2011 Chrysler 200 Engine Parts

Below you will find various in-demand Chrysler Engine Parts, components and accessories for your 2011 200. Advance Auto Parts has popular 200 parts like Engine Timing Parts, Engine Mounts, Valve Cover and Cylinder Heads and more. You’ll also find aftermarket and OEM Engine Parts for other 200 model years including 2012, 2013, 2014, 2015, 2016, 2017 and more. Select a category of 2011 Chrysler 200 Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2011 Chrysler 200 Engine Parts Categories

Valve Covers

Engine Valve Lifters

Engine Variable Timing Solenoids

Engine Oil Temperature Sensors

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Cylinder Head Bolt Sets

Plenum Gasket Sets

Crankshaft Position Sensors

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Timing Cam Gears

Engine Mounts

Oil Cooler Gasket Sets

Timing Belt Jobs

Oil Pans

Valve Cover Grommets

Engine Oil Cooler Accessories

Cylinder Head Gaskets

Crankshaft Seals

Oil Caps

Camshaft Position Sensor Connectors

Timing Chain Tensioners

Engine Oil Pump Pickup Tube and Screens

O-Rings

Engine Variable Timing Adjusters

Timing Idler Sprockets

Engine Variable Timing Oil Control Valves

Engine Valve Stem Seals

Standard Rod Bearing Sets

Standard Piston Rings

Standard Individual Rod Bearings

Engine Oil Cooler Adapter Seals

Timing Crank Gears

Engine Variable Timing Solenoid Connectors

Camshaft Followers

Engine Oil Pump Chain Tensioners

Balance Shaft Belt Tensioners

Engine Oil Pump Chain Tensioner Rails

Oil Pump Sprockets

Engine Oil Pump Chain Rails

Fuel Tank Sending Unit Gaskets

Remanufactured Engines

Cylinder Heads

Engine Timing Sprocket Bolt

Engine Camshaft Position Sensor O-rings

Engine Oil Pump Flow Control Valves

Camshaft Lubes

Engine Oil Pump Primers

Engine Assembly Lube

Essential Engine Parts for 2011 Chrysler 200s

from

$29.99

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$97.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Timing cover gasket set contains the timing cover seal and timing cover gasket(s) where required.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$46.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. As a critical component of the engine┬┐s timing system, the crankshaft sprockets work in unison with the timing chain, tensioners, guides and other sprockets, to ensure precise timing. Cloyes engine timing crankshaft sprockets are precision,tooled with exact tooth geometry and a perfectly matched bore, off,set and timing index for superior fit, reliability, and long,term performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry,leading warranty and technical support.┬á

Product Features:

Features precision,tooled tooth form, bore, off,set and timing index for superior fit, reliability, and long,term performance in engine timing repairs
CAD designed and manufactured using premium materials and heat,treated for OE,level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application,specific kit or as a stand,alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$115.99

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Chrome plated top ring facings for enhanced performance under demanding conditions
Second rings seat instantly, properly control inter-ring pressure to improve cylinder sealing, provide efficient piston-to-cylinder heat transfer and aid in effective oil control
Oil rings are unequalled at controlling oil; design keeps tension uniform while assuring a positive seal
In the box: compression rings, rails and oil spacer

from

$17.99

An oil pump chain guide serves as a track or guide, for the oil pump chain, connecting the crankshaft and oil pump. Designed to meet or exceed OEM performance requirements, Timing Guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:

Extensively tested and measured for function, fitment, and durability to ensure optimal performance.
CAD designed and manufactured using premium materials.
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.
Refer to our online catalog for detailed application-specific information

from

$195.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$3034.99

Your remanufactured engine is tested in several specific ways after being assembled; Multiple Pressure tests. Each component is carefully checked after being cleaned to see if cracks or other defects exist in the casting. After being assembled, we pressure

Product Features:

Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your First !
Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.

from

$733.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$7.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$73.99

Along with the timing chain, tensioners, And guides, sprockets are an integral component within the timing system. Cloyes timing gears And sprockets are available as part of complete timing kits as well as for individual purchase And installation. Featuring helical tooth form for quiet operation, And precision-machined bore for true fit, Cloyes Timing Sprockets offer reliability And dependability for engine rebuilds And typical replacement jobs. Cloyes parts are CAD designed And manufactured using advanced materials. Each part is extensively tested for function And durability to ensure optimal performance. Cloyes recommends the chain tensioner(s), sprocket(s), And guide(s) also be replaced when the chain is replaced as these components play a vital role in supporting the chain And keeping it tight. Refer to our online catalog for detailed application-specific information.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$215.99

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$44.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$9.99

Sealed Power® parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$76.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$34.99

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function.
Meets or exceeds OE specifications

from

$55.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$69.99

Oil pump flow control valves often fail from varnish build-up, and the original manufacturer requires replacing the entire oil pump assembly. This Dorman OE FIX valve is a money-saving solution that allows you to replace only the failed valve.

Product Features:

Money-saving solution – this variable oil pump solenoid can be replaced on its own without having to replace the entire oil pump assembly
Durable construction – made of quality materials to ensure reliable performance and prevent future failures
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
Trustworthy quality – engineered and tested in the United States

from

$17.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$58.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Cylinder head gaskets are sold individually and may require new head bolts based on application.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$11.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$74.99

A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

Precision engineered for optimum fit and function
Manufactured from high quality materials for consistent durable wear
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$32.99

Variable Valve Timing (VVT) Sprocket Bolts offer technicians a repair solution for higher mileage vehicles and have been specifically designed to be used for VVT sprockets to ensure that the sprockets are properly fastened. Designed and manufactured using premium materials. Meets bolt specifications to be compliant with installation instructions. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.

Product Features:

Manufactured from high-strength materials to handle the torque and clamping demands, maintaining system stability
Precision- engineered fasteners designed specifically for VVT sprockets, ensuring a secure, OE-quality fit
100% production-tested verified specifications for proper torque retention and load clamping, reducing the risk of loosening or system failure
Provides technicians with installation confidence, knowing they’re using fasteners designed specifically for the job.

from

$59.99

Powerbond Premium OEM Replacement Balancers are manufactured using premium ductile iron castings and injection bonded dampening rubber. Unlike typical original equipment balancers that are made with press inserted dampening rubber, the bonded dampening rubber in the Powerbond Premium OEM Replacement Balancer provides superior bonding strength between the inner and outer balancer rings that minimizes spinning and dislocation in high torque and serpentine belt appplications. With a unique combination of high strength castings, bonded dampening rubber, and dynamic balance, the Powerbond Premium OEM Replacement Balancer is the ultimate standard replacement balancer.

Product Features:

Designed as a premium OE replacement
Dynamically balanced for smooth operation
Strong Iron casting for maximum strength
OEM equivalent bonded rubber

from

$113.99

Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$18.29

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Meets or exceeds OEM specifications

from

$9.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$87.99

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
1.84″ OD; For Oil Pump

from

$12.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. An oil pump chain tensioner maintains appropriate tension on the oil pump chain. Depending on design and application, Cloyes engine oil pump chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.

Product Features:

CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience.
.
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

Upgrade your 2011 Chrysler 200 with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2011 Chrysler 200, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Engine Parts are key to keeping your 200 functioning at its best. At Advance Auto Parts, we offer a wide selection of 168 Engine Parts for the 2011 Chrysler 200, designed to meet your needs without breaking the bank. From Engine Timing Part replacements to Engine Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2011 Chrysler 200 at great prices. Our Engine Parts inventory for this model ranges from just $5.89 to $4,831.99, with an average price of $162.45. Our 168 Engine Parts in stock come from 24 trusted brands, so you’re sure to find the right part for your 2011 Chrysler 200 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Chrysler 200, we stock popular OEM and aftermarket Engine Parts from top names like Felpro, Mahle, Dorman, and more. Felpro Engine Parts start at just $26.99 and boast an impressive 4.6 stars average rating from customers. Mahle and Dorman also bring quality to the table, with Engine Parts available starting at $19.99, and at an average 4.5 stars rating. With 574 customer reviews and counting, our 2011 Chrysler 200 Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Chrysler 200 is always ready to roll. We’re committed to providing you with everything you need to keep your 200 in top shape, all in one place. Start shopping confidently below for your 2011 Chrysler 200!

Best-Selling Engine Timing Parts for 2011 Chrysler 200s

Enhance the driving experience in your Chrysler with 50 quality Engine Timing Part components, starting at $7.99.

show more show less

from

$7.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$29.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$109.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$91.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service.

Product Features:

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Hydraulic; 2.24″ OD

from

$81.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$312.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.

Product Features:

Cloyes chains are pre-stressed and heat-treated.
Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
Sprockets are CAD designed, manufactured using premium material and heat-treated.
Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain.
All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing.
CAD designed and manufactured using premium materials, guides use the latest in design and material technology ensuring quiet operation and durability.
All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Backed by Limited and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

from

$77.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit ¿ delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.

Product Features:

Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments.
Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing.
Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience.
.

from

$30.99

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.

Product Features:

Extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
10.85″ OD

from

$28.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain guide serves as a guide (or track) for the timing chain, connecting the crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.

Product Features:

CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience.
.
Refer to our online catalog for detailed application-specific information

from

$51.99

Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments.
Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing.
Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience.
.

from

$464.99

Cloyes chains are pre-stressed and heat-treated.
Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
Sprockets are CAD designed, manufactured using premium material and heat-treated.
Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain.
All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing.
CAD designed and manufactured using premium materials, guides use the latest in design and material technology ensuring quiet operation and durability.
All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Backed by Limited and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

from

$393.99

Cloyes chains are pre-stressed and heat-treated.
Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
Sprockets are CAD designed, manufactured using premium material and heat-treated.
Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain.
All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing.
CAD designed and manufactured using premium materials, guides use the latest in design and material technology ensuring quiet operation and durability.
All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Backed by Limited and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

from

$59.99

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$59.99

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$39.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$44.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$20.99

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Designed to meet or exceed OEM performance requirements
Refer to our online catalog for detailed application-specific information

from

$1063.00

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium,quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides , respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry,leading warranty and technical support.

Product Features:

Cloyes chains are pre,stressed and heat,treated.
Engineered and manufactured with precision pitch control to ensure optimal chain,to,sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long,term durability.
Sprockets are CAD designed, manufactured using premium material and heat,treated.
Featuring precision,tooled tooth form, bore, off,set and timing index for superior fit, reliability, and long,term performance in engine timing repairs.
Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain.
All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing.
CAD designed and manufactured using premium materials, guides use the latest in design and material technology ensuring quiet operation and durability.
All timing components designed in the USA and manufactured using premium materials for OE,level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Backed by Limited Lifetime Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

from

$501.99

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Crankshaft Sprocket, Oil Pump Sprocket, Idler Sprocket, Timing Chain (4), Chain Tensioner (3), Chain Guide (3), Tensioner Guide (2), Oil Pump Tensioner

from

$393.99

Cloyes chains are pre-stressed and heat-treated.
Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
Sprockets are CAD designed, manufactured using premium material and heat-treated.
Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain.
All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing.
CAD designed and manufactured using premium materials, guides use the latest in design and material technology ensuring quiet operation and durability.
All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Backed by Limited and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

from

$389.99

This engine timing chain tensioner is designed to match the fit and function of the original tensioner on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine timing chain tensioner is designed to match the fit and function of the original tensioner on specified applications
Recommended for replacement when a new timing chain and pulleys are installed
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$364.99

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Timing Chain, Oil Pump Chain, Crankshaft Sprocket, Tensioner Guide (2), Chain Tensioner (2), Chain Guide (2) Does Not Contain Variable Valve Timing (VVT) Sprocket; Does Not Contain Camshaft Sprocket

from

$198.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$180.99

The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.

Product Features:

Direct replacement – this VVT sprocket fits and performs like the original sprocket
Durable construction – made from durable steel and precision machined for reliable performance
100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
Quality assured – vehicle-specific application has been validation tested to ensure quality

Most Popular 2011 Chrysler 200 Engine Mounts

Customize your Chrysler with 6 Engine Mounts products like Engine Mounts, all priced under $89.99.

show more show less

from

$53.99

Anchor 3155 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

from

$39.99

Anchor 3152 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

from

$49.99

Anchor 3256 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

from

$59.99

Anchor 3167 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

from

$59.99

Anchor 3274 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

from

$89.99

This mount supports the engine and dampens vibration. All mounts are engineered and designed to OEM standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality. Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance, aging stability to ensure maximum life, and performance. Any included fasteners are hardened steel with heat treated Grade 5 bolts. Chemlock bonding agent is used to ensure a superior rubber-to-metal bond. All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements. Hydraulic Mounts, applicable where OE, are engineered for high vibration and torque applications and filled with special hydraulic fluid to dampen excess noise and vibration.

Product Features:

This mount supports the engine and dampens vibration.
Natural and SBR rubber provide maximum life and performance.
Steel fasteners are heat treated grade 5 bolts.
A special bonding agent is used to ensure a rubber to metal bond.
Rubber material is mixed to specific Durometer, hardness.
Limited Warranty.
All mounts are specifically engineered and designed to OE standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality.
Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance and aging stability to ensure maximum life and performance.
Any included fasteners are hardened steel with heat treated Grade No. 5 bolts.
Chemlock bonding agent is used to ensure a superior rubber-to-metal bond.
All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements.
Hydraulic Mounts, applicable where OE, are specifically engineered for high vibration and torque applications and are filled with special hydraulic fluid to dampen excess noise and vibration.

Top Picks for 2011 Chrysler 200 Valve Cover and Cylinder Heads

Upgrade Chrysler 200s with top-quality Valve Cover and Cylinder Heads parts, including 21 OEM and aftermarket selections for your 2011 model.

show more show less

from

$66.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$67.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$46.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$9.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$379.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$166.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$59.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$58.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Cylinder head gaskets are sold individually and may require new head bolts based on application.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$56.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$179.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$681.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$668.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$281.99

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$195.99

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$179.99

The components in this valve cover kit are designed to match the fit and function of the original equipment on specified vehicles. In addition to a precision-manufactured valve cover for the right side of the engine (for transverse-mounted engines, this would be the side of the engine closest to the firewall, or Bank 1 side), the kit includes a gasket, spark plug tube seals, and factory-style captive hardware. Engineered to help protect the engine components and prevent oil leaks, this kit provides everything needed to replace a warped or damaged valve cover.

Product Features:

Direct replacement – the components in this valve cover kit are designed to match the fit and function of the original equipment on specified vehicles
Ideal solution – engineered to help protect the engine components and prevent oil leaks, this kit provides everything needed to replace a warped or damaged valve cover
Location-specific – includes a precision-manufactured valve cover for the right or firewall side of the engine, gasket, spark plug tube seals, and factory-style captive hardware for a complete repair
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$92.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function.
Meets or exceeds OE specifications

from

$87.99

Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Head bolt replacement recommended.
Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.
When a specific tightening torque has been reached, the bolts are turned further through a defined angle, which pre-loads them into the plastic region. Consequently, no retorquing is necessary.

from

$83.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Multi-Layer steel construction.
Embossed full hard stainless steel construction.
Application specific rubber coating for unsurpassed sealability

from

$45.49

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications.

from

$17.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$6.99

Our high-quality valve train components are built to handle the hotter temperatures and higher pressure of increasingly smaller engines. These repair solutions can meet growing demands on the combustion process and help increase engine service life.

In-Demand Engine Gaskets and Seals for 2011 Chrysler 200s

Select from 21 premium Engine Gaskets and Seals parts for your 2011 Chrysler 200, with prices ranging from $8.49 to $215.99.

show more show less

from

$41.99

DESIGNED FOR IMPERFECT SEALING SURFACES: Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES: Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE: Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED: Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR: Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$93.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$26.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$19.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$42.49

MAHLEÂ® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Valve cover gasket set contains all the gaskets required – may also contain spark plug tube seals and grommets if necessary.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$29.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$40.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$85.99

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$42.49

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Oil pan gasket set contains all gaskets required.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$55.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$39.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$44.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$11.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$215.99

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$103.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Application specific molded rubber construction.
Engineered cross section.
Includes all components required to complete the repair.

from

$97.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Timing cover gasket set contains the timing cover seal and timing cover gasket(s) where required.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$52.99

Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Includes Reinzosil universal silicone sealing compound.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications.

from

$49.49

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Low friction, Minimum power consumption, High chemical resistance, Low breakaway torque after standstill.
Able to be used in applications with minimal lubrication.
Thermal properties with a wide range of operating temperatures.

from

$37.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$34.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function.
Meets or exceeds OE specifications

from

$8.49

Victor Reinz Reinzosil is a permanently elastic, universal silicone sealing compound that is resistant to extreme temperatures, mineral oils, numerous synthetic oils, lubricants, gasoline, diesel/biodiesel fuels, greases, hot and cold water, detergents, sunlight, ozone, and salt water. Its durability, flexibility, and versatility make it a favourite among import car repair specialists. Reinzosil is the RTV sealant of choice in Europe; now, Victor Reinz brings this exceptional, in-demand product to the North American aftermarket. Reinzosil is so versatile that it can replace a dozen or more other varieties of RTV, eliminating excessive SKUs and saving valuable inventory space., Victor Reinz Reinzosil is a permanently elastic, universal silicone sealing compound that is resistant to extreme temperatures, mineral oils, numerous synthetic oils, lubricants, gasoline, diesel/biodiesel fuels, greases, hot and cold water, detergents, sunlight, ozone, and salt water. Its durability, flexibility, and versatility make it a favourite among import car repair specialists. Reinzosil is the RTV sealant of choice in Europe; now, Victor Reinz brings this exceptional, in-demand product to the North American aftermarket. Reinzosil is so versatile that it can replace a dozen or more other varieties of RTV, eliminating excessive SKUs and saving valuable inventory space.

Product Features:

Resistant to temperatures from -58 Deg F to 608 Deg F (-50 Deg C to 320 Deg C)
Insignificant shrinkage and loss of mass even in high-heat environments.
Fast-curing, low-odor, noncorrosive (pH neutral, non-acidic, non-oxidizing), and will not harm oxygen sensors
Sealing gap 0.006 in (0.15 mm)

Most Sold 2011 Chrysler 200 Camshafts

Explore our best-selling Chrysler parts for the 2011 200 among 13 OEM and aftermarket options starting from $5.89.

show more show less

from

$31.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$41.99

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$47.99

The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$37.99

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$69.99

Encore Automotive Genuine OE camshaft position sensor communicates with the ECU to accurately prompt the injectors and ignition timing. This will ensure the engine runs smooth. Encore Automotive partners with the world¿s leading automakers to bring the latest Genuine OE and high-quality aftermarket components to market. You¿re willing to do the work to keep your car or truck going ¿ so, it only makes sense to go with Encore Automotive parts because when it comes to quality, fit and convenience, Encore has you covered.

Product Features:

Genuine OE Part
Accurately measures and communicates the position of the crankshaft to the engine control unit (ECU) during the engine ignition cycle
Excellent material quality for improved resistance

from

$147.99

CAM POSITION SENSOR

from

$76.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$28.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Not impacted by temperature changes and provide robust, long-lasting sensor protection
Designed digital output for maximum signal to noise ratio
All parts used in the manufacture process are Delphi validated
Not impacted by temperature changes and provide robust, long-lasting sensor protection

from

$10.49

Sealed Power parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Formulated for pre-lubrication cam lobes, lifters & engine bearings
Increases load carrying capacity
Holds fast to surfaces
Exacting tolerances
Meets or exceeds OEM specifications
4.0 oz. Squeeze Container

from

$9.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$9.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$8.49

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$5.89

Made In USA. 4 oz. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

Top-Rated Engine Parts Brands For Your 2011 Chrysler 200

Shop for the best-rated brands offering Engine Parts and other products for your 2011 Chrysler 200s. Below you’ll find some of our best rated Engine Parts from Felpro, Mahle, and Dorman, and more. Engine Parts from these brands that fit a 2011 200 start at just $19.99 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 2011 Chrysler 200 Engine Parts

When it comes to maintaining or upgrading your 2011 Chrysler 200, using quality Engine Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Engine Parts, specifically designed for the 2011 Chrysler 200. With over 3 Felpro brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $26.99, with an average price of just $54.32. Plus, with over 41 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $93.99

(6)

Engine Valve Cover Gasket Set

“Fits perfectly”

from $41.99

(25)

Fuel Injection Plenum Gasket Set

“Good gaskets. Replaced them while I was in there changing a coil and spark plug”

from $26.99

(10)

Engine Valve Cover Gasket Set

“Great fit for Jeep Patriot 2.4L”

Popular Mahle 2011 Chrysler 200 Engine Parts

Mahle auto parts is one of the highest quality Engine Part brands in the market. Any 2011 Chrysler 200 owner should feel confident when installing genuine Mahle parts in their vehicle. To ensure the best fit and performance for your 2011 200, Advance Auto Parts carries a full inventory of 2 Mahle Engine Parts. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these Mahle Engine Parts range from $19.99 to $42.49, plus, with more than 8 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $19.99

(4)

Engine Oil Cooler Gasket Set

“The boards are working properly, they worked precisely, and I have no problems so far.”

from $42.49

(4)

Engine Valve Cover Gasket Set

“fits great works great”

FAQs for 2011 Chrysler 200 Engine Parts

Which Engine Parts are best-sellers for 2011 Chrysler 200s?

Out of 168 Engine Parts that fit 2011 Chrysler 200s, the following parts are the top sellers:

Temperature Sensor (12422820) – $42.99
Crankshaft Sensor (12351812) – $26.99
Camshaft Sensor (12339309) – $31.99

What’s the price range for 2011 Chrysler 200 Engine Parts?

Engine Part prices for the 2011 Chrysler 200 start at $5.89 and go up to $4,831.99 for the most premium parts.

What’s the average price of a Engine Part for a 2011 Chrysler 200?

The average price for Engine Parts for the 2011 Chrysler 200 is $162.45. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chrysler 200 model years?

Yes, we currently carry Engine Parts for 5 model years of Chrysler 200s between 2012 and 2017. Engine Parts are bought most frequently for the following model years: 2017, 2016, 2015, 2014, 2013, and 2012.

What are the cheapest Engine Parts for my 2011 Chrysler 200?

The cheapest 2011 Chrysler 200 Engine Parts we carry in stock are:

Stock Replacement Engine Assembly Lubricant, 4 oz. (50175373) – $5.89
Multi-Purpose O-Ring (15780810) – $5.99
Engine Valve Lifter (50262573) – $6.99
Engine Camshaft Seal Kit (15780206) – $7.99
REINZOSIL RTV Silicone (12588189) – $8.49

What are the top-rated Engine Parts that fit the 2011 Chrysler 200?

Out of 574 reviews by customers, our 2011 Chrysler 200 Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2011 Chrysler 200 and their top-rated products:

Engine Gaskets and Seals
- Engine Oil Pan Gasket Set, 17 Bolt Hole, One Piece Gasket (10700389) – $29.99
- Fuel Injection Plenum Gasket Set (10900879) – $41.99
- Engine Valve Cover Gasket Set (20780353) – $26.99

What types of Engine Parts do you sell for my 2011 Chrysler 200?

As of 6/2/26, these are some of the most in-demand types of Engine Parts for a 2011 Chrysler 200:

Can I get help with 2011 Chrysler 200 Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Engine Parts and more.

What is your return policy for Chrysler 200 Engine Parts?

Advance Auto Parts keeps returns simple. For new Chrysler 200 Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2011 Chrysler 200 Engine Parts

Carquest Premium – Engine Variable Valve Timing (VVT) Adjuster (Part No.VVC1048)

MAHLE Original – Engine Timing Cover Gasket Set (Part No.JV5173)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S1145)

Sealed Power – Engine Piston Ring Set (Part No.E1001KC 1.00MM)

Cloyes Gear – Engine Timing Chain Tensioner Guide (Part No.9-5684)

Dorman – Valve Covers: Direct Replacement, Plastic (Part No.264-939)

Spartan – Engine Long Block; Chrysler 2.4 11-14 CA Engine (Part No.DDX31)

Spartan – Engine Cylinder Head; Chrysler 2.4 EDD/EDE Cyl Head (Part No.2DX5)

Felpro – Engine Camshaft Seal Kit (Part No.TCS 45961)

Cloyes Gear – Engine Timing Idler Sprocket (Part No.S1006)

Felpro – Engine Conversion Gasket Set (Part No.CS 26541-1)

Carquest Premium – Engine Variable Valve Timing (VVT) Oil Control Valve (Part No.VVA1097)

Sealed Power – Engine Valve Lifter (Part No.HT-2313)

Carquest Premium – Multi-Use Connector (Part No.PTA3103)

Victor Reinz – Engine Valve Cover Gasket Set (Part No.15-10586-01)

Felpro – VALVE STEM SEAL SET (Part No.SS 71268)

Dorman – Variable Oil Pump Solenoid (OE Fix) (Part No.926-235)

Crown Auto Jeep Replacmnt – OE Replacement, Single (Part No.5184332AA)

MAHLE Original – Engine Cylinder Head Gasket (Part No.54879)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.55366298AA)

Melling – Stock Replacement Oil Pump Screen (Part No.413S)

Cloyes Gear – Engine Variable Valve Timing (VVT) Sprocket Bolt (Part No.VCB118)

PowerBond – Premium OEM Replacement Balancer (Part No.PB1707N)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Sealed Power – Engine Connecting Rod Bearing (Part No.6000A)

Victor Reinz – Engine Camshaft Seal (Part No.81-10517-00)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5563)

Cloyes Gear – Oil Pump Tensioner (Part No.9-5755)

Felpro – Engine Camshaft Seal Kit (Part No.TCS 45961)

Carquest Premium – Engine Variable Valve Timing (VVT) Adjuster (Part No.VVC1048)

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1033)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5559)

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1025)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 180 Links, Timing/Oil Pump Components, Without Sprockets (Part No.9-0736SX)

Cloyes Gear – Engine Timing Chain (Part No.C736F)

Cloyes Gear – Engine Timing Chain Tensioner Guide (Part No.9-5557)

Cloyes Gear – Engine Timing Chain Guide (Part No.9-5558)

Cloyes Gear – Engine Timing Chain (Part No.C512)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 120, 44 Links, Timing/Oil Pump Components, With Sprockets (Part No.9-0511S)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 180 Links, Timing/Oil Pump Components, With Sprockets (Part No.9-0736S)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5752)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5751)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S993)

Carquest Premium – Engine Variable Valve Timing (VVT) Oil Control Valve (Part No.VVA1097)

Cloyes Gear – Engine Timing Chain Guide (Part No.9-5750)

Cloyes Gear – Engine Timing Chain Kit (Part No.9-0511SVVT)

Dayco – Timing Chain Kit, 15 Piece Set, Chains, Sprockets, Tensioners And Guides (Part No.KTC1372)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 120, 44 Links, Timing/Oil Pump Components, Without Sprockets (Part No.9-0511SX)

Dorman – Timing Chain Tensioner Kit (Part No.420-002)

Dayco – Timing Chain Kit, 9 Piece Set, Without VVT Sprockets (Part No.KTC1399)

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1159)

Dorman – Camshaft Phaser (Part No.916-539)

Anchor – Engine Mount Rear (Part No.3155)

Anchor – Engine Mount Front (Part No.3152)

Anchor – Engine Mount Rear (Part No.3256)

Anchor – Engine Mount Right (Part No.3167)

Anchor – Engine Mount Front (Part No.3274)

Anchor – Engine Mount (Part No.3617)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72267)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72467)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26557 PT)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 72252-1)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26541 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26332 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26542 PT)

MAHLE Original – Engine Cylinder Head Gasket (Part No.54879)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26541 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26332 PT-1)

Spartan – Engine Cylinder Head; Chrysler 1.8/2.0/2.4 Cyl Head (Part No.2DX4)

Spartan – Engine Cylinder Head; Chrysler 2.4 08-13 CAL Head (Part No.2DX3)

Dorman – Engine Valve Cover (Part No.264-748)

Dorman – Valve Covers: Direct Replacement, Plastic (Part No.264-939)

Dorman – Valve Covers: with Gasket, Direct Replacement, Plastic (Part No.264-938)

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-10532-00)

Victor Reinz – Engine Cylinder Head Bolt Set (Part No.14-10127-01)

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-10531-00)

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-10029-00)

Crown Auto Jeep Replacmnt – OE Replacement, Single (Part No.5184332AA)

INA US – Engine Valve Lifter (Part No.VT0086)