2011 Jeep Liberty Differentials

Essential 2011 Jeep Liberty Differentials

Yukon Gear – Master Overhaul Kit For Chrysler ’05 & Up 8.25" Differential (Part No.14204)

Master Overhaul Kit For Chrysler '05 & Up 8.25" Differential

from

$315.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits 2005 and up Chrysler 8.25″
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1112)

Differential Pinion Shim Kit

from

$16.99


Product Features:
  • PINION SHIM-DANA 30,35.50
See More

Dorman – Rear Axle Shaft, Left or Right (Part No.630-319)

Rear Axle Shaft, Left or Right

from

$245.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

Tapered Roller Bearing

from

$6.79
Product Features:
  • Brand may vary by location
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55047)

DIFFERENTIAL GASKET

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

USA Standard Gear – Spartan Locker For Chrysler 8.25" With 29 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17038)

Spartan Locker For Chrysler 8.25" With 29 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$799.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits Chrysler 8.25″ with 29 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – Ppinion Nut 7/8-20 Thread, 1 1/8 Socket (Part No.33146)

Ppinion Nut 7/8-20 Thread, 1 1/8 Socket

from

$10.99
Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.

Product Features:
  • Pinion nut for Jeep JK front, Jeep Liberty front, Ford 9.75″, 10.25″, 10.5″ and AMC Model 20 and Model 35
  • 7/8″ x 20 thread
  • 1 1/8″ socket
See More

Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)

Replacement Cover Gasket For Dana 30

from

$12.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 30
See More

Yukon Gear – Carrier Installation Kit For Dana 30 Differential (Part No.57002)

Carrier Installation Kit For Dana 30 Differential

from

$99.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 30 differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Dana Spicer 30
  • Includes carrier bearings and races and carrier shim kit
See More

Yukon Gear – Replacement Chrome Cover For Dana 30 Standard Rotation (Part No.32003)

Replacement Chrome Cover For Dana 30 Standard Rotation

from

$52.99
Product Features:
  • Fits standard rotation Dana Spicer 30
  • Chrome
See More

Yukon Gear – Grizzly Locker For Model 35 With 27 Spline Axles, 3.54 Up (Part No.28016)

Grizzly Locker For Model 35 With 27 Spline Axles, 3.54 Up

from

$1042.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:
  • Fits AMC Model 35 with 27 spline axles
  • 3.56 and up ratio only
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Dorman – Help – Differential Plug, Rubber (Part No.65293)

Differential Plug, Rubber

from

$5.99
This differential cover plug is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – 0.260" Diameter Cross Pin Roll Pin For 8.75" Chrysler, 8", 9" Ford, And Model 20 And 35 (Part No.33334)

0.260" Diameter Cross Pin Roll Pin For 8.75" Chrysler, 8", 9" Ford, And Model 20 And 35

from

$5.99
0.260″ diameter cross pin roll pin for 8.75″ Chrysler, 8″, 9″ Ford, and Model 20 and 35.

Product Features:
  • Roll pin for Chrysler 8.75″, Ford 8″ and 9″, AMC Model 20 and Model 35
  • 0.260″ diameter
See More

Yukon Gear – 8.25" Chrysler Pinion Gear Thrust Washer (Part No.33273)

8.25" Chrysler Pinion Gear Thrust Washer

from

$26.99
8.25″ Chrysler pinion gear thrust washer.

Product Features:
  • Pinion gear thrust washer
  • Fits Chrysler 8.25″
See More

Yukon Gear – Zip Locker For Dana 30 With 27 Spline Axles, 3.73 & Up (Part No.34016)

Zip Locker For Dana 30 With 27 Spline Axles, 3.73 & Up

from

$1303.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

Product Features:
  • Fits Dana Spicer 30 with 27 spline axles
  • 3.73 and up ratio only
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

Yukon Gear – Model 35 (Standard Open & Tracloc) 8.25" Chrysler Tracloc Cross Pin Bolt (Part No.33230)

Model 35 (Standard Open & Tracloc) 8.25" Chrysler Tracloc Cross Pin Bolt

from

$13.99
Model 35 (standard Open & TracLoc) 8.25″ Chrysler TracLoc cross pin bolt.

Product Features:
  • Cross pin bolt for AMC Model 35 with c-clip axles
See More

Yukon Gear – Yoke For Chrysler 7.25" And 8.25" With A 7290 U/Joint Size (Part No.41005)

Yoke For Chrysler 7.25" And 8.25" With A 7290 U/Joint Size

from

$359.99
Yukon yoke for Chrysler 7.25″ and 8.25″ with a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler 7.25″ and 8.25″
  • 27 spline
  • 7290 u-joint size
  • Inside snap ring design
  • 2.625″ snap ring span
  • 1.125″ cap diameter
  • Strap style
See More

Yukon Gear – Pinion Seal For Jeep Liberty Front (Part No.30235)

Pinion Seal For Jeep Liberty Front

from

$61.99
Pinion seal for Jeep Liberty front.

Product Features:
  • Pinion seal
  • Fits Jeep Liberty front
See More

Motive Gear – Differential Ring and Pinion (Part No.D35-411)

Differential Ring and Pinion

from

$196.99


Product Features:
  • DANA-35 R/P 4.11 STD
See More

Needa Parts – Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack (Part No.090-030)

Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack

from

$6.79
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug & help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – Positraction Internals For Model 35 With 27 Spline Axles (Part No.16130)

Positraction Internals For Model 35 With 27 Spline Axles

from

$462.99
Yukon positraction internals for Model 35 with 27 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits AMC Model 35 Trac Loc positraction
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt, clutches, and spider gear thrust washers.
See More

Crown Auto Jeep Replacmnt – Model 30 Front Axle/ Model 44 Front Axle/ Model 35 Rear Axle/ Amc 20 Rear Axle (Part No.J3182601)

Model 30 Front Axle/ Model 44 Front Axle/ Model 35 Rear Axle/ Amc 20 Rear Axle

from

$5.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

USA Standard Gear – Open Spider Gear Set For Chrysler 8.25", 29 Spline (Part No.39003)

Open Spider Gear Set For Chrysler 8.25", 29 Spline

from

$209.99
Product Features:
  • Spider gear kit
  • Fits Chrysler 8.25″ 29 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Ring Gear Bolt For C200F Front And ’05 7 Up Chrysler 8.25" Rear (Part No.33032)

Ring Gear Bolt For C200F Front And '05 7 Up Chrysler 8.25" Rear

from

$8.99
Ring gear bolt for C200F front and ’05 7 up Chrysler 8.25″ rear.

Product Features:
  • Ring gear bolt for 2005 and up Chrysler 8.25″
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25"

from

$15.99
Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:
  • Side adjuster lock bolt
  • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
See More

2011 Jeep Liberty Differentials

Maybe you’re in the middle of a full rebuild of that 2011 Jeep Liberty. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 120 different Differentials in our inventory ranging from $2.49 to $2,069.99. That means you can find the exact parts or products you need to keep that 2011 Jeep Liberty running smoothly.

Differentials are only as good as their brand. We stock 17 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Jeep Liberty. Valvoline, Driveworks, and Royal Purple are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2011 Jeep Liberty, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,235 reviews in this category, some of the top rated parts include Differential Plug, Rubber with 4.8 stars and Differential Shaft Lock Bolt with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 2011 Jeep Liberty rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2011 Jeep Liberty Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Jeep Liberty demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Liberty the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 2011 Jeep Liberty Differentials

What are the most purchased Differentials for the 2011 Jeep Liberty?

Out of 120 Differentials for the 2011 Jeep Liberty, the most popular in our inventory are:
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
from $19.99
This product is not rated
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
Differential Oil
Taper Bearing Set
from $10.79
(33)
Taper Bearing Set
Differential Bearings
DIFFERENTIAL GASKET
from $6.79
(21)
DIFFERENTIAL GASKET
Rear Housing Cover Gaskets

What are the top-rated 2011 Jeep Liberty Differentials?

Top-rated Differentials for your 2011 Jeep Liberty based on customer reviews/ratings are:
Differential Plug, Rubber
from $5.99
(11)
Differential Plug, Rubber
“I used this Rubber plug to fill a pre-drilled hole in a air intake tube that I customized for a particular application in my car, and it works beautif”
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
“great”
Bearings
from $23.99
(7)
Bearings
“Good price”