2011 Chevrolet Camaro Suspension Parts

Below you will find various in-demand Chevrolet Suspension Parts, components and accessories for your 2011 Camaro. Advance Auto Parts has popular Camaro parts like Coil and Leaf Springs, Control Arms, Air Suspension and Kits and more. You’ll also find aftermarket and OEM Suspension Parts for other Camaro model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2011 Chevrolet Camaro Suspension Parts below and start saving instantly.

Popular 2011 Chevrolet Camaro Suspension Parts Categories

Suspension Self-Leveling Unit Fluids

Suspension Strut and Coil Spring Assemblies

Rear Shock and Struts

Front Shock and Struts

Active Suspension Relays

Front and Rear Shock or Strut Kits

Suspension Strut Bumper and Bellows Kits

Lower Control Arms

Shock Mounts

Suspension Strut Mounting Kits

Shock Boots, Levelers, and Accessories

Helper Springs

Trailing Arms

Lower Control Arm Bushings

Strut Bellows

Strut Mounts

Auto Level Control Relays

Coil Spring Lowering Kits

Stability Control Steering Angle Sensors

Essential Suspension Parts for 2011 Chevrolet Camaros

from

$72.99

Product Features:

Adds up to 25% more damping performance over original equipment shocks
Components and valving designed specifically for classic cars
High gas pressure design provides instant, extra control
Monotube design outperforms all other standard shock absorbers
Unique, air-free, hydraulic unit eliminates performance fade

from

$27.99

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$6.99

Driveworks Shock Mount, Suspension Strut Bellows

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$28.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$365.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle control & handling Reduces tire wear Increases the Life of Other Steering and Suspension Components

from

$74.99

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$117.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Engineered to meet or exceed OE requirements
Superior rubber to steel bonding for durability
High polish chrome steel bearing races
Replacement helps restore vehicle handling
Includes new spring seat insulator and installation hardware to eliminate noise issues
Electroplate and corrosion-resistant coating to help prevent galvanic corrosion

from

$31.49

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$74.50

The KYB Gas-a-Just shock absorber is engineered to significantly increase vehicle stability, handling and performance. The KYB Gas-a-Just shock absorber is a more responsive mono-tube design that automatically adjusts to driving conditions and is an ideal upgrade from an OE twin-tube design.

Product Features:

Direct fit application for ease of installation
Gas-a-Just is the replacement for an OE monotube shock
Ideal as an upgrade from an OE twin-tube
The more responsive monotube design automatically adjusts to driving conditions
Applications for cars, trucks, vans, and SUV’s

from

$5.99

New Goodmark Upper Rear Shock Mount, Bolt-On, 2 Required, Made Of Steel

Product Features:

Bolt-On 2 Required Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$42.99

Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.

Product Features:

Direct replacement – this suspension trailing arm fits and functions like the original equipment part.
Quality construction – manufactured from same materials as original equipment for safety and reliability.
Durable – protective finish for long-lasting corrosion resistance
Quality tested – has undergone testing to ensure proper fit and performance

from

$39.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$51.99

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$32.99

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$14.99

Modern transmissions are better than ever, with more gears to help improve fuel efficiency and acceleration. Greater performance calls for greater protection. Valvoline Extended Protection Full Synthetic ATF features our exclusive Dual Defense Additive Technology for two layers of protection against metal-on-metal contact and thermal breakdown, all while minimizing wear on clutch components. In fact, Valvoline Extended Protection Full Synthetic ATF is 45% stronger against breakdown compared to major brand DEX/MERC oxidative PDSC performance. Proven to maximize transmission life, our patented formula is suitable for use in 92% of vehicles in light duty automatic transmissions 2010 and newer. Keep your modern vehicle shifting smoothly, mile after mile, with the ultimate protection you can only expect from Valvoline, the #1 ATF brand.

Product Features:

The ultimate protection for your automatic transmission
45% stronger against breakdown
Dual Defense Additive Technology combines friction modifiers and anti-wear additives for two layers of protection
Suitable for use in over 92% of vehicles in light duty automatic transmissions 2010 and newer

from

$6.29

Max Performance Synthetic Power Steering Fluid

from

$179.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat (where applicable)
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets (where applicable)
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$283.99

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

from

$309.99

Quick Strut Kit

from

$329.99

Quick Strut Kit

from

$419.99

aFe Control is proud to release the PFADT Series, Lowering Kit for 2005 & Up Corvette C6 & C7. This lowering kit is designed to lower your C6/C7 up to 1.25″ enhancing the sleek, body lines, and giving it a more aggressive, stylish look. Designed to work with the factory transverse leaf springs, the package includes 4 lowering bolts. These aren’t ordinary bolts, unlike the factory bolt and pad, our bolts feature a CNC, machined stainless steel stud with wrench flats, mated to a articulating foot, and a nylon foot pad. This design offers years of corrosion resistance and smooth suspension articulation, and quiet operation. Designed as a direct fit installation, no modifications is necessary. The lowering kit can be used with factory shock absorbers, or for a even better ride, try our Johnny O’Connell signature series shock upgrade.

Product Features:

Engineered To Optimize The Factory Shock Absorber Damping
1 To 1.25 in. Of Drop For Correct Relation Between Looks/Function
Engineering Design and Race Testing Ensures Ultimate Quality
Powder coat Gloss Silver For Unbeatable Looks And Durability

from

$95.19

Control Arm

from

$194.99

CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.

Product Features:

Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
Pre-installed bushings (when applicable) for easy installation
Pre-installed bracket (where applicable) for a complete repair, saving time and labor.

from

$94.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$18.79

Control Arm Bushing

from

$30.49

Backed by superior materials and rigorous testing, MOOG Problem Solver vertical control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

SMOOTH ROTATION — Exclusive ball and socket design allows for smooth rotational movement
EASY TO INSTALL — Design saves time during installation by aligning the bushing sleeve to insert the bolt
LOW MAINTENANCE — Bushing assembly is permanently lubricated and sealed with premium MOOG boot helps prevent contamination
PREMIUM MATERIALS — Made from high-quality polymer and steel compounds for durability and ride performance
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Easier to install and lasts longer than typical OE designs

from

$57.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$40.07

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Bushing Kit is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.
Kit includes bushings and hardware – (SEE Note)

Upgrade your 2011 Chevrolet Camaro with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2011 Chevrolet Camaro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Suspension Parts are key to keeping your Camaro functioning at its best. At Advance Auto Parts, we offer a wide selection of 61 Suspension Parts for the 2011 Chevrolet Camaro, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Control Arms upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2011 Chevrolet Camaro at great prices. Our Suspension Parts inventory for this model ranges from just $6.29 to $423.99, with an average price of $133.16. Our 61 Suspension Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 2011 Chevrolet Camaro without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Chevrolet Camaro, we stock popular OEM and aftermarket Suspension Parts from top names like Valvoline, and more. Valvoline Suspension Parts start at just $14.99 and boast an impressive 5 stars average rating from customers. With 1,872 customer reviews and counting, our 2011 Chevrolet Camaro Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Chevrolet Camaro is always ready to roll. We’re committed to providing you with everything you need to keep your Camaro in top shape, all in one place. Start shopping confidently below for your 2011 Chevrolet Camaro!

Best-Selling Coil and Leaf Springs for 2011 Chevrolet Camaros

Enhance the driving experience in your Chevrolet with 11 quality Coil and Leaf Spring components, starting at $137.99.

show more show less

from

$269.99

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

from

$423.99

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

from

$423.99

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

from

$179.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$179.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$419.99

Engineered To Optimize The Factory Shock Absorber Damping
1 To 1.25 in. Of Drop For Correct Relation Between Looks/Function
Engineering Design and Race Testing Ensures Ultimate Quality
Powder coat Gloss Silver For Unbeatable Looks And Durability

from

$169.99

Quick Strut

from

$169.99

Quick Strut

from

$159.99

Quick Strut

from

$137.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$137.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

Most Popular 2011 Chevrolet Camaro Control Arms

Customize your Chevrolet with 13 Control Arms products like Lower Control Arm Bushings and Lower Control Arms, all priced under $194.99.

show more show less

from

$77.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Engineered to match or exceed OE requirements
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose

from

$65.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$194.99

Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
Pre-installed bushings (when applicable) for easy installation
Pre-installed bracket (where applicable) for a complete repair, saving time and labor.

from

$154.99

Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
Pre-installed bushings (when applicable) for easy installation
Pre-installed bracket (where applicable) for a complete repair, saving time and labor.

from

$149.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$138.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$123.98

Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm and Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
Direct replacement for a trouble-free installation
Steel, iron or aluminum construction ensures durability
Powder-coated or painted for long-lasting rust and corrosion resistance

from

$116.99

Providing +/- 1.5deg camber adjustment (on car), WHITELINE’S kit is the economical solution for correcting alignment and prolonging tyre life especially on vehicles which are lowered, load carrying and/ or running expensive low profile tyres.

Product Features:

Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

from

$95.19

Control Arm

from

$70.99

Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$69.99

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$53.99

Control Arm

from

$42.99

Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self lubrication for optimum friction management.

Top Picks for 2011 Chevrolet Camaro Air Suspension and Kits

Upgrade Chevrolet Camaros with top-quality Air Suspension and Kits parts, including 10 OEM and aftermarket selections for your 2011 model.

show more show less

from

$36.49

Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$27.99

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$28.49

from

$32.99

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$17.29

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$74.99

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$329.99

Quick Strut Kit

from

$309.99

Quick Strut Kit

from

$14.99

The ultimate protection for your automatic transmission
45% stronger against breakdown
Dual Defense Additive Technology combines friction modifiers and anti-wear additives for two layers of protection
Suitable for use in over 92% of vehicles in light duty automatic transmissions 2010 and newer

from

$6.29

Max Performance Synthetic Power Steering Fluid

In-Demand Shocks and Struts for 2011 Chevrolet Camaros

Select from 24 premium Shocks and Struts parts for your 2011 Chevrolet Camaro, with prices ranging from $31.49 to $394.99.

show more show less

from

$49.30

The KYB Excel-G OE-equivalent direct fit shock absorber is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Restores a vehicle’s originally designed handling and control

Product Features:

Direct fit application for ease of installation
Calibrated to compensate for worn suspensions
Components and valving are designed specifically for each application
The best choice to restore OE performance and normal driving conditions
Built with quality that matches or exceeds OE
Coverage for domestic and import cars, trucks, vans, minivans, and SUVs

from

$36.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$31.49

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$35.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$35.99

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$173.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$100.99

High polish chrome steel bearing races
Replacement helps restore vehicle handling
Superior rubber to steel bonding for durability
Engineered to meet or exceed OE requirements
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features

from

$233.99

Featuring a vehicle-specific design, Monroe® Quick-Strut® strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR — Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT — Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN — Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY — Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MADE TO LAST — Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
MAINTAINS VEHICLE CONTROL — Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING — Premium upper strut mount helps ensure smooth, “like-new” steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE — Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
ASSEMBLED IN THE USA — Each Quick-Strut assembly is assembled with pride in Paragould, Arkansas

from

$173.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$394.99

Carquest complete strut assemblies include all the components required for strut replacement. The Carquest strut assembly has been rigorously quality-tested, providing high-quality, proven reliability and reducing installation time. The Carquest strut assembly has been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

Premium quality, U.S. grade steel, corrosion resistant coil spring.
NOK seals, steel piston valves, hard-chromed piston rod and premium oil.
Urethane rubber molded boot kit & bumper.
OEM quality upper strut mount, bearing plate and brackets.
Ready to install. Save time, eliminating installation processes like removing coil springs.
An economical replacement alternative to ensure a complete repair. Save money from investing in expensive spring compressors.

from

$394.99

Premium quality, U.S. grade steel, corrosion resistant coil spring.
NOK seals, steel piston valves, hard-chromed piston rod and premium oil.
Urethane rubber molded boot kit & bumper.
OEM quality upper strut mount, bearing plate and brackets.
Ready to install. Save time, eliminating installation processes like removing coil springs.
An economical replacement alternative to ensure a complete repair. Save money from investing in expensive spring compressors.

from

$122.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

KYB Recommended Orem Replacement Shock For Performance Cars
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Chevrolet Camaro
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
To Reduce The Chance Of Noise And Vibration KYB Recommends Installing New Strut Mounts, Part Numbers: Sm5582 & Sm5583

from

$74.50

Direct fit application for ease of installation
Gas-a-Just is the replacement for an OE monotube shock
Ideal as an upgrade from an OE twin-tube
The more responsive monotube design automatically adjusts to driving conditions
Applications for cars, trucks, vans, and SUV’s

from

$361.99

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

from

$319.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$319.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$293.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$293.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$269.99

Drag Shock 2010 Camaro Front R

from

$259.99

Drag Shock 2010 Camaro Rear 50

from

$189.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$189.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$159.99

Quick Strut

from

$42.68

The International Suspension Group advanced engineering team designed the Ride Control Valving to allow these premium struts to sense the vehicles velocity and road conditions. The Ride Control struts adjust constantly to the road for enhanced performance, ensuring superior handling, ride control and comfort.

Product Features:

Vented Striker Plate – Eliminates seal damage and prolongs strut life
Teflon Banded Piston Seal – Provides superior sealing
Multi-Shim Valve – For superior handling control and comfort
Twin Tube Design – For extra protection, strength and durability
Micro-polished Double Chrome plated Piston – Extra protection against pitting and rusting
PBT Bump Stop – Dampens noise and stops metal to metal contact
Machine Mounting Eyes – Seamless for strength and durability

Most Sold 2011 Chevrolet Camaro Trailing Arms

Explore our best-selling Chevrolet parts for the 2011 Camaro among 2 OEM and aftermarket options starting from $39.99.

show more show less

from

$42.99

Direct replacement – this suspension trailing arm fits and functions like the original equipment part.
Quality construction – manufactured from same materials as original equipment for safety and reliability.
Durable – protective finish for long-lasting corrosion resistance
Quality tested – has undergone testing to ensure proper fit and performance

from

$39.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

Top-Rated Suspension Parts Brands For Your 2011 Chevrolet Camaro

Shop for the best-rated brands offering Suspension Parts and other products for your 2011 Chevrolet Camaros. Below you’ll find some of our best rated Suspension Parts from Valvoline, and more. Suspension Parts from these brands that fit a 2011 Camaro start at just $14.99 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2011 Chevrolet Camaro Suspension Parts

When it comes to maintaining or upgrading your 2011 Chevrolet Camaro, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 2011 Chevrolet Camaro. With over 2 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $25.74. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$14.99

This product is not rated

Extended Protection Automatic Transmission Fluid, 1 Quart

“”

from
$36.49

(446)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

“Good product”

FAQs for 2011 Chevrolet Camaro Suspension Parts

Which Suspension Parts are best-sellers for 2011 Chevrolet Camaros?

Out of 61 Suspension Parts that fit 2011 Chevrolet Camaros, the following parts are the top sellers:

Multi Purpose Relay (12460010) – $28.49
Multi-Purpose Relay (15730302) – $32.99
Multi Purpose Relay (12453392) – $17.29

What’s the price range for 2011 Chevrolet Camaro Suspension Parts?

Suspension Part prices for the 2011 Chevrolet Camaro start at $6.29 and go up to $423.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2011 Chevrolet Camaro?

The average price for Suspension Parts for the 2011 Chevrolet Camaro is $133.16. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Chevrolet Camaro model years?

Yes, we currently carry Suspension Parts for 50 model years of Chevrolet Camaros between 1967 and 2024. Suspension Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Suspension Parts for my 2011 Chevrolet Camaro?

The cheapest 2011 Chevrolet Camaro Suspension Parts we carry in stock are:

Max Performance Synthetic Power Steering Fluid (11150908) – $6.29
Extended Protection Automatic Transmission Fluid, 1 Quart (50012424) – $14.99
Multi Purpose Relay (12453392) – $17.29
Strut-Mate Strut Boot Kit (18570487) – $27.99
Multi Purpose Relay (12460010) – $28.49

What are the top-rated Suspension Parts that fit the 2011 Chevrolet Camaro?

Out of 1,872 reviews by customers, our 2011 Chevrolet Camaro Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2011 Chevrolet Camaro and their top-rated products:

Shocks and Struts
- Excel-G Shock Absorber (10756127) – $49.30
- Strut Bellows (20518174) – $36.99
- Jounce Bumper and Bellows (19170665) – $31.49

What types of Suspension Parts do you sell for my 2011 Chevrolet Camaro?

As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 2011 Chevrolet Camaro:

Can I get help with 2011 Chevrolet Camaro Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Suspension Parts and more.

What is your return policy for Chevrolet Camaro Suspension Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Camaro Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2011 Chevrolet Camaro Suspension Parts

KYB – High Pressure Monotube Gas Shock (Part No.KG4515)

Monroe – Strut-Mate Strut Boot Kit (Part No.63621)

Driveworks – Strut Bellow (Part No.DW-K90462)

Carquest Premium – Multi Purpose Relay (Part No.RAA1236)

Rare Parts – Shock Absorber (Part No.RP51255)

Monroe – Strut-Mate Strut Mounting Kit (Part No.907991)

MOOG – Strut Mount (Part No.K6516)

KYB – Jounce Bumper and Bellows (Part No.SB103)

KYB – Gas-a-Just Shock Absorber (Part No.L400010936KYX)

KAI – Shock Mount (Part No.GMK402072467)

Dorman – Suspension Control Arm (Part No.520-759)

MOOG – Trailing Arm (Part No.RK643542)

GM Genuine Parts – Multi-Purpose Relay (Part No.19118886)

GM Genuine Parts – Multi-Purpose Relay (Part No.15-81106)

Valvoline – Extended Protection Automatic Transmission Fluid, 1 Quart (Part No.899179)

Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-810099)

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172912)

Suncore – Quick Strut Kit (Part No.2-55S11623-001)

Suncore – Quick Strut Kit (Part No.2-55S11625-001)

aFe POWER – Lowering Spring Kit (Part No.410-402001-V)

ACDelco – Control Arm (Part No.L2000461518ACD)

Carquest Premium – Control Arm (Part No.810-704529)

Carquest Premium – Steering Angle Sensor (Part No.SBA3862)

Driveworks – Control Arm Bushing (Part No.DW-K6109B)

MOOG – Suspension Control Arm Bushing (Part No.K200790)

Energy Suspension – Control Arm Bushing Set (Part No.3.3165R)

TRW – Control Arm Bushing Kit (Part No.L2040457121TRW)

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.273029L)

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172336)

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172337)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-816546)

Carquest Premium – Complete Strut Assembly 18-816545: Includes Strut, Coil Spring and Mount (Part No.18-816545)

aFe POWER – Lowering Spring Kit (Part No.410-402001-V)

Suncore – Quick Strut (Part No.55S11626)

Suncore – Quick Strut (Part No.55S11625)

Suncore – Quick Strut (Part No.55S11623)

Carquest Premium – Complete Strut Assembly 28-714130L: Includes Strut, Coil Spring and Mount (Part No.28-714130L)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.28-714130R)

MOOG – Control Arm (Part No.RK643259)

Dorman – Suspension Control Arm (Part No.524-156)

Carquest Premium – Control Arm (Part No.810-704529)

Carquest Premium – Control Arm (Part No.810-704528)

Dorman – Suspension Control Arm (Part No.528-024)

Dorman – Suspension Control Arm (Part No.528-023)

Dorman – Control Arm (Part No.L2000683962DOR)

Whiteline – Control Arm Lower Rear Outer Bushing (Part No.W63430)

ACDelco – Control Arm (Part No.L2000461518ACD)

Whiteline – Control Arm Lower Front Outer Bushing (Part No.W63155)

Whiteline – Control Arm Lower Rear Inner Bushing (Part No.W63154A)

MOOG – Control Arm (Part No.RK643601)

Whiteline – Control Arm Upper Rear Inner Rear Bushing (Part No.W63348)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Monroe – Strut-Mate Strut Boot Kit (Part No.63621)

Carquest Premium – Multi Purpose Relay (Part No.RAA1236)

GM Genuine Parts – Multi-Purpose Relay (Part No.15-81106)

Carquest – Multi Purpose Relay (Part No.83A1008)

Monroe – Strut-Mate Strut Mounting Kit (Part No.907991)

Suncore – Quick Strut Kit (Part No.2-55S11625-001)

Suncore – Quick Strut Kit (Part No.2-55S11623-001)

Valvoline – Extended Protection Automatic Transmission Fluid, 1 Quart (Part No.899179)

Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)

KYB – Excel-G Shock Absorber (Part No.L400019771KYX)

MOOG – Strut Bellows (Part No.K90467)

KYB – Jounce Bumper and Bellows (Part No.SB103)

MOOG – Strut Bellows (Part No.K90462)

KYB – Jounce Bumper and Bellows (Part No.SB108)

Carquest Premium – Complete Strut Assembly 18-817031: Includes Strut, Coil Spring and Mount (Part No.18-817031)

MOOG – Suspension Strut Mount (Part No.K160214)

Monroe – Quick-Strut Complete Strut Assembly (Part No.173030R)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-817032)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.28-714114R)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.28-714114L)

KYB – Gas Strut (Part No.340070)

KYB – Gas-a-Just Shock Absorber (Part No.L400010936KYX)

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172360)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.714114R)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.714114L)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.817032)