2011 Jeep Compass Drivetrains
Find Your Specific 2011 Jeep Compass Drivetrains
Below you will find various in-demand Jeep Drivetrains, components and accessories for your 2011 Compass. Advance Auto Parts has popular Compass parts like Drive Shafts and Axles, Transfer Cases, Universal Joints and more. You’ll also find aftermarket and OEM Drivetrains for other Compass model years including
2013,
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021 and more. Select a category of 2011 Jeep Compass Drivetrains below and start saving instantly.
Popular 2011 Jeep Compass Drivetrains Categories
Essential Drivetrains for 2011 Jeep Compasses
Yukon Gear – "Yukon Gear Bearing Install Kit for ’75 and Newer Chrysler 8.25"" Differential, 11004" (Part No.11004)
from
$234.99
Yukon Bearing Installation Kits are perfect for shops and builders who have shims on the shelf and are looking to save cost over a Master Overhaul Kit. This kit uses Timken bearings and races along with all high-quality small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to properly install your ring and pinion gear set.
See More
Crown Auto Jeep Replacmnt – Crown Auto Jeep Replacmnt OE Replacement, 68064273AB (Part No.68064273AB)
from
$4.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
See More
Yukon Gear – Yukon Gear 1310 To Mechanics 3R Adapter U/Joint, 42013 (Part No.42013)
Yukon Gear – "Yukon Gear 7290 U/Joint Strap Kit (4 Bolts And 2 Straps) For Chrysler 7.25"", 8.25"", 8.75"", And 9.25"", 41013" (Part No.41013)
from
$52.99
“7290 U/joint strap kit (4 bolts and 2 straps) for Chrysler 7.25″”, 8.25″”, 8.75″”, and 9.25″”.”
See More
Carquest Standard – Carquest Wheel Hub Repair Kit, NT930558K (Part No.NT930558K)
from
$89.99
WJB Automotive wheel hub kits make installing traditional wheel hubs and bearings easy by providing all necessary components in one kit. These kits may include the wheel hub, wheel bearing, axle nut, retaining clips, and oil seals depending on the specific application. All components included in the kit are directly engineered from WJB Automotive and meet the high standards of the company€™s manufacturing process. WJB Automotive ensures all components included in the kit are compatible with each other as well as any applicable vehicle.
See More
Crown Auto Jeep Replacmnt – Crown Auto Jeep Replacmnt OE Replacement, 5105309AB (Part No.5105309AB)
from
$19.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
See More
Dorman – Dorman Drive Shaft, 946-309 (Part No.946-309)
from
$1111.00
Upgrade and simplify your driveshaft replacement with a premium driveshaft that’s delivered fully assembled, dynamically pre-balanced and ready for a fast, hassle-free installation on specified vehicle makes, models and years. Engineered and manufactured in the USA, the driveshaft is manufactured from high-precision, drawn over mandrel (DOM) seamless steel tubing that offers superior concentricity, uniform wall thickness and greater torsional strength and dent resistance than standard welded steel. The assembly includes 100% new-not remanufactured-components, including yokes, CV joints and U-joints. A premium quality driveshaft assembly deserves premium packaging; this product ships in protective foam-in-place packaging to ensure it arrives in the same pristine, install-ready condition in which it left the manufacturing facility.
See More
Motive Gear – Motive Gear Differential Internal Carrier Gear Kit, C8.25BIL (Part No.C8.25BIL)
Yukon Gear – Yukon Gear Pinion Nut, 33142 (Part No.33142)
from
$10.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
See More
Driveworks – Driveworks Oil Seal, S-710396 (Part No.S-710396)
from
$12.29
Driveworks Oil Seal, S-710396. BEARINGS, SEALS, HUB ASSEMBLIES>BEARINGS & SEALS>SEALS>ECONOMY SEALS from Driveworks
See More
Yukon Gear – "Yukon Gear 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25"", 8.25"", 8.75"", 9.25"", 33246" (Part No.33246)
from
$10.99
“7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″”, 8.25″”, 8.75″”, 9.25″”.”
See More
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts, 932-988 (Part No.932-988)
from
$57.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
See More
Yukon Gear – "Yukon Gear Yoke for Chrysler 7.25"" and 8.25"" with A 7260 U/Joint Size, 41003" (Part No.41003)
from
$279.99
Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
See More
Powertrax – Powertrax Grip LS Traction System, LS308229 (Part No.LS308229)
from
$505.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Driveworks – Driveworks Wheel Bearing: Direct Fit, 1 Piece, S-510090 (Part No.S-510090)
from
$49.99
Driveworks wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, Driveworks bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
See More
Yukon Gear – "Yukon Gear 8.25"" Chrysler Pinion Gear Thrust Washer, 33273" (Part No.33273)
from
$26.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
See More
Yukon Gear – "Yukon Gear Yoke for Chrysler 7.25"" and 8.25"" with A 1310 U/Joint Size, 41004" (Part No.41004)
from
$226.99
Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
See More
National – National Shaft Repair Sleeve, 99166 (Part No.99166)
from
$36.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
National – National Bearing Race, JL69310 (Part No.JL69310)
from
$12.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
See More
USA Standard Gear – "USA Standard Gear Ring & Pinion Gear Set For Chrysler 8.25"" In A 4.88 Ratio, 36268" (Part No.36268)
from
$334.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
See More
Anchor – Anchor Differential Mount Right, 3462 (Part No.3462)
from
$65.99
Anchor 3462 Differential Mounts are specifically engineered and manufactured to meet or exceed OE standards to ensure perfect fit and function. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
See More
Schaeffler – Schaeffler Shaft Seal, SS2475 (Part No.SS2475)
from
$8.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
See More
Yukon Gear – Yukon Gear C/Clip, 33083 (Part No.33083)
from
$8.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
See More
Crown Auto Jeep Replacmnt – Crown Auto Jeep Replacmnt OE Replacement, 68088498AD (Part No.68088498AD)
from
$281.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
See More
Motive Gear – Motive Gear Differential Pinion Shim Kit, 1100 (Part No.1100)
Driveworks – Driveworks Tapered Roller Bearing, S-JL-69349 (Part No.S-JL-69349)
Carquest Premium – Carquest CV Axle Assembly, NCV82024 (Part No.NCV82024)
from
$155.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
See More
Yukon Gear – "Yukon Gear Ring Gear Bolt For C200F Front And ’05 7 Up Chrysler 8.25"" Rear, 33032" (Part No.33032)
Upgrade your 2011 Jeep Compass with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 2011 Jeep Compass, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Drivetrains are key to keeping your Compass functioning at its best. At Advance Auto Parts, we offer a wide selection of 93 Drivetrains for the 2011 Jeep Compass, designed to meet your needs without breaking the bank.
From
Drive Shafts and Axle
replacements to
Transfer Cases
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2011 Jeep Compass at great prices.
Our Drivetrains inventory for this model
ranges from just $1.15 to $1,111.00, with
an average price of $175.31.
Our 93 Drivetrains in stock come from 16 trusted brands, so you’re sure to find the right part for your 2011 Jeep Compass without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Jeep Compass, we stock popular OEM and aftermarket Drivetrains from top names
like Carquest Premium, National, Motive Gear, and more.
Carquest Premium Drivetrains
start at just $121.99 and boast an impressive 4.5 stars average rating from customers.
National and Motive Gear also bring quality to the table, with Drivetrains available starting at $2.99, and at an average 4.3 stars rating.
With 547 customer reviews and counting, our 2011 Jeep Compass Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2011 Jeep Compass is always ready to roll. We’re committed to providing you with everything you need to keep your Compass in top shape, all in one place.
Start shopping confidently below for your 2011 Jeep Compass!
Best-Selling Drive Shafts and Axles for 2011 Jeep Compasses
Enhance the driving experience in your Jeep with 14 quality Drive Shafts and Axle components, starting at $8.99.
Carquest Premium – Carquest New CV Axle Shaft Assembly, NCV82017 (Part No.NCV82017)
from
$121.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
See More
Carquest Premium – Carquest New CV Axle Shaft Assembly, NCV82020 (Part No.NCV82020)
from
$129.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
See More
Carquest Premium – Carquest CV Axle Shaft Assembly, NCV82022 (Part No.NCV82022)
from
$146.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
See More
Carquest Premium – Carquest New CV Axle Shaft Assembly, NCV82018 (Part No.NCV82018)
from
$150.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
See More
Yukon Gear – Yukon Gear C/Clip, 33083 (Part No.33083)
from
$8.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
See More
Carquest Premium – Carquest CV Axle Shaft Assembly, NCV729451 (Part No.NCV729451)
from
$94.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
See More
Carquest Premium – Carquest CV Axle Shaft Assembly, NCV729461 (Part No.NCV729461)
from
$89.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
See More
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts, 932-988 (Part No.932-988)
from
$57.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
See More
Yukon Gear – "Yukon Gear Yoke for Chrysler 7.25"" and 8.25"" with A 1310 U/Joint Size, 41004" (Part No.41004)
from
$226.99
Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
See More
Dorman – Dorman Drive Shaft, 946-309 (Part No.946-309)
from
$1111.00
Upgrade and simplify your driveshaft replacement with a premium driveshaft that’s delivered fully assembled, dynamically pre-balanced and ready for a fast, hassle-free installation on specified vehicle makes, models and years. Engineered and manufactured in the USA, the driveshaft is manufactured from high-precision, drawn over mandrel (DOM) seamless steel tubing that offers superior concentricity, uniform wall thickness and greater torsional strength and dent resistance than standard welded steel. The assembly includes 100% new-not remanufactured-components, including yokes, CV joints and U-joints. A premium quality driveshaft assembly deserves premium packaging; this product ships in protective foam-in-place packaging to ensure it arrives in the same pristine, install-ready condition in which it left the manufacturing facility.
See More
Yukon Gear – Yukon Gear Carrier Bearing Puller Set, 56034 (Part No.56034)
from
$689.99
Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.
See More
Carquest Premium – Carquest CV Axle Assembly, NCV12136 (Part No.NCV12136)
from
$151.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
See More
Crown Auto Jeep Replacmnt – Crown Auto Jeep Replacmnt OE Replacement, 5105309AB (Part No.5105309AB)
from
$19.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
See More
Driveworks – Driveworks Oil Seal, S-710396 (Part No.S-710396)
from
$12.29
Driveworks Oil Seal, S-710396. BEARINGS, SEALS, HUB ASSEMBLIES>BEARINGS & SEALS>SEALS>ECONOMY SEALS from Driveworks
See More
Most Popular 2011 Jeep Compass Transfer Cases
Customize your Jeep with 3 Transfer Cases products
like Transfer Case Output Shaft Seals,
Transfer Case Shifter Shaft Washers, and
Transfer Case Differential Bearings, all
priced under $23.29.
Crown Auto Jeep Replacmnt – Crown Auto Jeep Replacmnt OE Replacement, 68064273AB (Part No.68064273AB)
from
$4.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
See More
National – National Transfer Case Extension Housing Seal, 711135 (Part No.711135)
from
$23.29
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
Schaeffler – Schaeffler Cup, JL69310 (Part No.JL69310)
from
$7.99
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
See More
Top Picks for 2011 Jeep Compass Universal Joints
Upgrade Jeep Compasses with top-quality Universal Joints parts, including 9 OEM and aftermarket selections for your 2011 model.
Yukon Gear – Yukon Gear 1310 To 1330 Adapter U/Joint, 42005 (Part No.42005)
from
$59.99
“Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″” span and 1.062″” caps. The 1330 side has a 3.625″” span and 1.062″” caps. Both sides are outside snap ring.”
See More
Yukon Gear – Yukon Gear 1310 To Mechanics 3R Adapter U/Joint, 42013 (Part No.42013)
Yukon Gear – Yukon Gear 1330 Dual-Size Cap U/Joint, 42017 (Part No.42017)
from
$61.99
“Yukon 1330 Dual-size cap U/Joint. 3.625″” snap ring span. One set of caps is 1.125″” in diameter and the other is 1.062″”. Outside snap ring.”
See More
Yukon Gear – "Yukon Gear 7290 U/Joint Strap Kit (4 Bolts And 2 Straps) For Chrysler 7.25"", 8.25"", 8.75"", And 9.25"", 41013" (Part No.41013)
from
$52.99
“7290 U/joint strap kit (4 bolts and 2 straps) for Chrysler 7.25″”, 8.25″”, 8.75″”, and 9.25″”.”
See More
Yukon Gear – Yukon Gear 1310 Lifetime U/Joint, 42003 (Part No.42003)
from
$57.99
“1310 Yukon Lifetime U/joint. 1.718″” snap ring span, 1.062″” cap diameter. Inside snap ring.”
See More
Yukon Gear – Yukon Gear Round Companion Flange, 41120 (Part No.41120)
from
$289.99
“Yukon round companion flange for Jeep Liberty rear, Chrysler 8.25″”. Yukon yokes come with a Limited warranty against manufacturing defects.”
See More
Yukon Gear – "Yukon Gear Yoke for Chrysler 8.25"" with A 1310 U/Joint Size, 41010" (Part No.41010)
from
$289.99
Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
See More
Yukon Gear – Yukon Gear 7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25, 41192 (Part No.41192)
Yukon Gear – "Yukon Gear 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25"", 8.25"", 8.75"", 9.25"", 33246" (Part No.33246)
from
$10.99
“7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″”, 8.25″”, 8.75″”, 9.25″”.”
See More
In-Demand Differentials for 2011 Jeep Compasses
Select from 64 premium Differentials parts for your 2011 Jeep Compass, with prices ranging from $2.99 to $579.99.
Royal Purple – Royal Purple MaxGear SAE 75W90 High Performance Gear Oil w/Friction Modifier Additive, 1 QT, 01300 (Part No.01300)
from
$26.49
Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.
See More
National – National Shaft Repair Sleeve, 99139 (Part No.99139)
from
$41.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
Motive Gear – Motive Gear Differential Pinion Shim Kit, 1100 (Part No.1100)
Motive Gear – Motive Gear Differential Crush Sleeve, 3507575 (Part No.3507575)
National – National Multi-Purpose Bearing, A-18 (Part No.A-18)
from
$18.29
Manufactured with premium-grade steel, National taper bearing sets feature crowned raceways and rollers to ensure even load distribution.
See More
Driveworks – Driveworks Wheel Bearing: Direct Fit, 1 Piece, S-510090 (Part No.S-510090)
from
$49.99
Driveworks wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, Driveworks bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
See More
Motive Gear – Motive Gear Differential Pinion Nut, 1260823 (Part No.1260823)
from
$10.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More
Yukon Gear – Yukon Gear 3 Qt – Penzoil 80W90 Conventional Gear Oil, 15002 (Part No.15002)
from
$44.99
Union 76 gear oil is a conventional non-synthetic 80W90 formulation designed for all types of differentials.
See More
Yukon Gear – Yukon Gear Crush Sleeve, 33093 (Part No.33093)
from
$10.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
See More
Driveworks – Driveworks Tapered Roller Bearing, S-JL-69349 (Part No.S-JL-69349)
Motive Gear – Motive Gear Ring Gear Bolt, 1304 (Part No.1304)
from
$7.99
Motive Gear Ring Gear Bolt, 1304. DRIVELINE – TRANSMISSION PARTS>DIFFERENTIAL PARTS>DIFFERENTIAL PARTS – MISC>DIFFERENTIAL PARTS – MISC from Motive Gear
See More
Yukon Gear – "Yukon Gear Ring Gear Bolt For C200F Front And ’05 7 Up Chrysler 8.25"" Rear, 33032" (Part No.33032)
Yukon Gear – "Yukon Gear Pinion Depth Shims for GM 8.25""IFS, 8.5"", 12 Bolt Car, Ford 8.8"", Chrysler 8.25"", 55009" (Part No.55009)
from
$27.99
Yukon shim kits are precision machined and tailored for each individual application to ensure you have the right shims for every set up.
See More
Yukon Gear – Yukon Gear Pinion Nut, 33142 (Part No.33142)
from
$10.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
See More
National – National Shaft Repair Sleeve, 99166 (Part No.99166)
from
$36.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
Yukon Gear – "Yukon Gear Chrysler Fine Spline Pinion Nut for Chrysler 7.25"", 8"", 8.25"", 8.75"", and 9.25"", 33253" (Part No.33253)
from
$26.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
See More
USA Standard Gear – USA Standard Gear Differential Spider Gear Kits, 39003 (Part No.39003)
from
$209.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard Limited warranty against defects on their ring & pinion sets.
See More
Yukon Gear – "Yukon Gear Bolt/Screw for Adjuster Lock for Chrysler 7.25"", 8.25"", 8.75"", 9.25"", 33233" (Part No.33233)
from
$15.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
See More
Powertrax – Powertrax Grip LS Traction System, LS308229 (Part No.LS308229)
from
$505.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Yukon Gear – "Yukon Gear Carrier Installation Kit for ’76 & Up Chrysler 8.25"" Rear, 57014" (Part No.57014)
from
$78.99
Yukon Carrier Installation Kits are a convenient and low-cost solution for carrier changes in cases where one is upgrading to a positraction limited slip differential, a mechanical locker, or an air operated locker. These kits contain carrier bearings and races and a carrier shim kit.
See More
National – National Shaft Repair Sleeve, 99210 (Part No.99210)
from
$49.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
Motive Gear – Motive Gear Differential Ring and Pinion, C8.25-456 (Part No.C8.25-456)
USA Standard Gear – USA Standard Gear Ring/Pinion Sets, 36350 (Part No.36350)
Motive Gear – Motive Gear Differential Ring and Pinion, C8.25-355 (Part No.C8.25-355)
Most Sold 2011 Jeep Compass Hubs and Hub Assemblies
Explore our best-selling Jeep parts for the 2011 Compass among 3 OEM and aftermarket options starting from $89.99.
Crown Auto Jeep Replacmnt – Crown Auto Jeep Replacmnt OE Replacement, 68088498AD (Part No.68088498AD)
from
$281.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
See More
Crown Auto Jeep Replacmnt – Crown Auto Jeep Replacmnt OE Replacement, 68088499AD (Part No.68088499AD)
from
$274.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
See More
Carquest Standard – Carquest Wheel Hub Repair Kit, NT930558K (Part No.NT930558K)
from
$89.99
WJB Automotive wheel hub kits make installing traditional wheel hubs and bearings easy by providing all necessary components in one kit. These kits may include the wheel hub, wheel bearing, axle nut, retaining clips, and oil seals depending on the specific application. All components included in the kit are directly engineered from WJB Automotive and meet the high standards of the company€™s manufacturing process. WJB Automotive ensures all components included in the kit are compatible with each other as well as any applicable vehicle.
See More
Top-Rated Drivetrains Brands For Your 2011 Jeep Compass
Shop for the best-rated brands offering Drivetrains and other products for your 2011 Jeep Compasses. Below you’ll find some of our best rated Drivetrains from Carquest Premium, National, and Motive Gear, and more. Drivetrains from these brands that fit a 2011 Compass start at just $2.99 and are rated as high as 4.5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest Premium 2011 Jeep Compass Drivetrains
When it comes to maintaining or upgrading your 2011 Jeep Compass, using quality Drivetrains is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Drivetrains, specifically designed for the 2011 Jeep Compass. With over 3 Carquest Premium brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $121.99, with an average price of just $132.99. Plus, with over 16 customer reviews and an average rating of 4.5 stars, you can trust that our Carquest Premium Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$146.99
(5)
Carquest CV Axle Shaft Assembly, NCV82022
“so far so good, fit perfect, service was great”
from
$129.99
(2)
Carquest New CV Axle Shaft Assembly, NCV82020
“Enjoying the fact that my car is running a lot smoother I am thankful that everything is been made easy through your online ordering made my life a lo”
Popular National 2011 Jeep Compass Drivetrains
National auto parts is one of the highest quality Drivetrain brands in the market. Any 2011 Jeep Compass owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2011 Compass, Advance Auto Parts carries a full inventory of 2 National Drivetrains. Plus you will be keeping your Jeep in peak condition while saving money because prices on these National Drivetrains range from $18.29 to $41.49, plus, with more than 37 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
from
$41.49
(1)
National Shaft Repair Sleeve, 99139
“used these speedy sleeves on the front axle of my Kubota with the wheel seals,saved me from spending 15 times more on the axle’s, Thank’s”
FAQs for 2011 Jeep Compass Drivetrains
Which Drivetrains are best-sellers for 2011 Jeep Compasses?
Out of 93 Drivetrains that fit 2011 Jeep Compasses, the following parts are the top sellers:
- National Multi-Purpose Bearing, A-18 (3275787) – $18.29
- Driveworks Wheel Bearing: Direct Fit, 1 Piece, S-510090 (10659698) – $49.99
- Carquest New CV Axle Shaft Assembly, NCV82017 (10612181) – $121.99
What’s the price range for 2011 Jeep Compass Drivetrains?
Drivetrain prices for the 2011 Jeep Compass start at $1.15 and go up to $1,111.00 for the most premium parts.
What’s the average price of a Drivetrain for a 2011 Jeep Compass?
The average price for Drivetrains for the 2011 Jeep Compass is $175.31. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Jeep Compass model years?
What are the cheapest Drivetrains for my 2011 Jeep Compass?
The cheapest 2011 Jeep Compass Drivetrains we carry in stock are:
- Motive Gear Differential Crush Sleeve, 3507575 (20520219) – $2.99
- Crown Auto Jeep Replacmnt OE Replacement, 68064273AB (11900908) – $4.99
- Motive Gear Differential Pinion Shim Kit, 1100 (20520100) – $6.99
- Motive Gear Ring Gear Bolt, 1304 (20520201) – $7.99
- Schaeffler Cup, JL69310 (50205902) – $7.99
What are the top-rated Drivetrains that fit the 2011 Jeep Compass?
Out of 547 reviews by customers, our 2011 Jeep Compass Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2011 Jeep Compass and their top-rated products:
- Differentials
- Motive Gear Differential Crush Sleeve, 3507575 (20520219) – $2.99
- National Shaft Repair Sleeve, 99139 (18445088) – $41.49
- Motive Gear Differential Pinion Shim Kit, 1100 (20520100) – $6.99
What types of Drivetrains do you sell for my 2011 Jeep Compass?
As of 8/2/26, these are some of the most in-demand types of Drivetrains for a 2011 Jeep Compass:
Can I get help with 2011 Jeep Compass Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Drivetrains and more.
What is your return policy for Jeep Compass Drivetrains?
Advance Auto Parts keeps returns simple. For new Jeep Compass Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
