2010 Lincoln MKT Engine Parts

Below you will find various in-demand Lincoln Engine Parts, components and accessories for your 2010 MKT. Advance Auto Parts has popular MKT parts like Engine Gaskets and Seals, Valve Cover and Cylinder Heads, Engine Timing Parts and more. You’ll also find aftermarket and OEM Engine Parts for other MKT model years including 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2019 and more. Select a category of 2010 Lincoln MKT Engine Parts below and start saving instantly.

Popular 2010 Lincoln MKT Engine Parts Categories

Engine Variable Timing Solenoids

Valve Cover Gaskets

Engine Timing Chain Kits

Turbochargers and Parts

Oil Pumps

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Turbocharger Boost Sensors

Plenum Gasket Sets

Crankshaft Position Sensors

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Timing Cam Gears

Engine Mounts

Cylinder Head Temperature Sensors

Oil Pans

Engine Oil Cooler Accessories

Cylinder Head Gaskets

Full Gasket Sets

Crankshaft Seals

Turbocharger Oil Lines

Turbo Pressure Sensors

Timing Chain Tensioners

Intercoolers

Engine Oil Pump Pickup Tube and Screens

Timing Cover Repair Sleeves

Main Bearing Repair Sleeves

Timing Cover Seals

Engine Valve Stem Seals

Oversized Main Bearings

Standard Rod Bearing Sets

Standard Piston Rings

Turbocharger Oil Return Tubes

Timing Chain Guides

Engine Covers

Timing Crank Gears

Engine Variable Timing Solenoid Connectors

Remanufactured Engines

Engine Timing Chain Kit with Water Pump

Engine Assembly Lube

Engine Oil Pump Primers

Turbocharger Oil Line Adapters

Valve Train Set Up Spring Set

Engine Oil Pressure Indicator Connector

Turbocharger Oil Supply/Return Line Seal Kit

Essential Engine Parts for 2010 Lincoln MKTs

from

$99.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$37.49

Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineering protects the engine from dirt and contaminants
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$98.99

This direct replacement oil cooler matches the fit and function of the original equipment oil cooler for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles
Ideal solution – engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$7.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Validated for fit, form, and function
Engineered for the sealing repair environment
Unsurpassed quality you can trust

from

$28.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$10.99

This engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications. Level marks are clearly distinguished and properly gauged for accuracy.

Product Features:

Ideal replacement – this engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications
Ideal solution – level marks are clearly distinguished and properly gauged for accuracy
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$31.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$18.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Inputs from the camshaft, throttle position and crankshaft sensors provide the Powertrain Control Module (PCM) the information needed to make the vehicle perform efficiently.
The Throttle Position Sensor measures how much throttle is being applied; then the PCM tells the fuel injection system how much fuel is needed.
The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
Designed for long service life under harsh under-hood conditions.
Position sensors work in harmony with other emission sensors to help provide the best possible fuel economy and emissions.
Designed with OE electrical connectors ensuring proper fits.

from

$56.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$572.99

Rotomaster remanufactured Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these remanufactured, direct-replacement turbochargers.

Product Features:

All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
Each unit comes with a pre-lube syringe to ensure product protection during installation.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$11.79

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
For engines having a plenum chamber (upper intake manifold).
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$291.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$34.49

Engine Connecting Rod Bearing Set

from

$53.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$87.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to FORD 13-18; LINCOLN 13-16;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2013-2018
Weight approx: 5 Lbs
HYDRAULIC
PART GROUP: 3373, 3374, 3390

from

$4769.99

Reman Long Block

from

$72.99

Product Features:

Built with premium materials and OEM-matching connectors for plug-and-play compatibility, simplifying installation
Designed for consistent oil flow control to optimize camshaft timing, improving engine response and fuel efficiency
100% production-tested for fitment, leakage, maximum oil flow, and duty cycle, ensuring reliable performance under all conditions
Includes necessary attachment bolts, gaskets, O-rings, and guaranteed fitment with OEM wiring connectors to ensure proper installation and solenoid function
Supported by Cloyes limited warranty and technical support, providing peace of mind on every repair.

from

$39.99

The components in this convenient turbocharger oil supply return line seal kit are designed to help restore and ensure a secure seal between the turbo and the engine on specified vehicles. The kit includes parts that are engineered to match the performance of the original equipment, and contains one or more gaskets, O-rings or metal crush washers. Check the product description to select the right kit for your vehicle application.

Product Features:

Ideal solution – the components in this convenient turbo oil supply return line seal kit are designed to help restore and ensure a secure seal between the turbo and the engine on specified vehicles
Ensure fit – check the product description to select the right kit for your vehicle application
Direct replacement – includes parts that are engineered to match the performance of the original equipment, and contains one or more gaskets, O-rings or metal crush washers
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$12.99

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

from

$335.99

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, 3.5 Liter V6 Turbo Engine, All Aluminum

Product Features:

3.5 Liter V6 Turbo Engine, All Aluminum, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$11.99

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$15.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$17.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Designed to meet or exceed OEM performance requirements. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Designed to meet or exceed OEM performance requirements
Refer to our online catalog for detailed application-specific information

from

$81.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$436.99

ENGINE TIMING SET

from

$15.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$52.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Timing cover gasket set contains the timing cover seal and timing cover gasket(s) where required.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$12.49

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

Upgrade your 2010 Lincoln MKT with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2010 Lincoln MKT, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lincoln or enhancing its overall performance, Engine Parts are key to keeping your MKT functioning at its best. At Advance Auto Parts, we offer a wide selection of 130 Engine Parts for the 2010 Lincoln MKT, designed to meet your needs without breaking the bank. From Engine Gaskets and Seal replacements to Valve Cover and Cylinder Heads upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2010 Lincoln MKT at great prices. Our Engine Parts inventory for this model ranges from just $4.99 to $4,239.99, with an average price of $194.62. Our 130 Engine Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 2010 Lincoln MKT without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Lincoln MKT, we stock popular OEM and aftermarket Engine Parts from top names like Mahle, National, Imperial, and more. Mahle Engine Parts start at just $11.79 and boast an impressive 4.4 stars average rating from customers. National and Imperial also bring quality to the table, with Engine Parts available starting at $12.49, and at an average 4.3 stars rating. With 81 customer reviews and counting, our 2010 Lincoln MKT Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Lincoln MKT is always ready to roll. We’re committed to providing you with everything you need to keep your MKT in top shape, all in one place. Start shopping confidently below for your 2010 Lincoln MKT!

Best-Selling Engine Gaskets and Seals for 2010 Lincoln MKTs

Enhance the driving experience in your Lincoln with 12 quality Engine Gaskets and Seal components, starting at $11.79.

show more show less

from

$11.79

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
For engines having a plenum chamber (upper intake manifold).
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$62.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$26.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$115.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Valve cover gasket set contains all the gaskets required – may also contain spark plug tube seals and grommets if necessary.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$69.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Valve cover gasket set contains all the gaskets required – may also contain spark plug tube seals and grommets if necessary.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$68.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured to meet or exceed OEM specifications
Unsurpassed quality you can trust
Validated for fit, form, and function
Not intended for use in emission controlled vehicles.

from

$48.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$682.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$249.99

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$99.99

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$79.99

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications
Zero engine leakage for late model vehicles.

from

$52.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Timing cover gasket set contains the timing cover seal and timing cover gasket(s) where required.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Most Popular 2010 Lincoln MKT Valve Cover and Cylinder Heads

Customize your Lincoln with 12 Valve Cover and Cylinder Heads products like Cylinder Head Bolt Sets, Cylinder Head Gaskets, and Cylinder Head Gasket Sets, all priced under $525.99.

show more show less

from

$56.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$39.99

The Engine Cylinder Head Temperature Sensor provides an input to the engine control module concerning the engine operating temperature. Similar to the engine coolant temperature sensor input, the engine control module will make engine operating condition changes based on engine temperature.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$52.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Cylinder head gaskets are sold individually and may require new head bolts based on application.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$36.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$31.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$525.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
HANDLES EXTREME ENGINE CONDITIONS – Engineered and manufactured to inhibit over-compression of embossments to maintain a superior seal under peak combustion pressures and temperatures
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$291.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$61.99

Product Features:

PROPRIETARY NEXTGEN COATING TECHNOLOGY – Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
SUPERIOR SEAL – Precise embossed sealing beads at vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$52.99

Product Features:

PROPRIETARY NEXTGEN COATING TECHNOLOGY – Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
SUPERIOR SEAL – Precise embossed sealing beads at vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$27.99

This engine cylinder head temperature sensor is designed to match the fit, function and appearance of the original sensor on specified vehicles. It is engineered to help restore cylinder head temperature measurement function when an original sensor fails due to an internal short circuit, mechanical shock, or other damage.

Product Features:

Direct replacement – this engine cylinder head temperature sensor is designed to match the fit and function of an original sensor on specified vehicles
Ideal solution – engineered to help restore temperature sensor function when an original sensor fails as a result of electrical faults, shock, or other damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quaility – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.99

Approved materials for increased durability in even the most extreme temperatures. All Carquest Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
OE precision matched thermistor position for correct output parameters
Brass sensor housing precision machined to meet or exceed OE thermal conductivity

from

$12.99

Top Picks for 2010 Lincoln MKT Engine Timing Parts

Upgrade Lincoln MKTs with top-quality Engine Timing Parts parts, including 35 OEM and aftermarket selections for your 2010 model.

show more show less

from

$12.49

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$92.99

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$296.99

Timing Chain Kits includes all components for a quick and efficient replacement
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information

from

$55.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$44.49

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$315.99

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: 9-4226 Engine Timing Chain (1 EA), 9-4227 Engine Timing Chain (2 EA), S976T Engine Timing Camshaft Sprocket (2 EA), S977 Engine Timing Crankshaft Sprocket (1 EA), 9-5658 Engine Timing Chain Tensioner (1 EA), 9-5659 Engine Timing Chain Tensioner (1 EA), 9-5660 Engine Timing Chain Guide (1 EA), 9-5661 Engine Timing Chain Tensioner Guide (1 EA), 9-5662 Engine Timing Chain Guide (1 EA), 9-5663 Engine Timing Chain Guide (1 EA), 9-5664 Engine Timing Chain Tensioner (1 EA).

Product Features:

Timing Chain Kits includes all components for a quick and efficient replacement
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information

from

$319.99

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S976T Engine Timing Camshaft Sprocket (2 EA), 9-5663 Engine Timing Chain Guide (1 EA), WP103 Engine Water Pump (1 EA), 9-4226 Engine Timing Chain (1 EA), 9-4227 Engine Timing Chain (2 EA), 9-5660 Engine Timing Chain Guide (1 EA), 9-5661 Engine Timing Chain Tensioner Guide (1 EA), S977 Engine Timing Crankshaft Sprocket (1 EA), 9-5658 Engine Timing Chain Tensioner (1 EA), 9-5659 Engine Timing Chain Tensioner (1 EA), 9-5662 Engine Timing Chain Guide (1 EA), 9-5664 Engine Timing Chain Tensioner (1 EA).

Product Features:

Timing Chain Kits with Water Pump includes all components for a quick and efficient replacement
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information

from

$55.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Meet or exceed OEM performance requirements. Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience.

Product Features:

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$49.49

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Meet or exceed OEM performance requirements. Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience.

Product Features:

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$20.99

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, Timing Guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:

Extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information

from

$1011.99

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: 9-4226 Engine Timing Chain (1 EA), 9-4227 Engine Timing Chain (2 EA), 9-5658 Engine Timing Chain Tensioner (1 EA), 9-5659 Engine Timing Chain Tensioner (1 EA), 9-5660 Engine Timing Chain Guide (1 EA), 9-5661 Engine Timing Chain Tensioner Guide (1 EA), 9-5662 Engine Timing Chain Guide (1 EA), 9-5663 Engine Timing Chain Guide (1 EA), 9-5664 Engine Timing Chain Tensioner (1 EA), S976T Engine Timing Camshaft Sprocket (2 EA), S977 Engine Timing Crankshaft Sprocket (1 EA), VC114 Engine Variable Valve Timing (VVT) Sprocket (1 EA), VC115 Engine Variable Valve Timing (VVT) Sprocket (1 EA), VCB114 Engine Variable Valve Timing (VVT) Sprocket Bolt (2 EA), VTS114 Engine Variable Valve Timing (VVT) Solenoid (2 EA), WP103 Engine Water Pump (1 EA).

Product Features:

Timing Chain Kits with Water Pump includes all components for a quick and efficient replacement
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information

from

$942.99

Built on award-winning innovation, Cloyes Variable Valve Timing (VVT) kits deliver precision, performance, and a complete repair. Cloyes, a leader in timing systems since 1921, provides technicians with superior repair solutions. Our award-winning VVT Kits, including camshaft phasers (sprockets), solenoids and timing components, are engineered for precision, durability, and optimal engine performance. Cloyes VVT Kits offer complete repair solution with all necessary components included for an easy install. Made with premium-grade materials to ensure durability and longevity. Each part is production tested to ensure quality fit, function, and performance. Engineered for precise fitment, seamless operation, and easy installation and backed by Cloyes commitment to quality and reliability. SET INCLUDES: VC114 Engine Variable Valve Timing (VVT) Sprocket (1 EA), VTS114 Engine Variable Valve Timing (VVT) Solenoid (2 EA), 9-5659 Engine Timing Chain Tensioner (1 EA), 9-5664 Engine Timing Chain Tensioner (1 EA), VC115 Engine Variable Valve Timing (VVT) Sprocket (1 EA), 9-4226 Engine Timing Chain (1 EA), 9-5658 Engine Timing Chain Tensioner (1 EA), S976T Engine Timing Camshaft Sprocket (2 EA), VCB114 Engine Variable Valve Timing (VVT) Sprocket Bolt (2 EA), 9-4227 Engine Timing Chain (2 EA), 9-5660 Engine Timing Chain Guide (1 EA), S977 Engine Timing Crankshaft Sprocket (1 EA), 9-5661 Engine Timing Chain Tensioner Guide (1 EA), 9-5662 Engine Timing Chain Guide (1 EA), 9-5663 Engine Timing Chain Guide (1 EA).

Product Features:

OE-Quality: Manufactured using premium-grade materials to meet or exceed OE specifications ensuring durability and long-lasting performance.
Production Tested for individual part performance and system fit, reducing the risk of installation issues or comebacks
Complete Repair Kits: Includes gaskets, o-rings, and any necessary fasteners needed for a full, professional repair, reducing the risk of comebacks.
Backed by Limited Warranty and century-long reputation offering unmatched repair confidence in every component.
Refer to our online catalog for detailed application-specific information

from

$479.99

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket (2), Crankshaft Sprocket, Timing Chain, Secondary Chain (2), Chain Tensioner, Secondary Chain Tensioner (2), Tensioner Guide, Chain Guide (3)

from

$459.99

ENGINE TIMING SET

from

$397.99

ENGINE TIMING SET

from

$284.99

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Crankshaft Sprocket, Timing Chain (3), Chain Guide (5), Chain Tensioner (3), Tensioner Guide, Water Pump Does Not Contain Variable Valve Timing (VVT) Sprocket

from

$274.99

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Timing Chain, Secondary Chain (2), Chain Tensioner, Secondary Chain Tensioner (2), Tensioner Guide, Chain Guide (3) Does Not Contain Sprockets

from

$201.99

The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.

Product Features:

Direct replacement – this VVT sprocket fits and performs like the original sprocket
Durable construction – made from durable steel and precision machined for reliable performance
100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
Quality assured – vehicle-specific application has been validation tested to ensure quality

from

$189.99

VVT SPROCKET

from

$186.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$132.99

VVT SPROCKET

from

$97.99

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
The VVT solenoids meets the demands of today’s VVT engines at both low and high RPMs.
The VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
The VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
The VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
The VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
The VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.

from

$81.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$78.99

ENG TIMNG CHAINTNSNR

In-Demand Engine Mounts for 2010 Lincoln MKTs

Select from 2 premium Engine Mounts parts for your 2010 Lincoln MKT, with prices ranging from $121.99 to $179.99.

show more show less

from

$121.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to FORD 07-19; LINCOLN 07-19; MERCURY 08-09;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2007-2019
Weight approx: 5 Lbs
HYDRAULIC
REUSE BRACKET
THREADS: M12-1.50

from

$179.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to FORD 10-19; LINCOLN 10-19;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2010-2019
Weight approx: 4 Lbs
HYDRAULIC
INSERT ONLY
REUSE BRACKET

Most Sold 2010 Lincoln MKT Camshafts

Explore our best-selling Lincoln parts for the 2010 MKT among 5 OEM and aftermarket options starting from $18.99.

show more show less

from

$34.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$32.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$19.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$67.99

DENSO’s camshaft position sensors are manufactured to the strictest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s camshaft position sensors offer leading edge sensing technology which helps control ignition timing more precisely.

Product Features:

OE technology adapted for the aftermarket
Reduces emissions, increased performance
Delivers the highest reliability and detection accuracy

from

$18.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Inputs from the camshaft, throttle position and crankshaft sensors provide the Powertrain Control Module (PCM) the information needed to make the vehicle perform efficiently.
The Throttle Position Sensor measures how much throttle is being applied; then the PCM tells the fuel injection system how much fuel is needed.
The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
Designed for long service life under harsh under-hood conditions.
Position sensors work in harmony with other emission sensors to help provide the best possible fuel economy and emissions.
Designed with OE electrical connectors ensuring proper fits.

Top-Rated Engine Parts Brands For Your 2010 Lincoln MKT

Shop for the best-rated brands offering Engine Parts and other products for your 2010 Lincoln MKTs. Below you’ll find some of our best rated Engine Parts from Mahle, National, and Imperial, and more. Engine Parts from these brands that fit a 2010 MKT start at just $11.79 and are rated as high as 4.4 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Mahle 2010 Lincoln MKT Engine Parts

When it comes to maintaining or upgrading your 2010 Lincoln MKT, using quality Engine Parts is essential to ensure durability and a perfect fit. Mahle ticks all of those boxes. We offer a wide selection of Mahle Engine Parts, specifically designed for the 2010 Lincoln MKT. With over 1 Mahle brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.79. Plus, with over 8 customer reviews and an average rating of 4.4 stars, you can trust that our Mahle Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $11.79

(8)

Fuel Injection Plenum Gasket

“The Gasket worked like a Gasket just fine. But I have been sent e-mail after e-mail requesting to rate this part, too much, it’s become a nuisance.”

Popular National 2010 Lincoln MKT Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 2010 Lincoln MKT owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2010 MKT, Advance Auto Parts carries a full inventory of 2 National Engine Parts. Plus you will be keeping your Lincoln in peak condition while saving money because prices on these National Engine Parts range from $12.49 to $15.29, plus, with more than 5 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $15.29

(3)

Engine Crankshaft Seal

“Fit was fine for my 2007 Escape and no leaks since installing.”

from $12.49

(2)

Engine Harmonic Balancer Repair Sleeve

“This was needed for an off-label application, and has done the job perfectly. Service was outstanding, as always!”

FAQs for 2010 Lincoln MKT Engine Parts

Which Engine Parts are best-sellers for 2010 Lincoln MKTs?

Out of 130 Engine Parts that fit 2010 Lincoln MKTs, the following parts are the top sellers:

Engine Oil Dipstick: Direct Replacement, Stainless Steel (11093971) – $10.99
Engine Oil Filler Cap: Twist Lock, Direct Fit, Easy To Install, 1 Pack (11670564) – $11.99
Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (10049259) – $8.49

What’s the price range for 2010 Lincoln MKT Engine Parts?

Engine Part prices for the 2010 Lincoln MKT start at $4.99 and go up to $4,239.99 for the most premium parts.

What’s the average price of a Engine Part for a 2010 Lincoln MKT?

The average price for Engine Parts for the 2010 Lincoln MKT is $194.62. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Lincoln MKT model years?

Yes, we currently carry Engine Parts for 7 model years of Lincoln MKTs between 2011 and 2019. Engine Parts are bought most frequently for the following model years: 2019, 2017, 2016, 2015, 2014, 2013, 2012, and 2011.

What are the cheapest Engine Parts for my 2010 Lincoln MKT?

The cheapest 2010 Lincoln MKT Engine Parts we carry in stock are:

Engine Oil Cooler Seal (10308317) – $4.99
Multi-Purpose Seal (11035647) – $6.99
Stock Replacement Engine Assembly Lubricant, 4 oz. (50175373) – $6.99
General Seal (50206248) – $7.49
Turbocharger Inlet Gasket (11902636) – $7.99

What are the top-rated Engine Parts that fit the 2010 Lincoln MKT?

Out of 81 reviews by customers, our 2010 Lincoln MKT Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2010 Lincoln MKT and their top-rated products:

Engine Gaskets and Seals
- Fuel Injection Plenum Gasket (10307320) – $11.79
- Engine Valve Cover Gasket Set (10700409) – $62.99

What types of Engine Parts do you sell for my 2010 Lincoln MKT?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 2010 Lincoln MKT:

Can I get help with 2010 Lincoln MKT Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lincoln Engine Parts and more.

What is your return policy for Lincoln MKT Engine Parts?

Advance Auto Parts keeps returns simple. For new Lincoln MKT Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2010 Lincoln MKT Engine Parts

Felpro – Engine Conversion Gasket Set (Part No.CS 26543)

Melling – Stock Replacement Oil Pump Screen (Part No.398S)

Dorman – Engine Oil Cooler (Part No.918-970)

Felpro – Turbocharger Inlet Gasket (Part No.61777)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S995)

Dorman – Help – Engine Oil Dipstick: Direct Replacement, Stainless Steel (Part No.917-369)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26544 PT)

Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.DU-90)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71324)

Rotomaster – Remanufactured Turbocharger (Part No.K8430103R)

MAHLE Original – Fuel Injection Plenum Gasket (Part No.MS19557)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26543 PT-1)

Sealed Power – Engine Connecting Rod Bearing Set (Part No.6-5080A 25MM)

National – Shaft Repair Sleeve (Part No.99374)

Anchor – Engine Mount: Right, 1 Piece (Part No.3373)

Spartan – Reman Long Block (Part No.DFGA8)

Cloyes Gear – VVT SOLENOID (Part No.VTS116)

Dorman – Help – Turbocharger Oil Line Seals Kit (Part No.66248)

Melling Select Performance – Valve Train Set Up Spring (Part No.VTSS100)

KAI – Turbo Intercooler (Part No.CAC010025)

Carquest Premium – Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10144)

National – Engine Crankshaft Seal (Part No.482041N)

Cloyes Gear – Engine Timing Chain Guide (Part No.9-5687)

Carquest Premium – Multi-Use Connector (Part No.PTA3039)

INA US – ENGINE TIMING SET (Part No.ZC-76362)

Cloyes Gear – Engine Timing Chain (Part No.9-4227)

MAHLE Original – Engine Timing Cover Gasket Set (Part No.JV5183)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88187)

MAHLE Original – Fuel Injection Plenum Gasket (Part No.MS19557)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50767 R)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40729)

MAHLE Original – Engine Valve Cover Gasket Set (Part No.VS50684)

MAHLE Original – Engine Valve Cover Gasket Set (Part No.VS50490)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50884 R)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71327)

Felpro – Engine Gasket Set (Part No.260-3178)

Felpro – Engine Conversion Gasket Set (Part No.CS 26680)

Felpro – Engine Conversion Gasket Set (Part No.CS 26543)

Victor Reinz – Molded Rubber Valve Cover Gasket Set: Direct Fit, Includes Grommets, 32 Pieces (Part No.15-10742-01)

MAHLE Original – Engine Timing Cover Gasket Set (Part No.JV5183)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71324)

Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1292)

MAHLE Original – Engine Cylinder Head Gasket (Part No.54988)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26543 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26544 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26680 PT-1)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26543 PT-1)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26680 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26681 PT)

Dorman – Cylinder Head Temperature Sensor (Part No.926-711)

Carquest Premium – Cylinder Head Temperature Sensor (Part No.WTA2391)

Melling Select Performance – Valve Train Set Up Spring (Part No.VTSS100)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88187)

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1021)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 202, 50 Links, Timing Components, Without Sprockets (Part No.9-4226SX)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5664)

Cloyes Gear – Engine Timing Chain (Part No.9-4226)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 202, 50 Links, Timing Components, With Sprockets (Part No.9-4226S)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 202, 50 Links, Timing Components, Water Pump, & More (Part No.9-4226SWP)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5658)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5659)

Cloyes Gear – Engine Timing Chain Tensioner Guide (Part No.9-5661)

Cloyes Gear – TIMING CHAIN KIT (Part No.9-4226SK3)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 202, 50 Links, Timing Components, Phasers, Solenoids, & More (Part No.9-4226SVVT)

Dayco – TIMING CHAIN KIT (Part No.KTC1346)

INA US – ENGINE TIMING SET (Part No.ZC-9-4226S)

INA US – ENGINE TIMING SET (Part No.ZC-9-4226SX)

Dayco – TIMING CHAIN KIT (Part No.KTC1347)

Dayco – TIMING CHAIN KIT (Part No.KTC1384)

Dorman – Camshaft Phaser – Variable Timing Camshaft Gear (Part No.917-260)

Cloyes Gear – VVT SPROCKET (Part No.VC114)

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1309)

Cloyes Gear – VVT SPROCKET (Part No.VC115)

NTK – Engine Variable Valve Timing (VVT) Solenoid (Part No.VV0001)

Carquest Premium – Multi-Use Connector (Part No.PTA3039)

INA US – ENG TIMNG CHAINTNSNR (Part No.ZT-9-5664)

Anchor – Engine Mount: Right, 1 Piece (Part No.3180)

Anchor – Engine Mount: Right, 1 Piece (Part No.3305)

Carquest Premium – Camshaft Sensor (Part No.CSC1147)