2011 GMC Sierra 2500 HD Fuel and Emissions Systems

Popular 2011 GMC Sierra 2500 HD Fuel and Emissions Systems Categories

Essential Fuel and Emissions Systems for 2011 GMC Sierra 2500 HDs

GM Genuine Parts – Vapor Canister Vent Valve Solenoid (Part No.214-2082)

Vapor Canister Vent Valve Solenoid

from

$139.99
GM Genuine Parts Vapor Canister Vent Solenoids are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These solenoids communicate with the valve to open and close, allowing air to pass in and out of the vapor canister vent. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Controls fresh air flow to the canister
  • Sends fuel vapors to the engine for re-burn
  • Helps control fuel tank pressure
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Exhaust Pressure Differential Sensor (Part No.213-3854)

Exhaust Pressure Differential Sensor

from

$88.99
ACDelco GM Original Equipment Exhaust Gas Differential Pressure Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

GM Genuine Parts – Diesel Emissions Fluid Level Sensor (Part No.20760381)

Diesel Emissions Fluid Level Sensor

from

$165.99
GM Genuine Parts Diesel Emissions Fluid Level Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Fuel Sending Unit Pigtail (Part No.645-221)

Fuel Sending Unit Pigtail

from

$52.99
This fuel sender connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel sender connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)

Nylon Nut - 1/4 In. (No.14)

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Exhaust Gas Recirculation Cooler (Part No.904-935)

Exhaust Gas Recirculation Cooler

from

$627.99
This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:
  • Direct replacement – this EGR cooler is made to match the fit and function of the original part on specific applications.
  • Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability.
  • Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Delphi – Manifold Absolute Pressure Sensor (Part No.PS10247)

Manifold Absolute Pressure Sensor

from

$61.99
Delphi MAP sensors use the latest OE technology; Internally protected against moisture intrusion and vibration; Manufactured to meet or exceed OE requirements for 100,000 miles.

Product Features:
  • Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
  • Internally protected against moisture intrusion and vibration
  • Long lasting and durable
  • Designed and engineered with Delphi expertise
See More

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1743)

Ambient Air Temperature Sensor

from

$31.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1022)

Exhaust Gas Recirculation (EGR) Valve

from

$129.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Fuel Injection Pressure Sensor (Part No.FPA1028)

Fuel Injection Pressure Sensor

from

$297.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

FAE – Engine Coolant Temperature Sensor (Part No.C6020175714FAE)

Engine Coolant Temperature Sensor

from

$22.13
The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Dorman – Fuel Line Connectors, Retainers & Repair Kits (Part No.800-123.5)

Fuel Line Connectors, Retainers & Repair Kits

from

$6.99
Fuel Line Connectors, Retainers & Repair Kits

GM Genuine Parts – Fuel Tank Lock Ring (Right) (Part No.TR26)

Fuel Tank Lock Ring (Right)

from

$12.99
GM Genuine Parts Fuel Tank Sender Retainers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These retainers help align and secure your vehicle’s fuel tank sender. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Help align and secure fuel tank sender
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Vapor Canister Vent Solenoid Connector (Part No.PTA1066)

Vapor Canister Vent Solenoid Connector

from

$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Mahle – Mahle EGR Valve Gasket (Part No.B7100225373MAH)

Mahle EGR Valve Gasket

from

$12.56
MAHLE Original gaskets provide world class sealing products trusted by OEM’s and Technicians around the globe. All MAHLE Original gaskets meet or exceed the original equipment specifications providing the finest sealing products available.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application-specific design ensures a perfect fit
  • MAHLE Original gaskets is the leader in Domestic, Asian and European applications
See More

Bosch – Fuel Rail (Part No.F00RL00591)

Fuel Rail

from

$216.99
Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.

Product Features:
  • Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.
  • End of line testing using the exact OE test specifications.
  • Guaranteed to provide OE performance and meet all emission specifications.
  • Continuous improvement, manufactured with the latest upgrades to components and specifications.
See More

GM Genuine Parts – Fuel Injection Throttle Body Mounting Gasket (Part No.12570168)

Fuel Injection Throttle Body Mounting Gasket

from

$7.99
GM Genuine Parts Fuel Injection Throttle Body Mounting Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help provide an air-tight seal between the throttle body and the intake manifold, and are GM-recommended replacements for your vehicle’s original components. Replace this gasket whenever you service the throttle body, as leaks can negatively affect the air/fuel ratio and compromise performance. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent excess air form entering the intake
  • Helps seal the intake and throttle from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Emission Reduction Fluid Front Inlet Pipe Assembly (Part No.22800969)

Emission Reduction Fluid Front Inlet Pipe Assembly

from

$270.99
GM Genuine Parts Diesel Exhaust Fluid (DEF) Injector Feed Lines are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Felpro – FUEL INJECTOR O-RING SET (Part No.ES 73178)

FUEL INJECTOR O-RING SET

from

$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

GM Genuine Parts – Fuel Pump Module Assembly without Fuel Level Sensor, with Seal (Part No.M10262)

Fuel Pump Module Assembly without Fuel Level Sensor, with Seal

from

$407.99
GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). Product contains Perfluorooctanoic acid (PFOA): Not for import into European Union (EU)

Product Features:
  • Helps provide a reliable fuel supply to your vehicle’s engine
  • Electrical connections are designed to help eliminate high resistance due to vehicle vibration
  • Designed to optimize pump life and reduce fuel pump noise
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Vapor Canister Purge Valve (Part No.214-1105)

Vapor Canister Purge Valve

from

$59.99
ACDelco GM Original Equipment Vapor Canister Purge Valves are GM-recommended replacements for your vehicle’s original components. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. These original equipment vapor canister purge valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Controls vapor flow from canister to engine
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest – Fuel Tank Straps (Includes 2 Straps) (Part No.578-183)

Fuel Tank Straps (Includes 2 Straps)

from

$35.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
  • Direct fit ensures safe, secure fuel tank installation
  • Product individually packaged and labeled to help reduce product damage prior to installation
  • Industry leading coverage on straps for plastic tanks
See More

ACDelco – GM Original Equipment Fuel Pump Control Module (Part No.E3006582160ACD)

GM Original Equipment Fuel Pump Control Module

from

$1012.93
The ACDelco GM Original Equipment Fuel Pump Control Module regulates the voltage supply to the electric fuel pump, and is a GM-recommended replacement for your vehicle’s original component. The control module receives an electrical signal from the engine control module that determines the voltage applied to the pump – this alters the pump motor speed and fuel pressure. This original equipment fuel pump control module has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Spectra Premium – Fuel Filler Neck (Part No.FN795)

Fuel Filler Neck

from

$84.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Unit is dual coated for enhanced corrosion protection
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Tested with OE fuel cap to prevent evaporative emission and check engine light failure
See More

GM Genuine Parts – Fuel Injection Throttle Control Actuator Module (Part No.12588923)

Fuel Injection Throttle Control Actuator Module

from

$309.99
GM Genuine Parts Fuel Injection Throttle Control Actuator Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules are electrically operated motor assemblies that control throttle plates. They receive an electrical signal from the engine control module and open throttle plates based on input from the accelerator pedal module. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – DEF Fluid Temp And Level Control Module (Part No.904-371)

DEF Fluid Temp And Level Control Module

from

$86.99
This diesel exhaust fluid (DEF) temperature sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this diesel exhaust fluid (DEF) temperature sensor is designed to match the fit and function of the original sensor on specified vehicles
  • Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
  • Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Air Charge Temperature Sensor Connector (Part No.PT187)

Air Charge Temperature Sensor Connector

from

$40.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
  • Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
  • Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
  • High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
  • Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
See More

DENSO – Oxygen Sensor: 4 Wire, 16.54" Long, Heated, Exact Fit (Part No.234-4651)

Oxygen Sensor: 4 Wire, 16.54" Long, Heated, Exact Fit

from

$59.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Upgrade your 2011 GMC Sierra 2500 HD with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2011 GMC Sierra 2500 HD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Sierra 2500 HD functioning at its best. At Advance Auto Parts, we offer a wide selection of 209 Fuel and Emissions Systems for the 2011 GMC Sierra 2500 HD, designed to meet your needs without breaking the bank. From Air Flow Sensor replacements to Oxygen Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2011 GMC Sierra 2500 HD at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $3.99 to $998.80, with an average price of $116.04. Our 209 Fuel and Emissions Systems in stock come from 17 trusted brands, so you’re sure to find the right part for your 2011 GMC Sierra 2500 HD without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 GMC Sierra 2500 HD, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like DENSO, FELPRO, Carquest Premium, and more. DENSO Fuel and Emissions Systems start at just $62.99 and boast an impressive 5 stars average rating from customers. FELPRO and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $4.79, and at an average 5 stars rating. With 8,512 customer reviews and counting, our 2011 GMC Sierra 2500 HD Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 GMC Sierra 2500 HD is always ready to roll. We’re committed to providing you with everything you need to keep your Sierra 2500 HD in top shape, all in one place. Start shopping confidently below for your 2011 GMC Sierra 2500 HD!

Best-Selling Air Flow Sensors for 2011 GMC Sierra 2500 HDs

Enhance the driving experience in your GMC with 10 quality Air Flow Sensor components, starting at $12.99.

NTK – Manifold Absolute Pressure Sensor (Part No.MA0205)

Manifold Absolute Pressure Sensor

from

$49.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
  • The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
See More

Carquest – Air Charge Temperature Sensor Connector (Part No.PT187)

Air Charge Temperature Sensor Connector

from

$40.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
  • Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
  • Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
  • High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
  • Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
See More

Delphi – Manifold Absolute Pressure Sensor (Part No.PS10247)

Manifold Absolute Pressure Sensor

from

$61.99
Delphi MAP sensors use the latest OE technology; Internally protected against moisture intrusion and vibration; Manufactured to meet or exceed OE requirements for 100,000 miles.

Product Features:
  • Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
  • Internally protected against moisture intrusion and vibration
  • Long lasting and durable
  • Designed and engineered with Delphi expertise
See More

ACDelco – Ambient Air Temperature Sensor (Part No.15-51150)

Ambient Air Temperature Sensor

from

$18.99
ACDelco GM Original Equipment Ambient Air Temperature Sensors are used with automatic climate control systems. The sensors provide the HVAC system controller with outside air temperature, allowing the controller to modify the climate-control strategy. The sensors may also provide the signal for the outside temperature in the driver information display. This original equipment ambient air temperature sensor is a GM-recommended replacement for your vehicle’s original components and has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Repairs the outside temperature display function caused by failed ambient temp sensor
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1069)

Ambient Air Temperature Sensor

from

$12.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Air Pressure Sensor (Part No.12711681)

Air Pressure Sensor

from

$79.99
ACDelco GM Original Equipment Multi Purpose Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

DENSO – Oxygen Sensor (Part No.C5010690345ND)

Oxygen Sensor

from

$79.55
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECA1298)

Manifold Absolute Pressure Sensor (MAP)

from

$61.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1277)

Air Charge Temperature Sensor

from

$38.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1552)

Ambient Air Temperature Sensor

from

$12.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Most Popular 2011 GMC Sierra 2500 HD Oxygen Sensors

Customize your GMC with 17 Oxygen Sensors products like Oxygen Sensors and Oxygen Sensor Connectors, all priced under $147.99.

NTK – Switching Oxygen Sensor: 4 Wire, 15" Long, Heated, Direct Fit (Part No.21066)

Switching Oxygen Sensor: 4 Wire, 15" Long, Heated, Direct Fit

from

$79.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

DENSO – Oxygen Sensor: 4 Wire, 15.75" Long, Heated, Exact Fit (Part No.234-4668)

Oxygen Sensor: 4 Wire, 15.75" Long, Heated, Exact Fit

from

$62.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

DENSO – Oxygen Sensor: Downstream, 4 Wire, 14.80" Long, Heated, Exact Fit (Part No.234-4256)

Oxygen Sensor: Downstream, 4 Wire, 14.80" Long, Heated, Exact Fit

from

$99.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4212)

Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit

from

$69.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Bosch – Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (Part No.15741)

Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal

from

$61.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

GM Genuine Parts – Oxygen Sensor: 4 Wires, 330 mm Long, Heated, Exact Fit (Part No.213-4229)

Oxygen Sensor: 4 Wires, 330 mm Long, Heated, Exact Fit

from

$60.99
GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Detects oxygen content in the exhaust gases to help optimize emissions
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Bosch – Oxygen Sensor: 4 Wire, 16.93" Long, Heated, Exact Fit (Part No.15698)

Oxygen Sensor: 4 Wire, 16.93" Long, Heated, Exact Fit

from

$67.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

GM Genuine Parts – Oxygen Sensor: 4 Wires, 309.5 mm Long, Heated, Exact Fit (Part No.213-1161)

Oxygen Sensor: 4 Wires, 309.5 mm Long, Heated, Exact Fit

from

$147.99
GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Detects oxygen content in the exhaust gases to help optimize emissions
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Oxygen Sensor: 4 Wires, 323 mm Long, Heated, Exact Fit (Part No.213-4693)

Oxygen Sensor: 4 Wires, 323 mm Long, Heated, Exact Fit

from

$109.99
GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Detects oxygen content in the exhaust gases to help optimize emissions
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

DENSO – Oxygen Sensor: Upstream, 4 Wire, 14.76" Long, Heated, Exact Fit (Part No.234-4563)

Oxygen Sensor: Upstream, 4 Wire, 14.76" Long, Heated, Exact Fit

from

$78.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

DENSO – Oxygen Sensor (Part No.C5010690176ND)

Oxygen Sensor

from

$78.46
Oxygen Sensor

Bosch – Oxygen Sensor (Part No.C50101333650BOS)

Oxygen Sensor

from

$97.19
Oxygen Sensor

Bosch – Oxygen Sensor: 4 Wire, 19.88" Long, Heated, Exact Fit (Part No.15283)

Oxygen Sensor: 4 Wire, 19.88" Long, Heated, Exact Fit

from

$112.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

NTK – Switching Oxygen Sensor: 4 Wire, 21.75" Long, Heated, Direct Fit (Part No.21555)

Switching Oxygen Sensor: 4 Wire, 21.75" Long, Heated, Direct Fit

from

$79.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Carquest Premium – Oxygen Sensor Connector (Part No.PTA1517)

Oxygen Sensor Connector

from

$53.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ACDelco – GM Original Equipment Oxygen Sensor: Optimal Engine Performance and Fuel Economy (Part No.C5010352631ACD)

GM Original Equipment Oxygen Sensor: Optimal Engine Performance and Fuel Economy

from

$86.07
The ACDelco GM Original Equipment Oxygen (O2) Sensor is a GM-recommended replacement for your vehicle’s original component. The Oxygen (O2) Sensor is a special feedback sensor on your vehicle’s exhaust system. This sensor measures the proportion of oxygen in the exhaust gases. Using this measurement, the engine management computer can adjust the air/fuel ratio near the optimum value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. This original equipment oxygen sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. When you are looking for a match to GM Original Equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done.

Product Features:
  • Detect oxygen content in the exhaust gases to optimize emissions and fuel economy
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Oxygen Sensor Connector (Part No.PTA1685)

Oxygen Sensor Connector

from

$34.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Top Picks for 2011 GMC Sierra 2500 HD Gas Caps

Upgrade GMC Sierra 2500 HDs with top-quality Gas Caps parts, including 32 OEM and aftermarket selections for your 2011 model.

Carquest Premium – Diesel Fuel Cap: 10819D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819D)

Diesel Fuel Cap: 10819D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$15.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17511)

Keyed Alike Locking Fuel Cap

from

$19.99
None

Product Features:
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Keyed Alike Locking Fuel Cap

from

$11.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Locking Fuel Cap: 10518, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10518)

Locking Fuel Cap: 10518, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591D)

Keyed Alike Locking Fuel Cap

from

$16.79
None

Product Features:
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Fuel Cap: 10830, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830)

Fuel Cap: 10830, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$12.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack

from

$14.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap: 10841, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10841)

Fuel Cap: 10841, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$21.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10834)

Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$15.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Gas Cap: Twist On, Reduces Air Pollution, 1 Pack

from

$15.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10511, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10511)

Locking Fuel Cap: 10511, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$27.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10501)

Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819)

Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$16.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
  • “Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.
See More

Carquest Premium – Locking Fuel Cap (Part No.10591)

Locking Fuel Cap

from

$23.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10591D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10591D)

Locking Fuel Cap: 10591D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap (Part No.10511Y)

Locking Fuel Cap

from

$32.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$21.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap: 10848, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10848)

Fuel Cap: 10848, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$18.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10507)

Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$22.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Diesel Fuel Cap: 10830D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830D)

Diesel Fuel Cap: 10830D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$12.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10523, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10523)

Locking Fuel Cap: 10523, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$23.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Keyed Alike Locking Fuel Cap

from

$6.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17511Y)

Keyed Alike Locking Fuel Cap

from

$20.99
None

Product Features:
  • Manufactured from durable, long-life materials
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Locking Fuel Cap (Part No.10501D)

Locking Fuel Cap

from

$31.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Motorad – Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (Part No.MGC817T)

Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack

from

$23.99
Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.
See More

Carquest Premium – Flex Fuel Cap: 10841Y, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10841Y)

Flex Fuel Cap: 10841Y, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Motorad – Tethered Fuel Cap (Part No.MGC840T)

Tethered Fuel Cap

from

$30.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Motorad – Tethered Fuel Cap (Part No.MGC841T)

Tethered Fuel Cap

from

$30.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Keyed Alike Locking Fuel Cap

from

$10.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Locking Fuel Cap: 17501D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.17501D)

Locking Fuel Cap: 17501D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$22.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Motorad – Tethered Fuel Cap (Part No.MGC517T)

Tethered Fuel Cap

from

$20.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17518)

Keyed Alike Locking Fuel Cap

from

$18.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

In-Demand Fuel Injectors for 2011 GMC Sierra 2500 HDs

Select from 39 premium Fuel Injectors parts for your 2011 GMC Sierra 2500 HD, with prices ranging from $4.49 to $695.69.

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6222)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$75.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61469)

Fuel Injection Throttle Body Mounting Gasket

from

$13.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Delphi – Mass Air Flow Sensor (Part No.AF10060)

Mass Air Flow Sensor

from

$114.99
100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
  • Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
  • Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
  • All parts are calibrated and tested to match the OE part
  • Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
  • Delphi OE technology validated to match the vehicle applications
See More

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Fuel Injector O-Ring Kit

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)

Nylon Nut - 1/4 In. (No.14)

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

GM Genuine Parts – Mass Airflow Sensor (Part No.23256991)

Mass Airflow Sensor

from

$219.99
GM Genuine Parts Mass Air Flow (MAF) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are key parts of the engine management system, and are GM-recommended replacements for your vehicle’s original components. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This helps ensure the most efficient air/fuel mixture for the best fuel economy and power. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS053)

Fuel Injector Seal Kit

from

$6.79
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

ACDelco – Sequential Multi-Port Fuel Injector Assembly (Part No.217-3412)

Sequential Multi-Port Fuel Injector Assembly

from

$47.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – GM Original Equipment Fuel Injection Throttle Body Gasket (Part No.C7001291899ACD)

GM Original Equipment Fuel Injection Throttle Body Gasket

from

$55.74
The ACDelco GM Original Equipment Fuel Injection Throttle Body Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Fuel Injector (Part No.217-3440)

Fuel Injector

from

$535.99
ACDelco GM Original Equipment Fuel Injector Kits contain the necessary parts to service a fuel injector, and are GM-recommended replacements for your vehicle’s original components. The fuel injector atomizes the fuel with the air entering the engine cylinder to form a combustible mixture. These original equipment fuel injector kits have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Fuel Injector (Part No.C1000385184ACD)

Fuel Injector

from

$87.73
Fuel Injector

Carquest Premium – Remanufactured Fuel Injector (Part No.A211-2183)

Remanufactured Fuel Injector

from

$54.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Felpro – Fuel Injector O-Ring Kit (Part No.ES 73217)

Fuel Injector O-Ring Kit

from

$25.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)

Fuel Pressure Relief Valve Cap

from

$6.29
GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Delphi – Mass Air Flow Sensor (Part No.AF10061)

Mass Air Flow Sensor

from

$125.99
100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
  • Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
  • Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
  • All parts are calibrated and tested to match the OE part
  • Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
  • Delphi OE technology validated to match the vehicle applications
See More

GM Genuine Parts – Fuel Injector Retainer Kit with Clip (Part No.12570620)

Fuel Injector Retainer Kit with Clip

from

$13.79
GM Genuine Parts Fuel Injector and Insulator Retainer Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Mass Air Flow Sensor (Part No.23259883)

Mass Air Flow Sensor

from

$289.99
GM Genuine Parts Mass Air Flow (MAF) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are key parts of the engine management system, and are GM-recommended replacements for your vehicle’s original components. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This helps ensure the most efficient air/fuel mixture for the best fuel economy and power. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6358)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$90.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-50074)

Remanufactured Mass Air Flow Sensor

from

$86.99
CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:
  • 100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
  • On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
  • All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
  • Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
  • Components are rated to handle demanding temperature variations for optimum reliability in every environment.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

GM Genuine Parts – Multi-Port Fuel Injector O-Ring Kit with 16 O-Rings (Part No.217-3092)

Multi-Port Fuel Injector O-Ring Kit with 16 O-Rings

from

$41.99
GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps provide a seal to prevent fuel leaks
  • Helps seal combustion chamber from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Felpro – Fuel Injector O-Ring Kit (Part No.ES 73201)

Fuel Injector O-Ring Kit

from

$32.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Dorman – Indirect Fuel Injector (Part No.904-436)

Indirect Fuel Injector

from

$362.99
This hydrocarbon injector (HCI), also called an aftertreatment doser, is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this hydrocarbon injector (HCI) matches the fit and function of the factory part on specified years, make and models.
  • Ideal solution – this hydrocarbon injector is a reliable replacement for an original part that has failed due to wear, corrosion or fouling.
  • Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

ACDelco – Indirect Fuel Injector Assembly (Part No.12661071)

Indirect Fuel Injector Assembly

from

$292.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Bosch – Pressure regulator (Part No.0281006019)

Pressure regulator

from

$199.99
Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.

Product Features:
  • Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.
  • End of line testing using the exact OE test specifications.
  • Guaranteed to provide OE performance and meet all emission specifications.
  • Continuous improvement, remanufactured with the latest upgrades to components and specifications.
See More

GM Genuine Parts – Fuel Injector O-Ring Kit with Washers (Part No.217-3438)

Fuel Injector O-Ring Kit with Washers

from

$28.49
GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps provide a seal to prevent fuel leaks
  • Helps seal combustion chamber from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – GM Original Equipment Fuel Injector Assembly (Part No.C1000510143ACD)

GM Original Equipment Fuel Injector Assembly

from

$695.69
The ACDelco GM Original Equipment Fuel Injector is a GM-recommended replacement for your vehicle’s original component. The Fuel Injector is an electro-magnetic valve that meters fuel into the engine’s intake manifold or cylinders for combustion. The engine management computer operates the injector by applying an electric current to the injector solenoid winding – this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. This original equipment fuel injector has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Atomize fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Bosch – Diesel Fuel Injector: New (Part No.0445117010)

Diesel Fuel Injector: New

from

$629.99
Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks. End of line testing using the exact OE test specifications. Guaranteed to provide OE performance and meet all emission specifications. Continuous improvement, manufactured with the latest upgrades to components and specifications. Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, and Asian vehicles.

Product Features:
  • 100% of injectors are end of line tested using the exact OE test specifications and equipment
  • Manufactured with the latest OE updates, so they can often be superior to the parts they replace
  • Manufactured using all OE tools and processes
  • Guaranteed to provide OE performance
  • Nationwide warranty coverage for one year, unlimited miles
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.AD25053)

Remanufactured Fuel Injector

from

$531.99
CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:
  • Each unit is 100% tested to OE specifications.
  • Includes 100% replacement of nozzle to ensure accurate and precise injection under all operating parameters.
  • Includes all new premium quality o-rings and seals.
  • Includes copper combustion gasket.
  • Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation.
See More

Bosch – Diesel Fuel Injector: New (Part No.0445117008)

Diesel Fuel Injector: New

from

$503.99
Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks. End of line testing using the exact OE test specifications. Guaranteed to provide OE performance and meet all emission specifications. Continuous improvement, manufactured with the latest upgrades to components and specifications. Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, and Asian vehicles.

Product Features:
  • 100% of injectors are end of line tested using the exact OE test specifications and equipment
  • Manufactured with the latest OE updates, so they can often be superior to the parts they replace
  • Manufactured using all OE tools and processes
  • Guaranteed to provide OE performance
See More

ACDelco – Fuel Injector (Part No.19210900)

Fuel Injector

from

$471.99
ACDelco GM Original Equipment Fuel Injector Kits contain the necessary parts to service a fuel injector, and are GM-recommended replacements for your vehicle’s original components. The fuel injector atomizes the fuel with the air entering the engine cylinder to form a combustible mixture. These original equipment fuel injector kits have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

aFe POWER – Sprint Booster (Part No.77-14003)

Sprint Booster

from

$339.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:
  • Reduces Throttle Response Time
  • Improves Acceleration
  • Easy To Install
  • Does Not Affect The Vehicles Electronic System
See More

Bosch – Diesel Fuel Injector: Remanufactured (Part No.0986435410)

Diesel Fuel Injector: Remanufactured

from

$325.99
Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks. End of line testing using the exact OE test specifications. Guaranteed to provide OE performance and meet all emission specifications. Continuous improvement, manufactured with the latest upgrades to components and specifications. Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, and Asian vehicles.

Product Features:
  • 100% of injectors are end of line tested using the exact OE test specifications and equipment
  • Manufactured with the latest OE updates, so they can often be superior to the parts they replace
  • Manufactured using all OE tools and processes
  • Guaranteed to provide OE performance
See More

Dorman – Remanufactured Diesel Fuel Injector (Part No.502-518)

Remanufactured Diesel Fuel Injector

from

$319.99
This diesel fuel injector is a direct replacement for the original equipment injector and has been remanufactured to stringent industry standards for optimum performance and efficiency.

Product Features:
  • Direct replacement – this diesel fuel injector matches the fit and functionality of the original equipment injector
  • Durable construction – this injector is remanufactured from quality materials for durability
  • Cost-effective dealer alternative – offers original manufacturer quality at lower cost than a dealer replacement
  • Quality tested – this diesel fuel injector has been tested for quality and fit for this vehicle application
See More

Delphi – Air Mass Sensor (Part No.B3150658145DEL)

Air Mass Sensor

from

$215.20
All Delphi Air Mass Sensors feature a patented dimpled flow management feature that provides better control of air separation for more consistent air flow across the sensing elements and enabling outstanding performance in application-specific ducting.

Product Features:
  • Platinum-coated ceramic heated sensing element design is smaller and less fragile than competitive products
  • Heated sensing elements are very robust to damage from dust impingement
  • Heated sensing elements offer proven durability with more that 130 million in the field over the past 16 years
  • Patented temperature compensation algorithm offers robustness to changes in ambient air temperature
  • Patented dimple design eliminates the need for a flow straightener in most applications
  • Probe design offers low restriction air measurement driving increased horsepower
  • Interchangeability is enabled by common mounting footprint
See More

Delphi – Delphi Air Mass Sensor (Part No.B3150721593DEL)

Delphi Air Mass Sensor

from

$165.75
All Delphi Air Mass Sensors feature a patented dimpled flow management feature that provides better control of air separation for more consistent air flow across the sensing elements and enabling outstanding performance in application-specific ducting.

Product Features:
  • Platinum-coated ceramic heated sensing element design is smaller and less fragile than competitive products
  • Heated sensing elements are very robust to damage from dust impingement
  • Heated sensing elements offer proven durability with more that 130 million in the field over the past 16 years
  • Patented temperature compensation algorithm offers robustness to changes in ambient air temperature
  • Patented dimple design eliminates the need for a flow straightener in most applications
  • Probe design offers low restriction air measurement driving increased horsepower
  • Interchangeability is enabled by common mounting footprint
See More

Dorman – Fuel Injector O-Ring Kit (Part No.904-135)

Fuel Injector O-Ring Kit

from

$30.49
The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:
  • Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles.
  • Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AC20722)

Fuel Injector Seal Kit

from

$26.99
Product Features:
  • Premium OE quality materials
  • Includes injector body o-ring
  • Includes return port o-ring
  • Includes copper combustion seal
See More

Victor Reinz – Fuel Injection Throttle Body Mounting Gasket (Part No.71-15924-00)

Fuel Injection Throttle Body Mounting Gasket

from

$18.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)

Fuel Injector O-Ring Kit

from

$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Most Sold 2011 GMC Sierra 2500 HD Fuel Pumps

Explore our best-selling GMC parts for the 2011 Sierra 2500 HD among 18 OEM and aftermarket options starting from $15.99.

Carquest Premium – Fuel/Water Separator Spin-on with Open Port (Part No.86960XE)

Fuel/Water Separator Spin-on with Open Port

from

$75.99
CARQUEST HD fuel filters protect sensitive fuel system components like injection pumps and injectors from damaging contaminants. They are designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.

Product Features:
  • Environmental Spin-on fuel filter
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seals (Part No.FG2020)

Fuel Pump Module Assembly: With Float Arm, Seals

from

$686.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Delphi – Electric Fuel Lift Pump: 12V, With 2 Female Blade Terminals (Part No.HFP955)

Electric Fuel Lift Pump: 12V, With 2 Female Blade Terminals

from

$81.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • All pumps are functionally tested for correct operation which improves pump reliability
  • Exact fit original equipment replacements means easy installation
  • Consistent pressure at all operating temperatures results in quick start-ups.
  • Pump is designed for diesel engines and applications
  • Always check fuel filter when replacing the fuel pump
See More

GM Genuine Parts – Fuel Pump and Level Sensor Module (Part No.MU1960)

Fuel Pump and Level Sensor Module

from

$399.99
GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps provide a reliable fuel supply to your vehicle’s engine
  • Electrical connections are designed to help eliminate high resistance due to vehicle vibration
  • Designed to optimize pump life and reduce fuel pump noise
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Delphi – Fuel Transfer Unit (Part No.FT4038)

Fuel Transfer Unit

from

$561.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Meet or exceeds OE requirements
  • Transfers fuel within the tank
  • Does not include primary fuel pump
See More

ACDelco – Fuel Pump Assembly (Part No.E3001423555ACD)

Fuel Pump Assembly

from

$482.63
Fuel Pump Assembly

GM Genuine Parts – Fuel Pump and Level Sensor Module with Seals (Part No.MU1977)

Fuel Pump and Level Sensor Module with Seals

from

$273.99
GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). Product contains Perfluorooctanoic acid (PFOA): Not for import into European Union (EU)

Product Features:
  • Helps provide a reliable fuel supply to your vehicle’s engine
  • Electrical connections are designed to help eliminate high resistance due to vehicle vibration
  • Designed to optimize pump life and reduce fuel pump noise
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Bosch – High Pressure Pump, Remanufactured (Part No.D20001333969BOS)

High Pressure Pump, Remanufactured

from

$998.80
Bosch Remanufactured High Pressure Pumps are cost-effective and meet the same high standards and safeguards as brand new High Pressure Pumps.

Product Features:
  • Remanufactured using new OE components and reconditioned OE components
  • Tested using the OE test specifications
  • Guaranteed to meet emission requirements
See More

Bosch – Common Rail Pump (Part No.0986437421)

Common Rail Pump

from

$764.99
Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.End of line testing using the exact OE test specifications.Guaranteed to provide OE performance and meet all emission specifications.Continuous improvement, manufactured with the latest upgrades to components and specifications.

Product Features:
  • 100% of pumps are end of line tested using the exact OE test specifications and equipment
  • Remanufactured pumps include all OE updates, so they can often be superior to the OE pumps that they replace
  • Manufactured using all OE tools and processes
  • Remanufactured Pumps receive new OE parts for all wearable or critical components
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seals (Part No.FG1746)

Fuel Pump Module Assembly: With Float Arm, Seals

from

$588.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Delphi – Fuel Transfer Unit (Part No.FT4037)

Fuel Transfer Unit

from

$547.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Meet or exceeds OE requirements
  • Transfers fuel within the tank
  • Does not include primary fuel pump
See More

ACDelco – Fuel Pump Assembly (Part No.E3001423556ACD)

Fuel Pump Assembly

from

$493.80
Fuel Pump Assembly

Worldpac – FUEL PUMP CONTROL MO (Part No.E3006582171ACD)

FUEL PUMP CONTROL MO

from

$222.38
FUEL PUMP CONTROL MO

Dorman – Fuel Sending Unit Pigtail (Part No.645-221)

Fuel Sending Unit Pigtail

from

$52.99
This fuel sender connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel sender connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Air Suspension Compressor Motor Connector (Part No.PTC1308)

Air Suspension Compressor Motor Connector

from

$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

Fuel Cap Tester Adapter

from

$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Fuel Cap Tester Adapter

from

$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Top-Rated Fuel and Emissions Systems Brands For Your 2011 GMC Sierra 2500 HD

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2011 GMC Sierra 2500 HDs. Below you’ll find some of our best rated Fuel and Emissions Systems from DENSO, FELPRO, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2011 Sierra 2500 HD start at just $4.79 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular DENSO 2011 GMC Sierra 2500 HD Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2011 GMC Sierra 2500 HD, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. DENSO ticks all of those boxes. We offer a wide selection of DENSO Fuel and Emissions Systems, specifically designed for the 2011 GMC Sierra 2500 HD. With over 6 DENSO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $62.99, with an average price of just $78.33. Plus, with over 484 customer reviews and an average rating of 5 stars, you can trust that our DENSO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Oxygen Sensor
from
$78.46
This product is not rated

Oxygen Sensor

“”

Oxygen Sensor
from
$79.55
This product is not rated

Oxygen Sensor

“”

Oxygen Sensor: Upstream, 4 Wire, 14.76" Long, Heated, Exact Fit
from
$78.99
This product is not rated

Oxygen Sensor: Upstream, 4 Wire, 14.76" Long, Heated, Exact Fit

“”

Popular FELPRO 2011 GMC Sierra 2500 HD Fuel and Emissions Systems

FELPRO auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2011 GMC Sierra 2500 HD owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 2011 Sierra 2500 HD, Advance Auto Parts carries a full inventory of 9 FELPRO Fuel and Emissions Systems. Plus you will be keeping your GMC in peak condition while saving money because prices on these FELPRO Fuel and Emissions Systems range from $5.49 to $32.49, plus, with more than 112 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

EGR/EXHAUST AIR SUPPLY GASKET
from
$9.79
This product is not rated

EGR/EXHAUST AIR SUPPLY GASKET

“”

Fuel Injector O-Ring Kit
from
$25.49
This product is not rated

Fuel Injector O-Ring Kit

“”

Fuel Injector O-Ring Kit
from
$32.49
This product is not rated

Fuel Injector O-Ring Kit

“”

FAQs for 2011 GMC Sierra 2500 HD Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2011 GMC Sierra 2500 HDs?

Out of 209 Fuel and Emissions Systems that fit 2011 GMC Sierra 2500 HDs, the following parts are the top sellers:

What’s the price range for 2011 GMC Sierra 2500 HD Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2011 GMC Sierra 2500 HD start at $3.99 and go up to $998.80 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2011 GMC Sierra 2500 HD?

The average price for Fuel and Emissions Systems for the 2011 GMC Sierra 2500 HD is $116.04. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other GMC Sierra 2500 HD model years?

Yes, we currently carry Fuel and Emissions Systems for 24 model years of GMC Sierra 2500 HDs between 2001 and 2025. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Fuel and Emissions Systems for my 2011 GMC Sierra 2500 HD?

The cheapest 2011 GMC Sierra 2500 HD Fuel and Emissions Systems we carry in stock are:

What are the top-rated Fuel and Emissions Systems that fit the 2011 GMC Sierra 2500 HD?

Out of 8,512 reviews by customers, our 2011 GMC Sierra 2500 HD Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2011 GMC Sierra 2500 HD and their top-rated products:

What types of Fuel and Emissions Systems do you sell for my 2011 GMC Sierra 2500 HD?

Can I get help with 2011 GMC Sierra 2500 HD Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Fuel and Emissions Systems and more.

What is your return policy for GMC Sierra 2500 HD Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new GMC Sierra 2500 HD Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.