2011 Hyundai Sonata Steering and Chassis Parts
Find Your Specific 2011 Hyundai Sonata Steering and Chassis Parts
Below you will find various in-demand Hyundai Steering and Chassis Parts, components and accessories for your 2011 Sonata. Advance Auto Parts has popular Sonata parts like Sway Bars, Power Steering Parts, Tie Rods and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Sonata model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2011 Hyundai Sonata Steering and Chassis Parts below and start saving instantly.
Popular 2011 Hyundai Sonata Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 2011 Hyundai Sonatas
Carquest Premium – Ball Joint (Part No.410-234710)
from
$31.99
Product Features:
See More
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
MOOG – Alignment Camber Bolt Assortment (Part No.CAM1A)
from
$438.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Dorman – Knuckle (Part No.686-453)
from
$331.99
When an original equipment wheel hub assembly is due for replacement on certain Kia Optima vehicles, the job can become difficult because rust has grown between the surfaces of the steering knuckle and the wheel hub bearing, ultimately resulting in the two assemblies seizing together. Although this problem is common in Salt Belt regions, it can also occur over time under normal vehicle use and when it does it can make the knuckle challenging or impossible to salvage. This Dorman OE FIX steering knuckle features a patented and proprietary coating that helps prevent corrosion between surfaces, providing a more permanent and reliable repair than the factory knuckle design.
Product Features:
See More
Product Features:
- Improved design – this steering knuckle has a proprietary coating that helps prevent rust forming between surfaces, providing a more permanent and reliable repair than the OE knuckle design
- Direct replacement – engineered to match the performance of the original equipment steering knuckle
- Location-specific – designed for the front left side of specified Kia Optima vehicles
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Driveworks – Camber Bolt Kit (Part No.DW-K90474)
from
$20.49
Driveworks Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. Driveworks Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Chassis parts have been engineered and manufactured under the proven quality systems. Driveworks Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.
Product Features:
See More
Product Features:
- Designed to meet OE Form, Fit, and Function.
- Performance tested to ensure durability and reduce tire wear.
- Precision engineered for improved ride and steering response.
- Hardware included for ease of installation (where applicable)
Rare Parts – Rack & Pinion Bellows (Part No.RP57363)
from
$14.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK621592)
from
$174.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Alignment Camber / Toe Kit (Part No.K100392)
from
$37.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Provides adjustment for camber and caster changes
- Easy to install
- Construction and design validated by MOOG engineers
- Provides improved steering and handling feel
- Long-lasting performance
- Broad coverage for foreign and domestic applications
MOOG – Suspension Ball Joint (Part No.K7452)
from
$117.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Premium forged housing with increased cross section of up to 52% more material in key areas
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
Dorman – Flexible Steering Coupler (Part No.926-990)
from
$22.99
This flexible steering coupler matches the fit and function of a cracked, worn or deteriorated original equipment coupler. Made of tough materials for durable, reliable performance, this part has undergone extensive testing to ensure a proper fit.
Product Features:
See More
Product Features:
- Ideal replacement – this flexible steering coupler matches the fit and function of the original equipment coupler for a direct replacement
- Durable construction – this steering coupler is made of quality materials to withstand the requirements of managing steering forces
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
- Extensively tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
Rare Parts – Cam Bolt Kit (Part No.RP17386)
from
$49.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves vehicle handling
- Restores OE alignment
- Improves steering geometry
- Easy camber adjustment
Rare Parts – CAM BOLT KIT (Part No.RP16745)
from
$48.99
CAM BOLT KIT
Rare Parts – Sway Bar Link (Part No.RP15524)
from
$93.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Carquest Premium – Stabilizer Bar Link (Part No.512-94867)
from
$45.49
Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating on steel links to reduce rust and extend service life
- Hex formed studs for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Hardware included for easier installation (where applicable)
Rare Parts – Sway Bar Bushing (Part No.RP16777)
from
$33.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Frame Bushing (Part No.RP19475)
from
$38.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
MOOG – Alignment Toe Adjuster (Part No.K100401)
from
$29.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Returns like-new steering
- Long-lasting performance
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
MANDO – Steering Tie Rod End (Part No.15N0090)
from
$21.99
Tie Rod Ends are critical suspension components linking the power steering rack to the wheel housing, designed to create stability in proper control and steering. Normal mileage over time and/or even damage (resulting from external impact) may cause the tie rod end bushings to experience excessive play. Excessive tie rod end play may eventually lead to alignment issues causing steering & abnormal tire damage – cupping or rapid tread wear may cause unwanted vibration issues that may affect proper steering ability or create other issues. HL HL Mando tie rod ends are high-quality aftermarket replacements specifically designed for Hyundai KIA, and Genesis vehicles, ensuring reliable performance and durability. Trust in HL Mando for your aftermarket needs!
Product Features:
See More
Product Features:
- Original Equipment Steering Rack & Pinion
- 100% Direct Replacement. Ready to Install
- Manufactured in Korea
Rare Parts – Tie Rod End (Part No.RP28336)
from
$59.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Mounting Kit System (Part No.226201)
from
$11.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Dorman – Loaded Knuckle (OE Fix) (Part No.698-462)
from
$672.99
Fixing a worn wheel bearing would traditionally require a difficult procedure using a hydraulic press, or purchasing multiple components. This Dorman OE FIX loaded knuckle includes all critical components already assembled for a fast, simple, safe install. For repair shops, that makes it less likely that you will have a vehicle stuck in the service bay. For vehicle owners, that makes this formerly complex job requiring special equipment much easier.
Product Features:
See More
Product Features:
- Pre-pressed assembly – this complete loaded knuckle kit includes all necessary components ready for installation right out of the box
- Saves hours – eliminates the possibility of extended time spent wrestling with individual corroded components
- Simpler solution – no need for hydraulic press to perform complete bearing repair, making replacement faster and more predictable for both professionals and DIYers
- Quality engineering – designed in the United States and backed by a century of automotive aftermarket experience
Dorman – Loaded Knuckle (OE Fix) (Part No.698-463)
from
$672.99
Fixing a worn wheel bearing would traditionally require a difficult procedure using a hydraulic press, or purchasing multiple components. This Dorman OE FIX loaded knuckle includes all critical components already assembled for a fast, simple, safe install. For repair shops, that makes it less likely that you will have a vehicle stuck in the service bay. For vehicle owners, that makes this formerly complex job requiring special equipment much easier.
Product Features:
See More
Product Features:
- Pre-pressed assembly – this complete loaded knuckle kit includes all necessary components ready for installation right out of the box
- Saves hours – eliminates the possibility of extended time spent wrestling with individual corroded components
- Simpler solution – no need for hydraulic press to perform complete bearing repair, making replacement faster and more predictable for both professionals and DIYers
- Quality engineering – designed in the United States and backed by a century of automotive aftermarket experience
Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2418)
from
$339.99
CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.
Product Features:
See More
Product Features:
- Protective coating applied to each unit to extend the life of the unit (where applicable).
- 100 percent performance testing to ensure perfect fit, function and reliable performance.
- 100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
- 100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
- Valve housings have polished micro-finish sleeves for durability (where applicable).
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
MANDO – New OE Steering Rack Pinion Assembly, Direct Replacement (Part No.14A1036)
from
$429.99
Rack & Pinion Assembly failures are usually associated with high mileage wear or power steering pump & fluid contamination, and usually shows signs of hydraulic fluid leak, abnormal tightness at the steering wheel, or sometimes even grinding noises during normal steering. Your vehicle’s power steering rack is imperative to provide the ability to safely and easily steer the car. Electronic Power Steering (EPS) units are becoming the modern day norm with auto manufacturers. Unlike a hydraulic power steering system, an EPS system relies on a computer-controlled electric motor to operate – no longer needing assistance from an additional pump, fluid, belt, or pulley. But failures do occur within EPS systems, and it is highly encouraged to have it diagnosed by a professional right away should your EPS warning light illuminate. HL Mando Aftermarket offers brand new OE replacements rack & pinion & EPS units that are exactly like the one that originally came with your Hyundai or Kia – We Are OE!
Product Features:
See More
Product Features:
- Brand New OE – No Core Exchange Required
- Tested for Quality, Durability, and Reliability
- Direct Original Equipment Replacement
- Manufactured in Korea
Atlantic Automotive Eng – Remanufactured Rack & Pinion (Part No.3788)
from
$345.99
AAE Remanufactured Hydraulic Power Steering Rack & Pinions include inner tie rods and new bellows secured by OE stainless steel clamps. AAE remanufactures all units in the USA. AAE uses only the highest quality OE components in our remanufacturing process and each unit undergoes a thorough inspection & testing procedure. Every unit is 100% tested to the strictest standards in the industry to ensure the customer is purchasing a quality product. Each unit is electrostatically painted with automotive grade paint to ensure long lasting finish to protect the unit in any driving condition. To ensure long life and OE performance & operation, please flush and fill steering system with OE approved power steering fluid.
Product Features:
See More
Product Features:
- Manufactured Again Certified quality process
- Each unit is 100% hydraulically tested for pressure and flow.
- Racks are remanufactured with OE grade, high temperature seals and O-rings for increased durability and performance.
MOOG – Strut Alignment Camber Kit (Part No.K9757)
from
$43.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Camber Kit (Part No.K928)
from
$24.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Camber Kit (Part No.K90473)
from
$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Upgrade your 2011 Hyundai Sonata with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 2011 Hyundai Sonata, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Hyundai or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Sonata functioning at its best. At Advance Auto Parts, we offer a wide selection of 82 Steering and Chassis Parts for the 2011 Hyundai Sonata, designed to meet your needs without breaking the bank.
From
Sway Bar
replacements to
Power Steering Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2011 Hyundai Sonata at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $9.99 to $728.99, with
an average price of $134.30.
Our 82 Steering and Chassis Parts in stock come from 7 trusted brands, so you’re sure to find the right part for your 2011 Hyundai Sonata without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Hyundai Sonata, we stock popular OEM and aftermarket Steering and Chassis Parts from top names
like Moog, Carquest Premium, Imperial, and more.
Moog Steering and Chassis Parts
start at just $59.99 and boast an impressive 4.5 stars average rating from customers.
Carquest Premium and Imperial also bring quality to the table, with Steering and Chassis Parts available starting at $11.99, and at an average 4.4 stars rating.
With 1,610 customer reviews and counting, our 2011 Hyundai Sonata Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2011 Hyundai Sonata is always ready to roll. We’re committed to providing you with everything you need to keep your Sonata in top shape, all in one place.
Start shopping confidently below for your 2011 Hyundai Sonata!
Best-Selling Sway Bars for 2011 Hyundai Sonatas
Enhance the driving experience in your Hyundai with 17 quality Sway Bar components, starting at $19.99.
Carquest Premium – Stabilizer Bar Link Kit (Part No.510-498402)
from
$37.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Carquest Premium – Stabilizer Bar Link Kit (Part No.510-498476)
from
$28.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
MOOG – Suspension Stabilizer Bar Link (Part No.K750436)
from
$65.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG – Suspension Stabilizer Bar Link (Part No.K750603)
from
$52.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Carquest Premium – Stabilizer Bar Link Kit (Part No.510-498475)
from
$28.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
MOOG – Suspension Stabilizer Bar Link (Part No.K750437)
from
$65.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Carquest Premium – Stabilizer Bar Link Kit (Part No.510-498401)
from
$37.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Carquest Premium – Stabilizer Bar Link (Part No.512-424308)
from
$33.49
Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating on steel links to reduce rust and extend service life
- Hex formed studs for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Hardware included for easier installation (where applicable)
MOOG – Suspension Stabilizer Bar Link (Part No.K750611)
from
$66.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG – Suspension Stabilizer Bar Link (Part No.K750610)
from
$66.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K202034)
from
$21.29
Product Features:
See More
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Rare Parts – Sway Bar Link (Part No.RP19956)
from
$86.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Link (Part No.RP19957)
from
$82.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Link (Part No.RP22132)
from
$95.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Link (Part No.RP22318)
from
$37.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Link (Part No.RP22317)
from
$37.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K202013)
from
$19.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- RESTORES RIDE — Provides revamped steering and handling feel
- QUIET DRIVE — Replacement can reduce rear end noise
Most Popular 2011 Hyundai Sonata Power Steering Parts
Customize your Hyundai with 8 Power Steering Parts products
like Rack & Pinions,
Power Steering Coolers, and
Rack and Pinion Boots, all
priced under $451.99.
Imperial – Mounting Kit System (Part No.226201)
from
$11.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Rare Parts – Rack & Pinion Bellows (Part No.RP57363)
from
$14.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
Cardone – Remanufactured Rack and Pinion Assembly (Part No.1G-2403)
from
$451.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100 percent replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Remanufactured Rack and Pinion Assembly (Part No.1G-2414)
from
$451.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100 percent replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Remanufactured Electronic Power Rack and Pinion Complete Unit (Part No.24-2403)
from
$375.99
A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- Protective coating applied to each unit, where applicable, to extend the life of the unit
- 100% performance testing to ensure perfect fit, function and reliable performance
- 100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
- 100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
- Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
- Valve housings, where applicable, have polished micro-finish sleevings for durability
- Built to meet or exceed O.E.M. performance
Dorman – RACK BELLOW (Part No.541-505)
from
$34.99
RACK BELLOW
Top Picks for 2011 Hyundai Sonata Tie Rods
Upgrade Hyundai Sonatas with top-quality Tie Rods parts, including 13 OEM and aftermarket selections for your 2011 model.
MOOG – Steering Tie Rod End (Part No.ES800718)
from
$59.99
Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Steering Tie Rod End (Part No.ES800717)
from
$59.99
Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Steering Tie Rod End (Part No.EV800974)
from
$62.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Polished Stud ball provides low socket torque.
- Stud design is optimized to provide ideal stud swing and strength for each application.
MOOG – Steering Tie Rod End (Part No.EV800695)
from
$54.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Assembled in the USA
- TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening
Carquest Premium – Tie Rod End (Part No.310-498433)
from
$34.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Carquest Premium – Tie Rod End (Part No.310-498430)
from
$34.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Carquest Premium – Tie Rod End (Part No.300-498427)
from
$35.99
Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating to reduce rust and extend service life
- Hex formed studs and/or wrench flats for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Inner tie rod ends are supplied with thread locking compound
- Hardware included for easier installation (where applicable)
Rare Parts – Tie Rod End (Part No.RP29486)
from
$54.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP29472)
from
$129.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP29162)
from
$99.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP29473)
from
$99.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP29144)
from
$83.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Carquest Premium – Tie Rod End (Part No.300-498428)
from
$20.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Thread locking compound included.
In-Demand Ball Joints for 2011 Hyundai Sonatas
Select from 23 premium Ball Joints parts for your 2011 Hyundai Sonata, with prices ranging from $36.99 to $681.99.
MOOG – Suspension Ball Joint (Part No.K500231)
from
$61.99
Product Features:
See More
- DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
- PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
Carquest Premium – Ball Joint (Part No.410-498365)
from
$37.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Pre-applied threadlocker keeps fasteners from loosening due to vibration
MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK622825)
from
$126.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Suspension Ball Joint (Part No.K500239)
from
$89.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Dorman – Suspension Control Arm (Part No.522-816)
from
$246.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.522-815)
from
$246.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK622826)
from
$123.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Dorman – Suspension Control Arm (Part No.524-120)
from
$109.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Rare Parts – Ball Joint (Part No.RP12940)
from
$119.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Dorman – Suspension Control Arm (Part No.524-119)
from
$189.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK622367)
from
$543.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK621592)
from
$174.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Rare Parts – Ball Joint (Part No.RP12942)
from
$91.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Carquest Premium – Lower Ball Joint (Part No.410-17997)
from
$36.99
Carquest Premium ball joints are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium ball joints utilize the same ball joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all ball joints to reduce rust. Each part number in the Carquest Premium ball joint line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating to reduce rust and extend service life
- Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
- Hardware included for easier installation (where applicable)
MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK622368)
from
$502.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear salt road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK621593)
from
$154.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Carquest Premium – Control Arm with Ball Joint (Part No.810-498471B)
from
$246.99
Carquest Premium control arms are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium control arms are built to match OE construction with steel or aluminum, and where applicable ball joints that are either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. The steel control arms feature a corrosion-resistant coating to reduce rust for a longer lasting part. Each part number in the Carquest Premium control arm line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Application specific, direct fitment for trouble-free installation
- Corrosion-resistant coating on steel control arms to reduce rust and extend service life
- Pre-installed ball joints and bushings (when applicable) for easy installation
- Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
- Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
- Hardware included on many applications for easier installation
MOOG – Rear Upper Forward Suspension Control Arm and Ball Joint Assembly (Part No.RK622764)
from
$68.99
Product Features:
See More
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Dorman – Suspension Control Arm (Part No.524-695)
from
$681.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.524-696)
from
$681.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Carquest Premium – Lower Control Arm with Ball Joint (Part No.810-498472B)
from
$246.99
Carquest Premium control arms are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium control arms are built to match OE construction with steel or aluminum, and where applicable ball joints that are either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. The steel control arms feature a corrosion-resistant coating to reduce rust for a longer lasting part. Each part number in the Carquest Premium control arm line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Application specific, direct fitment for trouble-free installation
- Corrosion-resistant coating on steel control arms to reduce rust and extend service life
- Pre-installed ball joints and bushings (when applicable) for easy installation
- Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
- Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
- Hardware included on many applications for easier installation
MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK623566)
from
$92.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK623565)
from
$92.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Most Sold 2011 Hyundai Sonata Steering Columns
Explore our best-selling Hyundai parts for the 2011 Sonata among 1 OEM and aftermarket options starting from $22.99.
Dorman – Flexible Steering Coupler (Part No.926-990)
from
$22.99
This flexible steering coupler matches the fit and function of a cracked, worn or deteriorated original equipment coupler. Made of tough materials for durable, reliable performance, this part has undergone extensive testing to ensure a proper fit.
Product Features:
See More
Product Features:
- Ideal replacement – this flexible steering coupler matches the fit and function of the original equipment coupler for a direct replacement
- Durable construction – this steering coupler is made of quality materials to withstand the requirements of managing steering forces
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
- Extensively tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
Top-Rated Steering and Chassis Parts Brands For Your 2011 Hyundai Sonata
Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2011 Hyundai Sonatas. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, Carquest Premium, and Imperial, and more. Steering and Chassis Parts from these brands that fit a 2011 Sonata start at just $11.99 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Moog 2011 Hyundai Sonata Steering and Chassis Parts
When it comes to maintaining or upgrading your 2011 Hyundai Sonata, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2011 Hyundai Sonata. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $59.99, with an average price of just $60.66. Plus, with over 23 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$61.99
(2)
Suspension Ball Joint
“Perfect fix, in stock and a quality product (MOOG). Recommend getting a pickle fork loaner to assist in removal!”
from
$59.99
(12)
Steering Tie Rod End
“Mechanic put two outside tie rods on my vehicle, 2011 Hyundai Sonata GLS. Took him 1-1/2 hours to take of the original rods and replace them. He count”
Popular Carquest Premium 2011 Hyundai Sonata Steering and Chassis Parts
Carquest Premium auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2011 Hyundai Sonata owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2011 Sonata, Advance Auto Parts carries a full inventory of 2 Carquest Premium Steering and Chassis Parts. Plus you will be keeping your Hyundai in peak condition while saving money because prices on these Carquest Premium Steering and Chassis Parts range from $28.99 to $37.99, plus, with more than 2 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.
from
$37.99
(1)
Stabilizer Bar Link Kit
“This Sway Bar Link 13.8 length great fit with 2012 Hyundai Sonata SE 2.4L. Completely got rid off the clucking noise but don’t know how long it will l”
from
$28.99
(1)
Stabilizer Bar Link Kit
“Depending on your build date on 2011 SE models with Sports Suspension this may work. Best to remove an old one and measure.”
FAQs for 2011 Hyundai Sonata Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 2011 Hyundai Sonatas?
Out of 82 Steering and Chassis Parts that fit 2011 Hyundai Sonatas, the following parts are the top sellers:
- Flexible Steering Coupler (11876593) – $22.99
- Tie Rod End (11919578) – $34.99
- Tie Rod End (11919600) – $34.99
What’s the price range for 2011 Hyundai Sonata Steering and Chassis Parts?
Steering and Chassis Part prices for the 2011 Hyundai Sonata start at $9.99 and go up to $728.99 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 2011 Hyundai Sonata?
The average price for Steering and Chassis Parts for the 2011 Hyundai Sonata is $134.30. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Steering and Chassis Parts for other Hyundai Sonata model years?
What are the cheapest Steering and Chassis Parts for my 2011 Hyundai Sonata?
The cheapest 2011 Hyundai Sonata Steering and Chassis Parts we carry in stock are:
- Camber Bolt Kit (10361666) – $9.99
- Mounting Kit System (6014844) – $11.99
- Rack & Pinion Bellows (12247032) – $14.49
- Suspension Stabilizer Bar Bushing Kit (12527178) – $19.99
- Camber Bolt Kit (10361721) – $20.49
What are the top-rated Steering and Chassis Parts that fit the 2011 Hyundai Sonata?
Out of 1,610 reviews by customers, our 2011 Hyundai Sonata Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2011 Hyundai Sonata and their top-rated products:
- Tie Rods
- Steering Tie Rod End (10412999) – $59.99
- Steering Tie Rod End (10225647) – $54.99
- Steering Tie Rod End (11239916) – $62.99
- Steering Knuckles
- Steering Tie Rod End (10412999) – $59.99
- Steering Tie Rod End (10225647) – $54.99
- Steering Tie Rod End (11239916) – $62.99
- Sway Bars
- Steering Tie Rod End (10412999) – $59.99
- Steering Tie Rod End (10225647) – $54.99
- Steering Tie Rod End (11239916) – $62.99
What types of Steering and Chassis Parts do you sell for my 2011 Hyundai Sonata?
As of 11/2/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2011 Hyundai Sonata:
Can I get help with 2011 Hyundai Sonata Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Hyundai Steering and Chassis Parts and more.
What is your return policy for Hyundai Sonata Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Hyundai Sonata Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
