2011 Toyota RAV4 Suspension Parts

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

• Nuts and Bolt: SAE Standard Grade
• Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
• Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
• Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
• Outer Tube: Long-lasting corrosion and rust protection.
• Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
• Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
• Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
• Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
• Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
• EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

This lateral arm and ball joint assembly is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Construction and design validated by MOOG engineers
• Engineered to meet or exceed OE requirements
• Incorporates proven design and engineering features

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The Highest Quality Replacement Strut Mount Available
• Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
• Superior Rubber Reduces Noise, Vibration And Harshness
• Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
• Matched Grade Studs And Nuts

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

• Maintains Better Alignment While Driving
• Full Floating and Non Binding
• Fits Into the Remaining Stock Control Arms

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

• REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
• PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
• KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
• ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
• PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
• EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
• BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

Driveworks Shock Mount, Suspension Strut Bellows

Product Features:

• Designed to meet or exceeds OE performance specifications
• Durable neoprene rubber

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

• Made of Superior Hyper-Flex+ Material
• Lasts from 3 to 10 Times Longer
• Assemble to Chassis Same Way as OEM
• Maintains Factory Ride Characteristics
• Simple Way to Increase Vehicle Height

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
• EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The Highest Quality Replacement Strut Mount Available
• Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
• Superior Rubber Reduces Noise, Vibration And Harshness
• Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
• Matched Grade Studs And Nuts

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The Highest Quality Replacement Strut Mount Available
• Engineered And Built Specifically For The Toyota Rav4
• Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
• Superior Rubber Reduces Noise, Vibration And Harshness
• Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
• Matched Grade Studs And Nuts

The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.

Product Features:

• Restores OE performance
• One way anti-foaming valve reduces foaming and performance fade
• Three stage dual valving
• Teflon coated piston valve
• Seamless inner cylinder and eye ring, no leaks
• Bonded bushings and sleeves
• Hard chromed piston rod

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

• Nuts and Bolt: SAE Standard Grade
• Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
• Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
• Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
• Outer Tube: Long-lasting corrosion and rust protection.
• Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
• Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
• Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
• Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
• Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

Discover the difference Coil Rite air helper springs can make in improving the ride, handling and braking of your vehicle. Coil Rite air helper springs provide extra support for coil springs in cars, minivans, vans, light trucks, RVs and SUVs. The adjustable Coil Rite air helper springs will level your vehicle, provide a smoother ride, and assist with more effective braking and handling, even under heavy loading and adverse road conditions. Coil Rite air helper springs are designed to fit inside existing coil spring suspensions, creating a variable rate spring. These air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle. Firestone Coil Rite air helper springs enable adjustment for varying loads and road conditions by controlling the air pressure in the air helper springs. Spring performance can be altered as easily as inflating a tire. The air springs will support 500 To 1000 Pounds per set.

Product Features:

• Made Of Durable Polyurethane To Withstand The Rigors Of Coil-Sprung Suspensions
• Increase Vehicle Stability Absorbs Road Shock Providing A Smooth Ride For Passengers And Load
• Keep The Vehicle Level, Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
• Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
• Discover The Difference Coil Rite Air Helper Springs Can Make In Improving The Ride, Handling And Braking Of Your Vehicle
• No Drill Installation
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

• #1 Recommended Original Equipment Replacement Choice For Asian Subs And Crossovers
• The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Nissan Quest
• The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
• Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
• Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
• KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

The KYB Excel-G OE-equivalent direct fit shock absorber is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions.

Product Features:

• Direct fit application for ease of installation
• Calibrated to compensate for worn suspensions
• Components and valving are designed specifically for each application
• The best choice to restore OE performance and normal driving conditions
• Built with quality that matches or exceeds OE
• Coverage for domestic and import cars, trucks, vans, minivans, and SUVs

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Trailing Arm

Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.

Product Features:

• Direct replacement – this suspension trailing arm fits and functions like the original equipment part
• Quality construction – manufactured from same materials as original equipment for safety and reliability
• Durable – protective finish for long-lasting corrosion resistance
• Quality tested – has undergone testing to ensure proper fit and performance

Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.

Product Features:

• Direct replacement – this suspension trailing arm fits and functions like the original equipment part
• Quality construction – manufactured from same materials as original equipment for safety and reliability
• Durable – protective finish for long-lasting corrosion resistance
• Quality tested – has undergone testing to ensure proper fit and performance

As part of the Vehicle Stability System multiple sensor inputs are required for the processor to perform the brake control operation to maintain vehicle skid control and vehicle stability control. The Power Steering Speed Sensor provides the processor the needed steering position and rotational speed input required for proper braking operation.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.