Name: Green Stripe Heavy-Duty Vulco-Flex Coolant Hose
Brand: Gates
SKU: 26511
Price: 50.99 USD

from

$50.99

Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:

Engineered to resist electrochemical degradation, the leading cause of hose failure
The steel wire spiral allows them to adopt multiple shapes without bending or crushing
EPDM tube and neoprene lid for extended lifespan
The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
Resistant to heat, oil and ozone
Compliant with SAE 20R5 Type EC Class D-2 specifications
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transfer applications
Caution: Do not use for fuel or oil transfer applications.

from

$53.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$190.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, the main cause of casing failure
Pre-formed for a good fit and to ensure perfectly sealed connections
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
Warning: Do not use for fuel or oil transfer applications

from

$21.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Materials specifically designed to resist collapse under vacuum
Designed to resist electrochemical degradation, the main cause of casing failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transport applications.

from

$36.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses

from

$1.29

Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

Meets SAE J20R4, Class D-2 requirements
Features a high strength knitted reinforcement and synthetic EPDM rubber construction
Resistant to standard coolants, ozone and other detrimental environmental elements
Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Priced and sold by inch. See store for details.

from

$108.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. This pulley conforms to original equipment material, tolerances, and specifications. This part fits Heavy Duty truck applications including 2008-10 UD Nissan 1800,2000,2300,2600,3300 with MD-230 Diesel and comes pre-assembled with a new installation bolt and dust shield. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$21.49

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$57.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$91.99

Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

The patented material offers optimal performance at prolonged extreme operating temperatures.
The construction resists cracking and wear, even at extreme temperatures.
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
A problem-solving tool designed for the most challenging applications
It consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$33.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$24.79

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

The special construction of the belt eliminates belt noise, reduces tension loss, and solves problems in drive applications.
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all original equipment manufacturer specifications
Replacing the tensioner is recommended (if the vehicle is equipped with one).
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$36.49

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$17.79

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OEM requirements

from

$105.99

Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at prolonged extreme operating temperatures
Construction resistant to cracking and wear, even at extreme temperatures
A special compound offers unparalleled flexibility, stability, load capacity, and belt lifespan.
Troubleshooting designed for the most challenging applications
It consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet money and reduce downtime
It is recommended to replace the tensioner (if equipped).

from

$57.99

Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

The patented material offers optimal performance at prolonged extreme operating temperatures.
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$119.99

Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

The patented material provides maximum performance at extreme and prolonged operating temperatures.
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Troubleshooting designed for the most challenging applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$44.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High modulus, high strength tensile cord
Oil and heat-resistant construction throughout
Meets SAE J636b and SAE J637 specifications
Meets RMA oil and heat resistant standards and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand joined V-belts

from

$47.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High modulus and high strength traction cord
Oil and heat-resistant construction throughout
Meets SAE J636b and SAE J637 specifications
Meets RMA oil and heat resistant standards and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand joined V-belts

from

$45.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded grooves reduce bending stress, especially on small diameter pulleys, while also dissipating heat.
High modulus, high strength tensile cord
Oil and heat resistant construction
Meets SAE J636b and SAE J637 specifications
Meets RMA oil and heat resistant standards and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand V-belts

from

$19.79

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$37.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High modulus and high strength traction cord
Oil and heat resistant construction
Meets SAE J636b and SAE J637 specifications
It meets RMA standards for oil and heat resistance and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand V-belts

from

$52.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stresses, especially on small diameter pulleys, while also dissipating heat.
High modulus, high strength tensile cord
Oil and heat resistant construction
Meets SAE J636b and SAE J637 specifications
Compliant with RMA standards for oil and heat resistance and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand joined V-belts

from

$46.99

Designed for the toughest applications, Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

The patented material provides maximum performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
The special compound provides unprecedented flexibility, stability, load-bearing capacity, and belt life.
The unique notch design under the cord offers greater flexibility for smaller diameter pulleys
Problem solver for failing disks
Designed to save your fleet money and reduce downtime
Compliant with RMA standards for oil and heat resistance and static conductivity requirements

from

$31.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Ground to ensure precise dimensional control of the top width and side wall for proper fit to the pulley.
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
It resists oil, heat, ozone, weather, and decay to improve belt life.
Meets or exceeds SAE J636C specifications

from

$33.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded grooves reduce bending stress, especially on small diameter pulleys, while also dissipating heat.
High modulus, high strength tensile cord
Oil and heat resistant construction
Compliant with SAE J636b and SAE J637 specifications
Meets RMA oil and heat resistant standards and static conductivity requirements
NOTE: Some sizes are available as Gates PowerBand V-belts.

from

$23.49

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$34.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stresses, especially on small diameter pulleys, while also dissipating heat.
High modulus and high strength traction cord
Oil and heat resistant construction
Meets SAE J636b and SAE J637 specifications
It meets RMA standards for oil and heat resistance and static conductivity requirements
NOTE: Some sizes are available as Gates PowerBand V-belts.

2010 UD 3300 Belts and Hoses

Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26511)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22.50" Long, 2.25" Diameter (Part No.E70921)

Gates – Premium Molded Coolant Hose (Part No.24010)

Gates – Premium Molded Coolant Hose (Part No.20782)

Dayco – Flex Radiator Hoses; Neoprene, HD, 18.75 Inch Long, 1.75 Inch Inner Dia. (Part No.82008GL)

Dayco – Straight Coolant Hose (Standard) (Sold by inch) (Part No.76213)

Litens – Idler Pulley: Direct Fit, Steel, 80mm Diameter, With Hardware (Part No.900594A)

Dayco – Poly Rib Belt Serpentine Belt; 44.5 Long, 4 Rib Count (Part No.5040445)

Dayco – Poly Rib Belt Serpentine Belt; 52.95 Long, 7 Rib Count (Part No.5070530)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080553HD)

Dayco – Poly Rib Belt, Premium, Dayco (Part No.5040390)

Gates – Micro-V Serpentine Drive Belt (Part No.K040388)

Dayco – Poly Rib Belt, Premium, Dayco (Part No.5080555)

Driveworks – V-Ribbed Belt, Driveworks (Part No.390K4)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K090500HD)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K070529HD)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080539HD)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22534)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22545)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22525)

Dayco – V-Belt, Top Cog, Dayco (Part No.22540)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22485)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22588)

Gates – FleetRunner Heavy-Duty V-Belt (Part No.9380HD)

Gates – Automotive XL High Capacity V-Belt (Part No.9380)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22397)

Dayco – Bottomcog V-Belt; 54.5 Inch Long, Exact Fit Premium Quality (Part No.22545)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22373)

Litens – Idler Pulley: Direct Fit, Steel, 80mm Diameter, With Hardware (Part No.900594A)

Gates – Hi-Power II Classical Section Wrapped V-Belt (Part No.A38)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080539HD)

Gates – Premium Molded Coolant Hose (Part No.24010)

Gates – Premium Molded Coolant Hose (Part No.24017)