2011 Honda Accord Crosstour Ignition and Tune-Up Products
More 2011 Honda Accord Crosstour Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2011 Honda Accord Crosstour, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2011 Honda Accord Crosstour Ignition and Tune-Up Products
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3733)
from
$25.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Delphi – Knock Sensor (Part No.AS10264)
from
$28.49
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
Encore Automotive – Genuine OE Ignition Knock (Detonation) Sensor (Part No.SKS-J50003)
from
$73.99
Encore Automotive Genuine OE knock sensor detects excessive/unusual pulses caused by the engine ignition and makes proper adjustments to reduce the risk of damaging pistons. Encore Automotive is dedicated to bringing the latest original equipment technologies to the Aftermarket to provide the highest overall value.
Product Features:
See More
Product Features:
- Genuine OE Part
- Highly accurate engine vibration detection
- Excellent material quality
NGK – Iridium IX Spark Plug: Single Iridium Fine Wire, LKR7DIX-11S (Part No.93175)
from
$11.99
NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.
Product Features:
See More
Product Features:
- SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IXUH22I (Part No.5356)
from
$13.29
Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).
Product Features:
See More
Product Features:
- World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
- Patented 360-degree laser welding assembly process
- U-groove and taper cut ground electrode to maximize flame propagation.
- Withstands temperatures greater than 4000° Fahrenheit
- Burnished nickel plating for high temperature endurance and superior corrosion resistance
- Wide range of part numbers for thousands of applications, including classic and collector cars
- Iridium Power
Champion – Iridium Spark Plug: Fine-Wire Electrode for Maximum Performance (Part No.9407)
from
$11.99
The Champion® Iridium spark plug is engineered for maximum performance with its premium iridium center electrode that delivers exceptional longevity. The fine-wire center electrode and V-trimmed ground electrode ensure greater ignitability and sharper spark focus. This spark plug maintains a stable operating temperature under all engine loads, thanks to its Heat-Active alloy that allows electrodes to reach optimal temperature quickly. With a flat seat type and resistor, the Champion Iridium spark plug is the ultimate choice for those seeking superior engine performance.
Product Features:
See More
Product Features:
- Champion Iridium – Maximum Performance. Premium Spark Plug
- Iridium center electrode delivers maximum life
- Fine-wire center electrode and V-trimmed for greater ignitability
- V-trimmed ground electrode promotes sharper spark focus
- Maintains stable operating temperature under all engine loads
- Heat-Active alloy allows electrodes to reach optimal temperature quickly
- Flat Seat Type: Designed with a flat seat type for a secure fit and optimal performance.
- Built-In Resistor: Includes a resistor to ensure superior engine performance and reduce electromagnetic interference.
ACDelco – Premium Double Platinum Tip Copper Core Spark Plug: Long-Lasting Performance & Durability (Part No.41-806)
from
$9.79
ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Product Features:
See More
Product Features:
- One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
- Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
- Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
- Resistor Type: Includes a resistor to reduce radio frequency interference, ensuring smooth engine performance.
- Flat Seat Type: Designed with a flat seat type for a secure and precise fit.
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7171)
from
$6.29
Coil On Plug Insulator Boot: Spring included, Designed for direct fit
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.49020)
from
$76.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1012)
from
$59.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Hitachi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005414197HIT)
from
$79.50
The Hitachi Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Enhances durability and increases energy transfer
- Reduces misfires, rough timing and intermittent starting
- High profile insulation to prevent arching
- Radio-Frequency Interference (RFI) Suppression
- Engineered to withstand extremes in temperatures
Carquest Premium – Ignition Coil (Part No.EBC1027)
from
$59.99
Carquest Premium engine management products provide the right ignition coils for a wide range of domestic and import applications. They deliver the highest performance and durability under demanding conditions. Designed to meet OE quality and performance standards using top-quality components, our ignition coils are the best choice for your maintenance and repair needs.
Product Features:
See More
Product Features:
- Coils are designed and engineered to be an OE quality replacement for fit and performance
- High-strength dielectric epoxy and 100% copper windings used to deliver high-temperature performance and vibration resistance
- High-efficiency laminations produce a high-energy spark and reliable performance
- Factories use ISO 9001 and IATF 16949 standards to deliver products designed to meet or exceed OE voltage output specifications
- Top-quality components and materials used to deliver maximum performance and long service life under tough operating conditions
Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1049)
from
$46.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Switch (Part No.CSC1808)
from
$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Ishino – Stone Spark Plug Tube Seal (Part No.A8027296550ISH)
from
$4.14
ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers.
Product Features:
See More
Product Features:
- Superb quality and precision manufacturing process to ensure overall sealing dependability
- Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
- Manufactured to exact OEM specifications
Popular 2011 Honda Accord Crosstour Ignition and Tune-Up Products Categories
2011 Honda Accord Crosstour Ignition and Tune-Up Products
You count on your 2011 Honda Accord Crosstour to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 28 Ignition and Tune-Up Products ranging in price from $4.14 to $79.50, you’re sure to find everything you need for your 2011 Honda Accord Crosstour.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 14 different brands like Autolite, Champion, and NGK. 2011 Honda Accord Crosstour Ignition and Tune-Up Products start as low as $4.14!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,110 extensive product reviews on 2011 Honda Accord Crosstour Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IXUH22I with 4.6 stars and OE Series Laser Iridium Spark Plug: Fine Wire Tip Design, ILZKR7B11 with 4.9 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2011 Honda Accord Crosstour below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2011 Honda Accord Crosstour
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Honda Accord Crosstour running right for years to come. In our inventory you’ll find brands like Autolite, Champion, NGK, and even more.
Popular Hitachi Ignition and Tune-Up Products
You’ll find popular Hitachi brand products across Ignition Coils and Boots. All are waiting to get your 2011 Honda Accord Crosstour back on the road. Some of the top-rated Hitachi products in these categories are:
Top-Rated Ignition and Tune-Up Products
If are what you’re looking for, our inventory holds plenty. We stock brand Ignition and Tune-Up Products for your 2011 Honda Accord Crosstour, and some of our most reviewed parts include:
FAQs for 2011 Honda Accord Crosstour Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2011 Honda Accord Crosstour?
Out of 28 Ignition and Tune-Up Products for the 2011 Honda Accord Crosstour, the most popular in our inventory are:
from
$9.99
(136)
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
from
$17.49
(117)
Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SXU22HCR11S
Spark Plugs
from
$14.99
This product is not rated
Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, LKR7AHX-S
Spark Plugs
What are the top-rated 2011 Honda Accord Crosstour Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 2011 Honda Accord Crosstour based on customer reviews/ratings are:
from
$13.29
(43)
Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IXUH22I
“right part first – time – car runs better with the refreshed plugs”
from
$19.99
(42)
OE Series Laser Iridium Spark Plug: Fine Wire Tip Design, ILZKR7B11
“Exact replacement for oem”
from
$9.79
(16)
Premium Double Platinum Tip Copper Core Spark Plug: Long-Lasting Performance & Durability
“Motor running smooth and strong”
