2010 Nissan Versa Belts and Hoses

Essential Belts and Hoses for 2010 Nissan Versas

Dayco – Aramid Cord Poly Rib Belt Serpentine Belt; 47.72 Long, 6 Rib Count (Part No.A060477)

Aramid Cord Poly Rib Belt Serpentine Belt; 47.72 Long, 6 Rib Count

from

$31.99
The Dayco poly-V aramid belt is engineered to maintain a quiet, vibration-free belt drive system, especially for higher output OE engines that require an aramid belt. Unlike polyester-corded belts, this aramid cord belt is designed to resist the expected elongations, especially during high accessory loading. This unique feature of length stability and minimal stretch aids in difficult drives where span vibrations and tensioner movements are excessive. The Dayco aramid cord poly rib belt is built with Dayco’s specially designed EPDM rubber compounds to resist cracking and perform better under extreme temperature ranges.

Product Features:
  • Designed for applications with an OEM aramid belt and is specifically helpful for those with noise, vibration or harshness issues, or in-drive systems in which tensioner take-up is minimal
  • Length stability resists excessive span vibrations or tensioner movements
  • Features special compounds that resist cracking and perform well under intense engine temperatures 
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K070448)

Micro-V« Serpentine Drive Belt

from

$74.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 70mm Diameter (Part No.900687A)

Idler/Tensioner Pulley: Direct Fit, Steel, 70mm Diameter

from

$74.99
This Litens Idler/Tensioner Pulley is manufactured by one of the world’s largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. This pulley conforms to Original Equipment material, tolerances, and specifications. This part fits Nissan applications with 1.2/1.6L. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance.
  • Smooth/Backside Pulley.
  • Pulley Specs: 70mm (OD) x 10mm (ID -Inner Bore) x 33mm (Width).
See More

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 27mm Width, Smooth (Part No.89052)

Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 27mm Width, Smooth

from

$20.79
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Mitsuboshi – Multi-Rib (Serpentine) Belt (Part No.W1000567463MBL)

Multi-Rib (Serpentine) Belt

from

$33.01
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100091462MBL)

Multi-Rib (Serpentine) Belt

from

$36.89
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

INA – Acc. Belt Idler Pull (Part No.G6020518223INA)

Acc. Belt Idler Pull

from

$52.45
The INA Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 10 Inch Length (Part No.88352)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 10 Inch Length

from

$28.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 15 1/2 Inch Length (Part No.88479)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 15 1/2 Inch Length

from

$15.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.5" Long, 1.31" Diameter (Part No.D72466)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.5" Long, 1.31" Diameter

from

$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8.25" Long, 1.06" Diameter (Part No.B72823)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8.25" Long, 1.06" Diameter

from

$35.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.5" Long, 1.06" Diameter (Part No.B72821)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.5" Long, 1.06" Diameter

from

$27.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Suncore – Shock Kit (Part No.2-12S255700-001)

Shock Kit

from

$39.99
Shock Kit

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each)

from

$1.79
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time
  • Similar to SAE 20R3 Class D-3
  • Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications.
See More

INA – Acc. Belt Tensioner (Part No.G6001314516INA)

Acc. Belt Tensioner

from

$114.17
The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality precision spring tension assembly
  • OE specified bearing and pulley assembly
  • Durable long life performance
See More

Dorman – AUTO BELT TENSIONER (Part No.419-322)

AUTO BELT TENSIONER

from

$50.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:
  • Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles.
  • Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999787A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$66.99
Litens was the Original Equipment (O.E.) supplier of this tensioner and offers this “O.E. Exact” part for the aftermarket. This popular tensioner, designed for Nissan and Suzuki 1.8L and 2.0L vehicles, looks, fits, and performs like the original part being replaced. Unlike many Non-O.E. aftermarket tensioners, the Litens part maintains the internal damping feature for optimal performance and life. O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. Note – The heavy duty polymer pulley is attached to the tensioner with an integrated bolt/washer, has a molded locator pins for accurate installation, and the tensioner arm maintains the O.E. lift feature for easy belt removal, and installation. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Installation instructions included.
  • Durable Polymer Pulley for long service life and performance.
  • Professional Mechanics will change this tensioner in approx. 30 minutes
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.03" Diameter (Part No.B72822)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.03" Diameter

from

$32.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Radiator Hose (Part No.G20002149352DAY)

Radiator Hose

from

$24.62
Radiator Hose

Litens – Kit de courroie d’entrainement accessoire (Part No.LV999787A)

Kit de courroie d'entrainement accessoire

from

$77.99
This Litens Serpentine Belt Drive Component Kit fits 2007-2012 Nissan Versa w/1.8L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Upgrade your 2010 Nissan Versa with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2010 Nissan Versa, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Belts and Hoses are key to keeping your Versa functioning at its best. At Advance Auto Parts, we offer a wide selection of 30 Belts and Hoses for the 2010 Nissan Versa, designed to meet your needs without breaking the bank. From Heater Hose replacements to Engine Cooling Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2010 Nissan Versa at great prices. Our Belts and Hoses inventory for this model ranges from just $1.79 to $114.17, with an average price of $44.98. Our 30 Belts and Hoses in stock come from 11 trusted brands, so you’re sure to find the right part for your 2010 Nissan Versa without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Nissan Versa, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Litens, and more. Dayco Belts and Hoses start at just $14.99 and boast an impressive 5 stars average rating from customers. With 182 customer reviews and counting, our 2010 Nissan Versa Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Nissan Versa is always ready to roll. We’re committed to providing you with everything you need to keep your Versa in top shape, all in one place. Start shopping confidently below for your 2010 Nissan Versa!

Best-Selling Heater Hoses for 2010 Nissan Versas

Enhance the driving experience in your Nissan with 4 quality Heater Hose components, starting at $11.60.

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 10 Inch Length (Part No.88352)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 10 Inch Length

from

$28.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 15 1/2 Inch Length (Part No.88479)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 15 1/2 Inch Length

from

$15.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Heater Hose (Part No.R3030513725GAT)

Heater Hose

from

$13.47
Heater Hose

Gates – Heater Hose (Part No.R3030513723GAT)

Heater Hose

from

$11.60
Heater Hose

Most Popular 2010 Nissan Versa Engine Cooling Hoses

Customize your Nissan with 4 Engine Cooling Hoses products like Upper Radiator Hoses and Lower Radiator Hoses, all priced under $39.99.

Dayco – Flex Radiator Hoses; EPDM Rubber, 14.75 Inch Long, 1.25 Inch Inner Dia. (Part No.81041)

Flex Radiator Hoses; EPDM Rubber, 14.75 Inch Long, 1.25 Inch Inner Dia.

from

$14.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.5" Long, 1.31" Diameter (Part No.D72466)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.5" Long, 1.31" Diameter

from

$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Suncore – Shock Kit (Part No.2-12S255700-001)

Shock Kit

from

$39.99
Shock Kit

Gates – Radiator Hose (Part No.G2000379827GAT)

Radiator Hose

from

$36.96
Radiator Hose

Top Picks for 2010 Nissan Versa Serpentine and V Belts

Upgrade Nissan Versas with top-quality Serpentine and V Belts parts, including 12 OEM and aftermarket selections for your 2010 model.

Dayco – Poly Rib Belt Serpentine Belt; 47.5 Long, 6 Rib Count (Part No.5060475)

Poly Rib Belt Serpentine Belt; 47.5 Long, 6 Rib Count

from

$41.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 47.5 Long, 6 Rib Count (Part No.475K6)

Poly Rib Belt Serpentine Belt; 47.5 Long, 6 Rib Count

from

$24.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 44.88 Long, 7 Rib Count (Part No.5070449)

Poly Rib Belt Serpentine Belt; 44.88 Long, 7 Rib Count

from

$55.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Dayco – Aramid Cord Poly Rib Belt Serpentine Belt; 47.5 Long, 6 Rib Count (Part No.A060475)

Aramid Cord Poly Rib Belt Serpentine Belt; 47.5 Long, 6 Rib Count

from

$40.99
The Dayco poly-V aramid belt is engineered to maintain a quiet, vibration-free belt drive system, especially for higher output OE engines that require an aramid belt. Unlike polyester-corded belts, this aramid cord belt is designed to resist the expected elongations, especially during high accessory loading. This unique feature of length stability and minimal stretch aids in difficult drives where span vibrations and tensioner movements are excessive. The Dayco aramid cord poly rib belt is built with Dayco’s specially designed EPDM rubber compounds to resist cracking and perform better under extreme temperature ranges.

Product Features:
  • Designed for applications with an OEM aramid belt and is specifically helpful for those with noise, vibration or harshness issues, or in-drive systems in which tensioner take-up is minimal
  • Length stability resists excessive span vibrations or tensioner movements
  • Features special compounds that resist cracking and perform well under intense engine temperatures 
See More

Dayco – Aramid Cord Poly Rib Belt Serpentine Belt; 41.57 Long, 7 Rib Count (Part No.A070416)

Aramid Cord Poly Rib Belt Serpentine Belt; 41.57 Long, 7 Rib Count

from

$46.99
The Dayco poly-V aramid belt is engineered to maintain a quiet, vibration-free belt drive system, especially for higher output OE engines that require an aramid belt. Unlike polyester-corded belts, this aramid cord belt is designed to resist the expected elongations, especially during high accessory loading. This unique feature of length stability and minimal stretch aids in difficult drives where span vibrations and tensioner movements are excessive. The Dayco aramid cord poly rib belt is built with Dayco’s specially designed EPDM rubber compounds to resist cracking and perform better under extreme temperature ranges.

Product Features:
  • Designed for applications with an OEM aramid belt and is specifically helpful for those with noise, vibration or harshness issues, or in-drive systems in which tensioner take-up is minimal
  • Length stability resists excessive span vibrations or tensioner movements
  • Features special compounds that resist cracking and perform well under intense engine temperatures 
See More

Litens – Kit de courroie d’entrainement accessoire (Part No.LV999787A)

Kit de courroie d'entrainement accessoire

from

$77.99
This Litens Serpentine Belt Drive Component Kit fits 2007-2012 Nissan Versa w/1.8L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K070448)

Micro-V« Serpentine Drive Belt

from

$74.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100091462MBL)

Multi-Rib (Serpentine) Belt

from

$36.89
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Bando – Drive Belt (Part No.W10002440784BAN)

Drive Belt

from

$29.28
Drive Belt

Mitsuboshi – Multi-Rib (Serpentine) Belt (Part No.W10001514416MBL)

Multi-Rib (Serpentine) Belt

from

$28.77
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W1000656334BAN)

Multi Rib (Serpentine) Belt

from

$26.93
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W1000100435BAN)

Multi Rib (Serpentine) Belt

from

$24.24
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

In-Demand Pulleys for 2010 Nissan Versas

Select from 3 premium Pulleys parts for your 2010 Nissan Versa, with prices ranging from $20.79 to $74.99.

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 27mm Width, Smooth (Part No.89052)

Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 27mm Width, Smooth

from

$20.79
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 70mm Diameter (Part No.900687A)

Idler/Tensioner Pulley: Direct Fit, Steel, 70mm Diameter

from

$74.99
This Litens Idler/Tensioner Pulley is manufactured by one of the world’s largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. This pulley conforms to Original Equipment material, tolerances, and specifications. This part fits Nissan applications with 1.2/1.6L. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance.
  • Smooth/Backside Pulley.
  • Pulley Specs: 70mm (OD) x 10mm (ID -Inner Bore) x 33mm (Width).
See More

INA – Acc. Belt Idler Pull (Part No.G6020518223INA)

Acc. Belt Idler Pull

from

$52.45
The INA Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Most Sold 2010 Nissan Versa Belt Tensioners

Explore our best-selling Nissan parts for the 2010 Versa among 3 OEM and aftermarket options starting from $50.99.

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999787A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$66.99
Litens was the Original Equipment (O.E.) supplier of this tensioner and offers this “O.E. Exact” part for the aftermarket. This popular tensioner, designed for Nissan and Suzuki 1.8L and 2.0L vehicles, looks, fits, and performs like the original part being replaced. Unlike many Non-O.E. aftermarket tensioners, the Litens part maintains the internal damping feature for optimal performance and life. O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. Note – The heavy duty polymer pulley is attached to the tensioner with an integrated bolt/washer, has a molded locator pins for accurate installation, and the tensioner arm maintains the O.E. lift feature for easy belt removal, and installation. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Installation instructions included.
  • Durable Polymer Pulley for long service life and performance.
  • Professional Mechanics will change this tensioner in approx. 30 minutes
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

INA – Acc. Belt Tensioner (Part No.G6001314516INA)

Acc. Belt Tensioner

from

$114.17
The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality precision spring tension assembly
  • OE specified bearing and pulley assembly
  • Durable long life performance
See More

Dorman – AUTO BELT TENSIONER (Part No.419-322)

AUTO BELT TENSIONER

from

$50.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:
  • Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles.
  • Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Top-Rated Belts and Hoses Brands For Your 2010 Nissan Versa

Shop for the best-rated brands offering Belts and Hoses and other products for your 2010 Nissan Versas. Below you’ll find some of our best rated Belts and Hoses from Dayco and Litens, and more. Belts and Hoses from these brands that fit a 2010 Versa start at just $14.99 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2010 Nissan Versa Belts and Hoses

When it comes to maintaining or upgrading your 2010 Nissan Versa, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2010 Nissan Versa. With over 10 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $31.46. Plus, with over 79 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Poly Rib Belt Serpentine Belt; 44.88 Long, 7 Rib Count
from
$55.99
This product is not rated

Poly Rib Belt Serpentine Belt; 44.88 Long, 7 Rib Count

“”

Aramid Cord Poly Rib Belt Serpentine Belt; 47.5 Long, 6 Rib Count
from
$40.99
This product is not rated

Aramid Cord Poly Rib Belt Serpentine Belt; 47.5 Long, 6 Rib Count

“”

Popular Litens 2010 Nissan Versa Belts and Hoses

Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 2010 Nissan Versa owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 2010 Versa, Advance Auto Parts carries a full inventory of 3 Litens Belts and Hoses. Plus you will be keeping your Nissan in peak condition while saving money because prices on these Litens Belts and Hoses range from $66.99 to $77.99, plus, with more than 7 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

Idler/Tensioner Pulley: Direct Fit, Steel, 70mm Diameter
from
$74.99
This product is not rated

Idler/Tensioner Pulley: Direct Fit, Steel, 70mm Diameter

“”

Accessory Drive Belt Tensioner - Original Equipment Quality
from
$66.99

(7)

Accessory Drive Belt Tensioner – Original Equipment Quality

“Good price and Good Quality.”

Kit de courroie d'entrainement accessoire
from
$77.99
This product is not rated

Kit de courroie d’entrainement accessoire

“”

FAQs for 2010 Nissan Versa Belts and Hoses

Which Belts and Hoses are best-sellers for 2010 Nissan Versas?

Out of 30 Belts and Hoses that fit 2010 Nissan Versas, the following parts are the top sellers:

What’s the price range for 2010 Nissan Versa Belts and Hoses?

Belts and Hose prices for the 2010 Nissan Versa start at $1.79 and go up to $114.17 for the most premium parts.

What’s the average price of a Belts and Hose for a 2010 Nissan Versa?

The average price for Belts and Hoses for the 2010 Nissan Versa is $44.98. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Nissan Versa model years?

Yes, we currently carry Belts and Hoses for 17 model years of Nissan Versas between 2007 and 2024. Belts and Hoses are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Belts and Hoses for my 2010 Nissan Versa?

The cheapest 2010 Nissan Versa Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 2010 Nissan Versa?

Out of 182 reviews by customers, our 2010 Nissan Versa Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2010 Nissan Versa and their top-rated products:

What types of Belts and Hoses do you sell for my 2010 Nissan Versa?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2010 Nissan Versa:

Can I get help with 2010 Nissan Versa Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Belts and Hoses and more.

What is your return policy for Nissan Versa Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Nissan Versa Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.