2010 Volkswagen Jetta Body Parts

Essential Body Parts for 2010 Volkswagen Jettas

StrongArm – Trunk Lift Support: 11.72" Ext Length, 2.5" Travel, 160 Lbs of Force, 1 Pk (Part No.E6430)

Trunk Lift Support: 11.72" Ext Length, 2.5" Travel, 160 Lbs of Force, 1 Pk

from

$37.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
  • Non-Stick Back-Up Ring
  • Hardened Nitride Plated Steel Shaft
  • Engineered In USA To OE Quality Standards For Performance And Durability
  • IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
  • Easy To Install In Just Minutes. No Special Tools Required.
  • Exact Fit Original Equipment Design Guarantees Correct Fit And Function
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

Original Equipment – Power Window Regulator (Part No.O3040664152OEA)

Power Window Regulator

from

$222.80
Without Electric Motor The Original Equipment brand Window Regulator is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OEM-Quality and Direct Fit replacement
  • OEM factory connections and fittings
  • Original Equipment Manufacturer
See More

APA/URO Parts – Window Switch (Part No.O3060161616APA)

Window Switch

from

$60.44
Window Switch

KAI – Bumper Cover Molding (Part No.VW1046105)

Bumper Cover Molding

from

$5.99
New Standard Replacement Driver Side Front Bumper Cover Molding, Black, Without Headlight Washers

Product Features:
  • Black, Without Headlight Washers, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Vemo – Fuel Filler Door Swi (Part No.P3046425034VMO)

Fuel Filler Door Swi

from

$40.81
Fuel Filler Door Swi

KAI – Hood Hinge (Part No.VW1236113)

Hood Hinge

from

$13.99
New Standard Replacement Passenger Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – New Standard Replacement Grille, Black With Chrome Molding (Part No.VW1200165)

New Standard Replacement Grille, Black With Chrome Molding

from

$145.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, for Sedan Models, Excludes GLI, Black With Chrome Molding, Without Collision Warning. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • For Sedan Models, Excludes GLI, Black With Chrome Molding, Without Collision Warning, Made Of Poly(Acrylic Styrene Acrylonitrile)
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Aftermarket – Trunk Latch (Part No.O2059656199OEA)

Trunk Latch

from

$70.89
Trunk Latch

KAI – Spoiler (Part No.VW1093109)

Spoiler

from

$149.99
New Standard Replacement Bumper Spoiler, Front, Smooth Paint To Match

Product Features:
  • Front, Smooth Paint To Match, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bumper Guide (Part No.VW1043102)

Bumper Guide

from

$11.99
New Standard Replacement Passenger Side Front Bumper Inner Locating Guide

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Door Mirror Switch (Part No.SAA1559)

Door Mirror Switch

from

$61.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Pentosin – CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis (Part No.3J100337733PEN)

CHF11S Hi-Perf Power Steering Fluid for European Autos - Approved for Audis

from

$33.60
CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis

Rein – Suspension Bump Stop (Part No.AVZ0152)

Suspension Bump Stop

from

$26.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
  • Matches Original Equipment design specifications
  • Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

KAI – New Standard Replacement Passenger Side Bumper Grille Molding, Chrome, Over Fog Light Cover (Part No.VW1213100)

New Standard Replacement Passenger Side Bumper Grille Molding, Chrome, Over Fog Light Cover

from

$9.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Bumper Grille Molding, Chrome, Over Fog Light Cover. It is Designed to Replace Your Existing Bumper Cover Grille Molding. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Chrome, Over Fog Light Cover, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Liftgate Lock Actuator – Integrated (Part No.931-718)

Liftgate Lock Actuator - Integrated

from

$194.99
This liftgate lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models..

Product Features:
  • Reliable replacement – this liftgate lock actuator has undergone extensive quality and safety performance testing.
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone try-on and cycle testing to ensure a quality fit and long service life
See More

Dorman – Help – Interior Door Handle Front/Rear Right Bezel Black (Part No.82906)

Interior Door Handle Front/Rear Right Bezel Black

from

$18.99
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Mirror Assembly: Driver Side, Power Adjustment, Heated, W/ Turn Signal, 1 Pack (Part No.955-2379)

Mirror Assembly: Driver Side, Power Adjustment, Heated, W/ Turn Signal, 1 Pack

from

$187.99
This door mirror was engineered to look, fit and function like the original mirror assembly for your vehicle’s specific year, make and model. It includes the same mirror glass, housing, bracket and technology as the part that came on the vehicle.

Product Features:
  • Perfect replacement – reverse engineered to look, fit and function exactly like the original door mirror on your vehicle’s specific year, make and model
  • Complete assembly – includes same mirror glass, housing, bracket and technology as the original part that came on the vehicle
  • Cost-effective and reliable – functions similarly to the original part but is much less expensive than getting a replacement from the dealership or original manufacturer
  • Easy installation – no special tools or equipment is necessary for installing this new part
See More

Vaico – Trim Fastener, Black (Part No.O6072462067VCO)

Trim Fastener, Black

from

$2.24
Trim Fastener, Black

KAI – Fender Liner (Part No.VW1248133)

Fender Liner

from

$35.99
New Standard Replacement Driver Side Fender Liner, Front Section, Wagon With 5 Speed Transmission

Product Features:
  • Front Section, Wagon With 5 Speed Transmission, Made Of Polyethylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – New Standard Replacement Grille Molding Kit, 8-Piece Set (Part No.VW1211100)

New Standard Replacement Grille Molding Kit, 8-Piece Set

from

$64.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille Molding Kit, 8-Piece Set. It is Designed to Replace Your Existing Grille Molding Kit. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • 8-Piece Set, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bumper Guide (Part No.VW1043103)

Bumper Guide

from

$9.99
New Standard Replacement Passenger Side Front Bumper Outer Locating Guide

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Splash Shield (Part No.VW1251107)

Fender Splash Shield

from

$13.99
New Standard Replacement Passenger Side Front Splash Shield, Plastic Liner, All

Product Features:
  • Plastic Liner, All, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Integrated Door Lock Actuator (Part No.931-162)

Integrated Door Lock Actuator

from

$248.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Dorman – Help – Exterior Door Handle Rear Right/Left Texture Black (Part No.82966)

Exterior Door Handle Rear Right/Left Texture Black

from

$42.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Audi, VW Hood Insulation Retainer (Part No.963-639D)

Audi, VW Hood Insulation Retainer

from

$4.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Covercraft – Custom Hood Protector (Part No.45951-01)

Custom Hood Protector

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:
  • Protects vehicle’s hood from bugs or rock chips
  • Low profile, aerodynamic design
  • Installs in less than 5 minutes, no tools required
  • Custom fit exactly to your vehicle
  • Leather grain vinyl
See More

Dorman – Door Lock Actuator – Non Integrated (Part No.746-511)

Door Lock Actuator - Non Integrated

from

$70.99
This fuel filler door lock actuator is designed to match the appearance and function of the original part on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel filler door lock actuator is made to match the fit and performance of the original part on specific vehicle applications.
  • Ideal solution – this actuator is a reliable replacement for an original part that has failed due to collision damage or fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Vemo – Central Lock Switch (Part No.O4030425049VMO)

Central Lock Switch

from

$21.71
Central Lock Switch

Upgrade your 2010 Volkswagen Jetta with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2010 Volkswagen Jetta, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Body Parts are key to keeping your Jetta functioning at its best. At Advance Auto Parts, we offer a wide selection of 89 Body Parts for the 2010 Volkswagen Jetta, designed to meet your needs without breaking the bank. From Bodies and Fender Part replacements to Vehicle Hoods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2010 Volkswagen Jetta at great prices. Our Body Parts inventory for this model ranges from just $2.24 to $582.99, with an average price of $73.95. Our 89 Body Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 2010 Volkswagen Jetta without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Volkswagen Jetta, we stock popular OEM and aftermarket Body Parts from top names like Dorman, and more. Dorman Body Parts start at just $2.79 and boast an impressive 4 stars average rating from customers. With 10 customer reviews and counting, our 2010 Volkswagen Jetta Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Volkswagen Jetta is always ready to roll. We’re committed to providing you with everything you need to keep your Jetta in top shape, all in one place. Start shopping confidently below for your 2010 Volkswagen Jetta!

Best-Selling Bodies and Fender Parts for 2010 Volkswagen Jettas

Enhance the driving experience in your Volkswagen with 14 quality Bodies and Fender Part components, starting at $7.29.

Rein – Suspension Bump Stop (Part No.AVZ0559)

Suspension Bump Stop

from

$7.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
  • Matches Original Equipment design specifications
  • Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
See More

KAI – Fender Splash Shield (Part No.VW1250109C)

Fender Splash Shield

from

$74.99
New CAPA Certified Standard Replacement Driver Side Fender Liner, Rear Section

Product Features:
  • Rear Section, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Splash Shield (Part No.VW1251108C)

Fender Splash Shield

from

$73.99
New CAPA Certified Standard Replacement Passenger Side Fender Liner, Rear Section

Product Features:
  • Rear Section, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Splash Shield (Part No.VW1251107)

Fender Splash Shield

from

$13.99
New Standard Replacement Passenger Side Front Splash Shield, Plastic Liner, All

Product Features:
  • Plastic Liner, All, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Splash Shield (Part No.VW1250108)

Fender Splash Shield

from

$12.99
New Standard Replacement Driver Side Front Splash Shield, Plastic Liner, With Auto And 5 Speed

Product Features:
  • Plastic Liner, With Auto And 5 Speed, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Le Bra – Front End Cover, Vinyl, Black (Part No.551245-01)

Front End Cover, Vinyl, Black

from

$157.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

Le Bra – Front End Cover (Part No.551068-01)

Front End Cover

from

$157.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

Covercraft – Custom Hood Protector (Part No.45955-01)

Custom Hood Protector

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:
  • Protects vehicle’s hood from bugs or rock chips
  • Low profile, aerodynamic design
  • Installs in less than 5 minutes, no tools required
  • Custom fit exactly to your vehicle
  • Leather grain vinyl
See More

Covercraft – Custom Hood Protector (Part No.45961-01)

Custom Hood Protector

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:
  • Protects vehicle’s hood from bugs or rock chips
  • Low profile, aerodynamic design
  • Installs in less than 5 minutes, no tools required
  • Custom fit exactly to your vehicle
  • Leather grain vinyl
See More

KAI – Fender Liner (Part No.VW1248134)

Fender Liner

from

$36.99
New Standard Replacement Driver Side Fender Liner, Front Section, Wagon With 6 Speed Transmission

Product Features:
  • Front Section, Wagon With 6 Speed Transmission, Made Of Polyethylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Liner (Part No.VW1249133)

Fender Liner

from

$35.99
New Standard Replacement Passenger Side Fender Liner, Front Section, Wagons With 5 Or 6 Speed Transmission

Product Features:
  • Front Section, Wagons With 5 Or 6 Speed Transmission, Made Of Polyethylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Liner (Part No.VW1248133)

Fender Liner

from

$35.99
New Standard Replacement Driver Side Fender Liner, Front Section, Wagon With 5 Speed Transmission

Product Features:
  • Front Section, Wagon With 5 Speed Transmission, Made Of Polyethylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Splash Shield (Part No.VW1250110)

Fender Splash Shield

from

$13.99
New Standard Replacement Driver Side Fender Liner/Splash Shield, With 6 Speed Transmission

Product Features:
  • With 6 Speed Transmission, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Rein – Suspension Bump Stop (Part No.AVZ0606)

Suspension Bump Stop

from

$7.29
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
  • Matches Original Equipment design specifications
  • Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

Most Popular 2010 Volkswagen Jetta Vehicle Hoods

Customize your Volkswagen with 13 Vehicle Hoods products like Lift Supports, Hood Hinges, and Hood Insulation Pads, all priced under $582.99.

Dorman – Audi, VW Hood Insulation Retainer (Part No.963-639D)

Audi, VW Hood Insulation Retainer

from

$4.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

StrongArm – Trunk Lift Support: 11.72" Ext Length, 2.5" Travel, 160 Lbs of Force, 1 Pk (Part No.E6430)

Trunk Lift Support: 11.72" Ext Length, 2.5" Travel, 160 Lbs of Force, 1 Pk

from

$37.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
  • Non-Stick Back-Up Ring
  • Hardened Nitride Plated Steel Shaft
  • Engineered In USA To OE Quality Standards For Performance And Durability
  • IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
  • Easy To Install In Just Minutes. No Special Tools Required.
  • Exact Fit Original Equipment Design Guarantees Correct Fit And Function
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

Dorman – Hood Insul Rtnr Head Dia 0.99 X 0.785 In Shank Lng 0.572 In Hole Dia 0.45 In (Part No.963-639)

Hood Insul Rtnr Head Dia 0.99 X 0.785 In Shank Lng 0.572 In Hole Dia 0.45 In

from

$4.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Atlas Lift – Lift Support (Part No.LS10463)

Lift Support

from

$24.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

Stabilus – Hood Strut (Part No.O2020184018STB)

Hood Strut

from

$34.36
Hood Strut

Atlas Lift – Lift Support (Part No.LS10008)

Lift Support

from

$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

KAI – Hood Panel (Part No.VW1230131V)

Hood Panel

from

$582.99
New Economy Replacement Hood Panel, All Generation 5 Sedans, Only 2009 Wagons

Product Features:
  • All Generation 5 Sedans, Only 2009 Wagons, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

StrongArm – Hood Lift Support: 30.65" Ext Length, 12.25" Travel, 70 Lbs of Force, 1 Pk (Part No.B6001)

Hood Lift Support: 30.65" Ext Length, 12.25" Travel, 70 Lbs of Force, 1 Pk

from

$34.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
See More

Autopart International Inc – Hatch Strut (Part No.O20702470000API)

Hatch Strut

from

$31.15
Hatch Strut

Autopart International Inc – Trunk Strut (Part No.O20642198856API)

Trunk Strut

from

$29.85
Trunk Strut

KAI – Hood Hinge (Part No.VW1236112)

Hood Hinge

from

$21.99
New Standard Replacement Driver Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Hood Pad Clip (Part No.O2041831899DOR)

Hood Pad Clip

from

$4.74
Hood Pad Clip

Dorman – Hood Insulation Retainer Clip (sold by each) (Part No.700-087)

Hood Insulation Retainer Clip (sold by each)

from

$2.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Top Picks for 2010 Volkswagen Jetta Vehicle Latches and Handles

Upgrade Volkswagen Jettas with top-quality Vehicle Latches and Handles parts, including 6 OEM and aftermarket selections for your 2010 model.

Original Equipment – Trunk Latch (Part No.O2059396301OEA)

Trunk Latch

from

$77.44
Trunk Latch

Original Equipment – Door Latch Assembly (Part No.O3027422977OEA)

Door Latch Assembly

from

$291.54
Door Latch Assembly

Dorman – Help – Interior Door Handle Front Left Chrome And Black (Part No.96579)

Interior Door Handle Front Left Chrome And Black

from

$94.99
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Exterior Door Handle Front Left Zinc (Part No.82967)

Exterior Door Handle Front Left Zinc

from

$88.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Exterior Door Handle Front/Rear Right;Rear Left Smooth Black (Part No.82972)

Exterior Door Handle Front/Rear Right;Rear Left Smooth Black

from

$80.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Interior Door Handle Front Right Chrome And Black (Part No.96580)

Interior Door Handle Front Right Chrome And Black

from

$72.99
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

In-Demand Vehicle Windows for 2010 Volkswagen Jettas

Select from 6 premium Vehicle Windows parts for your 2010 Volkswagen Jetta, with prices ranging from $71.71 to $166.67.

Dorman – Window Regulator: Power, 1 Pack (Part No.752-333)

Window Regulator: Power, 1 Pack

from

$118.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

Worldpac – WINDOW REGULATOR W/O (Part No.O3040721222DOR)

WINDOW REGULATOR W/O

from

$166.67
WINDOW REGULATOR W/O

Autopart International Inc – Window Regulator (Part No.O30402049739API)

Window Regulator

from

$143.49
Window Regulator

Autopart International Inc – Window Regulator (Part No.O30402027040API)

Window Regulator

from

$140.85
Window Regulator

Autopart International Inc – Window Regulator (Part No.O30401961839API)

Window Regulator

from

$82.50
Window Regulator

Autopart International Inc – Window Regulator (Part No.O30401933076API)

Window Regulator

from

$71.71
Window Regulator

Most Sold 2010 Volkswagen Jetta Vehicle Doors

Explore our best-selling Volkswagen parts for the 2010 Jetta among 7 OEM and aftermarket options starting from $2.24.

Vemo – Central Lock Switch (Part No.O4030425049VMO)

Central Lock Switch

from

$21.71
Central Lock Switch

Dorman – Door Lock Actuator – Integrated With Latch (Part No.931-503)

Door Lock Actuator - Integrated With Latch

from

$149.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Dorman – Integrated Door Lock Actuator (Part No.931-162)

Integrated Door Lock Actuator

from

$248.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Dorman – Door Lock Actuator – Integrated With Latch (Part No.931-502)

Door Lock Actuator - Integrated With Latch

from

$235.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Dorman – Integrated Door Lock Actuator (Part No.931-165)

Integrated Door Lock Actuator

from

$108.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Original Equipment – Central Lock Switch (Part No.O4030766731OEA)

Central Lock Switch

from

$77.87
Central Lock Switch

Vaico – Trim Fastener, Black (Part No.O6072462067VCO)

Trim Fastener, Black

from

$2.24
Trim Fastener, Black

Top-Rated Body Parts Brands For Your 2010 Volkswagen Jetta

Shop for the best-rated brands offering Body Parts and other products for your 2010 Volkswagen Jettas. Below you’ll find some of our best rated Body Parts from Dorman, and more. Body Parts from these brands that fit a 2010 Jetta start at just $2.79 and are rated as high as 4 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 2010 Volkswagen Jetta Body Parts

When it comes to maintaining or upgrading your 2010 Volkswagen Jetta, using quality Body Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Body Parts, specifically designed for the 2010 Volkswagen Jetta. With over 21 Dorman brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.79, with an average price of just $108.62. Plus, with over 1 customer reviews and an average rating of 4 stars, you can trust that our Dorman Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Audi, VW Hood Insulation Retainer
from
$4.29
This product is not rated

Audi, VW Hood Insulation Retainer

“”

Power Mirror Switch - Front Left
from
$61.99
This product is not rated

Power Mirror Switch – Front Left

“”

FAQs for 2010 Volkswagen Jetta Body Parts

Which Body Parts are best-sellers for 2010 Volkswagen Jettas?

Out of 89 Body Parts that fit 2010 Volkswagen Jettas, the following parts are the top sellers:

What’s the price range for 2010 Volkswagen Jetta Body Parts?

Body Part prices for the 2010 Volkswagen Jetta start at $2.24 and go up to $582.99 for the most premium parts.

What’s the average price of a Body Part for a 2010 Volkswagen Jetta?

The average price for Body Parts for the 2010 Volkswagen Jetta is $73.95. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Volkswagen Jetta model years?

Yes, we currently carry Body Parts for 44 model years of Volkswagen Jettas between 1980 and 2024. Body Parts are bought most frequently for the following model years: 2023, 2022, 2024, 2021, 2020, 2019, 2018, 2017, and 2016.

What are the cheapest Body Parts for my 2010 Volkswagen Jetta?

The cheapest 2010 Volkswagen Jetta Body Parts we carry in stock are:

What are the top-rated Body Parts that fit the 2010 Volkswagen Jetta?

Out of 10 reviews by customers, our 2010 Volkswagen Jetta Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 2010 Volkswagen Jetta and their top-rated products:

What types of Body Parts do you sell for my 2010 Volkswagen Jetta?

Can I get help with 2010 Volkswagen Jetta Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Body Parts and more.

What is your return policy for Volkswagen Jetta Body Parts?

Advance Auto Parts keeps returns simple. For new Volkswagen Jetta Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.