2011 Jeep Compass Body Parts

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

New Standard Replacement Driver Side Fender Liner

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

New Standard Replacement Passenger Side Fender Liner

“For some, it’s more than just a drive. It’s about definition — finding the rush that comes with your hands on the wheel and your foot on the gas — and it starts by stepping into your vehicle with confidence. ARIES AeroTread running boards give new definition to your drive with their sleek design, full-length treads and flawless finish. They feature unencumbered aluminum construction and a custom contour to redefine your look and offer a solid step up. Made specifically for today’s crossover and SUV, ARIES AeroTread running boards are marked for their aerodynamic look and lightweight build. They are constructed from an extruded aluminum base, making them strong and impervious to the elements. Each set of running boards features sleek, curved edges with tapered ends to seamlessly blend with the body of your vehicle. To give you the exact, customized look you want, AeroTread running boards come with one of two front-trim finish options: polished stainless steel or black carbide powder-coated stainless steel. They are also equipped with a 5″” wide, hard plastic step pad that runs the entire length of the board, providing a non-skid surface no matter where you place your foot. AeroTread running boards install using a track mounting system to attach vehicle-specific brackets, and pre-existing holes in the vehicle’s frame are used to eliminate drilling, speed up installation and ensure stable footing (NOTE: Mounting brackets are sold separately, see the application information to determine which brackets and boards fit your vehicle). The mounting brackets are made from steel and are coated in a powder coat finish for long-lasting dependability. Whatever road you choose, define your drive with ARIES AeroTread running boards.”

“For some, it’s more than just a drive. It’s about definition — finding the rush that comes with your hands on the wheel and your foot on the gas — and it starts by stepping into your vehicle with confidence. ARIES AeroTread running boards give new definition to your drive with their sleek design, full-length treads and flawless finish. They feature unencumbered aluminum construction and a custom contour to redefine your look and offer a solid step up. Made specifically for today’s crossover and SUV, ARIES AeroTread running boards are marked for their aerodynamic look and lightweight build. They are constructed from an extruded aluminum base, making them strong and impervious to the elements. Each set of running boards features sleek, curved edges with tapered ends to seamlessly blend with the body of your vehicle. To give you the exact, customized look you want, AeroTread running boards come with one of two front-trim finish options: polished stainless steel or black carbide powder-coated stainless steel. They are also equipped with a 5″” wide, hard plastic step pad that runs the entire length of the board, providing a non-skid surface no matter where you place your foot. AeroTread running boards install using a track mounting system to attach vehicle-specific brackets, and pre-existing holes in the vehicle’s frame are used to eliminate drilling, speed up installation and ensure stable footing (NOTE: Mounting brackets are sold separately, see the application information to determine which brackets and boards fit your vehicle). The mounting brackets are made from steel and are coated in a powder coat finish for long-lasting dependability. Whatever road you choose, define your drive with ARIES AeroTread running boards.”

New Standard Replacement Driver Side Fender Brace

New Standard Replacement Passenger Side Fender Brace

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

New CAPA Certified Premium Replacement Driver Side Fender, Made Of Galvanized Steel

New CAPA Certified Premium Replacement Passenger Side Fender

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Auveco products provide OE fit and function.

Auveco products provide OE fit and function.

Auveco products provide OE fit and function.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Auveco products provide OE fit and function.

Lift supports are pressurized cylinders that are used to support hoods, hatches & rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

“Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “”bouncing”” or “”Jumping”” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!”

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

New Economy Replacement Hood Panel EXTERNAL SUPPLY>FDO>BACK ROOM-FDO>APPLICATION SPECIFIC from KAI

“Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “”bouncing”” or “”Jumping”” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!”

This direct-replacement hood prop rod clip matches the original equipment specifications to ensure reliable fit and function for this application. Made of quality materials, it is a cost-effective alternative to the dealer part.

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Auveco products provide OE fit & function.

Want a new exterior door handle that matches the original, for far less than going back to the dealership, This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Want a new exterior door handle that matches the original, for far less than going back to the dealership, This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Want a new exterior door handle that matches the original, for far less than going back to the dealership, This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

This liftgate latch handle is designed to match the fit and function of the original handle on specified vehicles, and is engineered for durability and reliable performance.

Want a new interior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Want a new interior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Want a new exterior door handle that matches the original, for far less than going back to the dealership, This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Want a new interior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Want a new interior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Want a new exterior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Want a new exterior door handle that matches the original, for far less than going back to the dealership, This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Want a new exterior door handle that matches the original, for far less than going back to the dealership, This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Want a new exterior door handle that matches the original, for far less than going back to the dealership, This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Want a new exterior door handle that matches the original, for far less than going back to the dealership, This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

AISIN Window Regulator Assemblies and Motors are mechanical and electrical components that work together to raise and lower the power windows in a vehicle. The window regulator assembly is the mechanical component that consists of gears, tracks and other parts that move the window up and down. The electric motor is the component that provides the power to move the window. Together, they form the power window system that allows the driver and passengers to easily raise and lower the windows with the push of a button.

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

This door hinge screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Door Switch is a versatile component that can control various functions such as door locks, windows, or side mirrors. Whether used for a single function or multiple operations, it offers reliable control and enhances the driver’s convenience. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

The Door Lock Actuator is typically an electrical driven device that will remotely operate the vehicles door locks. The actuator may be controlled by a switch inside the vehicle but may also be operated by a controller allowing the vehicle operator to unlock the doors without touching the vehicle using a key fob device.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.