2011 Ram 2500 Exhaust System Kits

The Borla (R) Cat-Back (TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Increases The Overall Sound Level And Performance
• Cat-Back (TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade 304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Easy Bolt-On Installation
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 5 in. 409 Stainless Steel Tubing
• Increased Flow And Performance
• High Quality Band Clamps
• Bayonet OE Style/Welded-On Hangers

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

Cat-back System 409S – Dual Rear or Side Exit – American Thunder -Moderate Sound

The MagnaFlow Ram Black DPF Series 17070 brings the dyno-proven performance and deep resonating sound that we¿re known for to your 6.7L 2013-2018 Ram in premium kit that includes tailpipe with a premium black powder-coated finish. This Ram exhaust system is designed to produce Mild interior and Moderate exterior sound levels thanks to clever tuning of its fast-flowing mandrel bent 4in. diameter main piping that ends in a Dual Same Side Behind Passenger Rear Tire exit with 5in. Black Coated Welded-Single Wall-Angle Cut-Rolled Edge-Intercooled tips. Exhaust kit 17070¿s filter-back layout features a direct-fit, easy-to-install design and is made of strong, corrosion-resistant stainless steel. It is produced using CNC precision robotic manufacturing techniques and backed by MagnaFlow¿s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Mandrel Bent Tubing
• 409 Stainless Steel Construction with High Temp Satin Black Coating
• 300 Series Stainless Steel Black Coated Intercooled Tip(s)

PRO Series is the best performance exhaust system that money can buy. It is a series designed and built for the serious enthusiast who will settle for nothing less. Constructed from T304 stainless steel it delivers you optimal durability that keeps on looking its best. Easy to clean and maintain this is the product of choice for owners of lifted vehicles, show trucks or who operate in severe environments.

Product Features:

• 4 Inch Cat Back Single Side Exit (Street Version) Exhaust System
• 4 Inch Mandrel Bent Tubing
• Moderate Sound Level
• Bolt-On, No Weld Design Makes Installation A No Hassle One And A Half To Two-Hour Project

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 5 in. 409 Stainless Steel Tubing
• 7 in. Polished Tip w/Laser Cut Age Badge
• Increased Flow And Performance
• High Quality Band Clamps

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4″ mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with single gloss black 304 stainless steel, double wall slash cut tips for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Free Flowing Muffler
• Smooth Curves
• Hassle Free Installation

The Large Bore HD Performance DPF-Back exhaust features 4″ 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonet style hangers make sure this system installs cleanly and easily.

Product Features:

• Aggressive Sound
• Street Legal
• Includes High Quality Band Clamps
• Direct Bolt On

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Designed and manufactured to meet the needs of the exhaust system repair environment.
• Verified, tested and certified proprietary Organic coating resists corrosion.
• Tightly controlled coefficient of friction ensures reliable installation.
• Application specific kit contents
• Self-locking nuts (where applicable).

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

5.7L HEMI engines often suffer from exhaust hardware failure due to rust, corrosion, and fatigue from thermal cycling. This kit offers a convenient way to service the manifold without spending time chasing the replacement components needed for a complete repair. The kit fits both sides of the engine and includes two exhaust manifold gaskets and two sets of mounting hardware for the exhaust manifold, catalytic converter flange, and exhaust pipe that match the function of those original components. Engineered to fit specified Chrysler, Dodge, Jeep and Ram vehicles equipped with 5.7L HEMI V8 engines, this all-in-one solution is designed to preserve and restore the proper function of the original equipment left-side exhaust manifold.

Product Features:

• Direct replacement – the components in this kit are designed to match the function of the original equipment exhaust manifold gaskets and mounting hardware on specified vehicles
• Time-saver – hassle-free alternative to searching for quality replacements for original equipment components that have failed from heat cycling or corrosion
• Application-specific – precision manufactured to fit specified Chrysler, Dodge, Jeep and Ram vehicles equipped with 5.7L HEMI V8 engines
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience