2011 Subaru Impreza Belts and Hoses

Name: Premium Molded Coolant Hose
Brand: Gates
SKU: 23459
Price: 25.49 USD

Below you will find various in-demand Subaru Belts and Hoses, components and accessories for your 2011 Impreza. Advance Auto Parts has popular Impreza parts like Oil Cooler Hoses, Radiator Hoses, Engine Cooling Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Impreza model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2011 Subaru Impreza Belts and Hoses below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2011 Subaru Impreza Belts and Hoses Categories

Serpentine Belts

Engine Oil Cooler Hoses

Transmission Oil Cooler Hoses

Essential Belts and Hoses for 2011 Subaru Imprezas

from

$25.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

The specially designed materials resist collapse under vacuum.
Designed to resist electrochemical degradation, which is the primary cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$33.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$3.99

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures over prolonged periods, which extends the service life.
Compliant with SAE 20R3 Standard Wall Class D-2 requirements
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Warning: Do not use for fuel or oil transfer applications
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$23.99

Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:

Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

from

$28.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$27.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$29.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads & temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives.
Engineered to help address noise issues caused by the belt drive
Engineered to help address noise issues caused by the belt driveá
Capable of handling more extreme temperatures and workloads
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$23.99

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$3.79

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for long periods of time, which prolongs the service life
Compliant with SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Warning: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$17.79

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Possesses all the quality characteristics of Gates molded cooling tubing and is similar to original manufacturer specifications.
Designed to resist electrochemical degradation, the main cause of casing failure
EPDM tube, synthetic fiber reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Warning: Do not use for fuel or oil transfer applications

from

$26.99

Possesses all the quality characteristics of Gates molded cooling tubing and is similar to original manufacturer specifications.
Designed to resist electrochemical degradation, which is the primary cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature range: -40 Deg. F to +275 Deg. F (-40 Deg. F (+135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Warning: Do not use for fuel or oil transfer applications

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Size: 1/2 in. x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Medium duty applications

from

$59.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Used on Chevrolet V8 applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Comes with all parts needed for the job

from

$44.99

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$60.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$26.99

The special belt construction eliminates noise, reduces tension loss, and solves transmission problems.
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all original equipment manufacturer specifications.
Replacing the tensioner is recommended (if the vehicle is equipped with one).
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$20.49

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$40.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$35.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$8.29

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$27.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$13.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$42.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$21.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$20.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$19.79

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$36.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

Upgrade your 2011 Subaru Impreza with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2011 Subaru Impreza, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Subaru or enhancing its overall performance, Belts and Hoses are key to keeping your Impreza functioning at its best. At Advance Auto Parts, we offer a wide selection of 16 Belts and Hoses for the 2011 Subaru Impreza, designed to meet your needs without breaking the bank. From Oil Cooler Hose replacements to Radiator Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2011 Subaru Impreza at great prices. Our Belts and Hoses inventory for this model ranges from just $14.49 to $59.99, with an average price of $32.21. Our 16 Belts and Hoses in stock come from 4 trusted brands, so you’re sure to find the right part for your 2011 Subaru Impreza without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Subaru Impreza, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Driveworks, Imperial, and more. Dayco Belts and Hoses start at just $27.99 and boast an impressive 4.5 stars average rating from customers. Driveworks and Imperial also bring quality to the table, with Belts and Hoses available starting at $15.79, and at an average 4.2 stars rating. With 1,376 customer reviews and counting, our 2011 Subaru Impreza Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Subaru Impreza is always ready to roll. We’re committed to providing you with everything you need to keep your Impreza in top shape, all in one place. Start shopping confidently below for your 2011 Subaru Impreza!

Best-Selling Oil Cooler Hoses for 2011 Subaru Imprezas

Enhance the driving experience in your Subaru with 2 quality Oil Cooler Hose components, starting at $48.99.

show more show less

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Size: 1/2 in. x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Medium duty applications

from

$59.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Used on Chevrolet V8 applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Comes with all parts needed for the job

Top Picks for 2011 Subaru Impreza Engine Cooling Hoses

Upgrade Subaru Imprezas with top-quality Engine Cooling Hoses parts, including 1 OEM and aftermarket selections for your 2011 model.

show more show less

from

$36.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

In-Demand Serpentine and V Belts for 2011 Subaru Imprezas

Select from 6 premium Serpentine and V Belts parts for your 2011 Subaru Impreza, with prices ranging from $15.79 to $38.99.

show more show less

from

$27.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$15.79

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$23.99

Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

from

$28.99

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning.
Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
Elasticity allows for long-lasting performance and proper tension
Elasticityáallows for long-lasting performance and proper tension

from

$38.99

The special belt construction eliminates noise, reduces tension loss, and solves transmission problems.
EPDM rubber constructions resist cracking on the surface of the ribs.
Meets or exceeds all original equipment manufacturer specifications
It is recommended to replace the tensioner (if equipped).
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$26.99

The special belt construction eliminates noise, reduces tension loss, and solves transmission problems.
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all original equipment manufacturer specifications.
Replacing the tensioner is recommended (if the vehicle is equipped with one).
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

Most Sold 2011 Subaru Impreza Heater Hoses

Explore our best-selling Subaru parts for the 2011 Impreza among 2 OEM and aftermarket options starting from $28.99.

show more show less

from

$28.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$41.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

Top-Rated Belts and Hoses Brands For Your 2011 Subaru Impreza

Shop for the best-rated brands offering Belts and Hoses and other products for your 2011 Subaru Imprezas. Below you’ll find some of our best rated Belts and Hoses from Dayco, Driveworks, and Imperial, and more. Belts and Hoses from these brands that fit a 2011 Impreza start at just $15.79 and are rated as high as 4.5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2011 Subaru Impreza Belts and Hoses

When it comes to maintaining or upgrading your 2011 Subaru Impreza, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2011 Subaru Impreza. With over 3 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $27.99, with an average price of just $32.99. Plus, with over 62 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $36.99

(6)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5" Long, 1.50" Diameter

“Better then the OE one we pulled off. Comes with a protective mesh cover which is a plus.”

from $33.99

(9)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.5" Long, 1.50" Diameter

“It bend”

from $27.99

(47)

Poly Rib Belt Serpentine Belt; 34.5 Long, 5 Rib Count

“works great and fit perfectly – good price.”

Popular Driveworks 2011 Subaru Impreza Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 2011 Subaru Impreza owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2011 Impreza, Advance Auto Parts carries a full inventory of 1 Driveworks Belts and Hoses. Plus you will be keeping your Subaru in peak condition while saving money because prices on these Driveworks Belts and Hoses range up to $15.79, plus, with more than 16 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $15.79

(16)

Poly Rib Belt Serpentine Belt; 34.5 Long, 5 Rib Count

“Fits perfectly”

FAQs for 2011 Subaru Impreza Belts and Hoses

Which Belts and Hoses are best-sellers for 2011 Subaru Imprezas?

Out of 16 Belts and Hoses that fit 2011 Subaru Imprezas, the following parts are the top sellers:

Poly Rib Belt Serpentine Belt; 34.5 Long, 5 Rib Count (5061911) – $15.79
Ela Poly Rib Belt (10844495) – $23.99
Stretch Serpentine Belt; 32.6 Long, 4 Rib Count, Zip Tie Required (12482949) – $28.99

What’s the price range for 2011 Subaru Impreza Belts and Hoses?

Belts and Hose prices for the 2011 Subaru Impreza start at $14.49 and go up to $59.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2011 Subaru Impreza?

The average price for Belts and Hoses for the 2011 Subaru Impreza is $32.21. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Subaru Impreza model years?

Yes, we currently carry Belts and Hoses for 31 model years of Subaru Imprezas between 1993 and 2025. Belts and Hoses are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Belts and Hoses for my 2011 Subaru Impreza?

The cheapest 2011 Subaru Impreza Belts and Hoses we carry in stock are:

Molded Heater Hose; EPDM Rubber, 9/16 Inch Diameter, 3 1/2 Inch Length (10149646) – $14.49
Poly Rib Belt Serpentine Belt; 34.5 Long, 5 Rib Count (5061911) – $15.79
Ela Poly Rib Belt (10844495) – $23.99
Premium Molded Coolant Hose (10521028) – $25.49
Micro-V Serpentine Drive Belt (10495714) – $26.99

What are the top-rated Belts and Hoses that fit the 2011 Subaru Impreza?

Out of 1,376 reviews by customers, our 2011 Subaru Impreza Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2011 Subaru Impreza and their top-rated products:

Engine Cooling Hoses
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5" Long, 1.50" Diameter (10574625) – $36.99
Serpentine and V Belts
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5" Long, 1.50" Diameter (10574625) – $36.99
Radiator Hoses
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5" Long, 1.50" Diameter (10574625) – $36.99

What types of Belts and Hoses do you sell for my 2011 Subaru Impreza?

As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 2011 Subaru Impreza:

Can I get help with 2011 Subaru Impreza Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Subaru Belts and Hoses and more.

What is your return policy for Subaru Impreza Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Subaru Impreza Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2011 Subaru Impreza Belts and Hoses

Gates – Premium Molded Coolant Hose (Part No.23459)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.5" Long, 1.50" Diameter (Part No.C72485)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28412)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Dayco – Ela Poly Rib Belt (Part No.E040318)

Dayco – Poly Rib Belt Serpentine Belt; 35.25 Long, 4 Rib Count (Part No.5040353)

Dayco – Poly Rib Belt Serpentine Belt; 34.5 Long, 5 Rib Count (Part No.5050345)

Dayco – Poly Rib Belt Serpentine Belt; 59.72 Long, 6 Rib Count (Part No.5060597)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.80402)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28411)

Gates – Premium Molded Heater Hose (Part No.18791)

Gates – Premium Molded Heater Hose (Part No.19535)

Imperial – Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)

Dorman – Coolant Pipe For Oil Cooler (Part No.626-594)

Gates – Micro-V Serpentine Drive Belt (Part No.K060849)

Gates – Micro-V Serpentine Drive Belt (Part No.K050345)

Driveworks – Poly Rib Belt Serpentine Belt; 77.1 Long, 6 Rib Count (Part No.770K6)

Dayco – Poly Rib Belt Serpentine Belt; 77.1 Long, 6 Rib Count (Part No.5060770)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 11 Inch Length (Part No.87875)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 3 Inch Length (Part No.87964)

Dayco – Molded Heater Hose; EPDM Rubber, 19/32 Inch Diameter, 12 7/8 Inch Length (Part No.87808)

Dayco – Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 8 1/4 Inch Length (Part No.86500)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8.25" Long, 1.44" Diameter (Part No.B71526)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.50" Diameter (Part No.E72112)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.5" Long, 1.47" Diameter (Part No.E72304)

Dayco – Flex Radiator Hoses; EPDM Rubber, 10.75 Inch Long, 1.5 Inch Inner Dia. (Part No.81131)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5" Long, 1.50" Diameter (Part No.E72484)

Imperial – Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.5" Long, 1.50" Diameter (Part No.C72485)

Dayco – Molded Heater Hose; EPDM Rubber, 9/16 Inch Diameter, 3 1/2 Inch Length (Part No.86822)

Gates – Premium Molded Coolant Hose (Part No.23460)

Gates – Premium Molded Coolant Hose (Part No.23459)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5" Long, 1.50" Diameter (Part No.E72484)

Dayco – Poly Rib Belt Serpentine Belt; 34.5 Long, 5 Rib Count (Part No.5050345)

Driveworks – Poly Rib Belt Serpentine Belt; 34.5 Long, 5 Rib Count (Part No.345K5)

Dayco – Ela Poly Rib Belt (Part No.E040318)

Dayco – Stretch Serpentine Belt; 32.6 Long, 4 Rib Count, Zip Tie Required (Part No.4PK828EE)

Gates – Micro-V Serpentine Drive Belt (Part No.K050344)

Gates – Micro-V Serpentine Drive Belt (Part No.K050345)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 14 1/2 Inch Length (Part No.87966)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 14 Inch Length (Part No.87965)