2011 Lexus LX570 Belts and Hoses
More 2011 Lexus LX570 Belts and Hoses Categories
If you’re looking for an original Belts and Hoses replacement for a 2011 Lexus LX570, you can search through our selection below. You’ll also find aftermarket and OEM Belts and Hoses to meet your needs.
Essential 2011 Lexus LX570 Belts and Hoses
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 1/4 Inch Length (Part No.87651)
from
$10.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Gates – Premium Molded Coolant Hose (Part No.20338)
from
$9.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
INA – Accessory Belt Tensioner Assembly (Part No.G60011367720INA)
from
$107.72
The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- High quality precision spring tension assembly
- OE specified bearing and pulley assembly
- Durable long life performance
Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89378)
from
$62.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slip
Product Features:
See More
Product Features:
- Endures the toughest conditions while promoting quieter performance and longer life
- Features a steel pivot tube on specific designs for enhanced stability
- Built to outperform and outlast competitive OE parts
- This tensioner is another Dayco product proudly made in the USA
Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999202A)
from
$61.99
This Litens tensioner is manufactured by Litens for Toyota/Lexus 4.7L/5.7L Gasoline and Flex Fuel Engines. This Litens aftermarket part meets all original equipment form, fit, and function specifications. Like the original equipment part, this tensioner design include a heavy-duty steel pulley, as well as an internal (engine tuned) damping system. Common O.E. reference numbers include: 166200S010 Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._
Product Features:
See More
Product Features:
- Manufactured by one of the world’s largest original equipment tensioner suppliers to ensure proper form, fit, and performance
- Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
- Installation instructions included.
- Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
- Professional Mechanics will change this tensioner in approx. 1 hour.
- Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d
Gates – V-Ribbed Serpentine Belt: 95.375" Long, 8 Rib Count, Exact Fit (Part No.K080948)
from
$78.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Meets or exceeds all specifications from the Original Equipment Manufacturer.
- Designed for small diameter pulleys, backside idlers, and for use with (or without) automatic tensioners.
- Special belt constructions eliminate belt noise, reduce tension loss, and solve problem drive applications.
- Utilizes advanced materials like Aramid Fiber found in bullet-proof vests and crack and heat resistant EPDM materials.
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Driveworks – Poly Rib Belt HD Serpentine Belt; 95.08 Long, 8 Rib Count, Heavy Duty (Part No.950K8)
from
$33.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 95.375" Long, 8 Rib Count, Exact Fit (Part No.K080948HD)
from
$94.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Heavy-duty construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- Problem solver designed for the toughest applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Engineered to save your fleet money and reduce downtime
- Tensioner Replacement is Recommended (if equipped)
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.56" Diameter (Part No.C70352)
from
$12.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot) (Part No.28411)
from
$1.49
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Dayco – Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set (Part No.D80950K1)
from
$148.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.
Product Features:
See More
Product Features:
- Custom engineered to cover 35 million problem drive vehicles in operation
- Designed as an improvement over OE to address problematic drive systems
- Features a specially designed serpentine belt with specific compounds that mitigate noise
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 3.25" Long, .63" Diameter (Part No.A70001)
from
$10.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.5" Inside Diameter (Sold by foot) (Part No.28410)
from
$3.29
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Gates – Premium Molded Heater Hose (Part No.19183)
from
$21.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.44" Diameter (Part No.E73155)
from
$35.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 76 mm Diameter, 37 mm Smooth (Part No.89016)
from
$25.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 56 mm Diameter (Part No.900247A)
from
$113.99
This pulley is supplied by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material and tolerances, specifications and meets performance and durability requirements. Fits Toyota/Lexus applications Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._
Product Features:
See More
Product Features:
- Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys
- Heavy Duty Steel Pulley
- Precision steel stamping with close tolerance ball bearing pocket.
- Electro-deposited coating (e-coat) for superior corrosion resistance.
- Running surface designed and engineered for proper belt tracking.
Dayco – Serpentine Idler/Tensioner Pulley; Steel, 55mm Dia., 36mm Width, 8 Grooves (Part No.89502)
from
$57.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Bando – Multi Rib (Serpentine) Belt (Part No.W1000423538BAN)
from
$43.41
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
Popular 2011 Lexus LX570 Belts and Hoses Categories
2011 Lexus LX570 Belts and Hoses
You count on your 2011 Lexus LX570 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 17 Belts and Hoses ranging in price from $1.49 to $148.99, you’re sure to find everything you need for your 2011 Lexus LX570.
Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 6 different brands like Dayco, Driveworks, and Gates. 2011 Lexus LX570 Belts and Hoses start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 114 extensive product reviews on 2011 Lexus LX570 Belts and Hoses.
Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 2011 Lexus LX570 below to get started!
Top-Rated Belts and Hoses Brands For Your 2011 Lexus LX570
Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Lexus LX570 running right for years to come. In our inventory you’ll find brands like Dayco, Driveworks, Gates, and even more.
Popular Dayco Belts and Hoses
You’ll find popular Dayco brand products across Belt Tensioners and Pulleys. All are waiting to get your 2011 Lexus LX570 back on the road. Some of the top-rated Dayco products in these categories are:
from
$62.99
(8)
Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts
Belt Tensioner Assemblies
from
$57.99
(3)
Serpentine Idler/Tensioner Pulley; Steel, 55mm Dia., 36mm Width, 8 Grooves
Idler Pulleys
from
$63.99
(25)
Poly Rib Belt HD Serpentine Belt; 95.08 Long, 8 Rib Count, Heavy Duty
Serpentine Belts
Top-Rated Belts and Hoses
If are what you’re looking for, our inventory holds plenty. We stock brand Belts and Hoses for your 2011 Lexus LX570, and some of our most reviewed parts include:
from
$25.99
(75)
Serpentine Idler/Tensioner Pulley; Direct Fit, 76 mm Diameter, 37 mm Smooth
Idler Pulleys
FAQs for 2011 Lexus LX570 Belts and Hoses
What are the most purchased Belts and Hoses for the 2011 Lexus LX570?
Out of 17 Belts and Hoses for the 2011 Lexus LX570, the most popular in our inventory are:
from
$33.49
(3)
Poly Rib Belt HD Serpentine Belt; 95.08 Long, 8 Rib Count, Heavy Duty
Serpentine Belts
from
$148.99
This product is not rated
Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set
Serpentine Belt Drive Component Kits
from
$94.99
This product is not rated
V-Ribbed (Heavy Duty) Serpentine Belt: 95.375" Long, 8 Rib Count, Exact Fit
Serpentine Belts
