2010 Volkswagen Eos Engine Parts

Name: Cylinder Head Bolt Set
Brand: Ajusa
SKU: 81039300
Price: 33.99 USD

Below you will find various in-demand Volkswagen Engine Parts, components and accessories for your 2010 Eos. Advance Auto Parts has popular Eos parts like Valve Cover and Cylinder Heads, Camshafts, Engine Timing Parts and more. You’ll also find aftermarket and OEM Engine Parts for other Eos model years including 2007, 2008, 2009, 2011, 2012, 2013, 2014, 2015, 2016 and more. Select a category of 2010 Volkswagen Eos Engine Parts below and start saving instantly.

Popular 2010 Volkswagen Eos Engine Parts Categories

Engine Variable Timing Solenoids

Valve Cover Gaskets

Engine Timing Chain Kits

Turbochargers and Parts

Engine Mount and Torque Struts

Oil Pan Gaskets

Camshaft Position Sensors

Rear Main Seal Sets

Cylinder Head Bolt Sets

Turbocharger Boost Sensors

Crankshaft Position Sensors

Timing Covers

Harmonic Balancers

Cylinder Head Gasket Sets

Balance Shaft Kits

Engine Mounts

Timing Chain Guide Bolts

Oil Pans

Engine Oil Cooler Accessories

Engine Oil Dip Stick Tubes

Cylinder Head Gaskets

Oil Level Sensors

Crankshaft Seals

Turbocharger Oil Lines

Timing Belts

Oil Caps

Oil Cooler Line Connectors

Engine Oil Dipsticks

Intercoolers

Crankshaft Pulleys

Intercooler Connection Hoses

Turbocharger Diverter Valves

Turbocharger Cut-Off Valves

Timing Cover Seals

Rocker Arms

Balance Shaft Chain Tensioners

Timing Cover Plugs

Engine Variable Timing Oil Control Valves

Engine Valve Stem Seals

Camshafts

Engine Oil Separators

Camshaft Timing Adjuster Magnets

Turbocharger Intercooler Pipes

Lower Gasket Sets

Engine Oil Level Sensor Cover Kits

Turbocharger Coolant Lines

Oil Level Sender Gaskets

Fuel Pump Gaskets

Cylinder Head Bolt Washer Sets

Turbocharger Drain Gaskets

Balance Shaft Chain Guides

Engine Oil Cooler Line O-Rings

Engine Variable Timing Adjuster Magnet Seals

Engine Valve Locks

Fuel Tank Sending Unit Gaskets

Cylinder Heads

Turbocharger Service Kits

Cylinder Head Studs

Engine Oil Separator O-Rings

Intercooler O-Ring

Turbocharger Oil Supply Line Banjo Bolt

Essential Engine Parts for 2010 Volkswagen Eos

from

$33.99

AJUSA is a leading global manufacturer of automotive gaskets, head bolt sets, seals and hydraulic lifters for European and Asian vehicles. AJUSA prides itself in offering the latest applications with quality that is equal to or exceeds that of the OE. Headquartered in Spain, AJUSA was established in 1972 as a gasket manufacturer, is an OE supplier, is ISO 9001 and ISO/TS 16949 certified, and ISO 14001 certified as a company that protects and respects the environment.

Product Features:

AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
All kits are application specific.
Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
Each set comes with special assembly lube to ensure proper torque when tightening.
All kits are boxed and shrink wrapped.

from

$77.79

Intercooler Pipe

from

$90.13

Camshaft Adjuster Ma

from

$117.99

This replacement VVT oil control valve is a direct replacement for a worn or leaking original equipment valve. Made of quality materials for durability, this part has been tested to ensure a proper fit.

Product Features:

Ideal replacement – this VVT oil control valve matches the fit and function of the original equipment part to restore proper operation to the variable valve timing system.
Durable construction – this VVT oil control valve is made of quality materials to ensure reliable performance and a long service life.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$9.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$157.99

This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:

Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
Durable construction – this part is made from quality materials to ensure a long service life.
Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

from

$18.79

This engine oil level sensor cover is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine oil level sensor cover is designed to match the fit and function of the original part on specified vehicles.
Ideal solution – this cover is a reliable replacement for an original part that is missing or damaged.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.36

Timing Guide Rail

from

$119.99

This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance..

Product Features:

Direct replacement – this turbocharger oil line matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this oil line is a reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$185.99

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
Durable construction – stringent specifications and careful construction help ensure longevity.
Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$1315.99

Turbocharger seals or bearings gone bad? This replacement turbocharger is designed to replace the original equipment on specific vehicle years, makes and models to reliably restore engine performance.

Product Features:

Direct replacement – this turbocharger is built to match the performance of original equipment for specific vehicles
Complete kit – comes with turbocharger and gasket kit for added convenience
Thoroughly tested – part has undergone fit, performance and corrosion testing to ensure longevity and reliability
Repair tip – also replace oil and coolant inlet and drain tubes (not included) to ensure turbo function

from

$14.43

Intercooler O-Ring

from

$116.60

Turbo Diverter Valve

from

$177.56

Corteco Harmonic Balancers feature a stress-resistant rubber bond that withstands the damaging effects of heat, salt, ozone and general wear and tear. Corteco Harmonic Balancers undergo detailed dimensional checks of the full assembly and critical components to ensure the strength and integrity of the part.

Product Features:

OE Quality
Includes woodruff key, bolts, and washers for a complete repair (where applicable)
Direct replacement to ensure proper fit

from

$1.78

Water Temperature Sensor O-Ring

from

$2.37

Freeze Plug

from

$268.25

Balance Shaft Chain

from

$114.31

Turbo Diverter Valve

from

$16.54

Rocker Arm

from

$41.49

This engine oil dipstick tube is designed to match the fit and function of the original tube on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this engine oil dipstick tube is designed to match the fit and function of the original tube on specified vehicles.
Restores functionality – reliable replacement for an original part that is missing, bent or broken
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$23.49

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$109.99

Rein Automotive OE quality turbo cooling hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the quick connect fittings.

Product Features:

Reduce installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants

from

$13.51

Intermediate Shaft S

from

$125.99

This turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles
Ideal solution – this coolant line is a reliable replacement for a leaking or failed original line
Durable construction – made from quality components to ensure reliable performance and long service life
Quality assured – backed by a team of product engineers based in the United States

from

$6.67

FUEL PUMP TANK SEAL

from

$15.73

Balance Shaft Chain

from

$3.14

Valve Keeper

from

$3.14

Valve Keeper

Upgrade your 2010 Volkswagen Eos with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2010 Volkswagen Eos, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Engine Parts are key to keeping your Eos functioning at its best. At Advance Auto Parts, we offer a wide selection of 142 Engine Parts for the 2010 Volkswagen Eos, designed to meet your needs without breaking the bank. From Valve Cover and Cylinder Head replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2010 Volkswagen Eos at great prices. Our Engine Parts inventory for this model ranges from just $1.78 to $1,406.00, with an average price of $111.33. Our 142 Engine Parts in stock come from 40 trusted brands, so you’re sure to find the right part for your 2010 Volkswagen Eos without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Volkswagen Eos, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO Anchor, and more. FELPRO Engine Parts start at just $6.79 and boast an impressive 5 stars average rating from customers. With 60 customer reviews and counting, our 2010 Volkswagen Eos Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Volkswagen Eos is always ready to roll. We’re committed to providing you with everything you need to keep your Eos in top shape, all in one place. Start shopping confidently below for your 2010 Volkswagen Eos!

Best-Selling Valve Cover and Cylinder Heads for 2010 Volkswagen Eos

Enhance the driving experience in your Volkswagen with 18 quality Valve Cover and Cylinder Head components, starting at $2.18.

show more show less

from

$42.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$20.75

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$121.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$3.14

Valve Keeper

from

$37.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$61.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$771.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$771.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$225.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$75.83

Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

Produced from spring steel for long-lasting flexibility of beads
Thermal stability up to 600F
Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
Tightening instructions provided with each gasket for perfect results

from

$66.75

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$39.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$33.99

AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
All kits are application specific.
Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
Each set comes with special assembly lube to ensure proper torque when tightening.
All kits are boxed and shrink wrapped.

from

$23.99

Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$16.54

Rocker Arm

from

$4.23

Cylinder Head Bolt

from

$3.14

Valve Keeper

from

$2.18

CYLINDER HEAD STUD

Most Popular 2010 Volkswagen Eos Camshafts

Customize your Volkswagen with 11 Camshafts products like Camshaft Position Sensors, Camshaft Seals, and Camshaft Plugs, all priced under $1,300.38.

show more show less

from

$70.99

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

OE-matching metallurgy and low-friction diamond-like coating (DLC) prevent premature wear, which can lead to catastrophic failure of fuel pump, camshaft, and/or cylinder head
Recommended replacement on all vehicles over 70k miles.
Extensively tested to OE specifications to ensure superior performance and long service life
All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

from

$41.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$28.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$32.99

The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output

from

$58.98

CAMSHAFT POSITION SE

from

$33.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$90.13

Camshaft Adjuster Ma

from

$1300.38

CAMSHAFT

from

$102.36

CAMSHAFT POSITION SE

from

$11.58

Camshaft Follower

from

$7.13

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
Various designs specifically adapted to the area of application ensure excellent functionality and performance
High-performance FPM guarantees optimum leak tightness

Top Picks for 2010 Volkswagen Eos Engine Timing Parts

Upgrade Volkswagen Eos with top-quality Engine Timing Parts parts, including 22 OEM and aftermarket selections for your 2010 model.

show more show less

from

$16.49

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round, reinforced tooth w/ grooved tip profile; designed to fit the timing sprockets precisely

from

$6.68

Camshaft Adjuster Ma

from

$69.99

Rein Automotive OE quality timing covers are fabricated from premium metal and/or plastic materials and manufactured to be direct-fit replacements. Rein timing covers are designed and manufactured to tight tolerances to ensure proper sealing against engine surfaces.

Product Features:

Manufactured to strict engineering standards and specifications in materials and tolerances.
Made with premium materials that is resistant to corrosion to ensure a long service life.
Includes premium gasket and/or silicone sealant.

from

$129.99

Manufactured to strict engineering standards and specifications in materials and tolerances.
Made with premium materials that is resistant to corrosion to ensure a long service life.
Includes premium gasket and/or silicone sealant.

from

$117.99

Ideal replacement – this VVT oil control valve matches the fit and function of the original equipment part to restore proper operation to the variable valve timing system.
Durable construction – this VVT oil control valve is made of quality materials to ensure reliable performance and a long service life.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$1174.99

Timing Chain Select Plus

from

$283.99

On certain Audi and Volkswagen vehicles equipped 2.0 liter engines, the mesh screen oil filter in the original equipment camshaft bridge cover tends to fail from the pressure of pulsations generated by the oil circuit. The pulsations can clog the filter with debris or cause the junction between the mesh screen and its plastic housing to fail and push the separated filter components into the engine lubrication system. Either condition starves the engine for oil, reduces engine power and can cause stalling, irregular idle, and a check engine light. The dealer only offers a replacement cover with the same failure-prone integrated oil filter or recommends removing the screen in the failed cover entirely. This Dorman OE FIX camshaft bridge cover features an upgraded one-piece stainless steel housing with a mesh screen laser-welded into place instead of the factory design’s plastic housing that holds the screen in place with a brass ring that can loosen and fall off. The screen mesh in our filter also has 3X the tensile strength and larger openings than the original equipment filter – small enough to capture damaging debris, while mitigating the harmful effects of oil pressure pulsations. This improved cover design is engineered to provide the protection specified Audi and Volkswagen engines need for peak performance and eliminate worries about costly damage from unfiltered contaminants and a factory-designed filter prone to breakage during normal engine operations..

Product Features:

Better fix – this engine timing cover features a redesigned oil filter that resists clogging and breakage to better protect the engine from harmful oil pulsations and oil contaminants.
Upgraded materials – the integrated filter is a one-piece stainless steel housing with the mesh screen laser-welded into place, rather than the factory’s multi-piece plastic design
Fully tested – in hot oil immersion tests simulating extreme engine temperatures, the mesh screen in the upgraded filter tested to 3X the tensile strength of the original screen
Ensures performance – engineered to help ensure optimal engine performance and component protection while reducing the potential for future failures

from

$268.25

Balance Shaft Chain

from

$167.99

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards..

Product Features:

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover.
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life.
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$162.99

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover.
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life.
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$141.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$126.99

from

$107.69

Oil Pump Chain

from

$76.60

Balance Shaft Chain

from

$30.12

Timing Chain Guide R

from

$15.73

Balance Shaft Chain

from

$10.19

Crankshaft Seal

from

$6.90

Timing Guide Rail

from

$6.67

Timing Cover Plug

from

$4.76

Timing Chain Rail Bo

from

$3.81

Timing Chain Rail Bo

from

$2.99

Rein OE quality water pump mounting bolts are manufactured with premium materials and are direct replacements for the OE. Set includes all necessary bolts to complete a specific repair.

Product Features:

Ensures proper tightening and retention of the water pump
Designed as direct-fit replacements to ensure trouble-free proper installations
Manufactured to strict engineering standards and specifications in materials and tolerances

In-Demand Engine Gaskets and Seals for 2010 Volkswagen Eos

Select from 15 premium Engine Gaskets and Seals parts for your 2010 Volkswagen Eos, with prices ranging from $6.49 to $148.99.

show more show less

from

$18.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$21.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$30.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$6.49

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$9.11

Oil Level Sender O-R

from

$54.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$41.15

Oil Pan Gasket

from

$148.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$107.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$39.22

Gasket Maker

from

$34.99

Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Fiber construction
Compliant to a wide range of surface conditions

from

$23.99

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds original equipment specifications.
Zero engine leakage for late model vehicles.

from

$13.51

Intermediate Shaft S

from

$6.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$6.67

FUEL PUMP TANK SEAL

Most Sold 2010 Volkswagen Eos Engine Mounts

Explore our best-selling Volkswagen parts for the 2010 Eos among 13 OEM and aftermarket options starting from $23.58.

show more show less

from

$112.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 06-15; VW 98-21;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1998-2021
Weight approx: 5 Lbs
HYDRAULIC

from

$59.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 04-18; SEAT 08-13; VW 05-21;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2004-2021
Weight approx: 1 Lbs
ENGINE CRADLE
BOLTS THROUGH TORQUE STRUT REAR END
BOLT HOLE: NO THREADS

from

$34.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 06-13; SEAT 08-19; VW 05-18;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2005-2019
Weight approx: 1 Lbs
ENGINE CRADLE
HEIGHT: 1.42 INCH / 36 MM
BOLTS THROUGH TORQUE STRUT REAR END
BOLT HOLE: THREADED

from

$30.99

MotorMt

from

$160.99

The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline’s torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.

Product Features:

Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

from

$156.58

CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce engine vibration and noise Vibration Control Brochure

from

$93.92

Engine Mount

from

$40.99

Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Install guide included providing detailed instructions on how to install your new purchase .

from

$40.99

Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.

from

$35.06

Engine Mount

from

$30.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

from

$29.99

MotorMt

from

$23.58

Engine Mount

Top-Rated Engine Parts Brands For Your 2010 Volkswagen Eos

Shop for the best-rated brands offering Engine Parts and other products for your 2010 Volkswagen Eos. Below you’ll find some of our best rated Engine Parts from FELPRO and Anchor, and more. Engine Parts from these brands that fit a 2010 Eos start at just $6.79 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2010 Volkswagen Eos Engine Parts

When it comes to maintaining or upgrading your 2010 Volkswagen Eos, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2010 Volkswagen Eos. With over 14 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.79, with an average price of just $39.23. Plus, with over 5 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$21.49

This product is not rated

Exhaust Pipe Flange Gasket

“”

from
$21.99

This product is not rated

VALVE COVER GASKET SET

“”

from
$41.49

This product is not rated

Engine Crankshaft Seal Kit

“”

Popular Anchor 2010 Volkswagen Eos Engine Parts

Anchor auto parts is one of the highest quality Engine Part brands in the market. Any 2010 Volkswagen Eos owner should feel confident when installing genuine Anchor parts in their vehicle. To ensure the best fit and performance for your 2010 Eos, Advance Auto Parts carries a full inventory of 3 Anchor Engine Parts. Plus you will be keeping your Volkswagen in peak condition while saving money because prices on these Anchor Engine Parts range from $34.99 to $112.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from
$59.99

This product is not rated

Engine Mount: Rear, 1 Piece

“”

from
$34.99

This product is not rated

Engine Mount: Rear, 1 Piece

“”

from
$112.99

(1)

Engine Mount: Right, 1 Piece

“Part is made in China. It isn’t even a direct fit. The mount has to be ground down to even fit in place. Do not recommend.”

FAQs for 2010 Volkswagen Eos Engine Parts

Which Engine Parts are best-sellers for 2010 Volkswagen Eos?

Out of 142 Engine Parts that fit 2010 Volkswagen Eos, the following parts are the top sellers:

Camshaft Sensor (12351332) – $28.99
Fuel Pump Camshaft Follower (10661357) – $70.99
VALVE COVER GASKET SET (10587065) – $21.99

What’s the price range for 2010 Volkswagen Eos Engine Parts?

Engine Part prices for the 2010 Volkswagen Eos start at $1.78 and go up to $1,406.00 for the most premium parts.

What’s the average price of a Engine Part for a 2010 Volkswagen Eos?

The average price for Engine Parts for the 2010 Volkswagen Eos is $111.33. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Volkswagen Eos model years?

Yes, we currently carry Engine Parts for 9 model years of Volkswagen Eos between 2007 and 2016. Engine Parts are bought most frequently for the following model years: 2016, 2015, 2014, 2013, 2012, 2011, 2009, 2008, and 2007.

What are the cheapest Engine Parts for my 2010 Volkswagen Eos?

The cheapest 2010 Volkswagen Eos Engine Parts we carry in stock are:

Water Temperature Sensor O-Ring (10747339) – $1.78
CYLINDER HEAD STUD (50243753) – $2.18
Freeze Plug (10727581) – $2.37
Hardware Bolt (50151283) – $2.99
Valve Keeper (11999138) – $3.14

What are the top-rated Engine Parts that fit the 2010 Volkswagen Eos?

Out of 60 reviews by customers, our 2010 Volkswagen Eos Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2010 Volkswagen Eos and their top-rated products:

Engine Gaskets and Seals
- OIL PAN GASKET SET (10081879) – $18.99
Valve Cover and Cylinder Heads
- OIL PAN GASKET SET (10081879) – $18.99

What types of Engine Parts do you sell for my 2010 Volkswagen Eos?

As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 2010 Volkswagen Eos:

Can I get help with 2010 Volkswagen Eos Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Engine Parts and more.

What is your return policy for Volkswagen Eos Engine Parts?

Advance Auto Parts keeps returns simple. For new Volkswagen Eos Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2010 Volkswagen Eos Engine Parts

Ajusa – Cylinder Head Bolt Set (Part No.81039300)

Dansk – Intercooler Pipe (Part No.B4043849083DSK)

Pierburg – Camshaft Adjuster Ma (Part No.A50892524468APG)

Dorman – Variable Timing Oil Control Valve (Part No.916-964)

Victor Reinz – Engine Oil Cooler Gasket (Part No.71-17547-00)

Dorman – Variable Valve Timing Solenoid (Part No.917-271)

Dorman – Engine Oil Pan Sensor Cover (Part No.264-777)

Febi – Timing Guide Rail (Part No.A5040160242FEB)

Dorman – Turbocharger Oil Return Line (Part No.667-581)

Dorman – Harmonic Balancer Assembly (Part No.594-335)

Dorman – Turbocharger And Gasket Kit (Part No.667-223)

Burgaflex – Intercooler O-Ring (Part No.B40421154724BUR)

Pierburg – Turbo Diverter Valve (Part No.B40052930621APG)

Corteco – Engine Harmonic Balancer (Part No.A2210750349CFW)

Febi – Water Temperature Sensor O-Ring (Part No.C606032192FEB)

Febi – Freeze Plug (Part No.A1030322873FEB)

Febi – Balance Shaft Chain (Part No.A5104851734FEB)

Pierburg – Turbo Diverter Valve (Part No.B4005329930APG)

INA – Rocker Arm (Part No.A4040420929INA)

Dorman – Help – Engine Oil Dipstick Tube: Direct Replacement, Steel (Part No.917-475)

Victor Reinz – Engine Valve Stem Oil Seal Set (Part No.12-31306-05)

Rein – Turbo Intercooler Hose (Part No.TCH0317)

Corteco – Intermediate Shaft S (Part No.A8085384851CFW)

Dorman – Turbocharger Return Hose (Part No.667-608)

MTC – FUEL PUMP TANK SEAL (Part No.E3004321573MTC)

Vaico – Balance Shaft Chain (Part No.A5103413275VCO)

TRW – Valve Keeper (Part No.A4070774061TRW)

KS – Valve Keeper (Part No.A407084736KS)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72310)

TRW – TRW Intake Valve (Part No.A4060181142TRW)

Felpro – Cylinder Head Gasket Set (Part No.HS 26455 PT)

TRW – Valve Keeper (Part No.A4070774061TRW)

Felpro – CYLINDER HEAD BOLT WASHER SET (Part No.ES 71336)

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26455 PT)

Spartan – Engine Cylinder Head; VW 2.0 CBFA Head (Part No.2904A)

Spartan – Engine Cylinder Head; VW 2.0 CCTA Head (Part No.2904)

Victor Reinz – Engine Cylinder Head Gasket Set (Part No.02-37475-01)

Elring – Cylinder Head Gasket Set (Part No.A81001099194ELR)

TRW – TRW Exhaust Valve (Part No.A4050169647TRW)

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-37475-00)

Ajusa – Cylinder Head Bolt Set (Part No.81039300)

Victor Reinz – Engine Cylinder Head Bolt Set (Part No.14-32276-01)

INA – Rocker Arm (Part No.A4040420929INA)

Febi – Cylinder Head Bolt (Part No.A3030181047FEB)

KS – Valve Keeper (Part No.A407084736KS)

Worldpac – CYLINDER HEAD STUD (Part No.A30401155674RIN)

Tech Smart – Fuel Pump Camshaft Follower (Part No.T48001)

National – Shaft Repair Sleeve (Part No.99147)

Carquest Premium – Camshaft Sensor (Part No.CSC1138)

NTK – Camshaft Position Sensor (Part No.EC0021)

Original Equipment – CAMSHAFT POSITION SE (Part No.A4015437890OEA)

National – Shaft Repair Sleeve (Part No.99196)

Pierburg – Camshaft Adjuster Ma (Part No.A50892524468APG)

Worldpac – CAMSHAFT (Part No.A4000455266KS)

Worldpac – CAMSHAFT POSITION SE (Part No.A4015437890BRM)

INA – Camshaft Follower (Part No.A4010314568INA)

Elring – Elring Cam Plug (Part No.A8031401198ELR)

Dayco – Premium Timing Belt, 10.63 Inch With 54 Round Tooth, With Grooved Tip (Part No.95348)

Elring – Camshaft Adjuster Ma (Part No.A80131618081ELR)

Rein – Timing Cover (Part No.TCV0160)

Rein – Timing Cover (Part No.TCV0159)

Dorman – Variable Timing Oil Control Valve (Part No.916-964)

Rein – Timing Chain Select Plus (Part No.CKP0239)

Dorman – Camshaft Bridge Cover (Part No.635-050)

Febi – Balance Shaft Chain (Part No.A5104851734FEB)

Dorman – Timing Cover Kit (Part No.635-134)

Dorman – Timing Cover Kit (Part No.635-699)

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVC1116)

Carquest Premium – Engine Variable Valve Timing (VVT) Oil Control Valve (Part No.VVA1337)

Febi – Oil Pump Chain (Part No.A6030433049FEB)

Febi – Balance Shaft Chain (Part No.A5026413890FEB)

BBR Automotive – Timing Chain Guide R (Part No.A5040413268BBR)

Vaico – Balance Shaft Chain (Part No.A5103413275VCO)

Corteco – Crankshaft Seal (Part No.A8060414158CFW)

Febi – Timing Guide Rail (Part No.A5040413266FEB)

Elring – Timing Cover Plug (Part No.A80473078513ELR)

Original Equipment – Timing Chain Rail Bo (Part No.A5042934978OEA)

Original Equipment – Timing Chain Rail Bo (Part No.A5042934975OEA)

Rein – Hardware Bolt (Part No.HWB0080)