2011 Ram 2500 Clutch Systems

Essential 2011 Ram 2500 Clutch Systems

Hays – Sfi Flxplt: 07-16 Cummins 6.7:Int Bal (Part No.11-025)

Sfi Flxplt: 07-16 Cummins 6.7:Int Bal

from

$310.99
Sfi Flxplt: 07-16 Cummins 6.7:Int Bal

LUK – Dual Mass Flywheel (DMF) (Part No.I1000835653LUK)

Dual Mass Flywheel (DMF)

from

$758.74
LuK dual-mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual-mass flywheels cannot be resurfaced. This all makes the LuK dual mass flywheel the ideal solution. With one drawback: the higher the mass reactance of the vibrating masses, the more excessive the resonance increase and associated torque peaks. With the dual mass flywheel, this would be easily perceived when starting and stopping the engine; much more easily than with a conventional clutch system. Additionally: the smaller flymass of the engine has less of a stabilizing effect on the speed fluctuation of the engine. Thanks to decades of experience in clutch building, the LuK specialists were able to find an excellent solution to this problem. An additional damping device effectively prevents resonance overload. In normal operation, however, this additional damping device has no function and the torsional vibrations of the engine are filtered out by spring dampers. Friction and spring rate – the correct ratio is important. For optimal vibration isolation and soft resonance passage when starting and stopping the engine, the ratio between friction and spring rate must be optimal. The length of the springs is a key factor: The softer a spring, the more efficiently vibrations are isolated. The extra-long springs of the latest generation of dual mass flywheels significantly reduce the spring rate compared to a first generation dual mass flywheel. In routine driving operations, excessive resonance increases are kept almost completely away from the gearbox.

Product Features:
  • Top driving comfort
  • Absorbs vibrations
  • Prevents noise
  • Enables comfortable, low-revs driving
  • Saves fuel
  • Relieves crankshaft and gearbox
See More

LuK – OE Quality Flywheel (Part No.LFW184)

OE Quality Flywheel

from

$386.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to
See More

LUK – Clutch Lever (Part No.I4000741767LUK)

Clutch Lever

from

$77.94
Clutch Lever

LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC440)

LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER

from

$126.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Sachs – Clutch Release Bearing (Part No.I2020182434SAC)

Clutch Release Bearing

from

$85.43
The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:
  • Extended service life
  • Compact, lightweight design
  • Sealed for life with high performance, application-specific grease
  • Simplified assembly
  • Integrated functionality
  • Design flexibility
See More

National – Multi Purpose Bearing (Part No.614114)

Multi Purpose Bearing

from

$73.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Design improvements include extended life and quiet operation
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

LuK – Clutch Master Cylinder (Part No.LMC480)

Clutch Master Cylinder

from

$123.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

LuK – Clutch Kit: 12 9/16" Disc Diameter, 1 3/8" Input Shaft Diameter, 10 Tooth Spline (Part No.05-124)

Clutch Kit: 12 9/16" Disc Diameter, 1 3/8" Input Shaft Diameter, 10 Tooth Spline

from

$437.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LuK – Clutch Kit: 12 9/16" Disc Diameter, 1 3/8" Input Shaft Diameter, 10 Tooth Spline (Part No.05-185)

Clutch Kit: 12 9/16" Disc Diameter, 1 3/8" Input Shaft Diameter, 10 Tooth Spline

from

$1087.99
Voted #1 recommended Clutch products by installers since 2015. Luk, a Schaeffler brand pioneered the way from the conventional and self-adjusting clutch to the innovative double clutch. We carry a comprehensive product portfolio of complete clutch sets, pressure plates, discs, flywheels, slave and master cylinders and release bearings, The Luk product range also includes a large number of available single components, dampers and absorbers and hydraulic clutch lines.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LuK – Clutch Kit: 12 9/16" Disc Diameter, 1 3/8" Input Shaft Diameter, 10 Tooth Spline (Part No.05-184)

Clutch Kit: 12 9/16" Disc Diameter, 1 3/8" Input Shaft Diameter, 10 Tooth Spline

from

$1026.99
Voted #1 recommended Clutch products by installers since 2015. Luk, a Schaeffler brand pioneered the way from the conventional and self-adjusting clutch to the innovative double clutch. We carry a comprehensive product portfolio of complete clutch sets, pressure plates, discs, flywheels, slave and master cylinders and release bearings, The Luk product range also includes a large number of available single components, dampers and absorbers and hydraulic clutch lines.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LuK – Clutch Kit: 12 9/16" Disc Diameter, 1 3/8" Input Shaft Diameter, 10 Tooth Spline (Part No.05-182)

Clutch Kit: 12 9/16" Disc Diameter, 1 3/8" Input Shaft Diameter, 10 Tooth Spline

from

$955.99
Voted #1 recommended Clutch products by installers since 2015. Luk, a Schaeffler brand pioneered the way from the conventional and self-adjusting clutch to the innovative double clutch. We carry a comprehensive product portfolio of complete clutch sets, pressure plates, discs, flywheels, slave and master cylinders and release bearings, The Luk product range also includes a large number of available single components, dampers and absorbers and hydraulic clutch lines.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

National – Bearings (Part No.SCE-1211)

Bearings

from

$17.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Crown Auto Jeep Replacmnt – Oem Replacement (Part No.52087542)

Oem Replacement

from

$11.49
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

2011 Ram 2500 Clutch Systems

You count on your 2011 Ram 2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 16 Clutch Systems ranging in price from $11.49 to $1,087.99, you’re sure to find everything you need for your 2011 Ram 2500.

Brands matter. If you want to shop a specific Clutch Systems brand, we stock 5 different brands like National, LuK, and Hays. 2011 Ram 2500 Clutch Systems start as low as $11.49!

One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 9 extensive product reviews on 2011 Ram 2500 Clutch Systems.

Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 2011 Ram 2500 below to get started!

Top-Rated Clutch Systems Brands For Your 2011 Ram 2500

Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Ram 2500 running right for years to come. In our inventory you’ll find brands like National, LuK, Hays, and even more.

Popular National Clutch Systems

You’ll find popular National brand products across Clutch Release Bearings. All are waiting to get your 2011 Ram 2500 back on the road. Some of the top-rated National products in these categories are:
Multi Purpose Bearing
from $73.99
(1)
Multi Purpose Bearing
Clutch Release Bearings