2010 Mazda 3 Air Flow Sensors

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

• CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
• CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
• CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:

• Bosch OE quality pressure sensors for accurate measurements
• Bosch OE quality pressure sensors for long term stability
• Bosch OE quality pressure sensors with a short response time
• Bosch OE quality pressure sensors with improved media resistance

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

• CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
• CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
• CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
• PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
• OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
• EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
• EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
• ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
• ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
• PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
• OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
• EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
• EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
• ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
• ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement¿ and a first time fit.; DENSO gives you the right part and the right fit¿ the first time.

Product Features:

• Specifically designed to meet the increasing demands of today’s engines
• 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
• Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
• Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
• Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement¿ and a first time fit.; DENSO gives you the right part and the right fit¿ the first time.

Product Features:

• Specifically designed to meet the increasing demands of today’s engines
• 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
• Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
• Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
• Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement¿ and a first time fit.; DENSO gives you the right part and the right fit¿ the first time.

Product Features:

• Specifically designed to meet the increasing demands of today’s engines
• 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
• Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
• Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
• Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Application matched components ensures system operation in like new condition.