2011 Toyota Sienna Body Parts

Essential Body Parts for 2011 Toyota Siennas

KAI – New CAPA Certified Standard Replacement Driver Side Rear Bumper Cover Reflector (Part No.LX2830100C)

New CAPA Certified Standard Replacement Driver Side Rear Bumper Cover Reflector

from

$30.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Driver Side Rear Bumper Cover Reflector, Sienna Except SE Model. It is Designed to Replace Your Existing Bmp Cover Reflector. Check To Be Sure it Fits Your Vehicle.

Product Features:
  • Excludes Sienna SE Model
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

StrongArm – Liftgate Lift Support: 24.54" Ext Length, 9.7" Travel, 124 Lbs of Force, 1 Pk (Part No.C4994)

Liftgate Lift Support: 24.54" Ext Length, 9.7" Travel, 124 Lbs of Force, 1 Pk

from

$24.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

KAI – Fender Liner (Part No.TO1248204)

Fender Liner

from

$96.99
New Standard Replacement Driver Side Fender Liner, SE Models

Product Features:
  • SE Models, Made Of Polyethylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Help – Door Hinge Pin Kit (Part No.38401)

Door Hinge Pin Kit

from

$13.99
This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
  • Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Exterior Door Handle (Part No.80357)

Exterior Door Handle

from

$57.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

KAI – Hood Hinge (Part No.TO1236169)

Hood Hinge

from

$14.99
New Standard Replacement Passenger Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Hood Release Cable Assembly (Part No.912-410)

Hood Release Cable Assembly

from

$38.49
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this hood release cable is made to match the original cable on specific vehicles.
  • Durable construction -manufactured within strict tolerances for reliable longevity.
  • Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Door Hinge Assembly Front Door Lower Left Or Upper Right (Part No.924-991)

Door Hinge Assembly Front Door Lower Left Or Upper Right

from

$39.49
This door hinge is designed to match the function of an original equipment hinge on specified vehicles. It is engineered to securely connect a door and door frame to help restore proper door operation and replace a rusted, failed, or damaged hinge.

Product Features:
  • Direct replacement – this door hinge is designed to match the fit, function and performance of an original equipment hinge on specified vehicles.
  • Ideal solution – engineered to securely connect a door and door frame to help restore proper door operation, and seamlessly replace a rusted, failed, or damaged hinge.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Integrated Liftgate Actuator (Part No.931-873)

Integrated Liftgate Actuator

from

$354.99
This liftgate lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this liftgate lock actuator has undergone extensive quality and safety performance testing.
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone try-on and cycle testing to ensure a quality fit and long service life
See More

KAI – Bumper Cover Support Rail (Part No.TO1143110)

Bumper Cover Support Rail

from

$8.99
New Standard Replacement Passenger Side Rear Bumper Cover Side Support Bracket

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Le Bra – Front End Cover, Vinyl, Black (Part No.551078-01)

Front End Cover, Vinyl, Black

from

$157.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
See More

Dorman – Plastic Splash Shield Hardware (Part No.66005)

Plastic Splash Shield Hardware

from

$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

KAI – Hood Panel (Part No.TO1230220V)

Hood Panel

from

$581.99
New Economy Replacement Hood Panel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Spare Tire Hoist Assembly (Part No.924-525)

Spare Tire Hoist Assembly

from

$119.99
Spare tire hoist rusted out and corroded? This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:
  • Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models.
  • Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement.
  • Functionality ensured – hoist appearance may vary slightly from original part but functions the same
  • Corrosion resistant – specially coated to prevent future rust and corrosion
See More

AISIN – Door Lock Assembly (Part No.O3001848842ASC)

Door Lock Assembly

from

$356.96
Door Lock Assembly

Dorman – Toyota Molding Retainer (Part No.963-533D)

Toyota Molding Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Burco – Heated Side View Mirror Replacement (Part No.4374H)

Heated Side View Mirror Replacement

from

$54.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)

Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum

from

$48.49
The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

Product Features:
  • Classic Styling Of Brite-Tread Aluminum
  • Front Or Rear Wheel Protection
  • Radius Notch Contours To The Fender Well
  • Protected By A BriteGard Powder Coat Finish
See More

COAST TO COAST – Full Cover, Chrome Plated, Abs Plastic, Set Of 2 (Part No.CCIMC67421)

Full Cover, Chrome Plated, Abs Plastic, Set Of 2

from

$51.99
Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Mirror Covers. Add Handles And Wheel Skins (Sold Separately) For A Factory-Style Package
  • Mirror Covers Are Year-Make-Model Specific And Available In Different Finishes
  • Fits Like A Glove Over Existing Mirrors And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
  • UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
  • COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
  • EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
See More

Dorman – Toyota Splash Shield Retainer (Part No.961-034D)

Toyota Splash Shield Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Help – Interior Door Handle Front Left (Part No.81283)

Interior Door Handle Front Left

from

$41.99
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

KAI – Bumper Cover Retainer (Part No.TO1133110)

Bumper Cover Retainer

from

$39.99
New Standard Replacement Passenger Side Rear Bumper Cover Retainer Bracket

Product Features:
  • Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

AISIN – Door Lock Actuator M (Part No.O30201342916ASC)

Door Lock Actuator M

from

$156.60
Door Lock Actuator M

KAI – New Standard Replacement Grille, Black Finish With Chrome Molding, Base And LE Models (Part No.TO1200334)

New Standard Replacement Grille, Black Finish With Chrome Molding, Base And LE Models

from

$145.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, Black Finish With Chrome Molding, Base and LE Models. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Black Finish With Chrome Molding, Base And LE Models, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Window Regulator: Power, 1 Pack (Part No.740-511)

Window Regulator: Power, 1 Pack

from

$69.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

K-Source – Mirror Assembly: Driver Side, Power Adjustment, Heated, Foldable, 1 Pk (Part No.70024T)

Mirror Assembly: Driver Side, Power Adjustment, Heated, Foldable, 1 Pk

from

$111.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
  • Mirror glass is power adjustable and heated
  • OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
  • Manual folding for additional clearance
  • Black
See More

KAI – Bumper Impact Absorber (Part No.TO1070156C)

Bumper Impact Absorber

from

$126.99
New CAPA Certified Premium Replacement Front Bumper Impact Absorber

Product Features:
  • Made Of Expanded Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bumper Cover Side Support (Part No.TO1042116C)

Bumper Cover Side Support

from

$42.99
New CAPA Certified Standard Replacement Driver Side Front Bumper Cover Side Support

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Upgrade your 2011 Toyota Sienna with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2011 Toyota Sienna, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Body Parts are key to keeping your Sienna functioning at its best. At Advance Auto Parts, we offer a wide selection of 94 Body Parts for the 2011 Toyota Sienna, designed to meet your needs without breaking the bank. From Vehicle Window replacements to Vehicle Hoods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2011 Toyota Sienna at great prices. Our Body Parts inventory for this model ranges from just $1.99 to $679.99, with an average price of $109.17. Our 94 Body Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 2011 Toyota Sienna without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Toyota Sienna, we stock popular OEM and aftermarket Body Parts from top names like Dorman Dee Zee, and more. Dorman Body Parts start at just $1.99 and boast an impressive 4 stars average rating from customers. With 21 customer reviews and counting, our 2011 Toyota Sienna Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Toyota Sienna is always ready to roll. We’re committed to providing you with everything you need to keep your Sienna in top shape, all in one place. Start shopping confidently below for your 2011 Toyota Sienna!

Best-Selling Vehicle Windows for 2011 Toyota Siennas

Enhance the driving experience in your Toyota with 3 quality Vehicle Window components, starting at $78.99.

Dorman – Power Window Regulator (Regulator Only) (Part No.752-823)

Power Window Regulator (Regulator Only)

from

$93.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

Dorman – Power Window Regulator (Regulator Only) (Part No.752-822)

Power Window Regulator (Regulator Only)

from

$80.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

Dorman – Window Regulator: Power, 1 Pack (Part No.752-728)

Window Regulator: Power, 1 Pack

from

$78.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles.
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life.
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

Most Popular 2011 Toyota Sienna Vehicle Hoods

Customize your Toyota with 10 Vehicle Hoods products like Lift Supports, Hood Release Cables, and Hood Hinges, all priced under $647.99.

Dorman – Toyota Molding Retainer (Part No.963-533D)

Toyota Molding Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

StrongArm – Liftgate Lift Support: 22.06" Ext Length, 6.5" Travel, 178 Lbs of Force, 1 Pk (Part No.C6763)

Liftgate Lift Support: 22.06" Ext Length, 6.5" Travel, 178 Lbs of Force, 1 Pk

from

$58.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

StrongArm – Liftgate Lift Support: 22.06" Ext Length, 6.5" Travel, 189 Lbs of Force, 1 Pk (Part No.C6888)

Liftgate Lift Support: 22.06" Ext Length, 6.5" Travel, 189 Lbs of Force, 1 Pk

from

$52.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

Atlas Lift – Lift Support (Part No.LS10808)

Lift Support

from

$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

KAI – Hood Panel (Part No.TO1230220PP)

Hood Panel

from

$647.99
New CAPA Certified Premium Replacement Hood Panel, Made Of High Strength Steel

Product Features:
  • Made Of High Strength Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Panel (Part No.TO1230220V)

Hood Panel

from

$581.99
New Economy Replacement Hood Panel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Hood Release Cable Assembly (Part No.912-410)

Hood Release Cable Assembly

from

$38.49
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this hood release cable is made to match the original cable on specific vehicles.
  • Durable construction -manufactured within strict tolerances for reliable longevity.
  • Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

StrongArm – Liftgate Lift Support: 22.06" Ext Length, 6.5" Travel, 163 Lbs of Force, 1 Pk (Part No.C7131)

Liftgate Lift Support: 22.06" Ext Length, 6.5" Travel, 163 Lbs of Force, 1 Pk

from

$29.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
See More

KAI – Hood Hinge (Part No.TO1236169)

Hood Hinge

from

$14.99
New Standard Replacement Passenger Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.TO1236170)

Hood Hinge

from

$14.99
New Standard Replacement Driver Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Top Picks for 2011 Toyota Sienna Vehicle Doors

Upgrade Toyota Siennas with top-quality Vehicle Doors parts, including 8 OEM and aftermarket selections for your 2011 model.

Dorman – Help – Door Hinge Pin and Bushing Kit (Part No.38681)

Door Hinge Pin and Bushing Kit

from

$16.29
This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
  • Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Integrated Latch Actuator, Front Right (Part No.931-403)

Integrated Latch Actuator, Front Right

from

$278.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Dorman – Door Hinge Assembly Front Door Lower Left Or Upper Right (Part No.924-991)

Door Hinge Assembly Front Door Lower Left Or Upper Right

from

$39.49
This door hinge is designed to match the function of an original equipment hinge on specified vehicles. It is engineered to securely connect a door and door frame to help restore proper door operation and replace a rusted, failed, or damaged hinge.

Product Features:
  • Direct replacement – this door hinge is designed to match the fit, function and performance of an original equipment hinge on specified vehicles.
  • Ideal solution – engineered to securely connect a door and door frame to help restore proper door operation, and seamlessly replace a rusted, failed, or damaged hinge.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Integrated Latch Actuator (Part No.931-868)

Integrated Latch Actuator

from

$679.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

AISIN – Door Lock Actuator M (Part No.O30201342922ASC)

Door Lock Actuator M

from

$392.90
Door Lock Actuator M

AISIN – Door Lock Assembly (Part No.O3001848842ASC)

Door Lock Assembly

from

$356.96
Door Lock Assembly

Carquest Premium – Premium Door Lock Actuator DLE2584 (Part No.DLE2584)

Premium Door Lock Actuator DLE2584

from

$161.99
Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Product Features:
  • Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness
See More

Carquest Premium – Deck Lid / Liftgate Ajar Switch (Part No.DJA1004)

Deck Lid / Liftgate Ajar Switch

from

$17.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

In-Demand Vehicle Latches and Handles for 2011 Toyota Siennas

Select from 9 premium Vehicle Latches and Handles parts for your 2011 Toyota Sienna, with prices ranging from $42.99 to $373.39.

Dorman – Help – Exterior Door Handle Front Right without keyhole (Part No.79805)

Exterior Door Handle Front Right without keyhole

from

$74.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Exterior Door Handle Front Right Without Keyhole Textured Black (Part No.81009)

Exterior Door Handle Front Right Without Keyhole Textured Black

from

$84.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Exterior Door Handle Front Left Textured Black (Part No.81156)

Exterior Door Handle Front Left Textured Black

from

$85.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

AISIN – Door Lock Actuator M (Part No.O30201342926ASC)

Door Lock Actuator M

from

$373.39
Door Lock Actuator M

AISIN – Door Lock Assembly (Part No.O3001848841ASC)

Door Lock Assembly

from

$328.83
Door Lock Assembly

Dorman – Help – Exterior Door Handle Front Right without keyhole (Part No.81167)

Exterior Door Handle Front Right without keyhole

from

$161.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Interior Door Handle Front/Rear Left (Part No.88156)

Interior Door Handle Front/Rear Left

from

$46.49
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Interior Door Handle Front Or Rear Left Chrome Lever Brown Knob (Part No.91371)

Interior Door Handle Front Or Rear Left Chrome Lever Brown Knob

from

$43.49
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Interior Door Handle Front Or Rear Right Chrome Lever Brown Knob (Part No.91370)

Interior Door Handle Front Or Rear Right Chrome Lever Brown Knob

from

$42.99
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Most Sold 2011 Toyota Sienna Bodies and Fender Parts

Explore our best-selling Toyota parts for the 2011 Sienna among 15 OEM and aftermarket options starting from $1.99.

Dorman – Toyota Splash Shield Retainer (Part No.961-034D)

Toyota Splash Shield Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)

Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material

from

$28.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Universal Fitting
  • Easy No Drill Installation
  • Perfect Compliment Nerf Bars
See More

Dorman – Toyota Splash Shield Retainer (Part No.700-077CD)

Toyota Splash Shield Retainer

from

$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)

Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum

from

$48.49
The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

Product Features:
  • Classic Styling Of Brite-Tread Aluminum
  • Front Or Rear Wheel Protection
  • Radius Notch Contours To The Fender Well
  • Protected By A BriteGard Powder Coat Finish
See More

Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)

11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On

from

$39.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Classic Diamond Style Design
  • Protected By A BriteGard Powder Coat Finish
  • Compliment Brite-Tread Running Boards
See More

KAI – Fender Liner (Part No.TO1248163)

Fender Liner

from

$72.99
New Standard Replacement Driver Side Fender Liner, Excludes SE Models

Product Features:
  • Excludes SE Models, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Spare Tire Hoist Assembly (Part No.924-525)

Spare Tire Hoist Assembly

from

$119.99
Spare tire hoist rusted out and corroded? This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:
  • Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models.
  • Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement.
  • Functionality ensured – hoist appearance may vary slightly from original part but functions the same
  • Corrosion resistant – specially coated to prevent future rust and corrosion
See More

KAI – Fender Liner (Part No.TO1249163C)

Fender Liner

from

$93.99
New CAPA Certified Standard Replacement Passenger Side Fender Liner

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Le Bra – Custom Front End Cover (Part No.551349-01)

Custom Front End Cover

from

$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

Le Bra – Front End Cover (Part No.551237-01)

Front End Cover

from

$157.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

KAI – Fender Liner (Part No.TO1248163C)

Fender Liner

from

$94.99
New CAPA Certified Standard Replacement Driver Side Fender Liner, Excludes SE Models

Product Features:
  • Excludes SE Models, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Liner (Part No.TO1248167)

Fender Liner

from

$73.99
New Standard Replacement Driver Side Fender Liner, SE Models

Product Features:
  • SE Models, Made Of Polyethylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Liner (Part No.TO1249163)

Fender Liner

from

$73.99
New Standard Replacement Passenger Side Fender Liner, Excludes SE Model

Product Features:
  • Excludes SE Model, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Liner (Part No.TO1249167)

Fender Liner

from

$73.99
New Standard Replacement Passenger Side Fender Liner, SE Models

Product Features:
  • SE Models, Made Of Polyethylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Covercraft – Custom Hood Protector (Part No.45677-01)

Custom Hood Protector

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:
  • Protects vehicle’s hood from bugs or rock chips
  • Low profile, aerodynamic design
  • Installs in less than 5 minutes, no tools required
  • Custom fit exactly to your vehicle
  • Leather grain vinyl
See More

Top-Rated Body Parts Brands For Your 2011 Toyota Sienna

Shop for the best-rated brands offering Body Parts and other products for your 2011 Toyota Siennas. Below you’ll find some of our best rated Body Parts from Dorman and Dee Zee, and more. Body Parts from these brands that fit a 2011 Sienna start at just $1.99 and are rated as high as 4 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 2011 Toyota Sienna Body Parts

When it comes to maintaining or upgrading your 2011 Toyota Sienna, using quality Body Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Body Parts, specifically designed for the 2011 Toyota Sienna. With over 29 Dorman brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $1.99, with an average price of just $111.38. Plus, with over 2 customer reviews and an average rating of 4 stars, you can trust that our Dorman Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Toyota Molding Retainer
from
$4.49
This product is not rated

Toyota Molding Retainer

“”

Toyota Splash Shield Retainer
from
$1.99
This product is not rated

Toyota Splash Shield Retainer

“”

Integrated Latch Actuator, Front Right
from
$278.99
This product is not rated

Integrated Latch Actuator, Front Right

“”

Popular Dee Zee 2011 Toyota Sienna Body Parts

Dee Zee auto parts is one of the highest quality Body Part brands in the market. Any 2011 Toyota Sienna owner should feel confident when installing genuine Dee Zee parts in their vehicle. To ensure the best fit and performance for your 2011 Sienna, Advance Auto Parts carries a full inventory of 3 Dee Zee Body Parts. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Dee Zee Body Parts range from $28.49 to $48.49, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.

Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material
from
$28.49

(1)

Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material

“Thought online pic had more contour for fit. These are pretty flat and cheap looking. Can I return these?”

FAQs for 2011 Toyota Sienna Body Parts

Which Body Parts are best-sellers for 2011 Toyota Siennas?

Out of 94 Body Parts that fit 2011 Toyota Siennas, the following parts are the top sellers:

What’s the price range for 2011 Toyota Sienna Body Parts?

Body Part prices for the 2011 Toyota Sienna start at $1.99 and go up to $679.99 for the most premium parts.

What’s the average price of a Body Part for a 2011 Toyota Sienna?

The average price for Body Parts for the 2011 Toyota Sienna is $109.17. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Toyota Sienna model years?

Yes, we currently carry Body Parts for 26 model years of Toyota Siennas between 1998 and 2024. Body Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Body Parts for my 2011 Toyota Sienna?

The cheapest 2011 Toyota Sienna Body Parts we carry in stock are:

What types of Body Parts do you sell for my 2011 Toyota Sienna?

As of 2/5/25, these are some of the most in-demand types of Body Parts for a 2011 Toyota Sienna:

Can I get help with 2011 Toyota Sienna Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Body Parts and more.

What is your return policy for Toyota Sienna Body Parts?

Advance Auto Parts keeps returns simple. For new Toyota Sienna Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.