2010 Mercury Mariner Body Parts

Below you will find various in-demand Mercury Body Parts, components and accessories for your 2010 Mariner. Advance Auto Parts has popular Mariner parts like Vehicle Doors, Vehicle Latches and Handles, Vehicle Hoods and more. You’ll also find aftermarket and OEM Body Parts for other Mariner model years including 2005, 2006, 2007, 2008, 2009, 2011 and more. Select a category of 2010 Mercury Mariner Body Parts below and start saving instantly.

Popular 2010 Mercury Mariner Body Parts Categories

Door Hinge Parts

Door Hinge Pin Kits

Window Regulators

Tailgate Lock Actuators

Rear Spoiler and Wings

Custom 3rd Brake Assemblies

Side Bars and Sideskirts

Power Window Switches

Tailgate Switches

Exterior Door Handles

Interior Door Handles

Front Bumper Covers

Bumper Cover Reinforcements

Fender Splash Shields

Fender Braces

Bumper Impact Absorbers

Mirror Replacement Glass

Sunroof Switches

Bumper Brackets

Front End Covers

Bumper Cover Support Rails

Door Mirror Connectors

Door Ajar and Interior Light Switch Connectors

Trunk Lid Switches

Sunroof Relays

Bumper Impact Bar Braces

Essential Body Parts for 2010 Mercury Mariners

from

$15.99

New Standard Replacement Passenger Side Rear Bumper Cover Side Support

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$294.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, Chrome Finish, for Use With Voga Package. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Chrome Finish, For Use With Voga Package, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$28.49

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$64.99

This replacement liftgate glass hinge matches the fit, function and appearance of the original equipment hinge on specific vehicle applications. Made of quality materials, this hinge is designed for a reliable service life.

Product Features:

Ideal replacement – this liftgate glass hinge directly replaces the original equipment hinge on specific vehicles.
Durable construction – this hinge is made of quality materials to match the original equipment finish.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$81.99

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
Mirror glass is power adjustable and heated
OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
Manual folding for additional clearance
Black, can be Paintable to match vehicle

from

$22.79

Replacement Mirror Glass. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

The most economical way to replace cracked Mirror glass
Glass measures 5 11/16″ tall by 7 5/8″ wide and 8 7/16″ diagonally
This glass DOES NOT having heating capabilities but can fit Mirrors with Manual and Heated Power functions
Mounting tape included for low-hassle stick-on installation
Step-by-step instructions for easy installation

from

$52.99

As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, We Are Supplying a New CAPA Certified Premium Replacement Front Passenger Side Bumper Impact Bar Brace. It is Designed to Replace Your Existing Bumper Impact Bar Brace. Check to Be Sure it Fits Your Vehicle.

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$30.99

New Standard Replacement Passenger Side Fender Liner/Splash Shield

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$43.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$123.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$86.99

Need a new third brake light assembly that looks, fits and performs like the original, without the hassle of going back to the dealership? This replacement was reverse-engineered to match the stock center high mount stop light on specific vehicles.

Product Features:

Ideal replacement – this third brake light assembly was specifically designed to look and function like the original light on specific vehicles.
Quality construction – made from quality materials for excellent visibility and illumination.
Trustworthy design – backed by team of engineers and specialists in the United States
Thoroughly tested – this part has undergone extensive testing to help ensure a secure fit and long service life

from

$309.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$135.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$25.99

New Standard Replacement Driver Side Fender Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$55.99

from

$52.85

Window Regulator w/

from

$97.99

Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
Mirror glass is power adjustable
OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
Manual folding for additional clearance
Black, can be Paintable to match vehicle

from

$28.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$34.49

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

Direct replacement – this hood release cable is made to match the original cable on specific vehicles.
Durable construction -manufactured within strict tolerances for reliable longevity.
Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$411.99

A tubular side step for your vehicle. Dee Zee Universal Steps are available when a custom fit application is not available for your vehicle. Drilling is required into the vehicle frame for mounting. Sturdy hidden bracing and hardware is coated to help prevent rust and keep your tubes strong. Molded plastic step pads provide a non-skid stepping area. Universal Nerf Bars are available in 3 Inch Round or 4 Inch Oval designs. 3 Inch Round designs are available in UltraShine Aluminum, Black Aluminum, Polished Stainless Steel or Black Steel. 4 Inch Oval designs feature UltraShine Aluminum or Black Aluminum.

Product Features:

Mounting Kit Included
Frame Body Mount Bolts
Drilling Required
1 Pad On The Bar
Frame Mounted For Maximum Strength
Powder Coated Steel Braces Resist Rust
Powder Coated Steel Braces Resist Rust
Molded Plastic Step Pads For Secure Footing
Fit Most Full And Mid Size Pickups

from

$22.99

This bumper bracket matches the fit, function and materials of the original equipment bumper bracket that may be damaged or missing. This part has undergone testing to ensure proper fit for a trouble-free installation.

Product Features:

Ideal replacement – this bumper bracket is a direct replacement for an original equipment part that may be damaged or missing.
Durable construction – this bumper bracket is made from quality materials to match the original equipment part
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit for a trouble-free installation

from

$61.99

from

$116.99

As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, We Are Supplying a New CAPA Certified Diamond Premium Replacement Rear Bumper Impact Absorber, Without Tow Package. It is Designed to Replace Your Existing Bumper Impact Absorber. Check to Be Sure it Fits Your Vehicle.

Product Features:

Without Tow Package, Made Of Polycarbonate and Polybutylene Terephthalate
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$18.99

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal
Non-Stick Back-Up Ring
Hardened Nitride Plated Steel Shaft
Engineered In USA To OE Quality Standards For Performance And Durability
IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
Easy To Install In Just Minutes. No Special Tools Required.
Exact Fit Original Equipment Design Guarantees Correct Fit And Function
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$62.99

New Standard Replacement Front Bumper Lower Spoiler, Matte Black

Product Features:

Matte Black, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$117.99

New CAPA Certified Standard Replacement Front Bumper Cover Reinforcement Bar

Product Features:

Made Of High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$721.99

New Standard Replacement Front Bumper Cover, Without Pre-Drilled Sensor Holes, Paint To Match

Product Features:

Without Pre-Drilled Sensor Holes, Paint To Match, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$28.49

Upgrade your 2010 Mercury Mariner with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2010 Mercury Mariner, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Body Parts are key to keeping your Mariner functioning at its best. At Advance Auto Parts, we offer a wide selection of 99 Body Parts for the 2010 Mercury Mariner, designed to meet your needs without breaking the bank. From Vehicle Door replacements to Vehicle Latches and Handles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2010 Mercury Mariner at great prices. Our Body Parts inventory for this model ranges from just $7.99 to $767.99, with an average price of $96.04. Our 99 Body Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 2010 Mercury Mariner without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Mercury Mariner, we stock popular OEM and aftermarket Body Parts from top names like StrongArm, Dorman, K-Source, and more. StrongArm Body Parts start at just $13.79 and boast an impressive 5 stars average rating from customers. Dorman and K-Source also bring quality to the table, with Body Parts available starting at $12.99, and at an average 4 stars rating. With 235 customer reviews and counting, our 2010 Mercury Mariner Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Mercury Mariner is always ready to roll. We’re committed to providing you with everything you need to keep your Mariner in top shape, all in one place. Start shopping confidently below for your 2010 Mercury Mariner!

Best-Selling Vehicle Doors for 2010 Mercury Mariners

Enhance the driving experience in your Mercury with 10 quality Vehicle Door components, starting at $13.99.

show more show less

from

$19.99

This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles.
Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$64.99

Ideal replacement – this liftgate glass hinge directly replaces the original equipment hinge on specific vehicles.
Durable construction – this hinge is made of quality materials to match the original equipment finish.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$317.99

from

$272.99

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$256.99

from

$61.99

from

$55.99

from

$38.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$28.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$13.99

Door Hinge Pin and Bushing Kit – Applications: Ford Contour/Mystique Front and Rear Doors, 2000-94

Most Popular 2010 Mercury Mariner Vehicle Latches and Handles

Customize your Mercury with 3 Vehicle Latches and Handles products like Exterior Door Handles and Interior Door Handles, all priced under $43.99.

show more show less

from

$43.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$43.49

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$28.49

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Top Picks for 2010 Mercury Mariner Vehicle Hoods

Upgrade Mercury Mariners with top-quality Vehicle Hoods parts, including 5 OEM and aftermarket selections for your 2010 model.

show more show less

from

$18.99

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal
Non-Stick Back-Up Ring
Hardened Nitride Plated Steel Shaft
Engineered In USA To OE Quality Standards For Performance And Durability
IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
Easy To Install In Just Minutes. No Special Tools Required.
Exact Fit Original Equipment Design Guarantees Correct Fit And Function
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$13.79

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$27.99

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
Trilingual Install Instructions provided inside each package

from

$34.49

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

Direct replacement – this hood release cable is made to match the original cable on specific vehicles.
Durable construction -manufactured within strict tolerances for reliable longevity.
Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$26.88

Hatch Window Strut

In-Demand Bodies and Fender Parts for 2010 Mercury Mariners

Select from 17 premium Bodies and Fender Parts parts for your 2010 Mercury Mariner, with prices ranging from $15.99 to $661.99.

show more show less

from

$274.99

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

Vehicle Specific Mounting Kit Required; Sold Separately
4 in. Oval Tube
Injection Molded Polymer Step Pad
Molded Oval End Caps
Bolt-On Installation; No Drilling Required
3 Year Warranty

from

$661.99

Mounting Kit Included
Frame Body Mount Bolts
Drilling Required
1 Pad On The Bar
Frame Mounted For Maximum Strength
Powder Coated Steel Braces Resist Rust
Powder Coated Steel Braces Resist Rust
Molded Plastic Step Pads For Secure Footing
Fit Most Full And Mid Size Pickups

from

$448.99

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

Vehicle Specific Mounting Kit Required; Sold Separately
4 in. Oval Tube
Injection Molded Polymer Step Pad
Molded Oval End Caps
Bolt-On Installation; No Drilling Required
Limited Lifetime Warranty

from

$411.99

Mounting Kit Included
Frame Body Mount Bolts
Drilling Required
1 Pad On The Bar
Frame Mounted For Maximum Strength
Powder Coated Steel Braces Resist Rust
Powder Coated Steel Braces Resist Rust
Molded Plastic Step Pads For Secure Footing
Fit Most Full And Mid Size Pickups

from

$159.99

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$73.99

New CAPA Certified Standard Replacement Passenger Side Fender Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$72.99

New CAPA Certified Standard Replacement Driver Side Fender Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$65.99

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

Protects vehicle’s hood from bugs or rock chips
Low profile, aerodynamic design
Installs in less than 5 minutes, no tools required
Custom fit exactly to your vehicle
Leather grain vinyl

from

$62.99

New Standard Replacement Front Bumper Lower Spoiler, Matte Black

Product Features:

Matte Black, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$35.99

New CAPA Certified Standard Replacement Passenger Side Fender Liner

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$35.99

New CAPA Certified Standard Replacement Driver Side Fender Liner

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$30.99

New Standard Replacement Passenger Side Fender Liner

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$30.99

New Standard Replacement Driver Side Fender Liner

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$25.99

New Standard Replacement Driver Side Fender Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$23.99

New Standard Replacement Passenger Side Fender Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$17.99

New Standard Replacement Passenger Side Fender Liner/Splash Shield

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$15.99

New Standard Replacement Driver Side Front Lower Splash Shield

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Most Sold 2010 Mercury Mariner Vehicle Windows

Explore our best-selling Mercury parts for the 2010 Mariner among 7 OEM and aftermarket options starting from $50.99.

show more show less

from

$62.99

This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

from

$76.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

from

$76.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

from

$120.97

Motorcraft window regulators and regulator assemblies are designed to provide perfect fit and easier, faster installation. They also include the latest innovations and engineering upgrades.

Product Features:

Pre-lubricated for quiet operation
Attachment points line up with the vehicle door and glass holes, providing a quality installation
To help ensure smooth travel and optimal window speeds, regulator and glass paths are matched
Durability tested
Regulator assemblies include Motorcraft window lift motors

from

$69.44

Window Regulator w/

from

$59.70

Window Regulator w/

from

$50.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

Top-Rated Body Parts Brands For Your 2010 Mercury Mariner

Shop for the best-rated brands offering Body Parts and other products for your 2010 Mercury Mariners. Below you’ll find some of our best rated Body Parts from StrongArm, Dorman, and K-Source, and more. Body Parts from these brands that fit a 2010 Mariner start at just $12.99 and are rated as high as 5 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular StrongArm 2010 Mercury Mariner Body Parts

When it comes to maintaining or upgrading your 2010 Mercury Mariner, using quality Body Parts is essential to ensure durability and a perfect fit. StrongArm ticks all of those boxes. We offer a wide selection of StrongArm Body Parts, specifically designed for the 2010 Mercury Mariner. With over 2 StrongArm brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.79, with an average price of just $16.39. Plus, with over 23 customer reviews and an average rating of 5 stars, you can trust that our StrongArm Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$18.99

(1)

Back Glass Lift Support: 17.42" Ext Length, 6.25" Travel, 33 Lbs of Force, 1 Pk

“Work like oem”

from
$13.79

(22)

Liftgate Lift Support: 21.91" Ext Length, 7.12" Travel, 141 Lbs of Force, 1 Pk

“In stock, exactly as shown online and Easy store pickup”

Popular Dorman 2010 Mercury Mariner Body Parts

Dorman auto parts is one of the highest quality Body Part brands in the market. Any 2010 Mercury Mariner owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2010 Mariner, Advance Auto Parts carries a full inventory of 22 Dorman Body Parts. Plus you will be keeping your Mercury in peak condition while saving money because prices on these Dorman Body Parts range from $19.99 to $272.99, plus, with more than 9 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.

from
$52.99

This product is not rated

Rear Release Switch

“”

from
$86.99

This product is not rated

Third Brake Light Assembly

“”

from
$64.99

This product is not rated

Tailgate Glass Hinge

“”

FAQs for 2010 Mercury Mariner Body Parts

Which Body Parts are best-sellers for 2010 Mercury Mariners?

Out of 99 Body Parts that fit 2010 Mercury Mariners, the following parts are the top sellers:

Tailgate Glass Hinge (11839826) – $64.99
Rear Release Switch (11786987) – $52.99
Third Brake Light Assembly (10572865) – $86.99

What’s the price range for 2010 Mercury Mariner Body Parts?

Body Part prices for the 2010 Mercury Mariner start at $7.99 and go up to $767.99 for the most premium parts.

What’s the average price of a Body Part for a 2010 Mercury Mariner?

The average price for Body Parts for the 2010 Mercury Mariner is $96.04. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Mercury Mariner model years?

Yes, we currently carry Body Parts for 6 model years of Mercury Mariners between 2005 and 2011. Body Parts are bought most frequently for the following model years: 2011, 2009, 2008, 2007, 2006, and 2005.

What are the cheapest Body Parts for my 2010 Mercury Mariner?

The cheapest 2010 Mercury Mariner Body Parts we carry in stock are:

Bumper Mounting Bracket (11745334) – $7.99
Bumper Mounting Bracket (11744540) – $8.99
Passenger Car Replacement Glass: Driver Side, Flat Glass, Includes Mounting Tape and Instructions (10155921) – $12.99
Liftgate Lift Support: 21.91" Ext Length, 7.12" Travel, 141 Lbs of Force, 1 Pk (20940081) – $13.79
Door Hinge Pin and Bushing Kit – Applications: Ford Contour/Mystique Front and Rear Doors, 2000-94 (10856430) – $13.99

What are the top-rated Body Parts that fit the 2010 Mercury Mariner?

Out of 235 reviews by customers, our 2010 Mercury Mariner Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 2010 Mercury Mariner and their top-rated products:

Vehicle Hoods
- Back Glass Lift Support: 17.42" Ext Length, 6.25" Travel, 33 Lbs of Force, 1 Pk (10169706) – $18.99
- Liftgate Lift Support: 21.91" Ext Length, 7.12" Travel, 141 Lbs of Force, 1 Pk (20940081) – $13.79
Vehicle Windows
- Back Glass Lift Support: 17.42" Ext Length, 6.25" Travel, 33 Lbs of Force, 1 Pk (10169706) – $18.99
- Liftgate Lift Support: 21.91" Ext Length, 7.12" Travel, 141 Lbs of Force, 1 Pk (20940081) – $13.79

What types of Body Parts do you sell for my 2010 Mercury Mariner?

As of 2/5/25, these are some of the most in-demand types of Body Parts for a 2010 Mercury Mariner:

Can I get help with 2010 Mercury Mariner Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Body Parts and more.

What is your return policy for Mercury Mariner Body Parts?

Advance Auto Parts keeps returns simple. For new Mercury Mariner Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2010 Mercury Mariner Body Parts

KAI – Bumper Cover Side Support (Part No.FO1143111)

KAI – New Standard Replacement Grille, Chrome Finish, For Use With Voga Package (Part No.FO1200524)

Dorman – Help – Interior Door Handle – Front Right – Black (Part No.81771)

Dorman – Tailgate Glass Hinge (Part No.924-123)

K-Source – Mirror Assembly: Passenger Side, Power Adjustment, Heated, Foldable, 1 Pk (Part No.61165F)

K-Source – Truck/ SUV Replacement Glass: Passenger Side, Convex Glass, Includes Mounting Tape and Instructions (Part No.90212)

KAI – New CAPA Certified Prem Replacement Front Passenger Side Bumper Impact Bar Brace (Part No.FO1067188DSC)

KAI – Fender Splash Shield (Part No.FO1251127)

Dorman – Help – Exterior Door Handle Front Left/Right (Part No.91097)

Carquest Premium – Sunroof Relay (Part No.RAA2531)

Dorman – Third Brake Light Assembly (Part No.923-225)

Dorman – Door Lock Actuator – Integrated With Latch (Part No.937-641)

Motorcraft – Original Equipment (O.E.) Switch – Window Control – Double (Part No.SW-7245)

KAI – Fender Brace (Part No.FO1244102)

Carquest Premium – Door Lock Switch (Part No.SBA4662)

Autopart International Inc – Window Regulator w/ (Part No.O30521994344API)

K-Source – Mirror Assembly: Passenger Side, Power Adjustment, Foldable, 1 Pk (Part No.61167F)

Carquest Premium – Brake Fluid Level Sensor Connector (Part No.PTA1729)

Dorman – Hood Release Cable With Handle (Part No.912-193)

Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Powder Coated, Black, Steel (Part No.DZ3700301)

Dorman – Help – Bumper Mounting Bracket (Part No.46818)

Carquest Premium – Multi Purpose Connector (Part No.PTA2944)

KAI – New CAPA Certified Diamond Premium Replacement Rear Bumper Impact Absorber (Part No.FO1170132DSC)

StrongArm – Back Glass Lift Support: 17.42" Ext Length, 6.25" Travel, 33 Lbs of Force, 1 Pk (Part No.D6260)

KAI – Spoiler (Part No.FO1093115)

KAI – Bumper Cover Reinforcement (Part No.FO1025111C)

KAI – Bumper Cover (Part No.FO1000623)

Carquest Premium – Liftgate Release Switch (Part No.SBA4564)

Dorman – Help – Door Hinge Pin And Bushing Kit (Part No.38465)

Dorman – Tailgate Glass Hinge (Part No.924-123)

Carquest Premium – Door Lock Actuator (Part No.DLN1295)

Dorman – Door Lock Actuator – Integrated With Latch (Part No.937-650)

Carquest Premium – Door Lock Actuator (Part No.DLN1618)

Carquest Premium – Multi Purpose Connector (Part No.PTA2944)

Carquest Premium – Door Lock Switch (Part No.SBA4662)

Carquest Premium – Door Ajar / Interior Light Switch Connector (Part No.PTA1884)

Carquest Premium – Brake Fluid Level Sensor Connector (Part No.PTA1729)

Needa Parts – Door Hinge Pin and Bushing Kit – Applications: Ford Contour/Mystique Front and Rear Doors, 2000-94 (Part No.38465)

Dorman – Help – Exterior Door Handle Front Left/Right (Part No.91097)

Dorman – Help – Exterior Door Handle Front Left Smooth Black (Part No.82181)

Dorman – Help – Interior Door Handle – Front Right – Black (Part No.81771)

StrongArm – Back Glass Lift Support: 17.42" Ext Length, 6.25" Travel, 33 Lbs of Force, 1 Pk (Part No.D6260)

StrongArm – Liftgate Lift Support: 21.91" Ext Length, 7.12" Travel, 141 Lbs of Force, 1 Pk (Part No.C4370)

Atlas Lift – Lift Support (Part No.LS10143)

Dorman – Hood Release Cable With Handle (Part No.912-193)

Autopart International Inc – Hatch Window Strut (Part No.O20722196120API)

Westin – Premier 4 Oval Nerf Step Bars (Part No.22-5065)

Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Polished, Ss, With Welded End Caps (Part No.DZ3700303)

Westin – Premier 4 Oval Nerf Step Bars (Part No.22-5060)

Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Powder Coated, Black, Steel (Part No.DZ3700301)

Le Bra – Front End Cover (Part No.551195-01)

KAI – Fender Brace (Part No.FO1245102C)

KAI – Fender Brace (Part No.FO1244102C)

Covercraft – Custom Hood Protector (Part No.45556-01)

KAI – Spoiler (Part No.FO1093115)

KAI – Fender Liner (Part No.FO1249126C)

KAI – Fender Liner (Part No.FO1248126C)

KAI – Fender Liner (Part No.FO1249126)

KAI – Fender Liner (Part No.FO1248126)

KAI – Fender Brace (Part No.FO1244102)

KAI – Fender Brace (Part No.FO1245102)

KAI – Fender Splash Shield (Part No.FO1251148)

KAI – Fender Splash Shield (Part No.FO1250148)

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.751-713)

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.751-297)

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.751-296)

Motorcraft – Window Regulator and Motor Assembly (Part No.O3052439120MTR)

Autopart International Inc – Window Regulator w/ (Part No.O30521935533API)

Autopart International Inc – Window Regulator w/ (Part No.O30522043255API)

Dorman – Window Regulator: Power, 1 Pack (Part No.752-296)