2011 Mercury Mariner Steering and Chassis Parts
Find Your Specific 2011 Mercury Mariner Steering and Chassis Parts
Below you will find various in-demand Mercury Steering and Chassis Parts, components and accessories for your 2011 Mariner. Advance Auto Parts has popular Mariner parts like Steering Shafts, Ball Joints, Power Steering Parts and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Mariner model years including
2005,
2006,
2007,
2008,
2009,
2010 and more. Select a category of 2011 Mercury Mariner Steering and Chassis Parts below and start saving instantly.
Popular 2011 Mercury Mariner Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 2011 Mercury Mariners
Driveworks – Tie Rod End (Part No.DW-EV800366)
from
$28.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Dorman – Right Loaded Steering Knuckle (Part No.698-404)
from
$409.99
Our loaded steering knuckle kit makes replacing the assembly a bolt-on solution for an easy installation. Our steering knuckle kit includes everything needed for a complete repair, including the bearing, hub, backing plate, and axle nut.
Product Features:
See More
Product Features:
- Right Loaded Steering Knuckle.
- Right Loaded Steering Knuckle.
- Our loaded steering knuckle kit makes replacing the assembly a bolt-on solution for an easy installation. Our steering knuckle kit includes everything needed for a complete repair, including the bearing, hub, backing plate, and axle nut.
- Direct replacement for a proper fit every time
- Installation components are E-coated for extra protection against rust and corrosion
Dorman – Intermediate Steering Shaft (Part No.425-358)
from
$119.99
This steering shaft universal joint matches the fit and function of the original equipment joint to ensure a safe, reliable repair. Made of quality materials, it features sealed bearings to ensure a long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this steering shaft universal joint matches the fit and function of the original equipment joint for specific makes and models.
- Durable materials – this shift boot is manufactured from quality materials for durability.
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance
Maval – Complete Steering Rack, Remanufactured (Part No.M1000402217MAV)
from
$336.55
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.
Product Features:
See More
Product Features:
- OE quality and direct fit replacement
- Remanufacture based on highest quality standards
- Computerized tests insure that all products meet the OE performance specification.
- Performance and quality approvals from OE steering gear and pump manufacturers world wide
Rare Parts – Sway Bar Fr Bush (Part No.RP22623)
from
$24.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
MOOG – Stabilizer Bar Link (Part No.K750571)
from
$56.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – Camber Bolt Kit (Part No.DW-K9757)
from
$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
MOOG – Toe Adjuster (Part No.K100382)
from
$59.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Replacement Toe Bolt Kit is a direct replacement and will restore
- Greaseable design alleviates bolt corrosion and allows for ease
- Adjustment Range: +/- 2.0
- Easy to install
- Construction and design validated by MOOG engineers
Driveworks – Camber Bolt Kit (Part No.DW-K90473)
from
$17.99
Camber Bolt Kit
Carquest Premium – Power Steering Pressure Hose Assembly, 11mm Male Captive "O" Ring x 18mm Pressure Union – with Switch Port (Part No.37307)
from
$232.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Zinc coated tubes protect against rust and corrosion
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
Carquest Premium – Power Steering Return Hose Assembly, 3/8" Beaded Tube x 3/8" Beaded Tube (Part No.36377)
from
$39.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Cardone – P/S Pump (Part No.M2010901087CAR)
from
$153.30
Cardone Power Steering Pumps are hydraulically tested for proper flow, seal, pressure and output, ensuring like-new performance. The critical components are tested three times, heat, chemical and mechanical bonds keep the high-carbon steel sleeve firmly in place, ensuring exceptional performance. They feature 100 percent computerized and hydraulic testing or proper flow, pressure, leakage and performance.
Product Features:
See More
Product Features:
- 100% computerized hydraulic testing is performed for proper flow, leakage and performance to ensure perfect fit and function
- All critical components (i.e. campacs, spool valves, etc.) are triple tested to ensure product reliability
- All units are built with 100% new seals and o-rings
- Units are supplied with 100% tested and calibrated pressure relief valves
- Shafts are 100% processed to ensure surface finish is within O.E. tolerances
MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)
from
$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Dorman – Right Steering Knuckle (Part No.698-092)
from
$107.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles.
- Reliable fit – precision-engineered to match the dimensions of original components.
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Driveworks – Ball Joint (Part No.DW-K80107)
from
$49.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
CTR – Sway Bar Link (Part No.L1030380683CTR)
from
$27.17
The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
MOOG – Control Arm and Ball Joint Assembly (Part No.RK100072)
from
$99.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MTC – Steering Coupling (Part No.M50202150226MTC)
from
$85.80
Steering Coupling
Dorman – Steering Shaft Joint (Part No.425-398)
from
$139.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision.
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
Motorcraft – REGULATOR ASY (Part No.WPT-169)
from
$24.99
REGULATOR ASY
MOOG – Rack & Pinion Bellows Kit (Part No.K150289)
from
$30.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Rare Parts – R & P Bellows (Part No.RP57368)
from
$34.99
R & P Bellows
MOOG – Camber Adjusting Kit (Part No.K9757)
from
$42.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Whiteline – Camber Adjusting Bolt (Part No.KCA412)
from
$48.99
Suffering uneven tyre wear? Sounds like poor alignment. Whiteline camber bolts provide the largest adjustment range (of up to +/- 1.5deg) to get that alignment back in check. Unlike other ‘friction’ lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Driveworks – Tapered Roller Bearing (Part No.S-LM-29749)
Driveworks – Taper Bearing Cup (Part No.S-M-86610)
from
$4.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Upgrade your 2011 Mercury Mariner with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 2011 Mercury Mariner, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Mariner functioning at its best. At Advance Auto Parts, we offer a wide selection of 79 Steering and Chassis Parts for the 2011 Mercury Mariner, designed to meet your needs without breaking the bank.
From
Steering Shaft
replacements to
Ball Joints
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2011 Mercury Mariner at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $4.99 to $497.94, with
an average price of $97.79.
Our 79 Steering and Chassis Parts in stock come from 15 trusted brands, so you’re sure to find the right part for your 2011 Mercury Mariner without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Mercury Mariner, we stock popular OEM and aftermarket Steering and Chassis Parts from top names
like Imperial, Driveworks, Moog, and more.
Imperial Steering and Chassis Parts
start at just $11.49 and boast an impressive 4 stars average rating from customers.
Driveworks and Moog also bring quality to the table, with Steering and Chassis Parts available starting at $4.99, and at an average 4 stars rating.
With 1,552 customer reviews and counting, our 2011 Mercury Mariner Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2011 Mercury Mariner is always ready to roll. We’re committed to providing you with everything you need to keep your Mariner in top shape, all in one place.
Start shopping confidently below for your 2011 Mercury Mariner!
Best-Selling Steering Shafts for 2011 Mercury Mariners
Enhance the driving experience in your Mercury with 2 quality Steering Shaft components, starting at $85.80.
Dorman – Intermediate Steering Shaft (Part No.425-358)
from
$119.99
This steering shaft universal joint matches the fit and function of the original equipment joint to ensure a safe, reliable repair. Made of quality materials, it features sealed bearings to ensure a long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this steering shaft universal joint matches the fit and function of the original equipment joint for specific makes and models.
- Durable materials – this shift boot is manufactured from quality materials for durability.
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance
MTC – Steering Coupling (Part No.M50202150226MTC)
from
$85.80
Steering Coupling
Most Popular 2011 Mercury Mariner Ball Joints
Customize your Mercury with 21 Ball Joints products
like Lower Control Arm and Ball Joints and
Suspension Ball Joint Kits, all
priced under $246.99.
MOOG – Ball Joint (Part No.K80107)
from
$77.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Driveworks – Ball Joint (Part No.DW-K80107)
from
$49.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
MOOG – Control Arm and Ball Joint Assembly (Part No.RK623210)
from
$103.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Control Arm and Ball Joint Assembly (Part No.RK623209)
from
$103.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Carquest Premium – Suspension Control Arm And Ball Joint Assembly (Part No.810-232647B)
from
$113.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Carquest Premium – Suspension Control Arm And Ball Joint Assembly (Part No.810-232648B)
from
$113.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Control Arm and Ball Joint Assembly (Part No.RK621661)
from
$58.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Control Arm and Ball Joint Assembly (Part No.RK621454)
from
$75.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Dorman – Suspension Control Arm (Part No.521-959)
from
$70.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Control Arm and Ball Joint Assembly (Part No.RK621664)
from
$97.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Control Arm and Ball Joint Assembly (Part No.RK621663)
from
$102.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Control Arm and Ball Joint Assembly (Part No.RK621455)
from
$77.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Dorman – Suspension Control Arm (Part No.522-320)
from
$70.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.522-319)
from
$70.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.521-960)
from
$69.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Rare Parts – Control Arm with Ball Joint (Part No.RP12568)
from
$246.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Rare Parts – Control Arm with Ball Joint (Part No.RP12567)
from
$142.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Rare Parts – Control Arm with Ball Joint (Part No.RP12569)
from
$109.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Rare Parts – Control Arm with Ball Joint (Part No.RP12570)
from
$87.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
MOOG – Control Arm and Ball Joint Assembly (Part No.RK621457)
from
$59.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Control Arm and Ball Joint Assembly (Part No.RK621456)
from
$56.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Top Picks for 2011 Mercury Mariner Power Steering Parts
Upgrade Mercury Mariners with top-quality Power Steering Parts parts, including 17 OEM and aftermarket selections for your 2011 model.
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Beck/Arnley – Steering Rack Boot Kit (Part No.103-3087)
from
$20.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot (this is not a split boot)
- Includes boot and two clamps for complete installation.
- Quality construction for durability
- Application specific for this vehicle
Driveworks – Taper Bearing Cup (Part No.S-M-86610)
from
$4.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Cardone – Remanufactured Rack and Pinion Assembly (Part No.1G-2006)
from
$348.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE¿s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
MOOG – Rack & Pinion Bellows Kit (Part No.K150289)
from
$30.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Cardone – P/S Pump (Part No.M2010901087CAR)
from
$153.30
Cardone Power Steering Pumps are hydraulically tested for proper flow, seal, pressure and output, ensuring like-new performance. The critical components are tested three times, heat, chemical and mechanical bonds keep the high-carbon steel sleeve firmly in place, ensuring exceptional performance. They feature 100 percent computerized and hydraulic testing or proper flow, pressure, leakage and performance.
Product Features:
See More
Product Features:
- 100% computerized hydraulic testing is performed for proper flow, leakage and performance to ensure perfect fit and function
- All critical components (i.e. campacs, spool valves, etc.) are triple tested to ensure product reliability
- All units are built with 100% new seals and o-rings
- Units are supplied with 100% tested and calibrated pressure relief valves
- Shafts are 100% processed to ensure surface finish is within O.E. tolerances
Omega – P/S Pressure Hose (Part No.M2015934698OME)
from
$127.59
P/S Pressure Hose
Cardone – Steering Rack (Part No.M10002419448CAR)
from
$450.28
A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- Protective coating applied to each unit, where applicable, to extend the life of the unit
- 100% performance testing to ensure perfect fit, function and reliable performance
- 100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
- 100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
- Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
- Valve housings, where applicable, have polished micro-finish sleevings for durability
- Built to meet or exceed O.E.M. performance
Motorcraft – Power Steering Pressure Line Assembly (Part No.M2015934698MTR)
from
$272.62
The Motorcraft Power Steering Pressure Line Assembly is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- OES replacement part for your vehicle’s original factory component
- Offering the quality, reliability, and durability of OES
- Manufactured to OES specification for fit, form, and function
Maval – Power Steering Pump, Remanufactured (Part No.M2010398669MAV)
from
$251.29
Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.
Product Features:
See More
Product Features:
- OEM-Quality and Direct Fit replacement
- Components are inspected and cleaned of rust and corrosion.
- Shaft and internal surfaces are inspected, reconditioned and polished.
- Seals and O-rings are replaced with new, OE-equivalent parts.
- Assembled units are 100% functionally tested for leaks and performance.
Motorcraft – P/S Return Hose (Part No.M2016362178MTR)
from
$164.43
P/S Return Hose
Motorcraft – REGULATOR ASY (Part No.WPT-169)
from
$24.99
REGULATOR ASY
Dorman – RACK BELLOW (Part No.541-530)
from
$22.99
RACK BELLOW
Driveworks – Tapered Roller Bearing (Part No.S-LM-29749)
In-Demand Sway Bars for 2011 Mercury Mariners
Select from 16 premium Sway Bars parts for your 2011 Mercury Mariner, with prices ranging from $13.79 to $165.99.
MOOG – Stabilizer Bar Link (Part No.K750571)
from
$56.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Stabilizer Bar Bushing Kit (Part No.K201312)
from
$20.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
MOOG – Stabilizer Bar Link (Part No.K80296)
from
$62.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – Sway Bar Link Kits (Part No.DW-K80296)
from
$24.99
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot with grease relief valve keeps contaminants out
- Performance tested to ensure durability
MOOG – Stabilizer Bar Bushing Kit (Part No.K201311)
from
$13.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Dorman – Rear Sway Bar Bushing Bracket Kit (Part No.928-541)
from
$49.49
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles.
- Reliable fit – precision-engineered to match the design and dimensions of original components.
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rare Parts – Sway Bar Link (Part No.RP22075)
from
$47.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
ACDelco – Advantage Suspension Stabilizer Bar Link (Part No.L1030579207ACD)
from
$69.30
ACDelco Advantage Suspension Stabilizer Bar Links connect the ends of your vehicle’s stabilizer bar near the wheels, and allow the bar to function in controlling body roll. These replacement components contain a forged CNC-machined shell, compressed bushing material, case-hardened studs, and constant-torque pivot joints for high-quality performance, strength, and durability. ACDelco Advantage Suspension Stabilizer Bar Links offer quality at an economical price.
Product Features:
See More
Product Features:
- Undergo impact, wear, and fatigue testing to help ensure quality and durability
- Coated for corrosion resistance and long life
- Greasable design where applicable, for easy maintenance and longevity
- Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life
- Forged CNC-machined shell provides high-quality, precision-made performance and additional strength
- Case-hardened studs with rolled threads for strength and cleanliness
- Heat-treated forging for enhanced part quality and durability
Whiteline – Sway Bar Link (Part No.KLC140-255)
from
$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Product Features:
See More
Product Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Whiteline – Sway Bar Link (Part No.KLC140-295)
from
$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Product Features:
See More
Product Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Whiteline – Sway Bar Link (Part No.W23180)
from
$74.99
Do you have every sway bar link on the shelf? Well you don’t need too, Whiteline have developed a clever cut to length universal sway bar link that has a 10mm ball stud has a working range of 80-320mm c/c. 1 part number covers hundreds of applications.
Product Features:
See More
Product Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Beck/Arnley – Stabilizer End Link (Part No.101-5090)
from
$50.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Corrosion resistant coatings
- Includes components and hardware necessary for a complete replacement
- Hardware functionality matches original design requirements
- Application specific for this vehicle
Carquest Premium – Stabilizer Bar Link (Part No.512-425999)
from
$40.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Carquest Premium – Stabilizer Bar Link (Part No.510-74194)
from
$29.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
CTR – Sway Bar Link (Part No.L1030380683CTR)
from
$27.17
The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Rare Parts – Sway Bar Fr Bush (Part No.RP22623)
from
$24.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Most Sold 2011 Mercury Mariner Tie Rods
Explore our best-selling Mercury parts for the 2011 Mariner among 10 OEM and aftermarket options starting from $36.99.
MOOG – Tie Rod End (Part No.ES800846)
from
$50.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Tie Rod End (Part No.EV800911)
from
$58.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Assembled in the USA
- TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening
Carquest Premium – Tie Rod End (Part No.310-426018)
from
$36.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Carquest Premium – Tie Rod End (Part No.700-426033)
from
$39.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Thread locking compound included.
Beck/Arnley – Tie Rod End (Part No.101-7636)
from
$57.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Ball joint is pre-greased
- Easy access wrench flat allows for the use of a socket for easy installation and removal
- Full ball stud
Rare Parts – Tie Rod End (Part No.RP29279)
from
$70.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Beck/Arnley – Tie Rod End (Part No.101-7663)
from
$61.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Ball joint is pre-greased
- Easy access wrench flat allows for the use of a socket for easy installation and removal
- Full ball stud
Rare Parts – Tie Rod End (Part No.RP29385)
from
$52.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
CTR – Tie Rod End (Part No.M3010335776CTR)
from
$45.43
Tie Rod End
CTR – Tie Rod End (Part No.M3010428521CTR)
from
$44.88
Tie Rod End
Top-Rated Steering and Chassis Parts Brands For Your 2011 Mercury Mariner
Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2011 Mercury Mariners. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Driveworks, and Moog, and more. Steering and Chassis Parts from these brands that fit a 2011 Mariner start at just $4.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Imperial 2011 Mercury Mariner Steering and Chassis Parts
When it comes to maintaining or upgrading your 2011 Mercury Mariner, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 2011 Mercury Mariner. With over 4 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $23.32. Plus, with over 208 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$11.49
$11.49
(27)
“Perfect for my transmission cooler holds it very good in place”
Popular Driveworks 2011 Mercury Mariner Steering and Chassis Parts
Driveworks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2011 Mercury Mariner owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2011 Mariner, Advance Auto Parts carries a full inventory of 6 Driveworks Steering and Chassis Parts. Plus you will be keeping your Mercury in peak condition while saving money because prices on these Driveworks Steering and Chassis Parts range from $4.99 to $49.99, plus, with more than 83 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.
FAQs for 2011 Mercury Mariner Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 2011 Mercury Mariners?
Out of 79 Steering and Chassis Parts that fit 2011 Mercury Mariners, the following parts are the top sellers:
- Sway Bar Link Kits (10194752) – $24.99
- Stabilizer Bar Link (20519916) – $62.99
- Ball Joint (10145181) – $49.99
What’s the price range for 2011 Mercury Mariner Steering and Chassis Parts?
Steering and Chassis Part prices for the 2011 Mercury Mariner start at $4.99 and go up to $497.94 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 2011 Mercury Mariner?
The average price for Steering and Chassis Parts for the 2011 Mercury Mariner is $97.79. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Steering and Chassis Parts for other Mercury Mariner model years?
What are the cheapest Steering and Chassis Parts for my 2011 Mercury Mariner?
The cheapest 2011 Mercury Mariner Steering and Chassis Parts we carry in stock are:
- Taper Bearing Cup (5052521) – $4.99
- Tapered Roller Bearing (10659596) – $8.79
- Mounting Kit System (6014844) – $11.49
- Stabilizer Bar Bushing Kit (11620109) – $13.79
- Camber Bolt Kit (10361686) – $17.99
What are the top-rated Steering and Chassis Parts that fit the 2011 Mercury Mariner?
Out of 1,552 reviews by customers, our 2011 Mercury Mariner Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2011 Mercury Mariner and their top-rated products:
- Sway Bars
- Stabilizer Bar Bushing Kit (11620342) – $20.99
- Stabilizer Bar Link (10616294) – $56.99
- Stabilizer Bar Link (20519916) – $62.99
- Tie Rods
- Stabilizer Bar Bushing Kit (11620342) – $20.99
- Stabilizer Bar Link (10616294) – $56.99
- Stabilizer Bar Link (20519916) – $62.99
What types of Steering and Chassis Parts do you sell for my 2011 Mercury Mariner?
As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2011 Mercury Mariner:
Can I get help with 2011 Mercury Mariner Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Steering and Chassis Parts and more.
What is your return policy for Mercury Mariner Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Mercury Mariner Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
