2011 Jeep Grand Cherokee Performance and Racing Products
Find Your Specific 2011 Jeep Grand Cherokee Performance and Racing Products
Below you will find various in-demand Jeep Performance and Racing Products, components and accessories for your 2011 Grand Cherokee. Advance Auto Parts has popular Grand Cherokee parts like Performance Exhaust Products, Programmers, Performance Air Intake Kits and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Grand Cherokee model years including
2013,
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021 and more. Select a category of 2011 Jeep Grand Cherokee Performance and Racing Products below and start saving instantly.
Popular 2011 Jeep Grand Cherokee Performance and Racing Products Categories
Essential Performance and Racing Products for 2011 Jeep Grand Cherokees
Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)
from
$469.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.
Product Features:
See More
Product Features:
- HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
- MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
- CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
- Reads and Erases Diagnostic Trouble Codes
- Display Over 15 Vehicle Parameters
- Installation Is Easy-10-20 Minutes
- Free Internet Updates And Upgrades
- 30 Day Money Back Guarantee
Diablosport – inTune i3 Platinum (Part No.8445-1)
from
$475.99
If you are a horsepower junky and you need a fix, look no further. Whether you have a Chrysler, Ford, or GM vehicle in your driveway, Diablo Sport’s inTune i3 Performance Programmer delivers proven performance without even popping the hood. You get a performance tuning upgrade that makes your throttle more responsive, optimizes drivability, improves fuel economy potential, and increases horsepower & torque. The inTune i3 programmer is pre-loaded with dyno-tested performance programs designed specifically for your ride. Platinum i3The Platinum i3 is designed for those who want the best of both worlds, pre-loaded, high-performance tunes in addition to custom tuning capability. The i3 Platinum is already equipped with some of the best tuning right out of the box but we know our customers like to bolt-on upgrades and extract every bit of horsepower out of their vehicles. That is where CMR custom tuning comes in. Our nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the i3. Now you can have great tunes for now, and custom tunes for when you take your ride to the next level with the Platinum i3.Multiple Vehicle Licenses The inTune i3 can tune your whole driveway. With the i3’s additional vehicle license options, you can tune multiple vehicles with one device. If your i3 is currently married to your Wrangler, but you also want to tune your Grand Cherokee, upgrade your i3 with an additional license through our Ignition Update Software and you can be tuning both vehicles in no time. The additional i3 licenses can program any make or model that the i3 supports.
Product Features:
See More
Product Features:
- Add 15-20 rewhip on Wrangler
- Add 20-30 rewhip on V8 Grand Cherokee applications
- Disable MDS
- Adjust throttle response
- Disable speed limiter
- Calibrate for taller tires to correct speedometer
- Supports custom tuning for future modifications
- New “Easy Tune” Mode for Simple Installation
- Dyno Tested Performance Programs
- Adjust options like timing, fueling, idle, speed limiters, rev limiters, tire size, gear ratios and more.
- Blazing Fast Vehicle Read/Write Times
- Windows, Mac OSX Updates
- OBD-II Data Logging
- Read and Clear DTC
Diablosport – inTune i3 Platinum (Part No.8400)
Hypertech – Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (Part No.3300)
from
$239.99
If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).
Product Features:
See More
Product Features:
- Speedometer correction for multiple tire sizes
- Return back to factory settings
- Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
- Internet updateable
- Product might not be available in all states due to local laws.
Dynomax – Super Turbo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID (Part No.17748)
from
$82.99
DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Super Turbo mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.
Product Features:
See More
Product Features:
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
- Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
- Dyno proven to flow up to 700 SCFM
Flowmaster Inc. – 50 Series Muffler, 2.5in Center Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound (Part No.52557)
from
$204.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Dynomax – Ultra Flo Exhaust Muffler 2.25 Inch Inlet ID 2.25 Inch Outlet ID (Part No.17512)
from
$211.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Dynomax – Ultra Flo Exhaust Muffler Assembly 2.5 Inch Inlet ID 3 Inch Outlet ID (Part No.54778)
from
$303.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Dynomax – Exhaust Resonator and Pipe Assembly 2 Bolt Loose Flange Inlet 2.5 Inch Outlet OD (Part No.52498)
from
$119.99
Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax products ┬┐ engineered for ┬┐Pure Unadulterated Power┬┐ ┬┐┬┐ include complete cat-back and axle-back performance exhaust system s; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax product features the benefits of worldwide global engineering resources. The DynoMax brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.
Product Features:
See More
Product Features:
- Dynomax Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax product is backed by engineers who know what you want and expect out of a performance exhaust product.
- Mandrel bends improve flow capacity over traditional bends
- Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
- Pipe diameters are increased from OEM sizes to improve flow and increase power
- Dynomax Exhaust Systems are manufactured with precision benders, & then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
Dynomax – Exhaust Resonator and Pipe Assembly 2 Bolt Loose Flange Inlet 2.5 Inch Outlet OD (Part No.52499)
from
$125.99
Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax products – engineered for “Pure Unadulterated Power” – include complete cat-back and axle-back performance exhaust system s; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax product features the benefits of worldwide global engineering resources. The DynoMax brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.
Product Features:
See More
Product Features:
- Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.
- Mandrel bends improve flow capacity over traditional bends
- Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
- Pipe diameters are increased from OEM sizes to improve flow and increase power
- Dynomax® Exhaust Systems are manufactured with precision benders, & then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
MSD Ignition – Ignition Coil, 5.7L / 6.1L Hemi, 2005-2014, Single (Part No.8255)
from
$114.99
Bring the fire-power to your HEMI. The MSD Blaster gen III HEMI coil is a direct bolt-in and spec’d with superior materials and winding ratios to improve the output of the coil while retaining factory fitment. For over 50 years, MSD has unapologetically delivered industry leading ignition performance. Upgrade your HEMI ignition coils with the same MSD name the pros use and rely on in the most extreme motorsport environments. This MSD Blaster HEMI Coil fits 5.7L, 6.1L, 6.2L and 6.4L HEMI engines, and is available in red or black.
Product Features:
See More
Product Features:
- Improved high rpm operation
- Patented winding design and materials
- Direct bolt-in to factory connectors
- Secondary Current (mA): 56 mA
MSD Ignition – Ignition Coil, Chrysler Late-Model, 1990-1996 (Part No.8228)
from
$80.99
The MSD Blaster Dodge Coil is designed as a replacement coil and produces a high voltage spark. To get even more ignition performance, install an MSD Ignition Control. To ease the wiring with an MSD Ignition, use the Universal Harness, PN 8873.
Product Features:
See More
Product Features:
- Direct performance replacement for late model Dodge vehicles
- Works with stock ignition as well as MSD Ignitions
- CARB E.O. Approved
- Improved mid range RPM power
- Connect to factory wiring
- Use PN 8877 harness for direct plug in install
K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (Part No.77-1526KP)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (Part No.57-1545)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter (Part No.77-1560KTK)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 15 Horsepower, With Washable Air Filter (Part No.57-1549)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 17 Horsepower, With Washable Air Filter (Part No.63-1563)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
aFe POWER – Power Module (Part No.77-46205)
from
$387.99
Power Module
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 7 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12562)
from
$354.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- 3 in. Dia. Mandrel Bent
- Hassle-Free Installation
- 1-Piece Heat Shield
K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter (Part No.77-1572KS)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine.
- DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are included with each intake system.
- IMPROVED ENGINE SOUND – HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
- BETTER TOWING: K&N Air intake kit improves acceleration and uphill performance when towing by improving throttle response, overall horsepower and torque. Excellent for daily and highway driving.
- PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle.
- HIGH-FLOW REUSABLE AIR FILTER: 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt & dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100k miles under normal highway conditions.
- EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools.
- MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.
aFe POWER – Track Series Stage-2 Carbon Fiber Intake System with Pro 5R Media (Part No.57-10014R)
from
$773.99
Track Series Stage-2 Carbon Fiber Intake System with Pro 5R Media
aFe POWER – Momentum GT Cold Air Intake: Gain up to 35 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-76206-1)
from
$462.99
Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. High Quality Tube: This system uses a high quality plastic, CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum air temp sensor fitting provided for easy installation. Large 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4″ x 4-3/4″) oval flange and is 9″ tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Product Features:
See More
Product Features:
- +35 HP / + 31 ft./lbs. Torque Max Gains
- Outflows Factory Intake By 31%
- High Quality 1-Piece Roto-Molded Sealed Housing
- CAD Designed Roto-Molded Intake Tube
K&N – NextGen Cold Air Intake: Adds Up To 12.4 Horsepower, With Washable Air Filter (Part No.50-1572)
from
$449.99
This K&N NextGen cold air intake system is engineered for Jeep Grand Cherokee L V6 3.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 48.5% to your engine and provides an increase of 12.44 horsepower and 9.43 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Dyno-Proven Performance: Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine’s stock tune. Experience the exciting roar of your engine during acceleration, without any drone at cruising speeds.
- NextGen Airbox: The hybrid airbox features a semi-enclosed airbox that helps lower air temperatures, an enlarged fresh air inlet for improved airflow, and better protection against contaminants.
- Oversized Air Filter: An oversized air filter features an increased surface area and a radius-entry design, both engineered to increase airflow and enhance performance.
- Large-Diameter Tube: The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting airspeed and delivering more air to your engine for added performance.
- Precision Engineering: Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.
- Simplified Installation: The simplified design reduces mounting hardware, while Quick-Lock technology allows the filter to snap into place. A sealing bead secures the system with just one hose clamp.
- 50+ Years of Trusted Protection: Since 1969, K&N filters have delivered superior filtration, extended cleaning intervals, and proven performance, trusted by racers and enthusiasts alike.
- Warranty: K&N NextGen intakes come with a No-Hassle Limited Warranty, preserving your factory warranty. Designed and engineered in the USA since 1969, K&N provides dedicated, USA-based customer service.
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 17 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12602)
from
$399.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses Pro 5R Filter For Maximum Air Flow
- Rotomolded Plastic Tube For Maximum Air Flow
- 32% cfm Flow Gain
- Improved Throttle Response
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Washable Air Filter (Part No.57-1570)
from
$419.99
The K&N 57-1570 FIPK air intake system replaces the restrictive factory air filter, air intake housing and intercooler pipe on specific Jeep Grand Cherokee Turbo Diesel models. K&N air intake systems are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly and turbo intercooler pipe. More air means more usable power and acceleration throughout the engine’s RPM range. Air is directed through an aerodynamically engineered intake tube into the engine’s turbo inlet for a guaranteed power gain. The 57-1570 air intake system comes with a K&N high-flow air filter and a heat shield that installs into the original air box space. The intake tube accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle’s existing factory mounting points. The tools needed are a flat blade screwdriver, a ratchet set, a 4mm allen, and several wrenches.
Product Features:
See More
Product Features:
- Guaranteed to Increase Horsepower
- Designed to improve throttle response and engine sound
- Lasts up to 100,000 miles before service is required (depending on driving conditions)
- Replaces entire factory air intake system
- Free-flowing high density polyethylene tube
- Easy to install, usually in 90 minutes or less
- Washable and reusable lifetime air filter
- K&N Million Mile Limited Warranty
aFe POWER – Momentum GT Cold Air Intake: Gain up to 35 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-76206-1)
from
$451.99
Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. High Quality Tube: This system uses a high quality plastic, CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum air temp sensor fitting provided for easy installation. Large 5-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4″ x 4-3/4″) oval flange and is 9″ tall with an inverted top. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Product Features:
See More
Product Features:
- + 35 HP / + 31 Lbs. x Ft. Torque Max Gains
- Outflows Factory Intake By 31%
- High Quality 1-Piece Roto-Molded Sealed Housing
- CAD Designed Roto-Molded Intake Tube
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9021)
from
$213.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 27 Horsepower, With Washable Air Filter (Part No.77-1567KS)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
Upgrade your 2011 Jeep Grand Cherokee with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2011 Jeep Grand Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Grand Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 19 Performance and Racing Products for the 2011 Jeep Grand Cherokee, designed to meet your needs without breaking the bank.
From
Performance Exhaust Product
replacements to
Programmers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2011 Jeep Grand Cherokee at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $42.49 to $536.99, with
an average price of $314.07.
Our 19 Performance and Racing Products in stock come from 9 trusted brands, so you’re sure to find the right part for your 2011 Jeep Grand Cherokee without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Jeep Grand Cherokee, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N Spectre, and more.
K&N Performance and Racing Products
start at just $367.99 and boast an impressive 4.8 stars average rating from customers.
With 225 customer reviews and counting, our 2011 Jeep Grand Cherokee Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2011 Jeep Grand Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Cherokee in top shape, all in one place.
Start shopping confidently below for your 2011 Jeep Grand Cherokee!
Best-Selling Performance Exhaust Products for 2011 Jeep Grand Cherokees
Enhance the driving experience in your Jeep with 3 quality Performance Exhaust Product components, starting at $119.99.
Dynomax – Exhaust Resonator and Pipe Assembly 2 Bolt Loose Flange Inlet 2.5 Inch Outlet OD (Part No.52499)
from
$125.99
Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax products – engineered for “Pure Unadulterated Power” – include complete cat-back and axle-back performance exhaust system s; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax product features the benefits of worldwide global engineering resources. The DynoMax brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.
Product Features:
See More
Product Features:
- Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.
- Mandrel bends improve flow capacity over traditional bends
- Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
- Pipe diameters are increased from OEM sizes to improve flow and increase power
- Dynomax® Exhaust Systems are manufactured with precision benders, & then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
Dynomax – Exhaust Resonator and Pipe Assembly 2 Bolt Loose Flange Inlet 2.5 Inch Outlet OD (Part No.52498)
from
$119.99
Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax products ┬┐ engineered for ┬┐Pure Unadulterated Power┬┐ ┬┐┬┐ include complete cat-back and axle-back performance exhaust system s; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax product features the benefits of worldwide global engineering resources. The DynoMax brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.
Product Features:
See More
Product Features:
- Dynomax Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax product is backed by engineers who know what you want and expect out of a performance exhaust product.
- Mandrel bends improve flow capacity over traditional bends
- Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
- Pipe diameters are increased from OEM sizes to improve flow and increase power
- Dynomax Exhaust Systems are manufactured with precision benders, & then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
Dynomax – Ultra Flo Exhaust Muffler Assembly 2.5 Inch Inlet ID 3 Inch Outlet ID (Part No.54778)
from
$303.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Most Popular 2011 Jeep Grand Cherokee Programmers
Customize your Jeep with 4 Programmers products
like Computer Chip Programmers, all
priced under $475.99.
Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)
from
$469.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.
Product Features:
See More
Product Features:
- HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
- MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
- CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
- Reads and Erases Diagnostic Trouble Codes
- Display Over 15 Vehicle Parameters
- Installation Is Easy-10-20 Minutes
- Free Internet Updates And Upgrades
- 30 Day Money Back Guarantee
SCT Performance – X4 Performance Programmer (Part No.7215)
from
$399.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.
Product Features:
See More
Product Features:
- Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Full color LCD display
- High-speed data logging/monitoring
- Dual analog inputs
- Most popular vehicles supported
- Installs quickly and easily
- Easy restoration back to stock
- User adjustable vehicle parameters
- USB Interface cable included
- Product might not be available in all states due to local laws.
Diablosport – inTune i3 Platinum (Part No.8445-1)
from
$475.99
If you are a horsepower junky and you need a fix, look no further. Whether you have a Chrysler, Ford, or GM vehicle in your driveway, Diablo Sport’s inTune i3 Performance Programmer delivers proven performance without even popping the hood. You get a performance tuning upgrade that makes your throttle more responsive, optimizes drivability, improves fuel economy potential, and increases horsepower & torque. The inTune i3 programmer is pre-loaded with dyno-tested performance programs designed specifically for your ride. Platinum i3The Platinum i3 is designed for those who want the best of both worlds, pre-loaded, high-performance tunes in addition to custom tuning capability. The i3 Platinum is already equipped with some of the best tuning right out of the box but we know our customers like to bolt-on upgrades and extract every bit of horsepower out of their vehicles. That is where CMR custom tuning comes in. Our nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the i3. Now you can have great tunes for now, and custom tunes for when you take your ride to the next level with the Platinum i3.Multiple Vehicle Licenses The inTune i3 can tune your whole driveway. With the i3’s additional vehicle license options, you can tune multiple vehicles with one device. If your i3 is currently married to your Wrangler, but you also want to tune your Grand Cherokee, upgrade your i3 with an additional license through our Ignition Update Software and you can be tuning both vehicles in no time. The additional i3 licenses can program any make or model that the i3 supports.
Product Features:
See More
Product Features:
- Add 15-20 rewhip on Wrangler
- Add 20-30 rewhip on V8 Grand Cherokee applications
- Disable MDS
- Adjust throttle response
- Disable speed limiter
- Calibrate for taller tires to correct speedometer
- Supports custom tuning for future modifications
- New “Easy Tune” Mode for Simple Installation
- Dyno Tested Performance Programs
- Adjust options like timing, fueling, idle, speed limiters, rev limiters, tire size, gear ratios and more.
- Blazing Fast Vehicle Read/Write Times
- Windows, Mac OSX Updates
- OBD-II Data Logging
- Read and Clear DTC
Diablosport – inTune i3 Platinum (Part No.8400)
Top Picks for 2011 Jeep Grand Cherokee Performance Air Intake Kits
Upgrade Jeep Grand Cherokees with top-quality Performance Air Intake Kits parts, including 10 OEM and aftermarket selections for your 2011 model.
K&N – Cold Air Intake: Adds Up To 17 Horsepower, With Washable Air Filter (Part No.63-1563)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9021)
from
$213.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 15 Horsepower, With Washable Air Filter (Part No.77-1563KP)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 17 Horsepower, With Washable Air Filter (Part No.57-1563)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter (Part No.77-1560KTK)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9020)
from
$219.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 17 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-13023D)
from
$399.99
Large Three Layer Performance Air Filter:This 7″ tall 360-degree radial flow air filter features a large 5″ flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals.One-Piece Housing:The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle’s hood is closed. It utilizes the vehicle’s OE air inlet with no additional hardware. An additional auxiliary air inlet is available for use to bring in air when under power, or can be closed with an included plug if desired.Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation:The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.Fitment Note:This item will NOT fit models equipped with the SRT hood.
Product Features:
See More
Product Features:
- Dyno-Proven Gains up to +17 HP and +18 Lbs. x Ft. TQ
- Outflows Factory Intake by 44%
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
Flowmaster Inc. – Air Intake (Part No.615182)
from
$536.99
Air Intake
aFe POWER – Momentum GT Cold Air Intake: Gain up to 16 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-76205-1)
from
$462.99
Unique One-Piece Housing w/ Sight Window: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (Housing-to-Filter Interface US PAT 9440175) Huge 3-Layer Performance Air Filter: The Momentum GT is designed around an oil-free, large 8″ tall 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
Product Features:
See More
Product Features:
- Outflows Factory Intake By Up To 34%
- CAD-Designed Roto-Molded Intake Tube
- High Quality 1-Piece Sealed Housing w/Aux. Air Scoop
- Pro DRY S Oil-Free 3 Layer Synthetic Media
K&N – NextGen Cold Air Intake: Adds Up To 34 Horsepower, With Washable Air Filter (Part No.50-1563)
from
$425.99
This K&N NextGen cold air intake system is engineered for Jeep Grand Cherokee V8 5.7L. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 45.3% to your engine and provides an increase of 34.03 horsepower and 23.83 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Dyno-Proven Performance: Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine’s stock tune. Experience the exciting roar of your engine during acceleration, without any drone at cruising speeds.
- NextGen Airbox: The hybrid airbox features a semi-enclosed airbox that helps lower air temperatures, an enlarged fresh air inlet for improved airflow, and better protection against contaminants.
- Oversized Air Filter: An oversized air filter features an increased surface area and a radius-entry design, both engineered to increase airflow and enhance performance.
- Large-Diameter Tube: The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting airspeed and delivering more air to your engine for added performance.
- Precision Engineering: Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.
- Simplified Installation: The simplified design reduces mounting hardware, while Quick-Lock technology allows the filter to snap into place. A sealing bead secures the system with just one hose clamp.
- 50+ Years of Trusted Protection: Since 1969, K&N filters have delivered superior filtration, extended cleaning intervals, and proven performance, trusted by racers and enthusiasts alike.
- Warranty: K&N NextGen intakes come with a No-Hassle Limited Warranty, preserving your factory warranty. Designed and engineered in the USA since 1969, K&N provides dedicated, USA-based customer service.
In-Demand Performance Ignition Products for 2011 Jeep Grand Cherokees
Select from 2 premium Performance Ignition Products parts for your 2011 Jeep Grand Cherokee, with prices ranging from $114.99 to $387.99.
aFe POWER – Power Module (Part No.77-46205)
from
$387.99
Power Module
MSD Ignition – Ignition Coil, 5.7L / 6.1L Hemi, 2005-2014, Single (Part No.8255)
from
$114.99
Bring the fire-power to your HEMI. The MSD Blaster gen III HEMI coil is a direct bolt-in and spec’d with superior materials and winding ratios to improve the output of the coil while retaining factory fitment. For over 50 years, MSD has unapologetically delivered industry leading ignition performance. Upgrade your HEMI ignition coils with the same MSD name the pros use and rely on in the most extreme motorsport environments. This MSD Blaster HEMI Coil fits 5.7L, 6.1L, 6.2L and 6.4L HEMI engines, and is available in red or black.
Product Features:
See More
Product Features:
- Improved high rpm operation
- Patented winding design and materials
- Direct bolt-in to factory connectors
- Secondary Current (mA): 56 mA
Top-Rated Performance and Racing Products Brands For Your 2011 Jeep Grand Cherokee
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2011 Jeep Grand Cherokees. Below you’ll find some of our best rated Performance and Racing Products from K&N and Spectre, and more. Performance and Racing Products from these brands that fit a 2011 Grand Cherokee start at just $213.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2011 Jeep Grand Cherokee Performance and Racing Products
When it comes to maintaining or upgrading your 2011 Jeep Grand Cherokee, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2011 Jeep Grand Cherokee. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $367.99, with an average price of just $402.99. Plus, with over 42 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$367.99
(1)
Cold Air Intake: Adds Up To 17 Horsepower, With Washable Air Filter
“Direct easy fitment. Took 20 minutes”
from
$472.99
(6)
Cold Air Intake: Adds Up To 15 Horsepower, With Washable Air Filter
“Installed a 77-1563KP on my 2011 Dodge Durango Citadel with Hemi. Has noticeable power increase and fuel mileage increase. Also the additional sound i”
from
$367.99
(35)
Cold Air Intake: Adds Up To 17 Horsepower, With Washable Air Filter
“5 Star Review”
Popular Spectre 2011 Jeep Grand Cherokee Performance and Racing Products
Spectre auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2011 Jeep Grand Cherokee owner should feel confident when installing genuine Spectre parts in their vehicle. To ensure the best fit and performance for your 2011 Grand Cherokee, Advance Auto Parts carries a full inventory of 1 Spectre Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Spectre Performance and Racing Products range up to $213.99, plus, with more than 1 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$213.99
(1)
Cold Air Intake Kit Engineered to Add Horsepower & Torque
“Not installed yet but have ordered others”
FAQs for 2011 Jeep Grand Cherokee Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2011 Jeep Grand Cherokees?
Out of 19 Performance and Racing Products that fit 2011 Jeep Grand Cherokees, the following parts are the top sellers:
- 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (99991313) – $469.99
- Cold Air Intake Kit Engineered to Add Horsepower & Torque (11413085) – $219.99
- Exhaust Resonator and Pipe Assembly 2 Bolt Loose Flange Inlet 2.5 Inch Outlet OD (11693838) – $125.99
What’s the price range for 2011 Jeep Grand Cherokee Performance and Racing Products?
Performance and Racing Product prices for the 2011 Jeep Grand Cherokee start at $42.49 and go up to $536.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2011 Jeep Grand Cherokee?
The average price for Performance and Racing Products for the 2011 Jeep Grand Cherokee is $314.07. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jeep Grand Cherokee model years?
What are the cheapest Performance and Racing Products for my 2011 Jeep Grand Cherokee?
The cheapest 2011 Jeep Grand Cherokee Performance and Racing Products we carry in stock are:
- inTune i3 Platinum (50008722) – $42.49
- Ignition Coil, 5.7L / 6.1L Hemi, 2005-2014, Single (10211638) – $114.99
- Exhaust Resonator and Pipe Assembly 2 Bolt Loose Flange Inlet 2.5 Inch Outlet OD (11693786) – $119.99
- Exhaust Resonator and Pipe Assembly 2 Bolt Loose Flange Inlet 2.5 Inch Outlet OD (11693838) – $125.99
- Cold Air Intake Kit Engineered to Add Horsepower & Torque (11413002) – $213.99
What are the top-rated Performance and Racing Products that fit the 2011 Jeep Grand Cherokee?
Out of 225 reviews by customers, our 2011 Jeep Grand Cherokee Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2011 Jeep Grand Cherokee and their top-rated products:
- Performance Air Intake Kits
- Cold Air Intake: Adds Up To 15 Horsepower, With Washable Air Filter (10202776) – $472.99
- Cold Air Intake: Adds Up To 17 Horsepower, With Washable Air Filter (11972052) – $367.99
- Cold Air Intake: Adds Up To 17 Horsepower, With Washable Air Filter (10202774) – $367.99
What types of Performance and Racing Products do you sell for my 2011 Jeep Grand Cherokee?
As of 6/2/26, these are some of the most in-demand types of Performance and Racing Products for a 2011 Jeep Grand Cherokee:
Can I get help with 2011 Jeep Grand Cherokee Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.
What is your return policy for Jeep Grand Cherokee Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jeep Grand Cherokee Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
