole Dia 0.39 In (Part No.963-647)

Dorman – Door Hinge Assembly Door Lower or Upper (Part No.924-991)

KAI – New CAPA Certified Standard Replacement Passenger Side Rear Bumper Cover Reflector (Part No.LX2831100C)

KAI – New CAPA Certified Standard Replacement Driver Side Rear Bumper Cover Reflector (Part No.LX2830100C)

Dorman – Toyota Hood Insulation Retainer (Part No.963-088D)

Dorman – Toyota Molding Retainer (Part No.963-533D)

Atlas Lift – Lift Support (Part No.LS10654)

KAI – Hood Panel (Part No.TO1230214PP)

StrongArm – Liftgate Lift Support: 19.78" Ext Length, 7.25" Travel, 137 Lbs of Force, 1 Pk (Part No.D6680)

Dorman – Hood Insulator Clip – Toyota (sold by each) (Part No.700-669)

Dorman – Toyota Fender Liner Retainer (Part No.963-509D)

KAI – Fender Liner (Part No.TO1249157C)

KAI – Fender Liner (Part No.TO1248157C)

Dorman – Fender Retainer-Interior-Toyota (Part No.963-509)

Dorman – Window Regulator: Power, 1 Pack (Part No.752-734)

Dorman – Window Regulator: Power, 1 Pack (Part No.752-735)

Dorman – Help – Exterior Door Handle without keyhole (Part No.79805)

Dorman – Help – Exterior Door Handle (Part No.81169)

Dorman – Help – Exterior Door Handle Without Keyhole Textured Black (Part No.81009)

Dorman – Help – Exterior Door Handle Textured Black (Part No.81156)

Dorman – Help – Exterior Door Handle (Part No.81207)

Dorman – Help – Exterior Door Handle (Part No.81170)

Dorman – Help – Exterior Door Handle without keyhole (Part No.81167)

Dorman – Help – Interior Door Handle (Part No.88156)

Dorman – Help – Interior Door Handle or Chrome Lever Brown Knob (Part No.91371)

Dorman – Help – Interior Door Handle or Chrome Lever Brown Knob (Part No.91370)

Dorman – Help – Door Hinge Pin and Bushing Kit (Part No.38681)

Dorman – Integrated Latch Actuator (Part No.931-401)

Dorman – Integrated Latch Actuator (Part No.931-403)

Dorman – Integrated Latch Actuator (Part No.931-404)

Dorman – Door Hinge Assembly Door Lower or Upper (Part No.924-991)

Dorman – Integrated Latch Actuator (Part No.931-405)

Dorman – Help – Door Hinge Pin and Bushing Kit (Part No.38471)

Carquest Premium – Door Lock Actuator (Part No.DLE2584)

Carquest Premium – Door Jamb Switch (Part No.DJA1004)