2011 Jeep Compass Drivetrains

Below you will find various in-demand Jeep Drivetrains, components and accessories for your 2011 Compass. Advance Auto Parts has popular Compass parts like Spindles, Drive Shafts and Axles, Transfer Cases and more. You’ll also find aftermarket and OEM Drivetrains for other Compass model years including 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 and more. Select a category of 2011 Jeep Compass Drivetrains below and start saving instantly.

Popular 2011 Jeep Compass Drivetrains Categories

Differential Oil

U-Joints

Drive Shaft and Axles

Rear Differential Cover Gaskets

Transfer Case Shift Lever Bushings

Differential Mounts

Drive and Prop Shaft Assemblies

Differential Bearings

Axle Shaft Dampers

Bearing Pullers

Drive Shaft Slip Yoke Sleeves

Differential Pinion Pilot Bearings

U-Joint Centering Yokes

Transfer Case Output Shaft Seals

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Spindle Lock Nuts

Drive Shaft Repair Kits

Transfer Case Shifter Shaft Washers

Differential Carrier Bearings

Axle Hubs

Transfer Case Output Shaft Bearings

Axle Shaft Seal Retainers

Differential Seals

Differential Drain Plugs

Differential Ring Gear Bolts

Bearing Race Drivers

Input Shaft Seals

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Cross Pins

Differential Pinion Gear Thrust Washers

Universal Joint Strap Bolts

Essential Drivetrains for 2011 Jeep Compasses

from

$10.99

Crush Sleeve for Model 35, Chrysler 7.25″, 8.25″ Ford 8″ & GM 7.75″. Approx 0.495″ long.

Product Features:

Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
0.495″ tall

from

$47.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$359.99

Yukon yoke for Chrysler 7.25″ and 8.25″ with a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 7.25″ and 8.25″
27 spline
7290 u-joint size
Inside snap ring design
2.625″ snap ring span
1.125″ cap diameter
Strap style

from

$22.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; double-lip
Temperature: -20 Deg. F to 300 Deg. F /-29 Deg. C to 49 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$78.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for ’76 & up Chrysler 8.25″ rear.

Product Features:

Fits 1976 and up Chrysler 8.25″
Includes carrier bearings and races

from

$188.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits M86610 race
All steel construction

from

$16.49

These replacement automatic transmission shift lever control rod bushings have been made to match the function and performance of the original bushings on select vehicle years, makes and models.

Product Features:

Direct replacement – these replacement auto trans shift lever control rod bushings match the original equipment design on specified vehicles
Conveniently fix- simple solution to address worn bushings and restore original performance and feel
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$13.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$289.99

Yukon yoke for Chrysler 8.25″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps, with outside snap rings for the Jeep Cherokee. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 8.25″
27 spline
1310 u-joint size
Outside snap ring design
3.219″ snap ring span
1.062″ cap diameter
Strap style

from

$18.99

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

from

$6.29

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$59.99

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$289.99

Yukon round companion flange for Jeep Liberty rear, Chrysler 8.25″. Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 8.25″
27 spline
Round companion flange

from

$8.99

Ring gear bolt for C200F front and ’05 7 up Chrysler 8.25″ rear.

Product Features:

Ring gear bolt for 2005 and up Chrysler 8.25″

from

$315.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits 2005 and up Chrysler 8.25″
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.

from

$505.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

from

$288.99

Product Features:

CHRY 10BLT 8.25+8.36 R&P-3.55 RATIO

from

$65.99

The purpose of the mount is to support the driveline on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Differential Mounts prevents driveline rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to DODGE 07-08; JEEP 07-17;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
For Years: 2007-2017
Weight approx: 2 Lbs

from

$10.99

7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:

U-Joint strap bolt
Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
7290 u-joint size

from

$8.99

C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:

c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
.150″ thick

from

$19.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$171.99

8.25″ Chrysler, Model 35, D36 ICA, & Dana 28 TracLoc clutch set.

Product Features:

Clutch kit
Fits Chrysler 8.25″ Trac Loc positraction

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$37.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits 1976 and up Chrysler 8.25″
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$15.99

Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:

Side adjuster lock bolt
Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″

from

$11.29

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Upgrade your 2011 Jeep Compass with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2011 Jeep Compass, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Drivetrains are key to keeping your Compass functioning at its best. At Advance Auto Parts, we offer a wide selection of 90 Drivetrains for the 2011 Jeep Compass, designed to meet your needs without breaking the bank. From Spindle replacements to Drive Shafts and Axles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2011 Jeep Compass at great prices. Our Drivetrains inventory for this model ranges from just $2.99 to $1,109.99, with an average price of $174.29. Our 90 Drivetrains in stock come from 16 trusted brands, so you’re sure to find the right part for your 2011 Jeep Compass without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Jeep Compass, we stock popular OEM and aftermarket Drivetrains from top names like Castrol, Carquest Premium, Motive Gear, and more. Castrol Drivetrains start at just $14.79 and boast an impressive 4.9 stars average rating from customers. Carquest Premium and Motive Gear also bring quality to the table, with Drivetrains available starting at $2.99, and at an average 4.4 stars rating. With 2,210 customer reviews and counting, our 2011 Jeep Compass Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Jeep Compass is always ready to roll. We’re committed to providing you with everything you need to keep your Compass in top shape, all in one place. Start shopping confidently below for your 2011 Jeep Compass!

Best-Selling Spindles for 2011 Jeep Compasses

Enhance the driving experience in your Jeep with 1 quality Spindle components, starting at $6.29.

show more show less

from

$6.29

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Popular 2011 Jeep Compass Drive Shafts and Axles

Customize your Jeep with 15 Drive Shafts and Axles products like Drive Shaft and Axles, Drive and Prop Shaft Assemblies, and Drive Shaft Slip Yoke Sleeves, all priced under $1,109.99.

show more show less

from

$107.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$118.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$135.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$138.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$8.99

C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:

c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
.150″ thick

from

$84.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$84.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$59.99

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$637.99

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100 percent dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

Built to match O.E. form, fit and function.
100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$1109.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$689.99

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$289.99

Yukon round companion flange for Jeep Liberty rear, Chrysler 8.25″. Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 8.25″
27 spline
Round companion flange

from

$279.99

Yukon yoke for Chrysler 7.25″ and 8.25″ with a 7260 U/joint size. 2.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 7.25″ and 8.25″
27 spline
7260 u-joint size
Inside snap ring design
2.125″ snap ring span
1.078″ cap diameter
Strap style

from

$151.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$19.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

Top Picks for 2011 Jeep Compass Transfer Cases

Upgrade Jeep Compasses with top-quality Transfer Cases parts, including 6 OEM and aftermarket selections for your 2011 model.

show more show less

from

$39.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$4.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$4.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$16.49

Direct replacement – these replacement auto trans shift lever control rod bushings match the original equipment design on specified vehicles
Conveniently fix- simple solution to address worn bushings and restore original performance and feel
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$47.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$22.99

Design type: spring loaded; double-lip
Temperature: -20 Deg. F to 300 Deg. F /-29 Deg. C to 49 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

In-Demand Universal Joints for 2011 Jeep Compasses

Select from 9 premium Universal Joints parts for your 2011 Jeep Compass, with prices ranging from $10.99 to $289.99.

show more show less

from

$44.99

Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$59.99

Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.

from

$109.99

Yukon 1310 to Mechanics 3R adapter U/Joint.

from

$61.99

Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.

from

$226.99

Yukon yoke for Chrysler 7.25″ and 8.25″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 7.25″ and 8.25″
27 spline
1310 u-joint size
Outside snap ring design
3.219″ snap ring span
1.062″ cap diameter
Strap style

from

$53.99

1330 Yukon Lifetime U/Joint. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$57.99

1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.

from

$289.99

Fits Chrysler 8.25″
27 spline
1310 u-joint size
Outside snap ring design
3.219″ snap ring span
1.062″ cap diameter
Strap style

from

$10.99

7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:

U-Joint strap bolt
Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
7290 u-joint size

Most Sold 2011 Jeep Compass Differentials

Explore our best-selling Jeep parts for the 2011 Compass among 57 OEM and aftermarket options starting from $2.99.

show more show less

from

$19.99

Mobil 1 Synthetic Gear Lubricant LS 75W-90 is a supreme, multi-purpose automotive gear lubricant that helps to provide exceptional thermal stability and resistance to high temperature oxidation, extending gear life due to minimal deposits. Helps to deliver outstanding protection against low speed/high torque wear with the capability to handle severe driving conditions while delivering smooth efficient performance. Mobil 1 Synthetic Gear Lubricant LS provides exceptional shear stability, corrosion protection, and enhanced frictional properties. Compared to conventional hypoid gear lubricants, Mobil 1 LS 75W-90 performs exceptionally over a wide range of temperatures to reduce wear at start up. Mobil 1 gear lube helps to minimize leakage and reduce contamination while providing good resistance to foaming to maintain film strength for reliable lubrication. Meets or exceeds the requirements of the following industry specifications: API GL-5.

Product Features:

Mobil 1 LS synthetic automotive gear lubricant exceeds the highest level of performance requirements of modern passenger vehicles
Helps to provide exceptional thermal stability and resistance to high temperature oxidation and extend gear life due to minimal deposits
Delivers outstanding protection against low speed/high torque wear, handling severe driving conditions with smooth, efficient performance
Compared to conventional hypoid gear lubricants, performs exceptionally over a wide range of temperatures to reduce wear at start up
Provides exceptional shear stability, corrosion protection, and enhanced frictional properties
Manufacturer Part Number: 104361

from

$14.79

Product Features:

Technologically advanced, full synthetic formulation provides superior transmission life
Engineered with superior base oils to ensure superb low and high temperature performance
Certified and approved for all Chrysler cars and trucks that require ATF+4«, Mopar ATF+3«, ATF+2«, ATF+2 Type 7176«, or ATF+«
Meets or Exceeds Fiat Chrysler ATF+4« requirements.
Packaged in a convenient 1-quart size for easy handling and precise application during maintenance.

from

$7.99

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$2.99

Product Features:

CRUSH SLEEVE 7.25 & 8.25 MIN ORDER 5000

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$37.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$8.49

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$18.99

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

from

$36.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$10.99

Crush Sleeve for Model 35, Chrysler 7.25″, 8.25″ Ford 8″ & GM 7.75″. Approx 0.495″ long.

Product Features:

Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
0.495″ tall

from

$7.99

Product Features:

CHRY 8 3/4″ RING GEAR BOLTS C 8.25″

from

$8.99

Ring gear bolt for C200F front and ’05 7 up Chrysler 8.25″ rear.

Product Features:

Ring gear bolt for 2005 and up Chrysler 8.25″

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$10.99

Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

Product Features:

Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
7/8″ x 14 thread

from

$26.99

Product Features:

Pinion nut
Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion

from

$209.99

Product Features:

Spider gear kit
Fits Chrysler 8.25″ 29 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$15.99

Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:

Side adjuster lock bolt
Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″

from

$505.99

from

$78.99

Fits 1976 and up Chrysler 8.25″
Includes carrier bearings and races

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$275.99

Product Features:

CHRY 10BLT 8.25+8.36 R&P-4.56 RATIO

from

$469.99

Ring/Pinion Sets

from

$288.99

Product Features:

CHRY 10BLT 8.25+8.36 R&P-3.55 RATIO

from

$65.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
For Years: 2007-2017
Weight approx: 2 Lbs

Top-Rated Drivetrains Brands For Your 2011 Jeep Compass

Shop for the best-rated brands offering Drivetrains and other products for your 2011 Jeep Compasses. Below you’ll find some of our best rated Drivetrains from Castrol, Carquest Premium, and Motive Gear, and more. Drivetrains from these brands that fit a 2011 Compass start at just $2.99 and are rated as high as 4.9 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Castrol 2011 Jeep Compass Drivetrains

When it comes to maintaining or upgrading your 2011 Jeep Compass, using quality Drivetrains is essential to ensure durability and a perfect fit. Castrol ticks all of those boxes. We offer a wide selection of Castrol Drivetrains, specifically designed for the 2011 Jeep Compass. With over 1 Castrol brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.79. Plus, with over 146 customer reviews and an average rating of 4.9 stars, you can trust that our Castrol Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $14.79

(146)

Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart

“Perfect”

Popular Carquest Premium 2011 Jeep Compass Drivetrains

Carquest Premium auto parts is one of the highest quality Drivetrain brands in the market. Any 2011 Jeep Compass owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2011 Compass, Advance Auto Parts carries a full inventory of 3 Carquest Premium Drivetrains. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Carquest Premium Drivetrains range from $107.99 to $135.99, plus, with more than 16 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $107.99

(9)

CV Axle Shaft Assembly

“Great product! Easy to install! Fixed the issue!!”

from $135.99

(5)

CV Axle Shaft Assembly

“so far so good, fit perfect, service was great”

from $118.99

(2)

CV Axle Shaft Assembly

“Enjoying the fact that my car is running a lot smoother I am thankful that everything is been made easy through your online ordering made my life a lo”

FAQs for 2011 Jeep Compass Drivetrains

Which Drivetrains are best-sellers for 2011 Jeep Compasses?

Out of 90 Drivetrains that fit 2011 Jeep Compasses, the following parts are the top sellers:

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (12507273) – $18.99
CV Axle Shaft Assembly (10612181) – $107.99
CV Axle Shaft Assembly (10612185) – $135.99

What’s the price range for 2011 Jeep Compass Drivetrains?

Drivetrain prices for the 2011 Jeep Compass start at $2.99 and go up to $1,109.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2011 Jeep Compass?

The average price for Drivetrains for the 2011 Jeep Compass is $174.29. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Jeep Compass model years?

Yes, we currently carry Drivetrains for 17 model years of Jeep Compasses between 2007 and 2025. Drivetrains are bought most frequently for the following model years: 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Drivetrains for my 2011 Jeep Compass?

The cheapest 2011 Jeep Compass Drivetrains we carry in stock are:

Differential Crush Sleeve (20520219) – $2.99
Manual Transmission Input Shaft Seal (18444168) – $4.49
OE Replacement (11900908) – $4.99
Standard Spindle Nut M22-1.5 Hex Size 32mm (sold by each) (22149131) – $6.29
Cross Pin Bolt (11643346) – $6.99

What are the top-rated Drivetrains that fit the 2011 Jeep Compass?

Out of 2,210 reviews by customers, our 2011 Jeep Compass Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2011 Jeep Compass and their top-rated products:

Differentials
- Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart (8140018) – $14.79
- Differential Crush Sleeve (20520219) – $2.99
- Differential Pinion Shim Kit (20520100) – $7.99

What types of Drivetrains do you sell for my 2011 Jeep Compass?

As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 2011 Jeep Compass:

Can I get help with 2011 Jeep Compass Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Drivetrains and more.

What is your return policy for Jeep Compass Drivetrains?

Advance Auto Parts keeps returns simple. For new Jeep Compass Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2011 Jeep Compass Drivetrains

Yukon Gear – Crush Sleeve (Part No.33093)

National – Shaft Repair Sleeve (Part No.99210)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Yoke For Chrysler 7.25" And 8.25" With A 7290 U/Joint Size (Part No.41005)

National – Transfer Case Extension Housing Seal (Part No.711135)

Yukon Gear – Carrier Installation Kit For ’76 & Up Chrysler 8.25" Rear (Part No.57014)

Yukon Gear – Bearing Race Driver (Part No.56022)

Dorman – Help – Transfer Case Shifter Bushing (Part No.14797)

National – Differential Pinion Seal (Part No.711053)

Yukon Gear – Yoke For Chrysler 8.25" With A 1310 U/Joint Size (Part No.41010)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Dorman – Standard Spindle Nut M22-1.5 Hex Size 32mm (sold by each) (Part No.615-079)

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Yukon Gear – Round Companion Flange For Jeep Liberty Rear, Chrysler 8.25" (Part No.41120)

Yukon Gear – Ring Gear Bolt For C200F Front And ’05 7 Up Chrysler 8.25" Rear (Part No.33032)

Yukon Gear – Master Overhaul Kit For Chrysler ’05 & Up 8.25" Differential (Part No.14204)

Powertrax – Grip LS Traction System (Part No.LS308229)

Motive Gear – Differential Ring and Pinion (Part No.C8.25-355)

Anchor – Differential Motor Mount: Right, 1 Piece (Part No.3462)

Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)

Yukon Gear – C/Clip (Part No.33083)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.5105309AB)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Yukon Gear – 8.25" Chrysler, Model 35, D36 Ica, & Dana 28 Tracloc Clutch Set (Part No.16147)

National – Multi-Purpose Seal (Part No.710396)

Yukon Gear – Minor Install Kit For Chrysler 76 & Up 8.25" Differential (Part No.12004)

Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

Needa Parts – Standard Engine Oil Drain Plug: 7/8 " -16 Thread, 1-1/8 " Head (sold by each) (Part No.090-018)

Dorman – Standard Spindle Nut M22-1.5 Hex Size 32mm (sold by each) (Part No.615-079)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82017)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82020)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82022)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82018)

Yukon Gear – C/Clip (Part No.33083)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV729451)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV729461)

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-3002)

Dorman – Drive Shaft (Part No.946-309)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Round Companion Flange For Jeep Liberty Rear, Chrysler 8.25" (Part No.41120)

Yukon Gear – Yoke For Chrysler 7.25" And 8.25" With A 7260 U/Joint Size (Part No.41003)

Carquest Premium – CV Axle Assembly (Part No.NCV12136)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.5105309AB)

National – Shaft Repair Sleeve (Part No.99139)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.68064273AB)

National – Manual Transmission Input Shaft Seal (Part No.471648)

Dorman – Help – Transfer Case Shifter Bushing (Part No.14797)

National – Shaft Repair Sleeve (Part No.99210)

National – Transfer Case Extension Housing Seal (Part No.711135)

Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)

Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)

Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)

Yukon Gear – Yoke For Chrysler 7.25" And 8.25" With A 1310 U/Joint Size (Part No.41004)

Yukon Gear – 1330 Lifetime U/Joint (Part No.42004)

Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)

Yukon Gear – Yoke For Chrysler 8.25" With A 1310 U/Joint Size (Part No.41010)

Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)

Mobil 1 – 75W-90 Full Synthetic Gear Lubricant, Extends Gear Life, 1 Quart (Part No.26101)

Castrol – Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart (Part No.15A9FA)

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Motive Gear – Differential Crush Sleeve (Part No.3507575)

National – Multi-Purpose Seal (Part No.710396)

National – Shaft Repair Sleeve (Part No.99157)

Motive Gear – Pinion Nut (Part No.1260823)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

National – Multi-Purpose Bearing (Part No.32008)

Yukon Gear – Crush Sleeve (Part No.33093)

Motive Gear – Ring Gear Bolt (Part No.1304)

Yukon Gear – Ring Gear Bolt For C200F Front And ’05 7 Up Chrysler 8.25" Rear (Part No.33032)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Yukon Gear – Pinion Nut (Part No.33142)

Yukon Gear – Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25" (Part No.33253)

USA Standard Gear – Open Spider Gear Set For Chrysler 8.25", 29 Spline (Part No.39003)

Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

Powertrax – Grip LS Traction System (Part No.LS308229)

Yukon Gear – Carrier Installation Kit For ’76 & Up Chrysler 8.25" Rear (Part No.57014)

Yukon Gear – The Carrier Bearing Puller (Part No.56072)