2010 Lincoln MKX Hubs and Hub Assemblies

Essential 2010 Lincoln MKX Hubs and Hub Assemblies

Timken – Wheel Hub Assembly (Part No.K7001338803TIM)

Wheel Hub Assembly

from

$218.28
Timken Wheel Hub Assembly is a single integrated unit that can be bolted directly onto corners, eliminating the need for conventional components like washers, spacers and nuts. Its design provides for lower total system cost, improved performance, reduced weight and lower warranty costs. The Formed Hub utilizes fewer components over conventional 4 x 2 designs, simplifying installation and reducing costs.

Product Features:
  • Allows the same configuration to be used on driven and non-driven wheels, replacing the conventional 4×2 (dead) spindle.
  • Features an advanced sensor and sensor technology for superb performance.
  • Holds bearing setting more consistently than traditional thread and nut designs. The resulting system stiffness reduces rotor run-out and improves brake performance.
  • Reduces weight by up to 20% per assembly compared to conventional wheel end solutions.
  • Features an active sensor capable of sensing down to zero speed. Sensor’s speed information can be used for vehicle dynamics control systems, speed control, speedometer, odometer, trip computer and other purposes.
  • Internally-mounted sensor protects against the elements, which ultimately reduces warranty costs. SENSOR-PAC also utilizes very small sensor-to-target wheel gaps, enabling a much smaller and more cost- effective sensor.
  • Includes an internally-mounted sensor that protects against debris, corrosion, thermal shock, and other hazards that threaten externally-mounted sensors.
  • Designed for superior performance in a minimal space. Timken engineers have packaged the sensor within the bearing without increasing overall dimensions to promote high performance and equal load carrying capacity in a minimum space.
See More

Motorcraft – Wheel Hub Assembly (Part No.K7001398289MTR)

Wheel Hub Assembly

from

$273.67
Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:
  • Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
  • Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
  • Special bearing seals to help keep out contaminants, the number one cause of bearing failure
  • Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
  • Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
  • Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
  • Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
  • Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
  • Integral bearing races specifically designed to each application, no one-size-fits-all solution
  • Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
  • Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
  • Original equipment specifications minimize any possibility of the hub cracking
  • Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
  • Tapered roller bearings for high load rates when specified
See More

Motorcraft – Wheel Hub (Part No.K7000282534MTR)

Wheel Hub

from

$63.10
Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:
  • Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
  • Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
  • Special bearing seals to help keep out contaminants, the number one cause of bearing failure
  • Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
  • Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
  • Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
  • Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
  • Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
  • Integral bearing races specifically designed to each application, no one-size-fits-all solution
  • Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
  • Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
  • Original equipment specifications minimize any possibility of the hub cracking
  • Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
  • Tapered roller bearings for high load rates when specified
See More

FEQ – Wheel Hub Assembly (Part No.K7001282535FEQ)

Wheel Hub Assembly

from

$63.31
FEQ manufactures OE quality wheel hub assemblies that provide heavy duty performance, improved fuel economy and reduced weight. FEQ wheel bearing hubs are maintenance free – fully lubricated and sealed for life.

Product Features:
  • Integrated sensors and electronics for reliable function
  • Factory sealed assembly eliminates contamination
  • No need for pre-load adjustment at assembly
  • Compact and lightweight
  • Minimizes axial space requirements
See More

MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.518517)

Hub and Bearing Assembly

from

$151.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
  • EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
  • CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

2010 Lincoln MKX Hubs and Hub Assemblies

Maybe you’re in the middle of a full rebuild of that 2010 Lincoln MKX. Maybe you just need a couple of Hubs and Hub Assemblies. Either way, Advance Auto Parts has 3 different Hubs and Hub Assemblies in our inventory ranging from $63.10 to $218.28. That means you can find the exact parts or products you need to keep that 2010 Lincoln MKX running smoothly.

Hubs and Hub Assemblies are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Lincoln MKX. Moog, Timken, and Motorcraft are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Hubs and Hub Assemblies for your 2010 Lincoln MKX, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Hubs and Hub Assemblies to keep your 2010 Lincoln MKX rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Hubs and Hub Assemblies Brands To Make Your 2010 Lincoln MKX Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Lincoln MKX demands trusted brand parts and products to keep it running. Many trusted brands of Hubs and Hub Assemblies make up Advance Auto Parts’ inventory, and all are ready to help make your MKX the best it can be. Be sure to browse some of our top Hubs and Hub Assemblies brands and parts.

Popular MOOG Hub Assemblies Hubs and Hub Assemblies

We carry MOOG Hub Assemblies parts in our stock across Wheel Hub Repair Kits categories, plus more. For a 2010 Lincoln MKX, our most popular MOOG Hub Assemblies Hubs and Hub Assemblies include:
Hub and Bearing Assembly
from $151.99
(1)
Hub and Bearing Assembly
Wheel Hub Repair Kits

FAQs for 2010 Lincoln MKX Hubs and Hub Assemblies

What are the most purchased Hubs and Hub Assemblies for the 2010 Lincoln MKX?

Out of 3 Hubs and Hub Assemblies for the 2010 Lincoln MKX, the most popular in our inventory are:
Wheel Hub Assembly
from $218.28
This product is not rated
Wheel Hub Assembly
Axle Hubs
Wheel Hub
from $63.10
This product is not rated
Wheel Hub
Axle Hubs