2010 Jaguar XK Oil and Lubricants

Essential Oil and Lubricants for 2010 Jaguar XKs

FRAM – 5W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 1 Quart (Part No.F620)

5W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 1 Quart

from

$6.49
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

Valvoline – Advanced Full Synthetic 5W-30 Engine Oil, Maximizes Engine Life, 1 Quart (Part No.VV955)

Advanced Full Synthetic 5W-30 Engine Oil, Maximizes Engine Life, 1 Quart

from

$11.49
Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:
  • Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
  • 40% better wear protection vs. industry standard as tested in the sequence ivb engine test
  • 25% better deposit protection with superior engine cleaning detergents as tested in the gmod engine test
  • Exceptional high/low temperature protection defends your motor no matter the weather conditions
  • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn, gm dexos 1 gen 3
  • Superior engine protection: Valvoline SynPower Full Synthetic Engine Oil provides superior protection against engine sludge and varnish, ensuring your engine stays clean and running smoothly.
See More

FRAM – High Mileage 5W-30 Conventional Motor Oil, Restores Seals, 5 Quart (Part No.F660-5QT)

High Mileage 5W-30 Conventional Motor Oil, Restores Seals, 5 Quart

from

$24.99
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
See More

Castrol – GTX High Mileage 5W-20 Synthetic Blend Motor Oil, Reduces Sludge & Wear, 1 Quart (Part No.15B6E6)

GTX High Mileage 5W-20 Synthetic Blend Motor Oil, Reduces Sludge & Wear, 1 Quart

from

$9.49
Castrol® GTX® High Mileage 5W-20 Synthetic Blend Motor Oil is the ultimate choice for extending engine life in high-mileage vehicles. Engineered with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage. This premium synthetic blend offers superior dispersancy to combat sludge buildup, exceptional protection against oil burn-off, and advanced additives to minimize engine wear. Seal conditioners work to reduce leaks, while its formulation improves fuel economy, meeting stringent API SP, ILSAC GF-6, and Ford specifications. Designed to exceed industry standards, this 5W-20 motor oil ensures reliable performance and durability, making it a smart investment for maintaining your vehicle’s efficiency and longevity.

Product Features:


    Product Features:
    • Phosphorus Replacement Technology helps extend emission system life
    • Superior dispersancy that fights sludge build up
    • Exceptional oil burn-off protection exceeding industry standards (1)
    • Seal conditioners to help reduce leaks
    • Advanced additives that minimize engine wear
    • Improved fuel economy (2)
    • (2) Based on API and ACEA volatility specifications
    • (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
    • Meets or exceeds the following specifications:
    • API SP/SN PLUS/SN/SM
    • ILSAC GF-6
    • Meets Ford WSS-M2C945-B1
    • Meets Ford WSS-M2C960-A1
See More

FRAM – 0W-20 Full Synthetic Motor Oil, Faster Oil Flow, 1 Quart (Part No.F900)

0W-20 Full Synthetic Motor Oil, Faster Oil Flow, 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 0W-20 and is a fully licensed GM dexos1 Gen 2 motor oil.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability, Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 0W-20 is formulated with high-quality synthetic base stocks and the latest additive technology to meet stringent API and ILSAC specifications, ensuring top-tier protection for your engine.
  • Advanced LSPI Prevention: Specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, reducing the risk of premature engine failure.
  • Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, offering broad application across various engine types.
  • GM dexos1 Gen 2 Licensed: Fully licensed as GM dexos1 Gen 2 motor oil, ensuring it meets the high standards required for modern engines, including those from General Motors.
See More

Castrol – Edge 5W-40 Full Synthetic Motor Oil, Maximizes Engine Performance, 5 Quart (Part No.15B6FE)

Edge 5W-40 Full Synthetic Motor Oil, Maximizes Engine Performance, 5 Quart

from

$37.99
Castrol EDGE Euro 5W-40 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:


    Product Features:
    • 1.2X Better viscosity control to help engines run better for longer (1)
    • 2X Better engine cleanliness to help maximize engine performance (1)
    • (1) As measured in DV6 test vs. test limit
    • Approved and licensed specifications:
    • ACEA A3/B4
    • API SP
    • BMW Longlife-01
    • Porsche A40
    • MB-Approval MB 229.5
    • Renault RN0700 / RN0710
    • VW 502 00 / 505 00
    • Meets engine test requirements of Chrysler MS 12991
See More

FRAM – High Mileage 5W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F923-5QT)

High Mileage 5W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart

from

$27.99
FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Protection for High Mileage Engines: Designed for engines with over 75,000 miles, this oil provides the ultimate protection, making it ideal for higher mileage vehicles.
  • Advanced LSPI Prevention Technology: Contains additive technology to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines, helping to prevent premature engine fai
See More

FRAM – High Mileage 0W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 1 Quart (Part No.F913)

High Mileage 0W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 1 Quart

from

$7.49
FRAM Full Synthetic High Mileage SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 0W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 0W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

FRAM – High Mileage 5W-30 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F933-5QT)

High Mileage 5W-30 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart

from

$27.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

FRAM – 5W-20 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 1 Quart (Part No.F610)

5W-20 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 1 Quart

from

$6.49
FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W20 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

Castrol – Edge 5W-30 Full Synthetic Motor Oil, Superior Wear Protection, 5 Quart (Part No.1598B1)

Edge 5W-30 Full Synthetic Motor Oil, Superior Wear Protection, 5 Quart

from

$37.99
Castrol EDGE 5W-30 Full Synthetic Motor Oil is engineered for drivers seeking peak engine performance and unmatched protection. With a formula that is 3X stronger against viscosity breakdown and delivers 10X better high-stress performance, this oil ensures your engine operates smoothly under demanding conditions. Designed for extended use, it offers up to 20,000 miles or one year between oil changes, making it a cost-effective choice for long-term reliability. Its advanced composition exceeds API SQ/SP/SN PLUS/SN standards and meets stringent requirements from Chrysler and Ford, ensuring compatibility with a wide range of vehicles. The 5W-30 weight provides optimal viscosity control and thermal stability, enhancing fuel economy and safeguarding against sludge buildup. Whether you’re navigating high temperatures or heavy loads, this full synthetic oil delivers superior wear protection and performance in critical areas, making it the ultimate solution for maintaining your engine’s health and efficiency.

Product Features:


    Product Features:
    • 3X Stronger than the leading full synthetic (1)
    • 10X Better high stress performance (2)
    • 20,000 miles between oil changes (3)
    • (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
    • (2) As measured in Seq IX test under high load/torque conditions vs. API SQ test limits
    • (3) Or one year, whichever comes first
    • Approved and Licensed Specifications:
    • Exceeds API SQ/SP/SN PLUS/SN
    • ILSAC GF-7
    • Meets engine test requirements of Chrysler MS 6395
    • Meets Ford WSS-M2C945-B1
    • Meets Ford WSS-M2C960-A1
    • Meets Ford WSS-M2C961-A1
See More

Royal Purple – 0W-40 Full Synthetic Motor Oil, Improves Performance, 1 Quart (Part No.11484)

0W-40 Full Synthetic Motor Oil, Improves Performance, 1 Quart

from

$12.99
Royal Purple’s API-licensed Synthetic Motor Oil combines premium base oils with proprietary additive technologies to create high-performance motor oils that optimize engine performance. This synthetic oil offers better wear protection, increased fuel efficiency, and superior corrosion protection. It also ensures better protection of the expensive catalytic emission system and improved compatibility with fuels containing ethanol. Meeting ILSAC GF-5 and Dexos1 performance requirements, this oil is ideal for both gasoline and diesel engines, delivering superior protection and enhanced performance.

Product Features:
  • Better wear protection
  • Increased fuel efficiency
  • Better protection of the expensive catalytic emission system
  • Improved compatibility with fuels containing ethanol
  • Superior corrosion protection
  • Enhanced Engine Performance: Royal Purple’s Synthetic Engine Oil SAE 0W-40 combines premium base oils with proprietary additive technologies to optimize engine performance.
See More

FRAM – 0W-40 Full Synthetic Motor Oil, Exceptional Film Strength, 1 Quart (Part No.F904)

0W-40 Full Synthetic Motor Oil, Exceptional Film Strength, 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 0W-40 is a premium full synthetic motor oil formulated employing the latest additive technology to provide the ultimate protection for your engine. It is designed to deliver increased fuel efficiency and deposit protection even under severe service conditions. This engine oil meets the performance requirements of American, Japanese or European gasoline or diesel-fueled passenger cars, light trucks and sport utility vehicles, including gasoline-electric hybrids. FRAM Engine Oil Full Synthetic SAE 0W-40 exceeds the demanding engine performance requirements of today’s modern, higher revving sports, performance, and luxury vehicles. It helps maximize engine performance and improve engine efficiency while protecting turbochargers and emission control system catalysts. FRAM Engine Oil Full Synthetic 0W-40 meets the requirements of ACEA A3/B4 and API SP.

Product Features:
  • Exceptional Film Strength.
  • Excellent Protection for Metal Components from Rust, Corrosion and Wear.
  • Superior Oxidation Stability.
  • Outstanding Shear Stability.
  • Improved fuel economy.
  • Reduces fuel costs without sacrificing engine protection.
  • LSPI (Low Speed Pre-Ignition) Protection Throughout the Drain Interval.
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: Formulated with the latest additive technology, FRAM Engine Oil Full Synthetic SAE 0W-40 provides superior protection for your engine, ensuring longevity and reliability.
  • Superior Performance Under Severe Conditions: This engine oil offers exceptional deposit protection and performance even under severe service conditions, making it ideal for high-stress driving environments.
  • Versatile Compatibility: Meets the performance requirements of American, Japanese, and European gasoline or diesel-fueled passenger cars, light trucks, sport utility vehicles, and gasoline-electric hybrids.
  • Exceeds Modern Engine Standards: Exceeds the demanding engine performance requirements of today’s modern, higher revving sports, performance, and luxury vehicles, while also protecting turbochargers and emission control system catalysts.
See More

Castrol – Edge 0W-40 Full Synthetic Motor Oil, Exceeds Manufacturer Standards, 1 Quart (Part No.15B5FD)

Edge 0W-40 Full Synthetic Motor Oil, Exceeds Manufacturer Standards, 1 Quart

from

$11.99
Castrol EDGE Euro 0W-40 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:


    Product Features:
    • 1.5X Better viscosity control to help engines run better for longer (1)
    • 1.5X Better piston cleanliness to help maximize engine performance (2)
    • (1) As measured in DV6 test vs. test limits
    • (2) As measured in EP6CDT test vs. test limits
    • Approved and licensed specifications:
    • ACEA A3/B4
    • API SP
    • MB-Approval 229.5
    • BMW Longlife-01
    • Porsche A40
    • Renault RN0700 / RN710
    • VW 502 00 / 505 00
    • Meets Ford WSS-M2C937-A
See More

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon

from

$59.99
Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the No. 1 gear oil brand.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Upgrade your 2010 Jaguar XK with Top-Quality Oil and Lubricants

When it comes to maintaining or upgrading your 2010 Jaguar XK, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jaguar or enhancing its overall performance, Oil and Lubricants are key to keeping your XK functioning at its best. At Advance Auto Parts, we offer a wide selection of 10 Oil and Lubricants for the 2010 Jaguar XK, designed to meet your needs without breaking the bank. From Lubricant replacements to Motor Oil upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Oil and Lubricants for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Oil and Lubricants for your 2010 Jaguar XK at great prices. Our Oil and Lubricants inventory for this model ranges from just $6.49 to $65.99, with an average price of $28.24. Our 10 Oil and Lubricants in stock come from 3 trusted brands, so you’re sure to find the right part for your 2010 Jaguar XK without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Jaguar XK, we stock popular OEM and aftermarket Oil and Lubricants from top names like Royal Purple Valvoline, and more. Royal Purple Oil and Lubricants start at just $11.99 and boast an impressive 4.8 stars average rating from customers. With 463 customer reviews and counting, our 2010 Jaguar XK Oil and Lubricants have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Oil and Lubricant upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 2010 Jaguar XK is always ready to roll. We’re committed to providing you with everything you need to keep your XK in top shape, all in one place. Start shopping confidently below for your 2010 Jaguar XK!

Best-Selling Lubricants for 2010 Jaguar XKs

Enhance the driving experience in your Jaguar with 1 quality Lubricant components, starting at $59.99.

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon

from

$59.99
Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the No. 1 gear oil brand.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Most Popular 2010 Jaguar XK Motor Oils

Customize your Jaguar with 9 Motor Oil products like Engine Oil, all priced under $65.99.

Royal Purple – High Performance 5W-20 Synthetic Motor Oil, Boosts Horsepower, 5 Quart (Part No.51520)

High Performance 5W-20 Synthetic Motor Oil, Boosts Horsepower, 5 Quart

from

$41.99
Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:
  • Better wear protection
  • Increased fuel efficiency
  • Better protection of the expensive catalytic emission system
  • Improved compatibility with fuels containing ethanol
  • Enhanced Performance: Royal Purple Motor Oil with Synerlec« additive technology reduces friction, resulting in a 1-3 percent increase in horsepower.
  • Superior Protection: Provides superior corrosion protection, ensuring the longevity and reliability of your engine.
  • Extended Oil Life: Extends oil life, reducing the frequency of oil changes and maintenance costs.
  • Versatile Application: Suitable for use in gasoline and diesel engines of all types, including cars, trucks, SUVs, motorcycles, and boats.
See More

Royal Purple – High Performance 5W-20 Synthetic Engine Oil, Better Wear Protection, 1 Quart (Part No.01520)

High Performance 5W-20 Synthetic Engine Oil, Better Wear Protection, 1 Quart

from

$11.99
High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

Product Features:
  • Better wear protection
  • Increased protection against low speed pre-ignition
  • Increased fuel efficiency
  • Better protection for vehicle exhaust emissions equipment
  • Improved compatibility with fuels containing ethanol
  • Superior corrosion protection
  • Made in usa
See More

FRAM – 5W-20 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 5 Quart (Part No.F920-5QT)

5W-20 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 5 Quart

from

$27.99
FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation & shear stability over previous oil categories.

Product Features:
  • Faster oil flow at start-up.
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
  • Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
  • Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.
See More

FRAM – High Mileage 5W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F923-5QT)

High Mileage 5W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart

from

$27.99
FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Protection for High Mileage Engines: Designed for engines with over 75,000 miles, this oil provides the ultimate protection, making it ideal for higher mileage vehicles.
  • Advanced LSPI Prevention Technology: Contains additive technology to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines, helping to prevent premature engine fai
See More

FRAM – 5W-20 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F610-5QT)

5W-20 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart

from

$24.99
FRAM Engine Oil SAE 5W-20 utilizes a blend of high quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control.
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W20 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – 5W-20 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 1 Quart (Part No.F920)

5W-20 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) & turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:
  • Faster oil flow at start-up!
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
  • Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
  • Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.
See More

FRAM – 5W-20 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 1 Quart (Part No.F610)

5W-20 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 1 Quart

from

$6.49
FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W20 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

Royal Purple – HMX 5W-20 High Mileage Synthetic Motor Oil, Restores Engine Performance, 5 Quart (Part No.17518)

HMX 5W-20 High Mileage Synthetic Motor Oil, Restores Engine Performance, 5 Quart

from

$65.99
Royal Purple HMX SAE 5W-20 High-Mileage Synthetic Motor Oil, 5 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:
  • Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
  • Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology
  • HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
  • Reduces friction and metal-to-metal contact for peak engine performance
  • Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
  • Superior Engine Cleanliness: Fortified with stout detergents, this oil effectively removes engine build-up and deposits, maintaining cleanliness and promoting engine longevity.
  • High-Mileage Protection: Classified as a high-mileage oil, it provides specialized protection for older engines, ensuring they run smoothly and efficiently.
  • Synthetic Composition: With a synthetic oil composition and an SAE weight of 5W-20, it offers excellent performance and protection in a wide range of temperatures.
See More

FRAM – High Mileage 5W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 1 Quart (Part No.F923)

High Mileage 5W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 1 Quart

from

$7.49
FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Protection for Advanced Engine Designs: Specifically designed for gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, providing increased protection and preventing low-speed pre-ignition (LSPI) which can lead to premature engine failure.
  • Increased Wear Protection and Stability: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, ensuring long-lasting engine performance and reliability.
See More

Top-Rated Oil and Lubricants Brands For Your 2010 Jaguar XK

Shop for the best-rated brands offering Oil and Lubricants and other products for your 2010 Jaguar XKs. Below you’ll find some of our best rated Oil and Lubricants from Royal Purple and Valvoline, and more. Oil and Lubricants from these brands that fit a 2010 XK start at just $11.99 and are rated as high as 4.8 stars. OEM and aftermarket Oil and Lubricants don’t get more top quality, durable, and affordable than from the brands below.

Popular Royal Purple 2010 Jaguar XK Oil and Lubricants

When it comes to maintaining or upgrading your 2010 Jaguar XK, using quality Oil and Lubricants is essential to ensure durability and a perfect fit. Royal Purple ticks all of those boxes. We offer a wide selection of Royal Purple Oil and Lubricants, specifically designed for the 2010 Jaguar XK. With over 2 Royal Purple brand Oil and Lubricants in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.99, with an average price of just $26.99. Plus, with over 99 customer reviews and an average rating of 4.8 stars, you can trust that our Royal Purple Oil and Lubricants will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
High Performance 5W-20 Synthetic Motor Oil, Boosts Horsepower, 5 Quart
from $41.99
(51)
High Performance 5W-20 Synthetic Motor Oil, Boosts Horsepower, 5 Quart
“Great deal buy online and pick up in store.”

Popular Valvoline 2010 Jaguar XK Oil and Lubricants

Valvoline auto parts is one of the highest quality Oil and Lubricant brands in the market. Any 2010 Jaguar XK owner should feel confident when installing genuine Valvoline parts in their vehicle. To ensure the best fit and performance for your 2010 XK, Advance Auto Parts carries a full inventory of 1 Valvoline Oil and Lubricants. Plus you will be keeping your Jaguar in peak condition while saving money because prices on these Valvoline Oil and Lubricants range up to $59.99, plus, with more than 364 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Oil and Lubricants below will deliver on both quality and value.
SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon
from $59.99
(364)
SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon
“2004 WJ Jeep Grand Cherokee, with Dana 35 rear. Happy Diff, quiet again, and exactly what the build tag calls for “75W-140 SYN” I like that it has ad”

FAQs for 2010 Jaguar XK Oil and Lubricants

Which Oil and Lubricants are best-sellers for 2010 Jaguar XKs?

Out of 10 Oil and Lubricants that fit 2010 Jaguar XKs, the following parts are the top sellers:

What’s the price range for 2010 Jaguar XK Oil and Lubricants?

Oil and Lubricant prices for the 2010 Jaguar XK start at $6.49 and go up to $65.99 for the most premium parts.

What’s the average price of a Oil and Lubricant for a 2010 Jaguar XK?

The average price for Oil and Lubricants for the 2010 Jaguar XK is $28.24. Keep in mind the variety of part types within our Oil and Lubricant category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Oil and Lubricants for other Jaguar XK model years?

Yes, we currently carry Oil and Lubricants for 7 model years of Jaguar XKs between 2007 and 2015. Oil and Lubricants are bought most frequently for the following model years: 2015, 2014, 2013, 2012, 2011, 2009, 2008, and 2007.

What are the cheapest Oil and Lubricants for my 2010 Jaguar XK?

What are the top-rated Oil and Lubricants that fit the 2010 Jaguar XK?

Out of 463 reviews by customers, our 2010 Jaguar XK Oil and Lubricants have an average customer rating of . These are some of the highest-rated Oil and Lubricant types for the 2010 Jaguar XK and their top-rated products:

What types of Oil and Lubricants do you sell for my 2010 Jaguar XK?

As of 11/2/25, these are some of the most in-demand types of Oil and Lubricants for a 2010 Jaguar XK:

Can I get help with 2010 Jaguar XK Oil and Lubricant orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jaguar Oil and Lubricants and more.

What is your return policy for Jaguar XK Oil and Lubricants?

Advance Auto Parts keeps returns simple. For new Jaguar XK Oil and Lubricants and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.