2011 Audi A6 Suspension Parts
More 2011 Audi A6 Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 2011 Audi A6, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 2011 Audi A6 Suspension Parts
Suncore – Shock Kit (Part No.2-12S257060-001)
from
$89.99
Shock Kit
Monroe – Strut-Mate Strut Mounting Kit (Part No.904992)
from
$30.49
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
KYB – Jounce Bumper and Bellows (Part No.SB115)
from
$43.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
- Designed And Built Specifically For Audis
Febi – Sway Bar Link Nut (Part No.L1038422923FEB)
from
$1.87
Sway Bar Link Nut
Meyle – Control Arm Kit (Part No.L21021097723MEY)
from
$1485.35
Control Arm Kit
Carquest Premium – Multi Purpose Relay (Part No.RAA1245)
from
$10.29
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
First Equipment Quality – Strut Bump Stop (Part No.L303685149FEQ)
from
$2.93
FEQ’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style struts
- Are built with design and quality that matches or exceeds OE quality
Suncore – Gas Shock (Part No.12S257060)
from
$49.99
Gas Shock
TRW – Control Arm (Part No.L2000385693TRW)
from
$120.32
TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:
Product Features:
See More
Product Features:
- Aluminium forged Control Arms
- Aluminium cast Control Arms – low weight/high performance
- Steel forged Control Arms
- Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
- Temperature resistant
- Low-torque/high comfort solution
- Ball stud diameters ranging from 25 to 42mm
- Integral and non-integral designs Built in Bushes:
- Rubber Bushes
- Rubber and Metal Bushes
- Hydraulic Bushes
Suncore – SuspAirBag/Bellows (Part No.299A-15-F-PAIR)
from
$384.99
SuspAirBag/Bellows
Meyle – Shock Bellows / Dust Boot (Part No.L403085203MEY)
from
$5.55
The Meyle Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Manufactured with design and quality that matches or exceeds OE quality
- Resistant to oil and other contaminants
MOOG – Strut Bellows (Part No.K90461)
from
$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Suncore – Quick Strut Kit (Part No.2-55S11230-001)
from
$409.99
Quick Strut Kit
Suncore – Elec. Air Strut (Part No.340A-28-FR)
from
$684.99
Elec. Air Strut
Monroe – Strut-Mate Strut Mounting Kit (Part No.904965)
from
$27.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
MOOG – Strut Mount (Part No.K160001)
from
$51.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- High polish chrome steel bearing races
- Replacement helps restore vehicle handling
- Superior rubber to steel bonding for durability
- Engineered to meet or exceed OE requirements
- Provides like-new steering ease of installation and longer life
- Incorporates proven design and engineering features
Carquest Premium – Complete Strut Assembly 18-811045L: Includes Strut, Coil Spring and Mount (Part No.18-811045L)
from
$159.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
See More
Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-811045R)
from
$159.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
Product Features:
See More
Product Features:
- Nuts and Bolt: SAE Standard Grade
- Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
- Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
- Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
- Outer Tube: Long-lasting corrosion and rust protection.
- Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
- Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
- Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
- Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
- Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
Suncore – Air Spring Kit (Part No.340A-15-R-PAIR)
from
$369.99
Air Spring Kit
Corteco – Control Arm Bushing (Part No.L203085099CFW)
from
$8.77
CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
Lemfoerder – Control Arm Bushing (Part No.L2030393673LEM)
from
$21.05
The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
MOOG – Control Arm Bushing (Part No.K200096)
from
$29.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Bushings manufactured from high quality elastomer compounds for durability and ride performance
- Assembled with proper precompression for ultimate in performance and feel
WABCO – Air Suspension Compressor (Part No.L7015847429WAB)
from
$1052.92
WABCO has developed a modular concept for rear-axle and four corner air suspensions, utilizing a family of 12-volt maintenance-free compressors with integrated air dryers. Our compressor portfolio consists of high, medium and low power compressors, with a number of application specific variants. This product line has been developed for all types of air suspensions; load levelling, 2-corner and 4-corner air suspension applications. We have executed a wide variety of product variations, anywhere from simple compressors with air dryer to high level integration mechatronics which can include ECU controls, pneumatic valves, motor relay, temperature and pressure sensors.
Product Features:
See More
Product Features:
- OE Fit every time
- Engineered and Assembled in the USA
- Costs a Fraction of the Dealer Price – WABCO COMPRESSOR SERVICE BULLETIN
Suncore – Air Compressor (Part No.340A-20)
from
$329.99
Air Compressor
Suncore – SuspAirCmp (Part No.299A-20)
from
$359.99
SuspAirCmp
Rein – Suspension Bump Stop Set (Part No.AVX0300P)
from
$29.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
- Matches Original Equipment design specifications
- Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
- Manufactured to strict engineering standards/specifications in materials and tolerances
Popular 2011 Audi A6 Suspension Parts Categories
2011 Audi A6 Suspension Parts
You count on your 2011 Audi A6 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 58 Suspension Parts ranging in price from $1.29 to $1,485.35, you’re sure to find everything you need for your 2011 Audi A6.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 18 different brands like Moog, Carquest Premium, and KYB. 2011 Audi A6 Suspension Parts start as low as $1.29!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 62 extensive product reviews on 2011 Audi A6 Suspension Parts.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2011 Audi A6 below to get started!
Top-Rated Suspension Parts Brands For Your 2011 Audi A6
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Audi A6 running right for years to come. In our inventory you’ll find brands like Moog, Carquest Premium, KYB, and even more.
Popular Monroe Suspension Parts
You’ll find popular Monroe brand products across Shocks and Struts. All are waiting to get your 2011 Audi A6 back on the road. Some of the top-rated Monroe products in these categories are:
FAQs for 2011 Audi A6 Suspension Parts
What are the most purchased Suspension Parts for the 2011 Audi A6?
Out of 58 Suspension Parts for the 2011 Audi A6, the most popular in our inventory are:
