2011 Lexus CT200h Wheels and Tires
More 2011 Lexus CT200h Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 2011 Lexus CT200h, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 2011 Lexus CT200h Wheels and Tires
Carquest Premium – Hub Assembly with Wheel Bearing (Part No.91-481001)
from
$202.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly (Part No.512547)
from
$291.99
Product Features:
See More
- Innovative roll form design ensures consistent and optimal preload.
- Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
- Engineered to overcome problems and deliver smooth, reliable performance.
- MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
McGard – Chrome Cone Seat Wheel Installation Kit for 5 Lug Vehicles (M12 x 1.5 Thread Size) (Part No.84557)
from
$94.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Set of 16 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
McGard – Black SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65557BK)
from
$199.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
Koyo – Wheel Hub Assembly (Part No.K7001439582KOY)
from
$347.94
Koyo designs, manufacturers and supplies a wide range of hubs and bearings to the world’s leading automotive manufacturers. Easy and reliable preload settings and include a simple mounting process with no spacer required. Hub bearings utilize an integral high-performance seal and feature a compact design with no grease packing required.
Product Features:
See More
Product Features:
- No need for pre-load adjustment at assembly
- Compact and lightweight
- Minimizes axial space requirements
- No need for lubrication replenishment Increased bearing life
- Equivalent to special re-melting steel GTS (Greater Toughness Steel Bearings)
- Increased durability and matrix strength by controlling alloy element
- High resistance against hardness reduction by tempering
- Controlled alloy element
Driveworks – Wheel Bearing and Hub Assembly: 5 Studs (Part No.NT513287)
from
$109.99
WJB Automotive wheel hub assemblies are made with high precision through state-of-the-art technology and manufactured with strict quality-control criteria. Every wheel hub assembly is specifically designed to fit the designated applications and may be used as a direct replacement for the original part. Each part is engineered using OE data and measurements to ensure fitment, performance, and longevity.
Product Features:
See More
Product Features:
- Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
- WJB Automotive wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
- Reinforced seal design material allows for optimal performance in harsh environments.
- WJB Automotive wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
- Where applicable, pre-installed speed sensors will automatically sync to the vehicle’s anti-lock braking system upon successful installation and provide accurate speed-reading data.
- Brand may vary by location
Schrader – TPMS Sensor Service Kit (Part No.20018)
from
$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
McGard – Chrome Bulge Cone Seat Style Lug Nut (M12 x 1.5 Thread Size) – Box of 100 Lug Nuts (Part No.69412)
from
$414.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels. Tough Nuts are designed and built for the real world, because life is tough.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Bulk box of 100.
McGard – Black Cone Seat SplineDrive Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.65357BK)
from
$44.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Requires 65100 Or 65300 Installation Tool sold separately
Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)
from
$41.99
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- 100% ID clone-able with no relearn required
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – Adjustable Angle 1-Sensor Rubber (Part No.300020)
from
$41.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Maximum Signal Strength, Battery Reliability.
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- Combined Frequency – 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99 Percent of OE Sensors
- Meets SAE Standards J1205 and J1206
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Xtra Seal – Parts Kit For Lexus/Toy (Part No.17-20216AK)
from
$29.49
Parts Kit For Lexus/Toy
Dill Air Control – TPMS Service Kit: Purple Color Coded Service Kit For Select Models, 25 Piece (Part No.1100K)
from
$3.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- Purple Kit for Honda, Lexus, Pontiac, Scion, & Toyota
Dorman – Wheel Lug Nut: M12-1.50 Thread, Flanged, Cragar SST Mag, 2.25" Length, Chrome (Sold by each) (Part No.611-184)
from
$3.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
McGard – Chrome Bulge Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64012)
from
$26.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Chrome Plated Valve Stem (Part No.VS-925-C)
from
$8.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, & tools.
Product Features:
See More
Product Features:
- Chrome clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
- 0.453 in. rim hole compatibility
- 200 PSI maximum cold inflation pressure
Schrader – TPMS Sensor Service Kit (Part No.20008)
from
$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Dorman – Pik-a-Nut – Wheel Stud : Serrated Stud, M12-1.50 Thread Size, RHT, 1 Pack (Part No.98485.1)
from
$1.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – M12-1.50 Serrated Wheel Stud – 14.20mm Knurl, 40mm Length (Part No.610-266)
from
$1.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)
from
$23.99
Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
- DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)
from
$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.
Product Features:
See More
Product Features:
- MX-Sensor Components
- 4 Metal Valves
- 4 Rubber Valves
- Rubber Gasket (2×10 pcs)
- Screw Nut (2×10 pcs)
- Washer (2×10 pcs)
- Metal Valve Cap (2X10 pcs)
- Rubber Valve Cap (2X10 pcs)
- Valve Core (2X10 pcs)
McGard – Chrome Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24157)
from
$34.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
McGard – Cone Seat- Under Hub Cap Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24012)
from
$39.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use under wheel covers, center caps and hub caps.
- Can also be used for exposed applications with optional (70005) black or (70006) chrome caps.
McGard – Black Tuner Style Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.25357)
from
$71.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- For use on “Tuner” wheels or wheels with very small lug nut holes.
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For aluminum wheels only.
Huf North America – Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 315MHz (Part No.UVS3041)
from
$47.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- 315 MHz TPMS Universal with rubber valve
- Programmable – Only take 3 seconds to configure to specific application
- Always up-to-date with the new programming function via the TPMS diagnostic tool
- Covers multiple applications with one OE equivalent sensor
- Reprogrammable and Copy Clone Capable
- Have WAL technology for locating tire positon
- Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
REDI-Sensor – REDI-Sensor Metal Clamp-in Stem 315 MHz — 1 Sensor (Part No.SE10007)
from
$53.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.
Product Features:
See More
Product Features:
- Metal clamp-in stem.
- Works with most major TPMS Scan tools
- Reduces SKUs
- OE Designed and Validated
- Advance anodization of valve stems and hex nuts
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – Adjustable Angle Programmable Universal TPMS Sensor Metal – 315MHz and 433MHz (Part No.300030)
from
$43.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Maximum Signal Strength, Battery Reliability.
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- Combined Frequency – 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99 Percent of OE Sensors
- Meets SAE Standards J1205 and J1206
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – 315/433MHz Universal Sensor (Part No.UVS7050)
from
$42.99
Professional installation is strongly suggested
Product Features:
See More
Product Features:
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Popular 2011 Lexus CT200h Wheels and Tires Categories
2011 Lexus CT200h Wheels and Tires
You count on your 2011 Lexus CT200h to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 76 Wheels and Tires ranging in price from $1.99 to $7,321.99, you’re sure to find everything you need for your 2011 Lexus CT200h.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 14 different brands like Dorman, Autel, and McGard. 2011 Lexus CT200h Wheels and Tires start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 107 extensive product reviews on 2011 Lexus CT200h Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are VDO Metal Clamp-in Stem REDI-Sensor with 3.1 stars and Tire Pressure Monitoring System (TPMS) Sensor with 3.9 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2011 Lexus CT200h below to get started!
Top-Rated Wheels and Tires Brands For Your 2011 Lexus CT200h
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Lexus CT200h running right for years to come. In our inventory you’ll find brands like Dorman, Autel, McGard, and even more.
Popular Dill Air Control Wheels and Tires
You’ll find popular Dill Air Control brand products across TPMS Sensor Kits. All are waiting to get your 2011 Lexus CT200h back on the road. Some of the top-rated Dill Air Control products in these categories are:
from
$3.49
(7)
TPMS Service Kit: Purple Color Coded Service Kit For Select Models, 25 Piece
Tire Pressure Sensor Service Kits
from
$5.99
(4)
TPMS Service Kit: Diamond Stripe Color Coded Service Kit, 25 Piece
Tire Pressure Sensor Service Kits
from
$8.99
(1)
Clamp-In TPMS Service Kit: Metal, 0.453 Inch Chrome Plated Valve Stem
Tire Pressure Sensor Valves
Top-Rated Dorman – Pik-a-Nut Wheels and Tires
If Dorman – Pik-a-Nut are what you’re looking for, our inventory holds plenty. We stock Dorman – Pik-a-Nut brand Wheels and Tires for your 2011 Lexus CT200h, and some of our most reviewed Dorman – Pik-a-Nut parts include:
from
$5.99
(12)
Wheel Lug Nut: M12-1.50 Thread, Flanged, Mag, 1.457" Length, Chrome, 1 Pack
Wheel Lug Nuts
FAQs for 2011 Lexus CT200h Wheels and Tires
What are the most purchased Wheels and Tires for the 2011 Lexus CT200h?
Out of 76 Wheels and Tires for the 2011 Lexus CT200h, the most popular in our inventory are:
from
$1.99
This product is not rated
M12-1.50 Serrated Wheel Stud – 14.20mm Knurl, 40mm Length
Wheel Studs
from
$5.29
This product is not rated
Wheel Lug Nut: M12-1.50 Thread, Flanged, Acorn, 1.457" Length, Chrome (Sold by each)
Wheel Lug Nuts
What are the top-rated 2011 Lexus CT200h Wheels and Tires?
Top-rated Wheels and Tires for your 2011 Lexus CT200h based on customer reviews/ratings are:
