2010 Mazda CX-9 Suspension Parts

Below you will find various in-demand Mazda Suspension Parts, components and accessories for your 2010 CX-9. Advance Auto Parts has popular CX-9 parts like Coil and Leaf Springs, Control Arms, Air Suspension and Kits and more. You’ll also find aftermarket and OEM Suspension Parts for other CX-9 model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2010 Mazda CX-9 Suspension Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2010 Mazda CX-9 Suspension Parts Categories

Suspension Strut and Coil Spring Assemblies

Rear Shock and Struts

Front Shock and Struts

Suspension Strut Bumper and Bellows Kits

Lower Control Arms

Lower Control Arm Bushings

Strut Mounts

Lateral Arms

Shock Absorber Kits

Essential Suspension Parts for 2010 Mazda CX-9s

from

$44.99

Shock Kit

from

$214.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$175.99

COMPLET STRUT ASMBLY

from

$218.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$49.99

Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$45.49

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$124.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
OE replacement
Reduces vibration
Reduces tire wear

from

$57.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$72.99

Control Arm Bushing

from

$20.49

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING – Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS – Made from high-quality materials for durability and ride performance
OE-STYLE DESIGN – Engineered to match or exceed OE requirements
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$22.29

Backed by superior materials and rigorous testing, MOOG® control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality materials for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$114.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$83.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$29.99

Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$244.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$139.99

Complete Strut Assem

from

$184.99

Featuring a vehicle-specific design, Monroe Quick-Strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. An all-in-one solution, the Monroe Quick-Strut assembly simplifies the installation process by including all the required components in a single unit. With a heritage of delivering leading-edge products for over 100 years, you can count on Monroe for your next repair.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, “like-new” steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee
ASSEMBLED IN THE USA – This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee. Visit Monroe.com for details.

from

$24.99

Gas Shock

from

$108.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$69.99

SHOCK ABSORBER

Upgrade your 2010 Mazda CX-9 with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2010 Mazda CX-9, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Suspension Parts are key to keeping your CX-9 functioning at its best. At Advance Auto Parts, we offer a wide selection of 19 Suspension Parts for the 2010 Mazda CX-9, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Control Arms upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2010 Mazda CX-9 at great prices. Our Suspension Parts inventory for this model ranges from just $24.99 to $269.99, with an average price of $107.23. Our 19 Suspension Parts in stock come from 7 trusted brands, so you’re sure to find the right part for your 2010 Mazda CX-9 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Mazda CX-9 is always ready to roll. We’re committed to providing you with everything you need to keep your CX-9 in top shape, all in one place. Start shopping confidently below for your 2010 Mazda CX-9!

Best-Selling Coil and Leaf Springs for 2010 Mazda CX-9s

Enhance the driving experience in your Mazda with 1 quality Coil and Leaf Spring components, starting at $139.99.

show more show less

from

$139.99

Complete Strut Assem

Top Picks for 2010 Mazda CX-9 Air Suspension and Kits

Upgrade Mazda CX-9s with top-quality Air Suspension and Kits parts, including 2 OEM and aftermarket selections for your 2010 model.

show more show less

from

$29.99

REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$44.99

Shock Kit

In-Demand Shocks and Struts for 2010 Mazda CX-9s

Select from 9 premium Shocks and Struts parts for your 2010 Mazda CX-9, with prices ranging from $24.99 to $269.99.

show more show less

from

$108.99

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$269.99

Quick Strut Kit

from

$218.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$218.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$139.99

Complete Strut Assem

from

$24.99

Gas Shock

from

$49.99

PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$214.99

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$69.99

SHOCK ABSORBER

FAQs for 2010 Mazda CX-9 Suspension Parts

Which Suspension Parts are best-sellers for 2010 Mazda CX-9s?

Out of 19 Suspension Parts that fit 2010 Mazda CX-9s, the following parts are the top sellers:

OESpectrum Suspension Shock Absorber (10464829) – $108.99
Complete Strut Assembly: Includes Strut, Coil Spring and Mount (12220166) – $218.99
Complete Strut Assembly: Includes Strut, Coil Spring and Mount (12220096) – $218.99

What’s the price range for 2010 Mazda CX-9 Suspension Parts?

Suspension Part prices for the 2010 Mazda CX-9 start at $24.99 and go up to $269.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2010 Mazda CX-9?

The average price for Suspension Parts for the 2010 Mazda CX-9 is $107.23. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Mazda CX-9 model years?

Yes, we currently carry Suspension Parts for 15 model years of Mazda CX-9s between 2007 and 2023. Suspension Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Suspension Parts for my 2010 Mazda CX-9?

The cheapest 2010 Mazda CX-9 Suspension Parts we carry in stock are:

Gas Shock (11986755) – $24.99
Strut-Mate Front Suspension Strut Bumper and Bellows Kit (99985248) – $29.99
Suspension Control Arm Bushing (11453876) – $40.99
Shock Kit (11986842) – $44.99
Suspension Control Arm (11186683) – $45.49

What types of Suspension Parts do you sell for my 2010 Mazda CX-9?

As of 3/1/26, these are some of the most in-demand types of Suspension Parts for a 2010 Mazda CX-9:

Can I get help with 2010 Mazda CX-9 Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Suspension Parts and more.

What is your return policy for Mazda CX-9 Suspension Parts?

Advance Auto Parts keeps returns simple. For new Mazda CX-9 Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2010 Mazda CX-9 Suspension Parts

Suncore – Shock Kit (Part No.2-12S259720-001)

Monroe – OESpectrum Strut (Part No.72444)

Carquest Premium – COMPLET STRUT ASMBLY (Part No.18-920811)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-818296)

Monroe – Strut-Mate Suspension Strut Mount (Part No.908907)

Dorman – Suspension Control Arm (Part No.522-869)

Rare Parts – Control Arm (Part No.RP12946)

Rare Parts – Control Arm Bush (Part No.RP22481)

Rare Parts – Control Arm Bushing (Part No.RP22477)

MOOG – Suspension Control Arm Bushing (Part No.K201933)

MOOG – Suspension Control Arm Bushing (Part No.K201845)

Dorman – Suspension Lateral Arm (Part No.527-390)

Dorman – Suspension Control Arm (Part No.520-361)

Monroe – Strut-Mate Front Suspension Strut Bumper and Bellows Kit (Part No.63638)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920360)

Suncore – Complete Strut Assem (Part No.55S11706)

Monroe – Quick-Strut Front Right Suspension Strut and Coil Spring Assembly (Part No.182920)

Suncore – Gas Shock (Part No.12S259720)

Monroe – OESpectrum Suspension Shock Absorber (Part No.37331)

MANDO – SHOCK ABSORBER (Part No.MSS020406)

Suncore – Complete Strut Assem (Part No.55S11706)

Dorman – Suspension Control Arm (Part No.520-361)

Dorman – Suspension Control Arm (Part No.522-869)

MOOG – Suspension Control Arm Bushing (Part No.K200857)

Rare Parts – Control Arm (Part No.RP12946)

Rare Parts – Control Arm Bushing (Part No.RP22482)

Rare Parts – Control Arm Bushing (Part No.RP22477)

Rare Parts – Control Arm Bush (Part No.RP22481)

Monroe – Strut-Mate Front Suspension Strut Bumper and Bellows Kit (Part No.63638)

Suncore – Shock Kit (Part No.2-12S259720-001)

Monroe – OESpectrum Suspension Shock Absorber (Part No.37331)

Suncore – Quick Strut Kit (Part No.2-55S11705-001)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-818296)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-818295)

Suncore – Complete Strut Assem (Part No.55S11705)

Suncore – Gas Shock (Part No.12S259720)

Monroe – Strut-Mate Suspension Strut Mount (Part No.908907)

Monroe – OESpectrum Strut (Part No.72444)

MANDO – SHOCK ABSORBER (Part No.MSS020406)