2011 Lexus CT200h Cooling and Climate Controls
Find Your Specific 2011 Lexus CT200h Cooling and Climate Controls
Below you will find various in-demand Lexus Cooling and Climate Controls, components and accessories for your 2011 CT200h. Advance Auto Parts has popular CT200h parts like Heating Parts, Engine Cooling Parts, Blower Motor and Related Products and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other CT200h model years including
2012,
2013,
2014,
2015,
2016,
2017 and more. Select a category of 2011 Lexus CT200h Cooling and Climate Controls below and start saving instantly.
Popular 2011 Lexus CT200h Cooling and Climate Controls Categories
Essential Cooling and Climate Controls for 2011 Lexus CT200hs
Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)
from
$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
KAI – A/C Condenser (Part No.CND3790)
from
$73.99
New Platinum Pro A/C Condenser, With Receiver Drier
Product Features:
See More
Product Features:
- With Receiver Drier, Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Engine Drive Motor Inverter Cooler Water Pump: New, Plastic Housing (Part No.T1217)
from
$265.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- Built to meet or exceed OE fit, form and function
- All components necessary for installation are supplied with pump
- 100% tested for reliable performance
- Follow all enclosed instructions to maximize pump life and validate warranty
Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713790)
from
$254.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
- This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
KAI – A/C Service Valve (Part No.FTT010751)
from
$10.99
New Standard Replacement A/C Service Cap And Valve Kit, MT2909
Product Features:
See More
Product Features:
- MT2909
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
DENSO – First Time Fit Drier Desiccant Element (Part No.R1043393863ND)
from
$46.28
The Denso Drier Desiccant Element is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
KAI – Cooling Fan Assembly (Part No.TO3115159)
from
$189.99
New Platinum Pro Radiator And Condenser Fan Assembly, 1.8 Liter L4 Hybrid
Product Features:
See More
Product Features:
- 1.8 Liter L4 Hybrid, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Radiator Support Tie Bar (Part No.TO1225301)
from
$32.99
New Standard Replacement Radiator Support Lower Tie Bar
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Santech – A/C Servo (Part No.R20401522466SII)
from
$165.13
A/C Servo
Carquest Premium – Multi Purpose Relay (Part No.RAA1733)
from
$16.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Santech – A/C Pressure Switch (Part No.R1054261110SII)
from
$44.70
A/C Pressure Switch
Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest Premium – A/C Evaporator Parallel Flow (Part No.T64011)
from
$113.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
- The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
- The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
- The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
- O-Rings and gaskets necessary for installation are included.
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10254)
from
$9.49
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
AISIN – Inverter Cooler Water Pump (Part No.G7010436120ASC)
from
$306.71
Inverter Cooler Water Pump
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA3846)
from
$252.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better than OE provide durability and long service life
- All ABS sensors are tested for proper fit, form, and function
- Wire diameter and sheathing same or larger than OE to ensure product quality
- Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
- Includes all necessary brackets and hardware
Metrix – Inverter Coolant Pum (Part No.G7010402245MTX)
from
$346.55
Inverter Coolant Pum
DENSO – First Time Fit Relay (Part No.P2020194560ND)
from
$25.84
An electrical relay is sort of a magical device: it takes a small electrical signal and uses it to manage a much more powerful current, permitting electrical systems to be both lighter and more dependable at the same time. DENSO has supplied quality relays to the OE automotive world for over 60 years. The very same performance and dependability are available across the replacement aftermarket with DENSO First Time Fit® relays. Engineered to meet the most stringent automaker standards for shock resistance, arcing, and thermal protection, DENSO auto relays feature the lowest return rates in the industry; that equals value for car owners and repair facilities alike
Product Features:
See More
Product Features:
- Lead-free, solderless construction prevents heat shock and arcing
- Controlled contact force, self-adjusting air gap increase longevity of the internal parts
- Industry-standard packaging and footprint
- Low heat generation
- Reduced electrical loads
- Built to last
Felpro – Engine Coolant Thermostat Housing Gasket (Part No.36007)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)
from
$17.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Motorad – Integrated Thermostat Housing: With Seal, 180 Degrees (Part No.700-180)
from
$42.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Blower Motor: With Wheel (Part No.76504)
from
$219.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
- Functionally Equivalent to OE Design
- Magnetic size and properties compare or exceed OEM
- Hermetically Sealed & Thermally Protected Electronics
Dorman – Toyota Bumper Retainer (Part No.963-634D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Carquest Premium – Heater Core (Part No.910511)
from
$165.99
Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Product Features:
See More
Product Features:
- All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
- Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
- Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
- Designed to keep your A/C system in top shape and built to provide long-lasting service
- Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
- Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
Carquest Premium – Multi Purpose Relay (Part No.RAA1522)
from
$29.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
DENSO – Engine Coolant Temperature Sensor (Part No.193-1000)
from
$82.99
DENSO’s engine coolant temperatures sensors are manufactured to the strictest OE standards resulting in superior efficiency. OE quality with precise sensing elements. Exact fit which controls fuel injection ignition timing and transmission shifting.
Product Features:
See More
Product Features:
- OE technology adapted for the aftermarket
- Reduces emissions, increased performance
- Delivers the highest reliability and detection accuracy
Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39274)
from
$30.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Upgrade your 2011 Lexus CT200h with Top-Quality Cooling and Climate Controls
When it comes to maintaining or upgrading your 2011 Lexus CT200h, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lexus or enhancing its overall performance, Cooling and Climate Controls are key to keeping your CT200h functioning at its best. At Advance Auto Parts, we offer a wide selection of 64 Cooling and Climate Controls for the 2011 Lexus CT200h, designed to meet your needs without breaking the bank.
From
Heating Part
replacements to
Engine Cooling Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2011 Lexus CT200h at great prices.
Our Cooling and Climate Controls inventory for this model
ranges from just $4.49 to $413.99, with
an average price of $105.76.
Our 64 Cooling and Climate Controls in stock come from 23 trusted brands, so you’re sure to find the right part for your 2011 Lexus CT200h without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Lexus CT200h, we stock popular OEM and aftermarket Cooling and Climate Controls from top names
like Permatex, FELPRO, Factory Air, and more.
Permatex Cooling and Climate Controls
start at just $6.99 and boast an impressive 5 stars average rating from customers.
FELPRO and Factory Air also bring quality to the table, with Cooling and Climate Controls available starting at $5.49, and at an average 5 stars rating.
With 432 customer reviews and counting, our 2011 Lexus CT200h Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2011 Lexus CT200h is always ready to roll. We’re committed to providing you with everything you need to keep your CT200h in top shape, all in one place.
Start shopping confidently below for your 2011 Lexus CT200h!
Best-Selling Heating Parts for 2011 Lexus CT200hs
Enhance the driving experience in your Lexus with 4 quality Heating Part components, starting at $64.99.
Carquest Premium – Heater Core (Part No.910511)
from
$165.99
Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Product Features:
See More
Product Features:
- All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
- Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
- Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
- Designed to keep your A/C system in top shape and built to provide long-lasting service
- Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
- Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
Factory Air – System Mounted Pressure Transducer (Part No.37317)
from
$64.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Contains gaskets, O-rings, or seals to properly replace the product
- Color coded for easy identification
- Zinc coated to resist corrosion
- Vehicle specific applications
KAI – HVA/C Heater Core (Part No.HTR010625)
from
$129.99
New Standard Replacement Heater Core
Product Features:
See More
Product Features:
- Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Nissens – Heater Core (Part No.R3000320407NSS)
from
$170.55
Heater Core
Most Popular 2011 Lexus CT200h Engine Cooling Parts
Customize your Lexus with 35 Engine Cooling Parts products
like Thermostats,
Radiators, and
Water Pumps, all
priced under $413.99.
Felpro – Engine Coolant Thermostat Seal (Part No.35445)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Dorman – Toyota Bumper Retainer (Part No.963-634D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Motorad – Integrated Thermostat Housing: With Seal, 180 Degrees (Part No.700-180)
from
$42.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Engine Drive Motor Inverter Cooler Water Pump: New, Plastic Housing (Part No.T1217)
from
$265.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- Built to meet or exceed OE fit, form and function
- All components necessary for installation are supplied with pump
- 100% tested for reliable performance
- Follow all enclosed instructions to maximize pump life and validate warranty
AISIN – High-Performance Electric Water Pump for Optimal Engine Cooling (Part No.G3000442502ASC)
from
$391.60
The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- Advanced technological design.
- Carbon ceramic sealing.
- Resistant to corrosion.
- Optimum cooling performance and longevity.
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Factory Air – Coolant Temp Sensor Switch (Part No.36424)
from
$34.05
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Color coded for easy identification
- Zinc coated terminal to resist corrosion
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10254)
from
$9.49
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Engine Electric Water Pump: New, Aluminum Housing (Part No.T2324)
from
$413.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
DENSO – First Time Fit Relay (Part No.P2020194560ND)
from
$25.84
An electrical relay is sort of a magical device: it takes a small electrical signal and uses it to manage a much more powerful current, permitting electrical systems to be both lighter and more dependable at the same time. DENSO has supplied quality relays to the OE automotive world for over 60 years. The very same performance and dependability are available across the replacement aftermarket with DENSO First Time Fit® relays. Engineered to meet the most stringent automaker standards for shock resistance, arcing, and thermal protection, DENSO auto relays feature the lowest return rates in the industry; that equals value for car owners and repair facilities alike
Product Features:
See More
Product Features:
- Lead-free, solderless construction prevents heat shock and arcing
- Controlled contact force, self-adjusting air gap increase longevity of the internal parts
- Industry-standard packaging and footprint
- Low heat generation
- Reduced electrical loads
- Built to last
Carquest Premium – Radiator (Part No.813119)
from
$164.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Original Equipment – Expansion Tank Cap (Part No.G10402381532OEA)
from
$18.49
Expansion Tank Cap
KAI – Radiator Support Tie Bar (Part No.TO1225301)
from
$32.99
New Standard Replacement Radiator Support Lower Tie Bar
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Sankei Switches – Engine Coolant Temperature Sensor (Part No.C6020243726SAK)
from
$33.13
The Sankei Switches Engine Coolant Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Felpro – Engine Water Pump Gasket (Part No.36010)
from
$11.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
DENSO – First Time Fit Radiator (Part No.G1000466892ND)
from
$215.73
DENSO is a leading supplier of radiators to OE car makers around the world. Manufacturers rely on our quality and innovation to remain on the leading edge of engine cooling technology. Our OE experience and know-how ensure our products provide unmatched performance, reliability and fitment. Radiator performance is essential for proper engine cooling and function. DENSO’s radiator configurations, tanks, fin pitch, core dimensions and materials meet OE manufacturer’s rigid standards. All DENSO radiators pass our strict durability and function tests. As the result, our radiators deliver reliable performance even under the most demanding conditions. Radiator types: Plastic tank with aluminum core. Plastic tank with copper core. Cross-flow and down-flow configurations. DENSO is known for the unsurpassed quality of its products. Plastic, copper or aluminum components: it doesn’t matter. Our DENSO radiators are dependable, lightweight and made to last. An investment in a DENSO radiator will pay dividends in the long run. Radiators can fail causing leaks or inefficient cooling. This can lead to your engine to run hotter which in turn creates excess wear and tear on the engine. DENSO radiators are designed with our First Time Fit® philosophy in mind. You get radiators that drop in easily without the need for adjustment, brackets or modification of any kind. Our radiators are precision built to provide the right part, the right fit, the first time.
Product Features:
See More
Product Features:
- Fin Pitch – Superior fin waves provide a higher heat transfer.
- Flow Configuration – Available in cross-flow and down-flow configurations.
- Aluminum or Copper Core – Thin-tube construction assures maximum cooling efficiency.
Carquest Premium – Radiator (Part No.813427)
from
$373.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Metrix – Inverter Coolant Pum (Part No.G7010402245MTX)
from
$346.55
Inverter Coolant Pum
AISIN – Inverter Cooler Water Pump (Part No.G7010436120ASC)
from
$306.71
Inverter Cooler Water Pump
Dorman – Non-Pressurized Coolant Reservoir: Clear, Metal; Plastic, Original Equipment Replacement (Part No.603-782)
from
$221.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
- Ideal solution – engineered for a seamless installation.
- Durable construction – manufactured from quality materials to withstand underhood heat and vibration
- Trustworthy design – backed by 100 years of automotive aftermarket experience
KAI – Cooling Fan Assembly (Part No.TO3115159)
from
$189.99
New Platinum Pro Radiator And Condenser Fan Assembly, 1.8 Liter L4 Hybrid
Product Features:
See More
Product Features:
- 1.8 Liter L4 Hybrid, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Flex A Lite – Trimline Straight Blade Electric Fan (Part No.114)
from
$125.99
Trimline Straight Blade Electric Fan
KAI – Motor Inverter Cooler (Part No.INV13427)
from
$117.99
New Platinum Pro Inverter Cooler
Product Features:
See More
Product Features:
- Made Of Plastic and Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Worldpac – RADIATOR (Part No.G1000401899KCS)
from
$87.99
RADIATOR
DENSO – Engine Coolant Temperature Sensor (Part No.193-1000)
from
$82.99
DENSO’s engine coolant temperatures sensors are manufactured to the strictest OE standards resulting in superior efficiency. OE quality with precise sensing elements. Exact fit which controls fuel injection ignition timing and transmission shifting.
Product Features:
See More
Product Features:
- OE technology adapted for the aftermarket
- Reduces emissions, increased performance
- Delivers the highest reliability and detection accuracy
NTC – Thermostat Assembly (Part No.G4002411935NTC)
from
$58.12
NTC offers a full line of thermostats to replace your original equipment thermostat. This includes a wide variety of temperature ranges all designed to operate within OEM specifications.
Product Features:
See More
Product Features:
- Strict quality control, and functional testing
- Self-cleaning and self-aligning thermostat valve
- Original equipment design provides exact fit and performance
- Precise sealing edges reduce leakage and premature cooling
- Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
- Stainless steel assembly and springs are engineered for long life
Autopart International Inc – Thermostat Assembly (Part No.G40021991819API)
from
$50.76
Thermostat Assembly
Carquest Premium – Thermostat (Part No.49348)
from
$43.49
Original equipment design provides exact fit and performance.
Product Features:
See More
Product Features:
- Precise fitting sealing edges prevent leakage and premature cooling.
- Self-cleaning and self-aligning thermostat valve.
- Stainless steel assembly and springs are engineered for long life and smooth performance.
Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)
from
$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Victor Reinz – Engine Coolant Thermostat Housing Gasket (Part No.71-16031-00)
from
$17.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Elring – Water Pump Gasket (Part No.G3040477176ELR)
from
$10.96
Water Pump Gasket
Felpro – Engine Coolant Outlet Gasket (Part No.35866)
from
$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Felpro – Engine Coolant Thermostat Housing Gasket (Part No.36007)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
MAHLE Original – THERMOSTAT HOUSG GSK (Part No.C32454)
from
$6.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Top Picks for 2011 Lexus CT200h Blower Motor and Related Products
Upgrade Lexus CT200hs with top-quality Blower Motor and Related Products parts, including 3 OEM and aftermarket selections for your 2011 model.
Carquest Premium – Multi Purpose Relay (Part No.RAA1522)
from
$29.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Worldpac – BLOWER MOTOR (Part No.R2031421037ND)
from
$367.42
BLOWER MOTOR
Carquest Premium – Blower Motor: With Wheel (Part No.76504)
from
$219.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
- Functionally Equivalent to OE Design
- Magnetic size and properties compare or exceed OEM
- Hermetically Sealed & Thermally Protected Electronics
In-Demand Blend Doors for 2011 Lexus CT200hs
Select from 1 premium Blend Doors parts for your 2011 Lexus CT200h.
Santech – A/C Servo (Part No.R20401522466SII)
from
$165.13
A/C Servo
Most Sold 2011 Lexus CT200h Air Conditioning Parts
Explore our best-selling Lexus parts for the 2011 CT200h among 20 OEM and aftermarket options starting from $9.99.
Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39274)
from
$30.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)
from
$17.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Carquest Premium – Multi Purpose Relay (Part No.RAA1733)
from
$16.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Driveworks – Electrical Relay (Part No.83312)
from
$14.79
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
KAI – A/C Service Valve (Part No.FTT010751)
from
$10.99
New Standard Replacement A/C Service Cap And Valve Kit, MT2909
Product Features:
See More
Product Features:
- MT2909
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Multi Purpose Relay (Part No.RAA1505)
from
$16.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Connector (Part No.PTA1233)
from
$26.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
DENSO – First Time Fit Drier Desiccant Element (Part No.R1043393863ND)
from
$46.28
The Denso Drier Desiccant Element is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
KAI – A/C Condenser (Part No.CND3790)
from
$73.99
New Platinum Pro A/C Condenser, With Receiver Drier
Product Features:
See More
Product Features:
- With Receiver Drier, Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metrix – Expansion Valve (Part No.R1045260963MTX)
from
$48.86
METRIX expansion valves are manufactured to OE specifications and provide durability and optimum performance. The Thermostatic valves are engineered using the latest OEM designs and are made with the highest quality brass and copper. METRIX expansion blocks are machined from a single block of high grade aluminum or brass and are manufactured application specific according to OE size, shape and color.
Product Features:
See More
Product Features:
- OE-Quality – Exact Fit
- Tonnage and superheat are rated to exact OEM specifications
- Utilizes the factory style fittings and connectors
- Compatible with R12 and R134a refrigerant
- The power valve is seasoned prior to assembly and is fully function tested
- Designed and manufactured to OE specifications
- Includes all necessary fitment components. When required units will have sealing washers and/or O-Rings. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C componen
Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1745)
from
$83.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
Carquest Premium – A/C Evaporator Parallel Flow (Part No.T64011)
from
$113.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
- The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
- The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
- The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
- O-Rings and gaskets necessary for installation are included.
DENSO – First Time Fit A/C Conr (Part No.R1030688071ND)
from
$294.18
Like all DENSO First Time Fit® A/C components, our condensers are designed and manufactured to integrate seamlessly with the vehicle’s original air conditioning system. DENSO condensers match up to OE condensers at every benchmark. Multiflow, subcooling, and the latest Ssrpentine condenser styles are offered to provide the optimum configuration for each application. Premium aluminum construction improves reliability, resisting corrosion to avoid expensive system leaks, while the superior fin wave design offers higher heat transfer and maximum refrigerant condensation. Heat exchanger cores are specially designed to shed airborne material buildup, allowing the A/C system to operate at peak efficiency with minimal maintenance, assuring years of trouble-free service.
Product Features:
See More
Product Features:
- Zinc diffusion layer improves corrosion resistance
- Unique fin design to minimize airflow blockage
- High performance design reduces the required compressor power
- System Efficiency: Superior fin waves provide a higher heat transfer coefficient and full condensation.
- Engineered to Perfection: OE quality engineered for unparalleled performance
- Exact Fit: Condensers install with speed and ease
- Reduces required compressor power, resulting improved fuel economy
- Restores A/C performance to as-new condition
- First Time Fit® assures bolt-in replacement; no brackets or adapters
- Greater Durability: Pure aluminum construction provides greater resistance for corrosion
Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713790)
from
$254.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
- This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA3846)
from
$252.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better than OE provide durability and long service life
- All ABS sensors are tested for proper fit, form, and function
- Wire diameter and sheathing same or larger than OE to ensure product quality
- Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
- Includes all necessary brackets and hardware
Koyo Cooling – Koyo Cooling A/C Condenser (Part No.R1030338477KCS)
from
$159.21
Koyo engineers design the A/C Condensers to meet the demanding OE specifications, offering a true plug and play installation: No drilling, cutting, relocating, or stretching to get our radiators to fit properly.
Product Features:
See More
Product Features:
- Japanese Engineered, OE Equivalent Quality
- Meet or exceed OEM specifications.
- Utilizes the factory style mounts, connectors and fittings.
- Compatible with R12 and R134a refrigerant.
- Applicable gaskets and O-rings supplied with each part.
DENSO – A/C Expansion Valve (Part No.R1045321193ND)
from
$84.78
A/C Expansion Valve
Santech – A/C Pressure Switch (Part No.R1054261110SII)
from
$44.70
A/C Pressure Switch
Carquest Premium – A/C Desiccant Bag Kit (Part No.T83261)
from
$18.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Metrix – Drier Desiccant Element (Part No.R1043187264MTX)
from
$9.99
Drier Desiccant Element
Top-Rated Cooling and Climate Controls Brands For Your 2011 Lexus CT200h
Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2011 Lexus CT200hs. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, FELPRO, and Factory Air, and more. Cooling and Climate Controls from these brands that fit a 2011 CT200h start at just $5.49 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.
Popular Permatex 2011 Lexus CT200h Cooling and Climate Controls
When it comes to maintaining or upgrading your 2011 Lexus CT200h, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2011 Lexus CT200h. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$26.99
$26.99
(7)
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
“it worked great,thank you marv and your crew.”
Popular FELPRO 2011 Lexus CT200h Cooling and Climate Controls
FELPRO auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2011 Lexus CT200h owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 2011 CT200h, Advance Auto Parts carries a full inventory of 4 FELPRO Cooling and Climate Controls. Plus you will be keeping your Lexus in peak condition while saving money because prices on these FELPRO Cooling and Climate Controls range from $5.49 to $11.29, plus, with more than 76 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.
FAQs for 2011 Lexus CT200h Cooling and Climate Controls
Which Cooling and Climate Controls are best-sellers for 2011 Lexus CT200hs?
Out of 64 Cooling and Climate Controls that fit 2011 Lexus CT200hs, the following parts are the top sellers:
- Engine Coolant Thermostat Seal (5181607) – $5.49
- Cap & Valve A/C System Seal Kit (15890310) – $17.99
- Multi Purpose Relay (12459935) – $16.99
What’s the price range for 2011 Lexus CT200h Cooling and Climate Controls?
Cooling and Climate Control prices for the 2011 Lexus CT200h start at $4.49 and go up to $413.99 for the most premium parts.
What’s the average price of a Cooling and Climate Control for a 2011 Lexus CT200h?
The average price for Cooling and Climate Controls for the 2011 Lexus CT200h is $105.76. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Cooling and Climate Controls for other Lexus CT200h model years?
What are the cheapest Cooling and Climate Controls for my 2011 Lexus CT200h?
The cheapest 2011 Lexus CT200h Cooling and Climate Controls we carry in stock are:
- Toyota Bumper Retainer (11910688) – $4.49
- Engine Coolant Thermostat Seal (5181607) – $5.49
- THERMOSTAT HOUSG GSK (10980457) – $6.49
- Engine Coolant Thermostat Housing Gasket (11138822) – $6.79
- Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
What are the top-rated Cooling and Climate Controls that fit the 2011 Lexus CT200h?
Out of 432 reviews by customers, our 2011 Lexus CT200h Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2011 Lexus CT200h and their top-rated products:
- Engine Cooling Parts
- Integrated Thermostat Housing: With Seal, 180 Degrees (11610743) – $42.99
- High-Performance Electric Water Pump for Optimal Engine Cooling (10741963) – $391.60
- Engine Coolant Thermostat Seal (5181607) – $5.49
What types of Cooling and Climate Controls do you sell for my 2011 Lexus CT200h?
As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2011 Lexus CT200h:
Can I get help with 2011 Lexus CT200h Cooling and Climate Control orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lexus Cooling and Climate Controls and more.
What is your return policy for Lexus CT200h Cooling and Climate Controls?
Advance Auto Parts keeps returns simple. For new Lexus CT200h Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
