2011 Chevrolet Impala Engine Control Modules (ECM)
More 2011 Chevrolet Impala Engine Control Modules (ECM)
Find your specific 2011 Chevrolet Impala original or aftermarket Engine Control Modules (ECM) below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2011 Chevrolet Impala Engine Control Modules (ECM)
ACDelco – GM Original Equipment Body Control Module (Part No.P4070578225ACD)
from
$365.93
An ACDelco GM Original Equipment Body Control Module is a GM-recommended replacement for your vehicle’s original component. It communicates with other systems in your vehicle to regulate electronic devices. This original equipment body control module has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information or equivalent describes the procedures and special tools needed to ensure proper operation in the vehicle
- Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – Body Control Module (Part No.13592590)
from
$195.99
GM Genuine Parts Body Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They communicate with other systems in your vehicle to regulate electronic devices. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Body Control Module (Part No.10350647)
from
$252.99
GM Genuine Parts Body Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They communicate with other systems in your vehicle to regulate electronic devices. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Cardone – Body Control Computer (Part No.73-4502)
from
$167.99
CARDONE Remanufactured Body Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak peformance.
Product Features:
See More
Product Features:
- 100% re-soldering of critical components ensures superior electrical connections, prevents intermittent failures and extends product life.
- All modules are 100% tested with automated computerized test equipment to ensure functionality and reliability.
- Each unit comes loaded with the latest O.E. software calibration available, where applicable.
- On-car validation routines ensure that modules meet all form, fit, durability and performance requirements.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
GM Genuine Parts – Body Control Module (Part No.13594692)
from
$166.99
GM Genuine Parts Body Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They communicate with other systems in your vehicle to regulate electronic devices. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Dorman – Remanufactured Body Control Module (Part No.502-019)
from
$151.99
This remanufactured body control module (BCM) is thoroughly tested and refurbished as required to restore various accessory functions and prevent damage to related components.
Product Features:
See More
Product Features:
- Thoroughly remanufactured – this body control module has been rebuilt in a dedicated electronics manufacturing facility in North America
- Durable construction – this control module has been thoroughly refurbished for reliable performance
- Cost-effective solution – offers original equipment quality at a better price than a new part
- Quality tested – this module has been individually tested to confirm function and performance
Dorman – Remanufactured Body Control Module (Part No.502-001)
from
$308.99
This remanufactured body control module (BCM) is thoroughly tested and refurbished as required to restore various accessory functions and prevent damage to related components.
Product Features:
See More
Product Features:
- Thoroughly remanufactured – this body control module has been rebuilt in a dedicated electronics manufacturing facility in North America
- Durable construction – this control module has been thoroughly refurbished for reliable performance
- Cost-effective solution – offers original equipment quality at a better price than a new part
- Quality tested – this module has been individually tested to confirm function and performance
Cardone – Body Control Computer (Part No.73-4203)
from
$167.99
CARDONE Remanufactured Body Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak peformance.
Product Features:
See More
Product Features:
- 100% re-soldering of critical components ensures superior electrical connections, prevents intermittent failures and extends product life.
- All modules are 100% tested with automated computerized test equipment to ensure functionality and reliability.
- Each unit comes loaded with the latest O.E. software calibration available, where applicable.
- On-car validation routines ensure that modules meet all form, fit, durability and performance requirements.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
GM Genuine Parts – Body Control Module (Part No.22860591)
from
$329.99
GM Genuine Parts Body Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They communicate with other systems in your vehicle to regulate electronic devices. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
BSE Original – Engine Control Computer (Part No.ECC4810)
from
$112.99
Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.
Product Features:
See More
Product Features:
- BSE Engine Control Computers are remanufactured to perform 100% like new components. OEM designs are analyzed, and where applicable, design upgrades are implemented to provide improved durability over the OEM design.
- 100% of critical component connections are re-soldered to ensure optimum electrical connections and improved reliability.
- We use automated computerized test equipment to ensure functionality and reliability.
- All parts are Original Equipment Manufacturer parts are restored back to OEM specifications for OE fit form and function.
GM Genuine Parts – Engine Control Module (Part No.12625455)
from
$309.99
GM Genuine Parts Engine Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules regulate various parts of your vehicle’s engine by receiving input from sensors and additional modules and then referencing that information back to other sensors, modules, and areas of the vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
ACDelco – GM Original Equipment Powertrain Control Module, Remanufactured (Part No.C6040431392ACD)
from
$370.10
An ACDelco GM Original Equipment Remanufactured Engine Control Module is a GM-recommended replacement for your vehicle’s original component. It regulates various parts of your vehicles engine by taking the inputs from sensors and additional modules and referencing that information back to other sensors, modules, and other areas of the vehicle. Remanufacturing the engine control module is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. This original equipment engine control module is engineered to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Cardone – Engine Control Module (Part No.77-5500)
from
$169.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Cardone – Engine Control Module (Part No.77-6868)
from
$153.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Cardone – Engine Control Module (Part No.77-5950)
from
$118.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
BSE Original – Engine Control Computer (Part No.ECC5550)
from
$120.99
Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.
Product Features:
See More
Product Features:
- BSE Engine Control Computers are remanufactured to perform 100% like new components. OEM designs are analyzed, and where applicable, design upgrades are implemented to provide improved durability over the OEM design.
- 100% of critical component connections are re-soldered to ensure optimum electrical connections and improved reliability.
- We use automated computerized test equipment to ensure functionality and reliability.
- All parts are Original Equipment Manufacturer parts are restored back to OEM specifications for OE fit form and function.
ACDelco – GM Original Equipment Powertrain Control Module (Part No.C6040431391ACD)
from
$423.56
The ACDelco GM Original Equipment Powertrain Control Module monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. It regulates various parts of your vehicle’s engine by taking the inputs from sensors and additional modules and referencing that information back to other sensors, modules, and other areas of the vehicle. This original equipment engine control module has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – Powertrain Control Module (Part No.19210738)
from
$328.99
GM Genuine Parts Refurbished Engine Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Refurbishing GM Genuine Parts Engine Control Modules involve returning the failed part to a factory certified repair facility for cleaning, inspection, and diagnosis. Any faulty components are identified and replaced when necessary, and the repaired unit is tested again to ensure it functions to GM specifications. In addition, refurbishing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- Refurbishing is an industry standard practice that returns parts into service rather than scrapping them
- Tested to ensure they perform to GM specifications
GM Genuine Parts – Powertrain Control Module (Part No.216-87)
from
$299.99
GM Genuine Parts Remanufactured Engine Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They regulate various parts of your vehicle’s engine by receiving input from sensors and additional modules and referencing that information back to other sensors, modules, and areas of the vehicle. Remanufacturing the engine control module is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and completed units are tested to help ensure they perform to GM specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
Cardone – Engine Control Module (Part No.77-4770)
from
$123.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Cardone – Engine Control Module (Part No.77-4670)
from
$126.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Cardone – Engine Control Module (Part No.77-6024)
from
$164.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
GM Genuine Parts – Engine Control Module (Part No.216-140)
from
$319.99
GM Genuine Parts Engine Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules regulate various parts of your vehicle’s engine by receiving input from sensors and additional modules and then referencing that information back to other sensors, modules, and areas of the vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Cardone – Engine Control Module (Part No.77-6025)
from
$164.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
GM Genuine Parts – Engine Control Module Assembly (Part No.12651994)
from
$382.99
GM Genuine Parts Engine Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules regulate various parts of your vehicle’s engine by receiving input from sensors and additional modules and then referencing that information back to other sensors, modules, and areas of the vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Cardone – Engine Control Module (Part No.77-6865)
from
$183.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
GM Genuine Parts – Engine Control Module Assembly (Part No.12653998)
from
$367.99
GM Genuine Parts Engine Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules regulate various parts of your vehicle’s engine by receiving input from sensors and additional modules and then referencing that information back to other sensors, modules, and areas of the vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Cardone – Engine Control Module (Part No.77-4810)
from
$110.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Popular 2011 Chevrolet Impala Engine Control Modules (ECM) Categories
2011 Chevrolet Impala Engine Control Modules (ECM)
Maybe you’re in the middle of a full rebuild of that 2011 Chevrolet Impala. Maybe you just need a couple of Engine Control Modules (ECM). Either way, Advance Auto Parts has 5 different Engine Control Modules (ECM) in our inventory ranging from $308.99 to $423.56. That means you can find the exact parts or products you need to keep that 2011 Chevrolet Impala running smoothly.
Engine Control Modules (ECM) are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Chevrolet Impala. GM Genuine Parts, AC Delco, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Engine Control Modules (ECM) for your 2011 Chevrolet Impala, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Engine Control Modules (ECM) to keep your 2011 Chevrolet Impala rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Engine Control Modules (ECM) Brands To Make Your 2011 Chevrolet Impala Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Chevrolet Impala demands trusted brand parts and products to keep it running. Many trusted brands of Engine Control Modules (ECM) make up Advance Auto Parts’ inventory, and all are ready to help make your Impala the best it can be. Be sure to browse some of our top Engine Control Modules (ECM) brands and parts.
FAQs for 2011 Chevrolet Impala Engine Control Modules (ECM)
What are the most purchased Engine Control Modules (ECM) for the 2011 Chevrolet Impala?
Out of 5 Engine Control Modules (ECM) for the 2011 Chevrolet Impala, the most popular in our inventory are:
from
$365.93
This product is not rated
GM Original Equipment Body Control Module
Body Control Computers
