2011 Dodge Challenger Belts and Hoses

Essential Belts and Hoses for 2011 Dodge Challengers

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Gates – Heater Hose (Part No.R3030661411GAT)

Heater Hose

from

$108.89
Heater Hose

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length (Part No.80404)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length

from

$18.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Driveworks – Automotive V-Belt (Part No.47515)

Automotive V-Belt

from

$5.09
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Dayco – Bottom Cog V-Belt; 54 Inch Long, Exact Fit Premium Quality (Part No.17540)

Bottom Cog V-Belt; 54 Inch Long, Exact Fit Premium Quality

from

$27.49
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  •  Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  •  Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25476)

Vulco-Flex½ II Flexible Coolant Hose

from

$29.49
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Radiator Hose (Part No.G2000569857DAY)

Radiator Hose

from

$17.96
Radiator Hose

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.44" Diameter (Part No.E72284)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.44" Diameter

from

$22.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18.5" Long, 1.44" Diameter (Part No.E73048)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18.5" Long, 1.44" Diameter

from

$36.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.88" Long, 1" Diameter (Part No.A70637)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.88" Long, 1" Diameter

from

$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length (Part No.80411)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length

from

$7.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900125A)

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter

from

$29.99
Litens Automotive is the original equipment (O.E.) supplier for this application. This genuine Litens replacement pulley is also manufactured by Litens, the world’s largest supplier of original equipment power transmission products. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Heavy duty thermoplastic pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • Installation instructions included
See More

Dorman – Idler/Tensioner Pulley: Specific Fit, Plastic, 69 mm Diameter (Part No.419-649)

Idler/Tensioner Pulley: Specific Fit, Plastic, 69 mm Diameter

from

$47.99
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:
  • Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles.
  • Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
  • Application specific – reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality – backed by team of engineers and quality specialists in the United States
See More

Dorman – Automatic Belt Tensioner (Part No.419-040)

Automatic Belt Tensioner

from

$172.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:
  • Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles.
  • Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dayco – Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89377)

Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts

from

$49.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
  • This tensioner is another Dayco product proudly made in the USA
See More

ACDelco – Acc. Belt Tension Pu (Part No.G6011626120ACD)

Acc. Belt Tension Pu

from

$58.17
Acc. Belt Tension Pu

Gates – Acc. Belt Idler Pull (Part No.G6020661368GAT)

Acc. Belt Idler Pull

from

$74.14
Acc. Belt Idler Pull

Dorman – FUEL LINE (Part No.904-027)

FUEL LINE

from

$52.99
This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions.

Product Features:
  • Trustworthy replacement – this fuel line safely replaces the original fuel line to fix fuel leaks.
  • Durable design – withstands tough underhood and undercar conditions
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
  • Comprehensive solutions – this fuel line is part of a diverse collection of fuel line repair solutions
See More

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25252)

Vulco-Flex« II Flexible Coolant Hose

from

$21.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.28" Diameter (Part No.B70939)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.28" Diameter

from

$27.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dorman – Engine Heater Hose Assembly (Part No.626-548)

Engine Heater Hose Assembly

from

$62.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Engine Heater Hose Assembly (Part No.626-327)

Engine Heater Hose Assembly

from

$29.49
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability..

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Poly Rib Belt Serpentine Belt; 83.5 Long, 6 Rib Count (Part No.835K6)

Poly Rib Belt Serpentine Belt; 83.5 Long, 6 Rib Count

from

$28.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Driveworks – Poly Rib Belt Serpentine Belt; 66 Long, 6 Rib Count (Part No.660K6)

Poly Rib Belt Serpentine Belt; 66 Long, 6 Rib Count

from

$17.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth (Part No.89133)

Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth

from

$24.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today.
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)

Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth

from

$29.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – V-Belt Idler/Tensioner Pulley; Steel, 94mm Dia., 16.4mm Width, Grooves (Part No.89020)

V-Belt Idler/Tensioner Pulley; Steel, 94mm Dia., 16.4mm Width, Grooves

from

$24.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Upgrade your 2011 Dodge Challenger with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2011 Dodge Challenger, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Belts and Hoses are key to keeping your Challenger functioning at its best. At Advance Auto Parts, we offer a wide selection of 57 Belts and Hoses for the 2011 Dodge Challenger, designed to meet your needs without breaking the bank. From Belt Tensioner replacements to Heater Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2011 Dodge Challenger at great prices. Our Belts and Hoses inventory for this model ranges from just $7.79 to $260.73, with an average price of $50.84. Our 57 Belts and Hoses in stock come from 14 trusted brands, so you’re sure to find the right part for your 2011 Dodge Challenger without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Dodge Challenger, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Litens, Driveworks, and more. Dayco Belts and Hoses start at just $7.79 and boast an impressive 5 stars average rating from customers. Litens and Driveworks also bring quality to the table, with Belts and Hoses available starting at $21.99, and at an average 5 stars rating. With 2,283 customer reviews and counting, our 2011 Dodge Challenger Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Dodge Challenger is always ready to roll. We’re committed to providing you with everything you need to keep your Challenger in top shape, all in one place. Start shopping confidently below for your 2011 Dodge Challenger!

Best-Selling Belt Tensioners for 2011 Dodge Challengers

Enhance the driving experience in your Dodge with 8 quality Belt Tensioner components, starting at $49.99.

Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-006)

Automatic Belt Tensioner (Tensioner Only)

from

$75.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:
  • Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles.
  • Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89632)

Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts

from

$152.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
  • This tensioner is another Dayco product proudly made in the USA
See More

Dayco – Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89377)

Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts

from

$49.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
  • This tensioner is another Dayco product proudly made in the USA
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999600A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$68.99
Litens was the Original Equipment (O.E.) supplier of this Chrysler/Dodge/Jeep/Ram tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner is designed with a molded locator pins on the base to ensure precise installation location as well as a heavy-duty polymer pulley. To assist with belt installation and removal, the tensioner arm has an integrated lift feature. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use round spring technology and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999933A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$154.99
Litens is the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”* part for the aftermarket. This popular tensioner was designed for the V-6 Pentastar Chrysler engines, looks, fits, and performs as the original part being replaced. “O.E. Exact” – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part does not have the OE P/N on the part but it is identical in every way. Like the original design, this tensioner was designed with an “Active Pivot”. It has two springs, one for damping control that puts axial force on the damping bushing which enables the part to maintain continued constant damping throughout the useful life of the part and the other for torque output. The pulley for this part was also designed to the strictest roundness tolerances requiring a proprietary molding technique developed by Litens. The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. The internal damping design provides quiet, smooth, system performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit and performance.
  • Active Pivot
  • Pulley for this part was designed to the strictest roundness tolerances requiring a proprietary molding technology developed by the manufacturer.
  • The internal damping design provides quiet, smooth, system performance
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
  • Installation instructions included
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
See More

Dayco – Acc. Belt Tensioner (Part No.G6001216475DAY)

Acc. Belt Tensioner

from

$78.95
Acc. Belt Tensioner

Worldpac – ACC. BELT TENSIONER (Part No.G6001606196GAT)

ACC. BELT TENSIONER

from

$260.73
ACC. BELT TENSIONER

Dorman – Automatic Belt Tensioner (Part No.419-040)

Automatic Belt Tensioner

from

$172.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:
  • Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles.
  • Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Most Popular 2011 Dodge Challenger Heater Hoses

Customize your Dodge with 5 Heater Hoses products like Heater Hoses and HVAC Heater Pipe Lines, all priced under $55.99.

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 25 Inch Length (Part No.80414)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 25 Inch Length

from

$12.99
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dorman – Molded Heater Hose: Rubber, OE Fix, Upgraded Material (Part No.626-319)

Molded Heater Hose: Rubber, OE Fix, Upgraded Material

from

$51.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Upgraded material – this replacement engine heater hose assembly features aluminum T-connectors for added durability.
  • Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models.
  • Complete replacement – hoses come with necessary clamps for easy installation
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Dorman – Molded Heater Hose: Steel/Rubber (Part No.626-320)

Molded Heater Hose: Steel/Rubber

from

$55.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Upgraded material – this replacement engine heater hose assembly features aluminum T-connectors for added durability.
  • Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models.
  • Complete replacement – hoses come with necessary clamps for easy installation
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Dorman – Engine Heater Hose Assembly (Part No.626-328)

Engine Heater Hose Assembly

from

$31.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability..

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Engine Heater Hose Assembly (Part No.626-327)

Engine Heater Hose Assembly

from

$29.49
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability..

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications.
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Top Picks for 2011 Dodge Challenger Serpentine and V Belts

Upgrade Dodge Challengers with top-quality Serpentine and V Belts parts, including 17 OEM and aftermarket selections for your 2011 model.

Driveworks – Poly Rib Belt Serpentine Belt; 82.09 Long, 6 Rib Count (Part No.820K6)

Poly Rib Belt Serpentine Belt; 82.09 Long, 6 Rib Count

from

$26.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 82.68 Long, 6 Rib Count (Part No.5060827)

Poly Rib Belt Serpentine Belt; 82.68 Long, 6 Rib Count

from

$49.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Driveworks – Poly Rib Belt Serpentine Belt; 82.68 Long, 6 Rib Count (Part No.827K6)

Poly Rib Belt Serpentine Belt; 82.68 Long, 6 Rib Count

from

$47.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)

Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth

from

$29.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Driveworks – Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (Part No.825K6)

Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count

from

$31.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (Part No.5060825)

Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count

from

$49.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 82.09 Long, 6 Rib Count (Part No.5060820)

Poly Rib Belt Serpentine Belt; 82.09 Long, 6 Rib Count

from

$51.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth (Part No.89133)

Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth

from

$24.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today.
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Dayco – Poly Rib Belt Serpentine Belt; 66.34 Long, 6 Rib Count (Part No.5060663)

Poly Rib Belt Serpentine Belt; 66.34 Long, 6 Rib Count

from

$29.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads & temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives.
  • Engineered to help address noise issues caused by the belt drive
  • Engineered to help address noise issues caused by the belt driveá
  • Capable of handling more extreme temperatures and workloads
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W1000335757MBL)

Multi-Rib (Serpentine) Belt

from

$43.83
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Dayco – Poly Rib Serpentine Belt (Part No.W1000939543DAY)

Poly Rib Serpentine Belt

from

$51.84
Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:
  • Constructed with aramid-reinforced EPDM compounds
  • Engineered to conform to high mileage, worn or misaligned drives
  • Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)
See More

Bando – Drive Belt (Part No.W1000142803BAN)

Drive Belt

from

$41.11
Drive Belt

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100036484CON)

Multi Rib (Serpentine) Belt

from

$59.55
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Bando – Drive Belt (Part No.W10002440708BAN)

Drive Belt

from

$46.02
Drive Belt

Carquest Standard – Serpentine Belt: 82.7" Long, 6 Rib Count (Part No.827K6)

Serpentine Belt: 82.7" Long, 6 Rib Count

from

$32.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OE fit, form, and function
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060663)

Micro-V« Serpentine Drive Belt

from

$30.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

In-Demand Engine Cooling Hoses for 2011 Dodge Challengers

Select from 8 premium Engine Cooling Hoses parts for your 2011 Dodge Challenger, with prices ranging from $15.99 to $135.49.

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.44" Diameter (Part No.C72282)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.44" Diameter

from

$16.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.75" Diameter (Part No.B71598)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.75" Diameter

from

$19.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Molded Radiator and Bypass Hose (Part No.G2000111269DAY)

Molded Radiator and Bypass Hose

from

$35.50
Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.

Product Features:
  • Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C)
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
  • Meets SAE J20R4, Class D-1 requirements for improved service hose
  • Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
  • Limited Three Year Warranty
See More

Dayco – Radiator Hose (Part No.G2000570066DAY)

Radiator Hose

from

$25.89
Radiator Hose

Gates – Heater Hose (Part No.R3030777844GAT)

Heater Hose

from

$135.49
Heater Hose

Gates – Heater Hose (Part No.R3030661411GAT)

Heater Hose

from

$108.89
Heater Hose

Suncore – Shock Kit (Part No.2-12S253600-001)

Shock Kit

from

$39.99
Shock Kit

Gates – Premium Molded Coolant Hose (Part No.22940)

Premium Molded Coolant Hose

from

$15.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Most Sold 2011 Dodge Challenger Fuel Hoses

Explore our best-selling Dodge parts for the 2011 Challenger among 1 OEM and aftermarket options starting from $52.99.

Dorman – FUEL LINE (Part No.904-027)

FUEL LINE

from

$52.99
This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions.

Product Features:
  • Trustworthy replacement – this fuel line safely replaces the original fuel line to fix fuel leaks.
  • Durable design – withstands tough underhood and undercar conditions
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
  • Comprehensive solutions – this fuel line is part of a diverse collection of fuel line repair solutions
See More

Top-Rated Belts and Hoses Brands For Your 2011 Dodge Challenger

Shop for the best-rated brands offering Belts and Hoses and other products for your 2011 Dodge Challengers. Below you’ll find some of our best rated Belts and Hoses from Dayco, Litens, and Driveworks, and more. Belts and Hoses from these brands that fit a 2011 Challenger start at just $7.79 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2011 Dodge Challenger Belts and Hoses

When it comes to maintaining or upgrading your 2011 Dodge Challenger, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2011 Dodge Challenger. With over 21 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.79, with an average price of just $41.40. Plus, with over 566 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Acc. Belt Tensioner
from
$78.95
This product is not rated

Acc. Belt Tensioner

“”

Popular Litens 2011 Dodge Challenger Belts and Hoses

Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 2011 Dodge Challenger owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 2011 Challenger, Advance Auto Parts carries a full inventory of 5 Litens Belts and Hoses. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Litens Belts and Hoses range from $21.99 to $154.99, plus, with more than 14 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter
from
$21.99
This product is not rated

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter

“”

Accessory Drive Belt Tensioner - Original Equipment Quality
from
$154.99
This product is not rated

Accessory Drive Belt Tensioner – Original Equipment Quality

“”

Accessory Drive Belt Tensioner - Original Equipment Quality
from
$68.99
This product is not rated

Accessory Drive Belt Tensioner – Original Equipment Quality

“”

FAQs for 2011 Dodge Challenger Belts and Hoses

Which Belts and Hoses are best-sellers for 2011 Dodge Challengers?

Out of 57 Belts and Hoses that fit 2011 Dodge Challengers, the following parts are the top sellers:

What’s the price range for 2011 Dodge Challenger Belts and Hoses?

Belts and Hose prices for the 2011 Dodge Challenger start at $7.79 and go up to $260.73 for the most premium parts.

What’s the average price of a Belts and Hose for a 2011 Dodge Challenger?

The average price for Belts and Hoses for the 2011 Dodge Challenger is $50.84. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Dodge Challenger model years?

Yes, we currently carry Belts and Hoses for 26 model years of Dodge Challengers between 1970 and 2023. Belts and Hoses are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Belts and Hoses for my 2011 Dodge Challenger?

What are the top-rated Belts and Hoses that fit the 2011 Dodge Challenger?

Out of 2,283 reviews by customers, our 2011 Dodge Challenger Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2011 Dodge Challenger and their top-rated products:

What types of Belts and Hoses do you sell for my 2011 Dodge Challenger?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2011 Dodge Challenger:

Can I get help with 2011 Dodge Challenger Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Belts and Hoses and more.

What is your return policy for Dodge Challenger Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Dodge Challenger Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.