2010 Jeep Wrangler Air Suspension and Kits

While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:

• Controls Two Air Springs Simultaneously
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)

While your car, truck, or SUV depends on Firestone Ride-Rite (TM) air springs to deliver in-cabin comfort, confidence, and control, you turn to Firestone Air Command (TM) products to take your experience to the next level. You count on air accessories like the Air Command Heavy-Duty Air Compressor System with Single Analog Gauge. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge makes inflating or deflating your air springs easy with the touch of a button. It provides an on-the-spot air source to your vehicle suspension system, letting you modify your springs to match the load and driving conditions. Firestone Air Command Heavy-Duty Air Compressor System with Single Analog Gauge, in particular, features a handful of distinct advantages. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge’s easy installation is chief among them, so you can get it hooked up and hop on the road in no time. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for uncluttered routing of power supply and lines.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Heavy-Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 30 Percent Duty Cycle, 0.40 CFM)

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

• The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
• The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
• Easy Installation

aFe Power is proud to introduce the all new “Glide Guard” On-Board Compressor & Tank Mount. The Glide Guard comes powder-coated in a matte black finish with counter-sunk compressor & tank mounting holes for protection. Once the required aFe left side exit exhaust system (sold separately) is installed, the skid plate mounts neatly in the former factory muffler location tucking your air compressor and tank as high as possible (air compressor and tank not included). The Glide Guard is constructed out of 3/16″ thick steel to withstand extreme off-road conditions. This system bolts in utilizing factory locations and an additional 4 drilled holes with heavy-duty nut plates for a hassle-free install.

Product Features:

• 3/16 in. Thick Steel For Strength And Rigidity
• Maximum Corrosion Protection
• Counter Sunk Compressor
• Factory Attachment Points

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. Also included are rear coil springs that provide 1″-2″ of lift. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

2.5 Factory Shock

3.0 Bypass Shock

2.0 Perf Shock

Spacer Lift Kit- 1.7

Comfort Ride kits are specially designed to work with stock suspension components to keep costs down and quality high. High-density Progressive Polyurethane strut and spring spacers act as isolators to combine moderate amounts of lift without losing the comfortable ride you have come to expect. In torsion bar applications, re-indexed torsion keys allow you to dial-in the desired amount of lift in order to plus-size tire and wheel packages. These front lifts are often combined with Daystar Greaseable Super Shackles, add-a-leafs, or blocks and U-bolts to provide complete front and rear kits.

Product Features:

• High Density Progressive Polyurethane
• Lifts Vehicle Without Sacrificing Ride Quality Or Load-Carrying Capacity
• No Metal On Metal Contact
• Upper Coil/Strut Spacer Maintain A Near Factory Ride

Designed by a dedicated team of Jeep enthusiasts, the ORV suspension program is one of the most complete programs available. We have looked at each application in detail to provide the very best and most complete solution for your specific Jeep model. Sin

Product Features:

• Black Powder Coated
• 2 in. Lift
• Smooth Ride
• Direct Fit
• Limited 5 Year Warranty

Skyjacker new lift systems for the NEW Jeep Wrangler JL and Rubicon feature DUAL RATE-LONG TRAVEL coil springs designed specifically for the JL to ensure superb highway ride quality and performance on any terrain – whether on-road or for off-road use. Choose your preference from either M95 Monotube or Black Max Front and Rear Long Travel shocks for proper suspension and ride control of the new Wrangler JL.

Product Features:

• The DUAL RATE-LONG TRAVEL Coil Springs Offers The Best Of Both Worlds From The Street To The Trail! The 1st Spring Rate Offers An Exceptional Highway Ride
• The Coils Will Expand When Off-Roading During Articulation As The Suspension Droops To Keep The Tires In Contact With The Ground Much Longer Than A Single Rate Coil
• This Results In A Smoother Ride While Maintaining The Coil In The Upper Coil Bucket Even At Full Droop
• The 2nd Rate (Lower Coils) Only Engage After Compression Past The 1st Rate, This Second Rate Allows Consistent Control And Stability During Body Roll And Heavy Off-Road Suspension Movement
• Systems Feature Extended Sway Bar End Links Which Allow For Full Droop And Long Travel As Well As Bump Stop Extensions To Make Sure The Suspension Clears The Tires At Bump
• Long Travel Front And Rear Shocks Are Length Fitted To Offer The Maximum Extension Allowable For Full Articulation To Complete This Total Package
• Lift Kit Suspension Include, Front And Rear Dual Rate, Long Travel Coil Springs: Front And Rear Extended Sway Bar End Links: Front And Rear Bump Stop Extensions
• Lift Kit Suspension Include, Front And Rear Black MAX Or M95 Monotube Long Travel Shocks: Grade 8 Mounting Hardware

Get your 4-door Jeep® Wrangler JL Unlimited ready for a day on the trail with the Rancho® 2-in. to 3.5-in. Sport suspension system. This premium suspension system features Rancho RS9000®XL front and rear shocks that allow customized damping control.

Product Features:

• ORDERING INFO –Box 1 of 2for master kitRS66124BR9, must order RS66124BR9-1 and RS66124BR9-2 for a complete kit
• COMPATIBILITY — Designed for 4-door Jeep Wrangler JL Unlimited (excludes diesel, non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 35-in. tires, get 2-in. to 3.5-in. of additional ground clearance needed for a day of rock crawling, trail riding and on-road driving (bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Includes four Rancho RS9000®XL shocks, front and rear corner-specific progress rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
• NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility while Dynamic Rebound Spring (DRS) delivers additional control
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads while brackets are fabricated from high-strength, low-alloy steel for long life
• COMPLETE PERFORMANCE UPGRADE — Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B), sold separately
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 35-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)

Get your 2-door Jeep® Wrangler JL ready for a day on the trail with the Rancho® 3-in. Sport suspension system. This premium suspension system features Rancho RS9000®XL front and rear shocks that allow customized damping control.

Product Features:

• ORDERING INFO — Box 2 of 2 for master kit RS66121BR9, must order RS66121BR9-1 and RS66121BR9-2 for a complete kit
• COMPATIBILITY — Designed for 2-door Jeep Wrangler JL (non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 35-in. tires, get 3-in. of additional ground clearance needed for a day of rock crawling (may require trimming for 35-in. tires, aftermarket bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Includes four Rancho RS9000®XL shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
• NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads
• COMPLETE PERFORMANCE UPGRADE — Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B), sold separately
• ENGINEERED TO LAST — Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
• NOTES — Compatible with Jeep factory electronic stability system, allows the use of OE wheels and tires (tire size varies between manufacturers)

Get your 2-door Jeep® Wrangler JL ready for a day on the trail with the Rancho® 3-in. Sport suspension system. This premium suspension system features Rancho RS9000®XL front and rear shocks that allow customized damping control.

Product Features:

• COMPATIBILITY — Designed for 2-door Jeep Wrangler JL (non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 35-in. tires, get 3-in. of additional ground clearance needed for a day of rock crawling (may require trimming for 35-in. tires, aftermarket bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Includes four Rancho RS9000®XL shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
• NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• ORDERING INFO — Ships in two boxes, order RS66121BR9-1 and RS66121BR9-2 for a complete kit
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads
• COMPLETE PERFORMANCE UPGRADE — Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B), sold separately
• ENGINEERED TO LAST — Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
• NOTES — Compatible with Jeep factory electronic stability system, allows the use of OE wheels and tires (tire size varies between manufacturers)

Get your 4-door Jeep® Wrangler JL Unlimited ready for a day on the trail with the Rancho® 2-in. to 3.5-in. Sport suspension system. Features Rancho RS5000®X front and rear shocks that provide additional control and reduce body roll.

Product Features:

• ORDERING INFO — Box 1 of 2 for master kit RS66124BR5, must order RS66124BR5-1 and RS66124BR5-2 for a complete kit
• COMPATIBILITY — Designed for 4-door Jeep Wrangler JL Unlimited (excludes diesel, non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 35-in. tires, get 2-in. to 3.5-in. of additional ground clearance needed for a day of rock crawling, trail riding or on-road driving (bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Includes four Rancho RS5000®X shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
• ENHANCED CONTROL — Rancho RS5000®X shocks with Dynamic Rebound Spring (DRS) technology provides additional control, reduces body roll and prevents rod overextension inside the shock
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads while brackets are fabricated from high-strength, low-alloy steel for long life
• COMPLETE PERFORMANCE UPGRADE — Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B), sold separately
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 35-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)

Once installed, this red bushing kit provides better handling and control of your Wrangler for a better overall performance. They are made of polyurethane which is a stronger, more shock absorbing replacement than rubber and lasts for as long as you need

Product Features:

• Polyurethane
• OE Style
• Better Handling and Control
• Long-lasting
• Limited 5 Year Warranty

MasterBshKt

Product Features:

• Incredible Improvement in Control
• Maintains Proper Caster and Camber Alignment
• Increase in Handling and Control
• Greatly Reduce Wheel Hop on Quick Acceleration
• Even Braking Control is Improved
• Better Suspension Stability

Product Features:

• Incredible Improvement in Control
• Maintains Proper Caster and Camber Alignment
• Increase in Handling and Control
• Greatly Reduce Wheel Hop on Quick Acceleration
• Even Braking Control is Improved
• Better Suspension Stability

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

POWER STEERING FLUID