2011 Ram 3500 Differentials

Name: Axle For 03 & Up Chrysler 10.5/ 11.5Aam, 38Spline
Brand: Yukon Gear
SKU: 21436
Price: 319.99 USD

Find your specific 2011 Ram 3500 original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 2011 Ram 3500 Differentials

from

$319.99

38 spline upgraded cut to length axle for 10.5″ & 11.5″ Dodge rear. This cut to length axle will accomodate applications from 36.4″ to 40.1″. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects. The factory spindles will need to be machined in order to accept these axles.

Product Features:

38 spline
Cut to length design fits 36.4″-40.1″ applications
Fits Chrysler 11.5″

from

$13.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$41.99

11.5 GM spanner adjuster nut.

Product Features:

Side adjuster
Fits GM 11.5″

from

$31.99

11.5″ GM standard Open side gear Thrust washer.

Product Features:

Side gear thrust washer
Fits GM 11.5″

from

$13.99

Product Features:

PINION SHIM – DANA 70 ALL

from

$338.99

This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

Product Features:

Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
Related repair – smart to have on hand when installing a differential ring and pinion
Durable construction – built for reliable longevity, free of defects in materials and workmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$13.99

Product Features:

Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80

from

$32.90

PINION SEAL

from

$208.99

11.5AAM GM & Chrysler (fits All Years) UNIVERSAL standard Open spider gear kit.

Product Features:

Spider gear kit
Fits GM and Chrysler 11.5″ open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$10.99

Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

Product Features:

Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
7/8″ x 14 thread

from

$6.59

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$163.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits GM and Chrysler 11.5″
Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.

from

$244.99

Yukon serrated pinion flange for 9.25″ AAM front, Dodge Ram trucks. Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 9.25″ front
29 spline

from

$779.99

11.5″ GM standard Open case, loeaded.

Product Features:

Standard open carrier case and spiders
Fits GM and Chrysler 11.5″

from

$27.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$1485.00

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:

Fits GM and Chrysler 11.5″ with 30 spline axles
Clutch style positraction
Smooth design
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$44.99

11.5″ Chrysler & GM cover gasket.

Product Features:

Cover gasket
Fits GM and Chrysler 11.5″

from

$46.99

11.5″ GM standard Open cross pin shaft.

Product Features:

Cross pin shaft
Fits GM 11.5″

from

$13.99

Crush Sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS & 9.5″. Approx 0.640″ long.

Product Features:

Crush sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS and 9.5″
0.640″ tall

from

$66.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$72.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$1806.99

11.5″ Chrysler Helical gear Type positraction.

Product Features:

Fits GM and Chrysler 11.5″
30 spline

from

$1969.99

Product Features:

Fits Chrysler and GM 11.5″ with 38 spline axles
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$284.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Chrysler 9.25″ front
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$339.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$19.99

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

from

$12.99

GM 9.5″ ring gear bolt. 12mm x 1.5.

Product Features:

Ring gear bolt for GM 9.2″
12mm x 1.5

from

$15.99

11.5″ GM standard Open pinion gear Thrust washer.

Product Features:

Pinion gear thrust washer
Fits GM 11.5″

Popular 2011 Ram 3500 Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Front Housing Cover Gaskets

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Cover Plugs

Differential Ring and Pinions

Differential End Yokes

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearing Adjusters

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Ring and Pinion Kits

Limited Slip Differential Assemblies

Differential Spider and Pinion Gear Kits

Maybe you’re in the middle of a full rebuild of that 2011 Ram 3500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 150 different Differentials in our inventory ranging from $2.99 to $3,169.99. That means you can find the exact parts or products you need to keep that 2011 Ram 3500 running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Ram 3500. Royal Purple, National, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2011 Ram 3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 457 reviews in this category, some of the top rated parts include Multi Purpose Seal with 4.2 stars and Differential Carrier Gear Kit with 3.7 stars.

So if you’re in the market for aftermarket Differentials to keep your 2011 Ram 3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2011 Ram 3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Ram 3500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your 3500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Dorman Differentials

We carry Dorman parts in our stock across Differential Covers categories, plus more. For a 2011 Ram 3500, our most popular Dorman Differentials include:

from $77.99

(2)

Rear Differential Cover

Differential Covers

Top 2011 Ram 3500 Differentials from Royal Purple

Royal Purple products are another trusted brand when it comes to Differentials for your 2011 Ram 3500. Popular Royal Purple parts include:

from $12.99

(82)

High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT

Differential Oil

FAQs for 2011 Ram 3500 Differentials

What are the most purchased Differentials for the 2011 Ram 3500?

Out of 150 Differentials for the 2011 Ram 3500, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $23.99

(7)

Bearings

Front Differential Pinion Bearings

from $13.79

(4)

Taper Bearing Set

Differential Bearings

What are the top-rated 2011 Ram 3500 Differentials?

Top-rated Differentials for your 2011 Ram 3500 based on customer reviews/ratings are:

from $44.99

(5)

Multi Purpose Seal

“How do you fix a leaking rear end? You seal it. That’s why I bought this seal.”

from $176.99

(3)

Differential Carrier Gear Kit

“worked perfect great quality”

from $11.79

(2)

Type TLS Automatic Transmission Fluid – 1 qt

“Good product. Will buy again.”

2011 Ram 3500 Differentials

More 2011 Ram 3500 Differentials

Essential 2011 Ram 3500 Differentials

Yukon Gear – Axle For 03 & Up Chrysler 10.5/ 11.5Aam, 38Spline (Part No.21436)

Driveworks – Taper Bearing Set (Part No.S-A-38)

Yukon Gear – 11.5 GM Spanner Adjuster Nut (Part No.33262)

Yukon Gear – 11.5" GM Standard Open Side Gear Thrust Washer (Part No.33387)

Motive Gear – Differential Pinion Shim Kit (Part No.1111)

Dorman – Ring And Pinion Master Installation Kit (Part No.697-037)

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

SKF – PINION SEAL (Part No.J7010218369SKF)

USA Standard Gear – Spider Gear Kit For GM 11.5" (Part No.39020)

Yukon Gear – Pinion Nut (Part No.33142)

Pro-King – Differential Cover Plug (Part No.742G484)

Yukon Gear – Minor Install Kit For GM & Chrysler 11.5" Differential (Part No.12042)

Yukon Gear – Serrated Pinion Yoke For 9.25" Aam Front, Dodge Truck (Part No.41117)

Yukon Gear – Standard Open Carrier Case & Spiders, GM 11.5" (Part No.20094)

National – Bearings (Part No.HM807010)

Yukon Gear – Dura Grip For GM & Chrysler 11.5", 30 Spline (Part No.26033)

Yukon Gear – 11.5" Chrysler & GM Cover Gasket (Part No.23013)

Yukon Gear – 11.5" GM Standard Open Cross Pin Shaft (Part No.33409)

Yukon Gear – Crush Sleeve (Part No.33099)

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55474)

Felpro – Differential Cover Gasket (Part No.RDS 55473)

Yukon Gear – 11.5" Chrysler & GM Helical Gear Type Positraction (Part No.32244)

Yukon Gear – Spool For GM & Chrysler 11.5", 38 Spline (Part No.32186)

Yukon Gear – Pinion Install Kit For ’03 And Newer Chrysler Dodge Truck 9.25" Front Differential (Part No.13094)

Pro-King – Differential Internal Nest Kit (Part No.724A717)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart (Part No.889787)

Yukon Gear – GM 9.5" Ring Gear Bolt (Part No.33047)

Yukon Gear – 11.5" GM Standard Open Pinion Gear Thrust Washer (Part No.33388)

Popular 2011 Ram 3500 Differentials Categories