2010 Sterling Bullet 45 Belts and Hoses
More 2010 Sterling Bullet 45 Belts and Hoses Categories
If you’re looking for an original Belts and Hoses replacement for a 2010 Sterling Bullet 45, you can search through our selection below. You’ll also find aftermarket and OEM Belts and Hoses to meet your needs.
Essential 2010 Sterling Bullet 45 Belts and Hoses
Gates – Premium Molded Coolant Hose (Part No.22892)
from
$27.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 15 1/2 Inch Length (Part No.86121)
from
$29.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Gates – Molded Heater Hose: EPDM, Direct Fit, 0.62" Inside Diameter (Part No.18774)
from
$31.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 10 1/2 Inch Length (Part No.87725)
from
$11.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Litens – Serpentine Belt Tensioner: 1 Piece (Part No.910032A)
from
$172.99
This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for Cummins 5.9/6.7L Diesel applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._
Product Features:
See More
Product Features:
- Heavy duty steel pulley construction.
- OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
- Installation instructions included
Dayco – Poly Rib Belt HD Serpentine Belt; 126 Long, 8 Rib Count, Heavy Duty (Part No.5081260)
from
$73.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. En
Product Features:
See More
Product Features:
- Engineered to handle operating conditions with temperatures up to 130°C (266°F)
- Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
- Capable of delivering excellent performance in high torque and high power pulse applications
- Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K081102HD)
from
$70.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Heavy-duty construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- Problem solver designed for the toughest applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Engineered to save your fleet money and reduce downtime
- Tensioner Replacement is Recommended (if equipped)
Dayco – Poly Rib Belt HD Serpentine Belt; 110.25 Long, 8 Rib Count, Heavy Duty (Part No.5081103)
from
$51.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. En
Product Features:
See More
Product Features:
- Engineered to handle operating conditions with temperatures up to 130°C (266°F)
- Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
- Capable of delivering excellent performance in high torque and high power pulse applications
- Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
Gates – V-Ribbed Serpentine Belt: 110.79" Long, 8 Rib Count, Exact Fit (Part No.K081102)
from
$59.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 123 mm Diameter (Part No.900365A)
from
$114.99
This pulley is designed and engineered by Litens Automotive; the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Applications include Dodge Pickups. Assembly includes: new pulley, mounting bolt, front washer, and rear spacer. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._
Product Features:
See More
Product Features:
- Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance
- Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance. Supplied as an assembly to reduce installation time.
- Installation instructions included.
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.69" Diameter (Part No.E72357)
from
$32.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13" Long, 1.94" Diameter (Part No.D72241)
from
$34.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Premium Molded Coolant Hose (Part No.22893)
from
$29.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.5" Long, 1.81" Diameter (Part No.D72905)
from
$32.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Serpentine Idler/Tensioner Pulley; 74.3 mm Dia., 39.25 mm Smooth (Part No.89094)
from
$20.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today.
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Popular 2010 Sterling Bullet 45 Belts and Hoses Categories
2010 Sterling Bullet 45 Belts and Hoses
You count on your 2010 Sterling Bullet 45 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 17 Belts and Hoses ranging in price from $11.79 to $172.99, you’re sure to find everything you need for your 2010 Sterling Bullet 45.
Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 4 different brands like Dayco, Litens, and Gates. 2010 Sterling Bullet 45 Belts and Hoses start as low as $11.79!
One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 83 extensive product reviews on 2010 Sterling Bullet 45 Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Poly Rib Belt HD Serpentine Belt; 110.25 Long, 8 Rib Count, Heavy Duty with 4.3 stars and Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 15 1/2 Inch Length with 4.7 stars.
Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 2010 Sterling Bullet 45 below to get started!
Top-Rated Belts and Hoses Brands For Your 2010 Sterling Bullet 45
Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Sterling Bullet 45 running right for years to come. In our inventory you’ll find brands like Dayco, Litens, Gates, and even more.
Popular Gates Belts and Hoses
You’ll find popular Gates brand products across Serpentine and V Belts. All are waiting to get your 2010 Sterling Bullet 45 back on the road. Some of the top-rated Gates products in these categories are:
Top-Rated Dayco Belts and Hoses
If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 2010 Sterling Bullet 45, and some of our most reviewed Dayco parts include:
from
$73.99
(49)
Poly Rib Belt HD Serpentine Belt; 126 Long, 8 Rib Count, Heavy Duty
Serpentine Belts
from
$20.99
(4)
Serpentine Idler/Tensioner Pulley; 74.3 mm Dia., 39.25 mm Smooth
Belt Tensioner Pulleys
from
$32.99
(4)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.69" Diameter
Coolant Hoses
FAQs for 2010 Sterling Bullet 45 Belts and Hoses
What are the most purchased Belts and Hoses for the 2010 Sterling Bullet 45?
Out of 17 Belts and Hoses for the 2010 Sterling Bullet 45, the most popular in our inventory are:
from
$61.99
(9)
Poly Rib Belt HD Serpentine Belt; 126 Long, 8 Rib Count, Heavy Duty
Serpentine Belts
from
$114.99
This product is not rated
O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 123 mm Diameter
Idler Pulleys
What are the top-rated 2010 Sterling Bullet 45 Belts and Hoses?
Top-rated Belts and Hoses for your 2010 Sterling Bullet 45 based on customer reviews/ratings are:
from
$51.99
(3)
Poly Rib Belt HD Serpentine Belt; 110.25 Long, 8 Rib Count, Heavy Duty
“No problems at all. Good quality belt.”
from
$29.99
(3)
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 15 1/2 Inch Length
“I installed this Molded Heater Hose by Drive-Rite with my new heater core. Hose is long enough to cut for a perfect fit.”
