2010 Jeep Wrangler Bumpers

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Plastic
• OE Style
• Direct Fit
• Left Side
• Limited 5 Year Warranty

This three inch round black plastic tubular bumper end caps from Rugged Ridge presses in easily and will replace your missing caps for a completed look. Will fit most three inch tube bumpers. Sold individually.

Product Features:

• Black Plastic
• Press In
• Will Fit Most 3 in. Tube Bumpers
• Sold Individually
• Limited 5 Year Warranty

New Standard Replacement Front Bumper Cover Molding [Applique] Prime/Paint To Match Finish

Product Features:

• Made Of Olefinic Thermoplastic Elastomer
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Rear Bumper End

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Front Bumper End

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Rear Bumper End

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Westin(TM) MAX(TM) Winch Mounting Systems are made to maximize your options for functional style. The MAX(TM) Winch Tray is suitable for the mounting of most major brand winches. The MAX(TM) System gives you the option of adding a MAX(TM) Bull Bar/Light B

Product Features:

• Features 3 in. Tube
• Accommodates Three 8 in. Lights
• No Drill Installation
• Winch Tray Sold Separately
• 3 Year Warranty

New Standard Replacement Driver Or Passenger Side Front Bumper Guard

Product Features:

• Made Of Rubber, Poly(Acrylic Acid Ester)
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The all new JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The base unit was developed around our XRC platform and comes standard with a winch cradle with capacity to support up to a 15,000 Pounds winch. Its also equipped with D Ring mounts that are welded on the inside and out that provides a towable anchor when pulling your rig behind a truck or motor home. Choose between our mid or full width end plate knowing that bumper clearance would not be sacrificed when wheeling in the harshest conditions. Then decide which over rider you prefer, you can choose between our low profile bull bar or our high point stinger.

Product Features:

• Bolt On Mounting
• With Light Mounting Tabs
• Manufactured From 3/16 Inch Cold Rolled Steel. Solid D Ring Mounts Welded Inside And Out
• Multi Piece Options Allow You To Build Your Bumper In Any Configuration For Any Situation
• Built In Winch Plate To Accommodate Up To A 15K Winch

Are you looking for protection or Rugged Ridge D rings? This pair of European styled XHD bumper tow point covers feature a hard-wearing injection molded plastic design that matches the factory one for an overall integrated look. For use with 11540.10 and

Product Features:

• Textured Black
• European Style
• Easily Removable
• Limited 5 Year Warranty

New Standard Replacement Front Bumper To Body Filler Panel, Plastic [Upper Cover]

Product Features:

• Plastic [Upper Cover], Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The XHD Aluminum Bumper System was designed for a whole new look while being extremely lightweight. The bumper is all aluminum but uses the current steel XHD D-rings and comes with a built in top filler plate.

Product Features:

• Aluminum
• Front

Spartan Front Bumper

Westins WJ2 Full Width Front Bumper is constructed with 3/16-inch plate steel. With Westins new WJ2 Full Width Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! It is designed to utilize both styles of factory fog lights or round post lights. Features Rock Light mount points on lower bumper corners, holes to hide light harness wires, and 2 front off-road jack points. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

The ARIES TrailCrusher Jeep bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring a winch and shackle rating of 12,500 lbs. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep bumper is designed to maximize its strength and utility. It is built with 3/16″ thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4″ thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. winch and shackle rating, but it also offers excellent versatility. The winch platform of the bumper features industry-standard mounting holes to accept most types of winches, and the shackle mounts accept any pin up to 7/8″ in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of winch accessories are also available, including a hawse fairlead #2156070 and roller fairlead #2156071. For added winch protection and an aggressive look on the Jeep JL / JT, this bumper also comes with a stinger-style angular brush guard. The TrailCrusher bumper is fast and easy to install, integrating with the Jeep Wrangler JL or Jeep Gladiator like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8″ steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear TrailCrusher bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation (see application info to verify fitment with your Jeep).

Product Features:

• Winch and shackle ratings of 12,500 lbs. for ultimate off-road functionality
• Standard winch mounting platform accepts most types of winches
• Welded shackle mounts and 1/4″ thick sleeves provide reliable anchoring points
• Shackle mounts accept pins up to 7/8″ in diameter (#2166071 recommended)
• No-drill install uses factory mounting points with no pump relocation required
• One-piece construction with 3/16″ thick, all-steel plates for maximum strength
• Narrow width and high ground clearance for an improved off-road-style design
• Highly durable carbide black powder coat with rust-resistant E-coat finish
• Angular brush guard helps protect the winch and adds an aggressive look
• Center round cutouts accept OE bumper lights
• Includes mounting hardware and 3/8″ thick brackets for solid installation

Westins Rear Bumper is constructed with 3/16-inch plate steel. This clean, stylish bumper is designed to work with factory or Westin hitches and features a bottom frame mount that prevents the bumper from rotating. Our Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Includes 2 off-road jack points. Product includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Westins WJ2 Stubby Bumper with Bull Bar is constructed with 3/16-inch plate steel and fits most double or single row 20 light bars. The Bull Bar on our new WJ2 Stubby Bumper is designed to mount and protect your light bar. With our new WJ2 bumper product, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Bumper features Rock Light mount points on the lower corners of the bumper, 2 side and 2 front off-road jack points, and holes to hide light harness wires. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Optional skid plate sold separately. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Westins WJ2 Rear Bumper with Tire Carrier is constructed with 3/16-inch plate steel with an 8 gauge tire carrier. The tire carrier is designed to work with or without factory or Westin hitches, and opens and closes with the tailgate. Tapered roller bearings and 2 turnbuckle heim links improve carrier rigidity while its bolt-on spindle allows adjustment of the carrier separate from the bumper. Features integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Includes 2 off-road jack points, license plate locator, trailer plug, fender gap transition plates, camera back-up relocator and more. Offers a bottom frame mount that helps prevents the bumper from rotating. Product includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

The ARIES TrailCrusher Jeep bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring winch and shackle capabilities with a 12.5K rating. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep bumper is designed to maximize its strength and utility. It is built with 3/16″ thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4″ thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. winch-and-shackle rating, but it also offers excellent versatility. The winch platform of the bumper features industry-standard mounting holes to accept most types of winches, and the shackle mounts accept any pin up to 7/8″ in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of winch accessories are also available, including a hawse fairlead #2156070, roller fairlead #2156071 and winch fairlead mount #15600FB. For added winch protection and an aggressive look on the Jeep JL, a stinger-style angular brush guard #2156050 is available. The TrailCrusher bumper is fast and easy to install, integrating with the Jeep Wrangler JL like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8″ steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear ARIES one-piece bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation and is covered by a three-year warranty.

Product Features:

• Shackle rating of 12,500 lbs. for ultimate off-road functionality
• Welded shackle mounts and 1/4″ thick sleeves provide reliable anchoring points
• Shackle mounts accept pins up to 7/8″ in diameter (#2166071 recommended)
• No-drill install uses factory mounting points
• One-piece construction with 3/16″ thick, all-steel plates for maximum strength
• Narrow width and high ground clearance for an improved off-road-style design
• Highly durable carbide black powder coat with rust-resistant E-coat finish
• Center cutout for rear mount trailer hitch receiver tube
• Includes mounting hardware and 3/8″ thick brackets for solid installation

Westins WJ2 Rear Bumper is constructed with 3/16-inch plate steel and features 2 off-road jack mount points. This clean, stylish bumper is designed to work with factory or Westin hitches. Our WJ2 Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Bolt on installation so no drilling is required. Includes bumper, mounting hardware and install instructions.

Product Features:

• 3/16-Inch Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points
• Rock Light Mount Points
• 2 Off-Road Jack Points
• No Drilling Required – Bolt On Installation
• Includes Bumper; Mounting Hardware And Install Instructions

Westins WJ2 Rear Bumper is constructed with 3/16-inch plate steel. This clean, stylish bumper is designed to work with factory or Westin hitches and features a bottom frame mount that prevents the bumper from rotating. Our WJ2 Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Includes 2 off-road jack points, license plate locator, trailer plug, fender gap transition plates, camera back-up relocator and more. Product includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

New CAPA Certified Premium Replacement Front Bumper Cover Reinforcement Bar

Product Features:

• Made Of High Strength Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle